Screen Exit in ME41(Request For Quotation)

Dear All ,
I want a screen exit in tcode ME41(Request for Quotation) for a particular Requirement.I have already checked AMPL0001 and i am unable to locate the screen in the RFQ(ME41) that i have created & subsequently activated in the Exit.
Are there any other screen exits in ME41 .if any one knows about the utility of exit AMPL0001, Kindly guide me as to where the activated screen appears in the TCODE ME41.
Any help in this regard will be appreciated
Thanks in advance
Gaurav
Edited by: Gaurav Angrass on Dec 26, 2007 5:03 AM

No Other Screen Exits are available. In AMPL000, screen exits are available for Item Level. for this screen exit u have to insert the field in teh structure CI_AMPL. and activate the structute also.
in this case u activete screen exit, CI_AMPL structure and EXIT_SAPLMBAM_001, EXIT_SAPLMBAM_002.
- Selva

Similar Messages

  • Request For Quotation - ME41 - Item texts are not getting copied

    Hi,
    I created one RFQ (Request For Quotation) by copying from the existing one (through t-code ME41). But item texts are not copied.
    How can this issue be resolved..?
    In menu path ( Item --> Texts --> Adopt Text ), "Adopt Text" option is available. But its in disabled mode.

    just use F4 to get a valid entry, it is only grey to prevent manual typing

  • Master  table for RFQ(Request For Quotation). Field name is RFQ

    hi,
    I need to know the master table for RFQ(Request For Quotation) number . The field name is ANFNR . In the T.code ME42, i found that it is using the structure RM06E. But i need to know its corresponding master table

    the table EKKO (EKPO Items table) and you can find the Quote number in EBELN field. Don't go by the structure / field name on the screen
    Forgot to metnion that you need to use the right document category and the document type.
    Regards,
    Ravi
    Note : Please mark the helpful answers
    Message was edited by: Ravikumar Allampallam

  • Print automatically a request for quotation and purchase order

    hI,
    I create a new message ZNEU and I link a new form.
    I want the system creates automatically the message ZNEU when I save my request for quotation.
    In transaction NACE, I specify the output type ZNEU
    My Access sequence is 0001   DocType/PurchOrg/Vendor
    I specify a procedure RMBEA1 Purchasing RFQ
    Then I put in step 10 the condition type ZNEU and a requirement 101
    I just copy the message NEU in ZNEU.
    And in condition record ( tcode MN02)  I create the output type with combinaison purchasing output determintation document type.
    With all these datas I haven't anything when I save the RFQ?
    I have the same problem with purchase order.
    Anybody have an idea?
    Thanks a lot for your help
    Kari

    Hi,
    For RFQ create outut condition using MN01 transaction give your output tpe ZNEU and choose the option doc type as AN and give your purchase group.give transmission medium 1 and time 4.In communication method give printer name and tick print immediately and save.Then while creating RFQ for that purchase group message will come automatically.
    For PO create output condition using MN04 transaction and document type is EF.Repeat the same like RFQ.
    Hope it will solve your issue.

  • Request for quotation.

    Hi Experts ,
    Have  to send request for quotation
    With best regards,
    AVI DDS.

    Hi Avi,
    Let's complite this question first and post a new question for your second question.
    This second question Question is related to SD,
    You can check VA25 for quotation list means history.
    Utkarsh
    Edited by: Utkarshi1 on May 7, 2009 10:44 AM

  • Request for Quotation in 8.81

    Hi - With the Request for Quotation from multiple vendors in the A/P area of 8.81, do you know if the replies to the RFQ get stored in SAP or do they need to be entered manually? Also, what are the changes to RFQ from previous releases of SAP Business One.
    Thanks
    TG

    hello,
    I have created new posting period and series for financial year 2011-12.
    In previous year I have created 600 voucher. My issue is that when I am creating new
    voucher, voucher number is showing 601. I want that for new series voucher number should be
    start from 1. but it seems like numbering series doesn't affect the voucher number.
    Because there are no series creation for journal voucher. In this case how can I solve my problem.
    Please help me on this.
    thanks
    Annu

  • Request for quotation from enquiry or quotation level

    Hi,
    Can RFQ(request for quotation) be sent from enquiry or quotaion to suppliers for material procurement?
    Regards
    Suman

    hello,
    I have created new posting period and series for financial year 2011-12.
    In previous year I have created 600 voucher. My issue is that when I am creating new
    voucher, voucher number is showing 601. I want that for new series voucher number should be
    start from 1. but it seems like numbering series doesn't affect the voucher number.
    Because there are no series creation for journal voucher. In this case how can I solve my problem.
    Please help me on this.
    thanks
    Annu

  • Driver program for (request for quotation) /SMB40/MMRFQ_A smart form

    Dear friends,
    I found a standard smartform for request for quotation ie /SMB40/MMRFQ_A..but i am unable to find a driver program for this standard form..
    Also checked in TNAPR table and nace t code for driver program.
    pls tell me the driver prog for the above SF..
    Regards.
    Vinod

    Ok. That is because standard smartforms are not coming part of the package. You either install an ADD-On related to the preconfigured smartforms. If you have access to service.sap.com, you can download the preconfigured smartforms.
    The other option is to Migrate Script to Smartforms from Smartforms tcode...in MenuUtilities>Migration/
    After migration, you will get the layout....and you have to change the smartform from scratch.
    Vishwa.

