SCOM 2012 Install problems - SQL Server 2012

I am trying to install SCOM 2012 R2 on Server 2012. I cannot connect to sql the log file shows below. I have SQL 2012 installed and patched. Has anyone seen this before?
[15:18:16]: Always:
:DatabaseConfigurationPage: Attempting to connect to database using server\instance itp-operations\mssqlserver. If we need it, the port is 1433
[15:18:16]: Debug:
:MSSQLSERVER on server itp-operations is in a running state
[15:18:16]: Info:
:Info:Opening/Testing Sql Connection on itp-operations, port:
[15:18:16]: Debug:
:Connection was not open. We will try to open it.
[15:18:16]: Debug:
:SqlConnectionReady returned True.
[15:18:16]: Debug:
:MSSQLSERVER on server itp-operations is in a running state
[15:18:16]: Debug:
:Connection was not open. We will try to open it.
[15:18:16]: Debug:
:SqlConnectionReady returned True.
[15:18:16]: Info:
:Info:Using DB command timeout = 1800 seconds.
[15:18:16]: Info:
:SQL Product Level: RTM
[15:18:16]: Info:
:SQL Edition: Standard Edition (64-bit)
[15:18:16]: Info:
:SQL Version: 11.0.2100.60
[15:18:16]: Always:
:Current Version of SQL=11.0.2100.60 Required Version=10.50.2500.0
[15:18:16]: Always:
:Entering GetRemoteOSVersion.
[15:18:16]: Info:
:Info: remoteOS = 6.3.9600
[15:18:16]: Info:
:Info:Using DB command timeout = 1800 seconds.
[15:18:16]: Info:
:Info:Using DB command timeout = 1800 seconds.
[15:18:16]: Info:
:The SQL Collation is valid.
[15:18:16]: Info:
:Info:Using DB command timeout = 1800 seconds.
[15:18:16]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.
[15:18:16]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.

Hi,
Please turn off firewall and retry it.
In addition, please also follow the below two links when installing SCOM 2012:
Walkthrough: Installing Operations Manager on a Single Server
http://technet.microsoft.com/en-us/library/hh457006.aspx
OpsMgr 2012: a quickstart deployment guide
http://blogs.technet.com/b/kevinholman/archive/2012/04/26/deploying-opsmgr-2012-a-quick-start-guide.aspx
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Problems installing MS SQl Server 2012

Hi.
I am trying to install MS SQL Server 2012, and I am getting the next error in the "Install Setup files" step:
"The following error has occurred:
An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32". Please refer to Help and Support for more information. HRESULT:"
Thanks in advance for your help

Folks:
I just spent 24 hours trying to research this problem. This has affected every product I want to use that interfaces to MS SQL Server 2012. My development machine is in need of recovery. I de-installed my old products and I have to recover
from backups. Every new product (2012 and 2013) I downloaded had failed on this ERROR when it touches a SQL Server install or some VC Redistributable kit;
***'Microsoft.VC80.ATL,version="8.0.50727.6229", publicKeyToken="1fc8b3b9a1e18e3b", processorArchitecture="amd64",type="win32"***
, for one reason or another (SqlSupport.msi).
After extensive Internet research and many drill downs, it sounds like this issue has been around for years on and off. It is now ON again. No solution worked which tells me it is a serious architectural issue or complex upward compatibility
issue. Because the installs actually work on my non-development machines that have little software installed.
It needs a cleanup routine, and a simple straight forward install routine. I found someone who reported this a bug and I am looking forward to a solution.
Go MS

Is it possible to install Microsoft SQL Server 2008 Express on windows server 2012 (not R2) ?

I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?

I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?
Yes you can install SQL server 2008 express on windows 2012 OS see below link
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx#Express32
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Setup problem - sql server 2014 - "could not find the database engine startup handle" - 0x851a0019

