Screen Field Text Modification

Hi,
How can I change the Screen Field Text dynamically? Is there any attribute like Name for Text in the SCREEN table?
ex: on certain condition, the text should be "Override Assignment" and another the text of the field should be "Manual Assignment"
Please help me in this regard.
Thanks,
V.Nagaraju.

Hi,
Try the code given below.
Regards,
Wajid Hussain P.
DATA:   g_atwrt TYPE atwrt.
PARAMETERS: p_text(15).
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 1(15) g_text FOR FIELD s_vbcod .
SELECT-OPTIONS: s_vbcod FOR g_atwrt.
SELECTION-SCREEN: END OF LINE.
AT SELECTION-SCREEN OUTPUT.
g_text = p_text.
s_vbcod = g_text.
LOOP AT SCREEN.
" Do the following when your condition is satisfied
    IF screen-name CS 'S_VBCOD'.
      screen-name = g_text.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

Similar Messages

How to create value request for screen field text box tt1

How to create value request for screen field text box tt1
i have a text box name tt1,
i want f4 help for that .
remember i am asking for screen i.e done from screen layout not selectio-screen.
Thank you,
Regards,
Jagrut Bharatkumar Shukla,

Hi,
Create one Search Help in the SE11 for the particular Field that u want to display. In the Screen(Transaction SE51),For that Text Box in the Attributes,in Dict Tab ->Search Help Field give that Search Help Name.
For Eg,
If u want Purchase Order Numbers in that F4 Help.Create one Search Help by giving Table Name as EKKO & Search Help Parameter as EBELN with Lpos & Rpos as 0 & 1.Save & Activate it.
Give this Search Help Name in Dict Tab ->Search Help Field of that Screen Attributes.
Regards,
Padmam.

How to change the screen field text in runtime

Hi ,
I want to change the screen button text in runtime IN ABAP dynpro screens. if anybody know this please post some helpful answer
Regards,
Anil kumar G

Hi Anil..
We can change the Text of a Pushbutton dynamically.
For this:
1. Declare a Global variable with the Same name as the Button in TOP include
Eg: Data: Button1(30).
2. In the PBO module of the Screen assign the Text to this variable:
 Eg:
 Module set_text OUTPUT.
 Button1 = 'This is the text'.
 ENDMODULE.
REWARD IF HELPFUL.

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

How to get the field texts from abap dictionary into screen Text fields

Hi SapAll.
here i have got to modify one zscreen by adding 1 more field,when i added one field in teh screen by just writng the code in program as SELECT-OPTIONS ilart FOR CAUFVD-ILART.
but iam unable to get the field text for the text field from teh table CAUFVD.
CAN ANY BODY HELP ME IN THIS.
regards.
varma

Hi Varma,
Even if you want to personalise the Text also you can do without checking the DICTREF checkbox. Dirctly you can give the text in the Text elements by using the Menu GOTO -> Text Elemetns -> Selection Texts.
Regards
Thiru

Adding custom text besides selection screen field

Hi All,
I need to add some custom text to the selection screen field "CtegoryID" in the Product search screen(thru the link "Internal Goods")....I sthis possible thru change os some template?If yes,which one??
Regards,
Disha.

Well...
I don't remember an existing search help with some fields using a combo-box.
In the FM assigned to the search help (the search help exit), you can pre and post process some data.
IF callcontrol-step = 'PRESEL', 'SELONE', 'SELECT'.....
But I don't see anything for seach a feature.
In conclusion, I don't think this is supported by generic search help.
Rgds
Christophe
PS: please reward points for helpfull answers

Selection screen fields

Hi,
I want to group the selection screen fields. where should i group.
I want to group using the modif Id
T Y P E S
TYPES:
BEGIN OF TYVBAK,
VBELN TYPE VBAK-VBELN,
AUART TYPE VBAK-AUART,
AUDAT TYPE VBAK-AUDAT,
KUNNR TYPE VBAK-KUNNR,
NETWR TYPE VBAK-NETWR,
END OF TYVBAK.
D A T A      D E C L A R A T I O N S
DATA:
STVBAK TYPE TYVBAK,
ITVBAK TYPE TABLE OF TYVBAK.
S E L E C T I O N    S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
SKUNNR FOR STVBAK-KUNNR.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:
SVBELN FOR STVBAK-VBELN,
SAUDAT FOR STVBAK-AUDAT.
SELECTION-SCREEN END OF BLOCK B2.
I N I T I A L I Z A T I O N
*INITIALIZATION.
FILLING SELECT OPTIONS WITH DEFAULTS
SKUNNR-SIGN = 'I'.
SKUNNR-OPTION = 'BT'.
SKUNNR-LOW    = '1'.
SKUNNR-HIGH   = '4000000'.
APPEND SKUNNR.
T O P   O F P A G E
TOP-OF-PAGE.
WRITE:/1'SALES DOC',12 'DOC TYPE',20 'SALES DATE',32 'NETWORTH',60 'CUSTOMER'.
*A T   S E L E C T I O N    S C R E E N    O U T P U T .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'SVBELN-LOW'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-NAME = 'SVBELN-HIGH'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
where should i group SBVELN and SAUDAT