  • Link purchase order with request for quotation

    Hi:
    I would like to know is there any FM or table where I can get the request for quotation with the purchase order or viceversa?
    Any clue will be great.
    Points for helpfull answers.

    Check the below Links :
    http://www.copacustomhelp.state.pa.us/infopak/nav/procurement/purchase%20ordering/file251/index.htm
    http://www.sap-img.com/materials/what-is-request-for-quotation.htm
    Check with table EKKO -EBELN (BSTYP = 'F',then this is purchase order )
    EKKO-ANGNR-> take this field ,this is quotation number
    Thanks
    Seshu

  • URGENT - XI to SRM : Interface for 'Request For Quotation'

    Hello Guyz!...
    I am trying to develop an interface in XI to post 'Request For Quotation' into SRM system. Can anybody help me on this.. Any kind of help is greatly appreciated. Thanks in Advance.

    Hi Praveen,
    No need to create a new inbound interface for posting the RFQ in SRM. You can use the SAP predefined inbound interface "RequestForQuotationResponse_CreateOrChange_In" present in the name space "http://sap.com/xi/EBP". Also it will have a corresponding proxy in SRM side which will call a stard function module.
    All you need to do here is create DT, MT, MI required for source and do the mapping.
    Regards,
    Jai Shankar.

  • Request For Quotation: Changes to the standard smartform YBUS_MMRFQ

    Hi Friends,
    I need to do changes in standard smart form of "Request For Quotation". Can any body please explain me how to do changes to the standard smart form with examples. This is my first object on smart forms. Please help me out.
    Thanks and regards,
    Linchon.
    Moderator message: these forums are no subsitute for proper training, please search for avaibable information or attend classes.
    Edited by: Thomas Zloch on Feb 27, 2012

    hello,
    I have created new posting period and series for financial year 2011-12.
    In previous year I have created 600 voucher. My issue is that when I am creating new
    voucher, voucher number is showing 601. I want that for new series voucher number should be
    start from 1. but it seems like numbering series doesn't affect the voucher number.
    Because there are no series creation for journal voucher. In this case how can I solve my problem.
    Please help me on this.
    thanks
    Annu

  • Request for Quotation 8.81PL6 not sending emails

    Hi experts,
    After following the techical documentation, I've managed to set up the new Request for Quotation functionality in SBO 8.81 PL06.
    But, even if I receive the event in B1if no email gets sent to the provider... nor any internal message communicating the error to the SAP user (in the documentation it is stated that the SAP user will receive an internal message communicating the error).
    May I be missing some configuration? While monitoring the biz-flow, I've noticed some "Connection Refused" errors when sending the email.. thus, making me think the process stops after not being able to send the email with the request for quotation.
    I've checked the mail configuration, and everything seems to be ok: It has no required SSL encryption and works over plain old port 25 with a single user and password. It works from other apps too, of course.
    Is there any additional configuration I should make? Am I missing something?
    Thank you in advance for your help
    Edited by: Jon Arranz on Sep 23, 2011 6:18 AM

    Hi,
    "Connection Refused" error is probably linked to email server you are trying to send. Check why the server refuse the connection through error log.
    Thanks,
    Gordon

  • Request for Quotation online

    Hi
    After following the techical documentation, I've managed to set up the new Request for Quotation functionality in SBO 8.81 PL06.
    But, even if I receive the event in B1if no email gets sent to the provider... nor any internal message communicating the error to the SAP user (in the documentation it is stated that the SAP user will receive an internal message communicating the error).
    May I be missing some configuration? While monitoring the biz-flow, I've noticed some "Connection Refused" errors when sending the email.. thus, making me think the process stops after not being able to send the email with the request for quotation.
    I've checked the mail configuration, and everything seems to be ok: It has no required SSL encryption and works over plain old port 25 with a single user and password. It works from other apps too, of course.
    Is there any additional configuration I should make? Am I missing something?
    Thank you in advance for your help

    Hi,
    If you get Connection Refused error, you need to check email server side. Check out why did the server refuse them.
    Thanks,
    Gordon

  • Manufacturer part number to appear on when creating a request for quotation

    my client want to be able to see the manufacturer part number already stored in the material master to appear on the request for quotation.

    If you maintain MPN Material number in Source List and is available in Pur Req it will be automatically seen in RFQ.

  • When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed.  The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

    When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
    The server responded with “502”
    The request for account “iCloud” failed. 
    The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
    The request for account “iCloud” failed.
    I am then given the option of staying Online or going Offline.
    Can anyone help me?
    thanks

    Hello b.krushel,
    Thank you for using Apple Support Communities
    Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
    These sections in particular:
    General Troubleshooting
    Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
    Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
    Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
    Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
    Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
    Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
    Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
    Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
    Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of  Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
    In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
    You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
    If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
    Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
    Open Calendar (or iCal).
    Open Calendar (or iCal) Preferences.
    Click Accounts. You should see an account with your iCloud member name entered.
    Turn iCloud Calendars off and back on
    Quit Calendar (or iCal).
    Choose Apple () menu > System Preferences > iCloud.
    Remove the checkmark in the checkbox next to Calendars.
    Close System Preferences and wait about a minute.
    Open System Preferences and choose iCloud.
    Replace the checkmark next to Calendars.
    Close System Preferences.
    Open Calendar (or iCal) and test to see if the issue has been resolved.
    Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
    Take care,
    Sterling

Maybe you are looking for