I tried to install ,deleted and re-installed several times and no help at all.
visual studio 2013 with update 2 rc and adk installed in my computer.
error code: 0x851a0019
error messege in setup: could not find the database engine startup handle
edition: Microsoft SQL Server 2014 Enterprise (Evaluation)
logs:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 13:53:29
End time: 2014-04-03 14:47:48
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: ARIELUBA-PC
Machine processor count: 8
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS Database Engine Services 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS SQL Server Replication 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 ADK MSSQL11.ADK Database Engine Services
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 ADK MSSQL11.ADK SQL Server Replication
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3412.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Arie Luba\Downloads\WS2012R2DC\SQLServer2014-x64-ENU\x64\setup\
Installation edition: Evaluation
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Hebrew_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME:
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: ARIELUBA-PC\Arie Luba
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Hebrew_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\SystemConfigurationCheck_Report.htm
2014-04-03 14:14:28.01 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Enterprise Evaluation Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
2014-04-03 14:14:28.01 Server UTC adjustment: 3:00
2014-04-03 14:14:28.01 Server (c) Microsoft Corporation.
2014-04-03 14:14:28.01 Server All rights reserved.
2014-04-03 14:14:28.01 Server Server process ID is 7148.
2014-04-03 14:14:28.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron N5110'.
2014-04-03 14:14:28.01 Server Authentication mode is WINDOWS-ONLY.
2014-04-03 14:14:28.01 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-04-03 14:14:28.01 Server The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
2014-04-03 14:14:28.01 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-04-03 14:14:28.01 Server Command Line Startup Parameters:
-s "MSSQLSERVER"
-m "SqlSetup"
-Q
-q "Hebrew_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-03 14:14:28.28 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-03 14:14:28.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-03 14:14:28.28 Server Detected 8099 MB of RAM. This is an informational message; no user action is required.
2014-04-03 14:14:28.28 Server Using conventional memory in the memory manager.
2014-04-03 14:14:28.31 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
2014-04-03 14:14:28.34 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-04-03 14:14:28.36 Server Query Store settings initialized with enabled = 1,
2014-04-03 14:14:28.36 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-03 14:14:28.36 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-03 14:14:28.38 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-03 14:14:28.39 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-03 14:14:28.39 spid8s Warning ******************
2014-04-03 14:14:28.39 spid8s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-03 14:14:28.40 spid8s Starting up database 'master'.
2014-04-03 14:14:28.42 Server Software Usage Metrics is disabled.
2014-04-03 14:14:28.48 Server CLR version v4.0.30319 loaded.
2014-04-03 14:14:28.56 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-03 14:14:28.62 spid8s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.63 spid8s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.64 spid8s SQL Trace ID 1 was started by login "sa".
2014-04-03 14:14:28.64 spid8s Server name is 'ARIELUBA-PC'. This is an informational message only. No user action is required.
2014-04-03 14:14:28.65 spid16s Password policy update was successful.
2014-04-03 14:14:28.66 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-04-03 14:14:28.66 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-03 14:14:28.66 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-03 14:14:28.67 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-03 14:14:28.67 spid16s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
________________________________________________________________________________________________