Hi
Instead of SCREEN-NAME use SCREEN-GROUP1 and for your select options give MODIF ID.
As follows
SELECTION-OPTIONS: selcrt for dobj MODIF ID MOD1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CHECK SCREEN-GROUP1 = 'MOD1.
SCREEN-REQUIRED = 1.
MODIFY SCREEN.
ENDLOOP.
This is COZ when you use select-options you get TWO fileds on the INPUT screen LOW and HIGH so you have to check for selcrit-low and selctri-high you can avoid all this my assigning a MODIF ID.
See this sample programs for this
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: pa_file TYPE rlgrap-filename MODIF ID abc,
pa_lifnr TYPE lfa1-lifnr MODIF ID abc,
pa_vkorg TYPE vbak-vkorg MODIF ID abc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: pa_kunnr TYPE vbak-kunnr MODIF ID def.
SELECT-OPTIONS: s_lifnr FOR gs_lfa1-lifnr MODIF ID def,
s_date FOR gs_lfa1-erdat MODIF ID def,
s_augru FOR gs_vbak-augru MODIF ID def,
s_vbeln FOR gs_vbak-vbeln MODIF ID def.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_upd RADIOBUTTON GROUP g1 USER-COMMAND uc01 DEFAULT 'X'."#EC *
SELECTION-SCREEN COMMENT 3(60) text-004 FOR FIELD pa_upd.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_rep RADIOBUTTON GROUP g1 ."#EC *
SELECTION-SCREEN COMMENT 3(60) text-005 FOR FIELD pa_rep.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b3.
IF pa_rep EQ gc_x.
LOOP AT SCREEN.
IF screen-group1 = gc_abc.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_def.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_upd EQ gc_x.
*For Reprocessing
LOOP AT SCREEN.
IF screen-group1 = gc_def.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_abc.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
CLEAR pa_upd.
ENDLOOP.
ENDIF.
REPORT zrich_001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X'
user-command chk,
p_rad2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_datum1 FOR sy-datum MODIF ID d1,
s_datum2 FOR sy-datum MODIF ID d2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_rad1 = 'X'
AND screen-group1 = 'D2'.
screen-active = '0'.
ENDIF.
IF p_rad2 = 'X'
AND screen-group1 = 'D1'.
screen-active = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Hiding selection screen fields upon clicking a button

Hi .
I have a requirement like we need to hide and bring back the selection screen fields upon clicking a button( Expand and collapse in the same button) .
in ABAP Query,we can maintain this, for the variant we created.
We need this functionality on the selection-screen presently.
How to achieve this in the selection -screen?
Valuale pointers are desparately needful.
Regards,
SSR.

Hi,
SELECTION SECREEN (P_) Parameter
(S_) Select Options
SELECTION-SCREEN : BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001,
BEGIN OF LINE,
COMMENT (26) C1 MODIF ID XYZ.
SELECT-OPTIONS : S_MATNR FOR MARA-MATNR MODIF ID XYZ NO-EXTENSION .
SELECTION-SCREEN : END OF LINE,
BEGIN OF LINE,
COMMENT (26) C2 MODIF ID XYZ.
SELECT-OPTIONS : S_MATKL FOR MARA-MATKL MODIF ID XYZ NO-EXTENSION .
SELECTION-SCREEN : END OF LINE.
PARAMETERS : R_MATNR RADIOBUTTON GROUP RAD1 DEFAULT 'X'
MODIF ID ABC USER-COMMAND MAT,
R_MATKL RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN END OF BLOCK blk1.
INITIALIZATION.
C1 = 'Product Code'.
c2 = 'Product Group'.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME0(7) = 'S_MATNR' OR SCREEN-NAME0(7) = 'S_MATKL'.
SCREEN-INPUT = '0'.
SCREEN-INVISIBLE = '1'.
ENDIF.
CASE SCREEN-NAME+0(7).
WHEN 'S_MATNR'.
IF R_MATNR = 'X'.
SCREEN-INPUT = '1'.
SCREEN-INVISIBLE = '0'.
ENDIF.
WHEN 'S_MATKL'.
IF R_MATKL = 'X'..
SCREEN-INPUT = '1'.
SCREEN-INVISIBLE = '0'.
ENDIF.
ENDCASE.
IF R_MATNR = 'X'.
IF SCREEN-NAME = 'C1'.
C1 = 'Product code'.
C2 = SPACE.
ENDIF.
ENDIF.
IF R_MATKL = 'X'.
IF SCREEN-NAME = 'C2'.
C2 = 'Product Group'.
C1 = SPACE.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
Hope it helps.
best regards,
Nagaraj Kalbavi

Alv-field text-80 characters needed.