Is it okay? (see below)
;SQL Server 2014 Configuration File
[OPTIONS]
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Detailed help for command line argument ROLE has not been defined yet.
ROLE="AllFeatures_WithDefaults"
; Use the /ENU parameter to install the English version of SQL Server on your localized Windows operating system.
ENU="True"
; Parameter that controls the user interface behavior. Valid values are Normal for the full UI,AutoAdvance for a simplied UI, and EnableUIOnServerCore for bypassing Server Core setup GUI block.
UIMODE="Normal"
; Setup will not display any user interface.
QUIET="False"
; Setup will display progress only, without any user interaction.
QUIETSIMPLE="False"
; Specify whether SQL Server Setup should discover and include product updates. The valid values are True and False or 1 and 0. By default SQL Server Setup will include updates that are found.
UpdateEnabled="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; If this parameter is provided, then this computer will use Microsoft Update to check for updates.
USEMICROSOFTUPDATE="False"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, MDS, and Tools. The SQL feature will install the Database Engine, Replication, Full-Text, and Data Quality Services (DQS) server. The Tools feature
will install Management Tools, Books online components, SQL Server Data Tools, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,DQ,AS,RS,RS_SHP,RS_SHPWFE,DQC,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,DREPLAY_CTLR,DREPLAY_CLT,MDS
; Specify the location where SQL Server Setup will obtain product updates. The valid values are "MU" to search Microsoft Update, a valid folder path, a relative path such as .\MyUpdates or a UNC share. By default SQL Server Setup will search Microsoft Update
or a Windows Update service through the Window Server Update Services.
UpdateSource="MU"
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console.
INDICATEPROGRESS="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Specify the root installation directory for shared components. This directory remains unchanged after shared components are already installed.
INSTALLSHAREDDIR="C:\Program Files\Microsoft SQL Server"
; Specify the root installation directory for the WOW64 shared components. This directory remains unchanged after WOW64 shared components are already installed.
INSTALLSHAREDWOWDIR="C:\Program Files (x86)\Microsoft SQL Server"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services
(RS).
INSTANCENAME="MSSQLSERVER"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will incorporate the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; The computer name that the client communicates with for the Distributed Replay Controller service.
CLTCTLRNAME="SQLDRC"
; The Windows account(s) used to grant permission to the Distributed Replay Controller service.
CTLRUSERS="ARIELUBA-PC\Arie Luba"
; The account used by the Distributed Replay Controller service.
CTLRSVCACCOUNT="NT Service\SQL Server Distributed Replay Controller"
; The startup type for the Distributed Replay Controller service.
CTLRSTARTUPTYPE="Manual"
; The account used by the Distributed Replay Client service.
CLTSVCACCOUNT="NT Service\SQL Server Distributed Replay Client"
; The startup type for the Distributed Replay Client service.
CLTSTARTUPTYPE="Manual"
; The result directory for the Distributed Replay Client service.
CLTRESULTDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir"
; The working directory for the Distributed Replay Client service.
CLTWORKINGDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir"
; RSInputSettings_RSInstallMode_Description
RSINSTALLMODE="DefaultNativeMode"
; RSInputSettings_RSInstallMode_Description
RSSHPINSTALLMODE="SharePointFilesOnlyMode"
; Specify the installation directory.
INSTANCEDIR="C:\Program Files\Microsoft SQL Server"
; Agent account name
AGTSVCACCOUNT="NT Service\SQLSERVERAGENT"
; Auto-start service after installation.
AGTSVCSTARTUPTYPE="Manual"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT Service\MsDtsServer120"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT Service\MSSQLServerOLAPService"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Hebrew_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Specifies the server mode of the Analysis Services instance. Valid values are MULTIDIMENSIONAL and TABULAR. The default value is MULTIDIMENSIONAL.
ASSERVERMODE="MULTIDIMENSIONAL"
; CM brick TCP communication port
COMMFABRICPORT="0"
; How matrix will use private networks
COMMFABRICNETWORKLEVEL="0"
; How inter brick communication will be protected
COMMFABRICENCRYPTION="0"
; TCP port used by the CM brick
MATRIXCMBRICKCOMMPORT="0"
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="Hebrew_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT Service\MSSQLSERVER"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Provision current user as a Database Engine system administrator for %SQL_PRODUCT_SHORT_NAME% Express.
ADDCURRENTUSERASSQLADMIN="True"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT Service\ReportServer"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Add description of input argument FTSVCACCOUNT
FTSVCACCOUNT="NT Service\MSSQLFDLauncher"

Install MS SQL Server Web Edition on a server with MS SQL Server Express

Hi,
We have a VPS cloud server on which there is an instance of SQL Server Express.
Since we need more resources, I consulted with the hosting provider and they offered us to use SQL Server Web Edition (SPLA Lisence).
My question is - the hosting company claims that it is not possible to keep the SQL Server Express instance along side with the SQL Server Web Edition, and that we must do ugrade and remove the SQL Server Express instance.
This will cause us a long downtime, since there are multiple DBs on the SQL Server Express that we will have to backup, and then restore them one by one on the Web Edition after it is installed.
Is this correct? Can't we install the SQL Server Web Edition Instance and gradually move the DBs to it?
Thanks!

The 50 instances per machine is a setup check rule as opposed to a hardware limitation. From this perspective, there would be no difference between a VM or a physical server.
In the line from the documentation that you referenced, the "stand-alone server" refers not to VM vs. Physical, but instead a stand-alone instance vs. a clustered instance. That is, in a non-clustered environment, you can have up to 50 instances.
In the past when I helped with setup testing and automation, we'd run VMs with 20-ish instances, including instances from 2012, 2008 R2, 2008, and 2005, including multiple editions (Enterprise, Standard, Express, Web, etc.).
One other potential option if your provider cannot support multiple instances is to do an in-place upgrade (edition upgrade) of your existing Express instance. This would retain the current instance and upgrade the existing instance from Express
to Web without the need to migrate databases. Here is more info on the supported version and edition upgrade paths (including Express to Web):
http://technet.microsoft.com/en-us/library/ms143393.aspx
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Can i install new SQL server on my computer using service pack 2 or its just a patch

I want to install new sql server on my computer and I have sql server 2012 enterprise core edition with service pack 2 .Can I use it create a new server ?

If you have the same file which is avalable for download from the following link, it is just service pack:
Microsoft® SQL Server® 2012 Service Pack 2 (SP2)
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

Temporarily disable Digital Signature Checks to Install MS SQL Server 2008 with no Internet Access

I am attempting to install a licensed copy of MS SQL Server 2008 in a Private Enclave that does NOT have Internet access on a Win2008 R2 SP1 server (that is VM - thus I can't reboot and press F8 to select "Disable Driver Signature Enforcement"
). The installation fails with an error of the vc_red.cab file being found either corrupt or a bad digital signature. The file is good, but the signature has an expiration of 2011. I understand that a DOTNET SDK v1.1 program called setreg.exe
will enable disabling the digital signature check, but I am not permitted to use that program.
I might be permitted to use the "Signtool.exe" utility, but it is not clear what command sequences are necessary to disable and then re-enable the Digital Signature checks.
I saw a thread that recommended using the command:
bcdedit.exe /set nointegritychecks ON
However, the comments indicated that this might not have worked.
Are there Registry settings I can use with regedit to make the necessary changes to be able to install the application? I anticipate running into this problem with other software when I do not have Internet connectivity. I already tried
downloading the Microsoft CRL files; updated the lists on the Server; and rebooted. This did not solve my problem.

Hi,
As far as I know, it is not recommended to disable digital signature check.
Since we are not familair with installing MS SQL server, please also refer to SQL forums below to see if experts there have more insights regarding the matter.
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Silent install of SQL Server 2008r2 for ALL users?

We ship an installer that does a silent install of SQL Server 2008r2 with all the 'right' parameters pre-configured. We use this:
/QS /INSTANCENAME=MSSQLSERVER /ACTION=Install /FEATURES=SQL,BC,Conn,ADV_SSMS /SAPWD=MyPasswordGoesHere /SECURITYMODE=SQL /TCPENABLED=1 /ADDCURRENTUSERASSQLADMIN /SQLSVCSTARTUPTYPE=Automatic /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM" /AGTSVCACCOUNT="NT
AUTHORITY\SYSTEM" /IACCEPTSQLSERVERLICENSETERMS
However, the problem is that if a tech installs it for another user, that user does not have access, since ADDCURRENTUSERASSQLADMIN flag only adds the user who installed it -- rather than adding ALL users on the computer. (Or at least all admins.)
I tried replacing ADDCURRENTUSERASSQLADMIN with this:
/SQLSYSADMINACCOUNTS="BUILTIN\ADMINISTRATORS"
but that also failed to work. How can we install for all users, or at least all administrators?
NOTE: we do NOT know the name of the computer or the users. The installer has to work for any computer setup.
Similar question has already been asked, but wasn't helpful:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8354675f-be9b-4909-b776-942f03954807/how-to-do-a-silent-install-of-sql-2010-express-for-all-users-on-a-computer?forum=sqlexpress
The documentation does not make it clear what you can pass as allowed SQLSYSADMINACCOUNTS parameters. I also am not sure if I would need to change the AGTSVCACCOUNT or SQLSVCACCOUNT?

I tried one more thing:
/SQLSYSADMINACCOUNTS="BUILTIN\Administrators"
which does not halt installation with an error.
However, doing:
osql -E
create database test
go
in a command prompt from a different admin user on the same machine results in a permissions error... but works if done from a command prompt on the user account from which MSSQLServer was installed.
So for some reason /SQLSYSADMINACCOUNTS="BUILTIN\Administrators" does not work as expected.
Anyone have any idea why?
I checked the output log from the install, and found it had generated and used a configurationFIle to do the install. I looked in that file, and these were the settings, even though I did NOT pass /ADDCURRENTUSERASSQLADMIN as a command line option:
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS="BUILTIN\Administrators"
; The default is Windows Authentication. Use "SQL" for Mixed Mode Authentication.
SECURITYMODE="SQL"
; Provision current user as a Database Engine system administrator for SQL Server 2008 R2 Express.
ADDCURRENTUSERASSQLADMIN="True"

While installing the sql server 2008 management studio I am getting the below error.So what do I do?

Hi,
While installing the sql server 2008 management studio I am getting the below error.
unhandled exception has occured in your application.if you click continue,the application will ignore this error and attempt to continue.if you click quit,the aplication will close immediatly.
An error occured creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings:Could not load file or
assembly 'system.version=4.0.0.0. culture=neutral, publickey token=b77a5c561934e089' or one of its dependencies.the system cannot find the file supplied.
(C:\users\harsha\appdata\local\microsoft_corporation\landingpage.exe_strongname_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config
and finally it is giving the options like continue and quit the installation.
So what do I do?
regards,
harsha.

Hello,
Please try deleting the following sub folder to see if this will work:
C:\users\(my profile)\AppData\Local\Microsoft_Corporation
If you can't see AppData folder, you could use following steps to show hidden files:
1. Open an explorer window, hit "ALT-T" choose Folder Options then go to the view tab.
2. Turn on Show hidden files, folders or drives and
disable Hide protected Operating System files (recommended).
SQL Server 2008 setup fails with a Microsoft .NET Framework exception:
http://blogs.msdn.com/b/vsnetsetup/archive/2009/10/29/sql-server-2008-setup-fails-with-a-microsoft-net-framework-exception.aspx.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Instalation of SQL server 2005 Backward compatibility components in Windows Seven

Anyone can help me to install de SQL Server 2005 Backward Compatibility componentes in Windows 7 home, Intel Core Duo
It say that is not compatible.
Thanks in advance.

Hi,
We can see this feature pack was issued in Nov 2005 from the site, which may not be updated
to add Windows Vista/7 to supported operating systems. However, I can download and install X64 (64-bit)
Microsoft SQL Server 2005 Backward Compatibility Components on Windows 7 Enterprise 64-bit successfully.
If you get any error while installing, please let me know.
Thanks,
Chunsong
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

MOF syntax error occurred while installing 2008 SQL server Express on Vista Ultimate

I have tried cleaning, then installing 2008 SQL server Express on Vista Ultimate 3 times and spent hours on this. I have installed regular SQL server on 2003 server with no issues many times, but I have huge issues with 2008 SQL server Express. I keep getting the proceeding errors.
Any ideas?
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x0A2FBD17@1211@1
Configuration error description: A MOF syntax error occurred.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\Detail.txt
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x0A2FBD17@1211@1
Configuration error description: A MOF syntax error occurred.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\Detail.txt
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x0A2FBD17@1211@1
Configuration error description: A MOF syntax error occurred.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\Detail.txt
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\SystemConfigurationCheck_Report.htm

Similar error (not SQL Express but Enterprise) on my network reveals the following issue (still prevalent after removing and re-adding the machine to the network):
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/machinename.domainname.local. The target name used was cifs/MACHINENAME. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (DOMAINNAME.LOCAL), and the client realm. Please contact your system administrator.
ALSO: The session setup from the computer MACHINENAME failed to authenticate. The name(s) of the account(s) referenced in the security database is MACHINENAME$. The following error occurred: Access is denied.
This default instance (Ent SQL 2008 on Ent Server 64 bit 2003 R2 SP2) failed with the MOF error using a service account to install SQL 2008. Repair does not work.   "The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature."
I expected to have more luck with the information here: http://mark.michaelis.net/Blog/CategoryView.aspx?category=.Net but wound up with result seen in my next post.
Of note, tried the removal of leftover registry entries after a failed install as in link above, also removed sql folders prior to re-install. Error is the same and rather than list entire log here, there is a portion available below but as is evident, there is a permission error in the registry which verifies what mark michaelis has pointed out:
"Sco: Compile operation for mof file \etcls.mof.transformed failed. Exit code 3" "Configuration action failed for feature SQL_Engine_Core_Inst during timing ConfigNonRC and scenario ConfigNonRC." "A MOF syntax error occurred." "Configuration action failed for feature SQL_Engine_Core_Inst during timing ConfigNonRC and scenario ConfigNonRC." Here is more: at Microsoft.SqlServer.Configuration.Sco.WmiProvider.InstallMof() 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.EtwSetup.Install(String strInstanceName, Guid guidInstance, String strPath) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.SetupETW(EffectiveProperties properties) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.Install_ConfigNonRC_Prepare(EffectiveProperties properties) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.Install(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcb) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SqlFeatureConfigBase.Execute(ConfigActionScenario scenario, ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbCurrent) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream) 2009-03-31 10:51:19 Slp: Exception: Microsoft.SqlServer.Configuration.Sco.ScoException. 2009-03-31 10:51:19 Slp: Source: Microsoft.SqlServer.Configuration.Sco. 2009-03-31 10:51:19 Slp: Message: A MOF syntax error occurred.. 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key
(And so on - cannot read or write the registry key)...

While installing the SQL Server 2008R2 edition in Windows 7 professional servicepack1 is not installing?

Hi frnz ,
while am installing the SQL Server 2008R2 edition in Windows 7 professional servicepack1 machine is not instlling properly.
am follwing the installtion stups.
instiall two stups is going fine next .after completion of the following setup install comp( see the screen shoot below)nothing is happens ,its not going foreword further stups.
Can some one please help me out for this......
I will found in the Task manager the set up file is Running....

Hi Ychinnari,
Based on your description, you fail to install SQL Server 2008 R2 on Windows 7 SP1.
According to the screenshot, we need to verify that if SQL Server 2008 R2 setup disappears when installing setup support files. If so, please post the error message from SQLSetup.log file of the temp folder for analysis. Click on start->run and
type %temp % and press enter, you will navigate to the temp folder. For more details, you can review this
blog. Also, please help to collect the summary and detail logs, by default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
In addition, there are some proposals for you troubleshooting this issue.
1. Ensure that your system meets the
hardware and software requirements for installing SQL Server 2008 R2.
2. Make sure that you install SQL Server 2008 R2 with a admin account, and please choose “Run as administrator” to complete installation.
3. Make sure that previous installations of SQL Server has been uninstalled completely from your computer. For more details, please review the similar blog:
SQL Server 2008 R2 Setup starts and then disappears.
4. Stop any Anti-Virus software when installing SQL Server 2008 R2.
Thanks,
Lydia Zhang

Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment

Hi All,
I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
Some articles i referred.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
Thanks,
Dilip

Hi
i understand this is a sandbox environment but you should be able to install everything.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Install Guide - SQL Server 2014, Failover Cluster, Windows 2012 R2 Server Core

I am looking for anyone who has a guide with notes about an installation of a two node, multi subnet failover cluster for SQL Server 2014 on Server Core edition

Hi KamarasJaranger,
According to your description, you want configure a SQL Server 2014 Multi-Subnet failover Cluster on Windows Server 2012 R2. Below are the whole steps for the configuration. For the detailed steps about the configuration, please download
and refer to the
PDF file.
1.Add Required Windows Features (.NET Framework 3.5 Features, Failover Clustering and Multipath I/O).
2.Discover target portals.
3.Connect targets and configuring Multipathing.
4.Initialize and format the Disks.
5.Verify the Storage Replication Process.
6.Run the Failover Cluster Validation Wizard.
7.Create the Windows Server 2012 R2 Multi-Subnet Cluster.
8.Tune Cluster Heartbeat Settings.
9.Install SQL Server 2014 on a Multi-Subnet Failover Cluster.
10.Add a Node on a SQL Server 2014 Multi-Subnet Cluster.
11.Tune the SQL Server 2014 Failover Clustered Instance DNS Settings.
12.Test application connectivity.
Regards,
Michelle Li

SqlLocalDB.exe not Installed when sql Server 2012 Express (LocalDb Edition) is installed

I have been having a very frustrating time trying to connect to a localDB instance of SQL Server 2012. So I started again from scratch on another computer (Windows 7). I first installed sql server 2012 Express with tools (via ENU\x64\SQLEXPRWT_x64_ENU.exe)
and then installed the LocalDB Edition via sqlLocalDB.msi. The first installation seems to have gone OK. The second installation proceeded normally and finally advised that "Setup has installed SQL Server 2012 Express LocalDB successfully."
A whole lot of files were installed in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, including sqlservr.exe. But the SqlLocalDB.exe utility was
not amongst them.
Does anyone have any idea what is happening here? From where can I download a copy of sqlLocalDB.exe

A whole lot of files were installed in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, including sqlservr.exe. But the SqlLocalDB.exe utility was
not amongst them.
The tool is located in
C:\Program Files\Microsoft SQL Server\110\Tools\Binn
Olaf Helper
[ Blog] [ Xing] [ MVP]

SCOM 2012 Install problems - SQL Server 2012

Similar Messages

Maybe you are looking for