Hi experts,
in my alv report, field text is coming like below.
Emp (excl. apprentices & temp. emp on si----upto this only it is coming.
i need like this.
Emp (excl. apprentices & temp. emp on site) - Beginning of year
how to get like this -
i need the complete text....
i am writing like this
gs_fieldcat-fieldname = 'E_BEG_YEAR'
gs_fieldcat-tabname   = 'GT_FINAL_HCT'.
gs_fieldcat-outputlen = '70'.
gs_fieldcat-seltext_l = text-006.
gs_fieldcat-do_sum    = 'X'.
APPEND gs_fieldcat TO gt_fieldcat.
CLEAR gs_fieldcat.
can u give any modification for this.suggest me........................................

Hi,
First check the internal table i.e. the field that is holding the value of text. Check whether its length is sufficient or not.
Second declare the layout for e.g.
w_layout TYPE slis_layout_alv.
and do.
w_layout -colwidth_optimize = 'X'.
and pass the layout to the alv function module .
I hope this will help you.
Help children of U.N World Food Program by rewarding them and encourage others to answer your queries

F4 Help for the selection screen field

Hi Gurus,
I have to display F4 help for a selection screen field. i am using following code:
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
         EXPORTING
              retfield        = 'CODE'
              dynpprog        = lw_repid
              dynpnr          = sy-dynnr
              VALUE_ORG       = 'S'
         TABLES
              value_tab       = gi_text
             field_tab       = li_fields_tab
              return_tab      = pi_return_tab
         EXCEPTIONS
              parameter_error = 1
              no_values_found = 2
              OTHERS          = 3.
My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
001    test
001    test1
but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
Please help me out.
Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.

Sachin,
I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
REPORT zktest01 .
DATA :
BEGIN OF value_tab OCCURS 0,
    field LIKE e070-trkorr,
    text   LIKE e07t-as4text,
END OF value_tab.
DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
      t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
      t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
PARAMETERS : p_field LIKE value_tab-field,
             p_text   LIKE value_tab-text. "NO-DISPLAY.
INITIALIZATION.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'FIELD'.
t_fldtab-langu     = 'E'.
t_fldtab-position = 1.
t_fldtab-offset    = 0.
t_fldtab-fieldtext = 'Key'.
t_fldtab-reptext   = 'Key'.
t_fldtab-leng      = 20.
t_fldtab-intlen    = 20.
t_fldtab-outputlen = 20.
t_fldtab-datatype = 'CHAR'.
t_fldtab-inttype   = 'C'.
t_fldtab-headlen   = 20.
t_fldtab-keyflag   = 'X'.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'TEXT'.
t_fldtab-position = 2.
t_fldtab-offset    = 20.
t_fldtab-fieldtext = 'Text'.
t_fldtab-reptext   = 'Text'.
t_fldtab-leng      = 60.
t_fldtab-intlen    = 60.
t_fldtab-outputlen = 60.
t_fldtab-headlen   = 60.
t_fldtab-keyflag   = ' '.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
value_tab-field = '101'.
value_tab-text = 'dddd'.
APPEND value_tab.
value_tab-field = '202'.
value_tab-text = 'aaaa'.
APPEND value_tab.
t_dynmap-fldname = 'FIELD'.
t_dynmap-dyfldname = 'P_FIELD'.
APPEND t_dynmap.
t_dynmap-fldname = 'TEXT'.
t_dynmap-dyfldname = 'P_TEXT'.
APPEND t_dynmap.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'FIELD'
            dynpprog        = 'ZKTEST01'
            dynpnr          = '1000'
            dynprofield     = 'P_FIELD'
            value_org       = 'S'
       TABLES
            field_tab       = t_fldtab
            value_tab       = value_tab
            return_tab      = t_rettab
            dynpfld_mapping = t_dynmap
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
ENDIF.
START-OF-SELECTION.
Jeffrey Satriadi

Screen Fields Not getting Updated with DYNP_VALUES_UPDATE

Hi All,
I am using FM DYNP_VALUES_READ to read the screen field values and then modifying those values and passing the modified table to DYNP_VALUES_UPDATE. But the problem is screen fields are not populated with these values . The values I wish to populate are footer values . I am using OO ALV for this wherein I am handling an event for filter of records and accordingly I need to modify my footer. Any Suggestions??
*& Form footer
 Caslculate Total items, number of hits/Miss and percent MSP
--> p1 text
<-- p2 text
FORM footer .
CLEAR : io_totitems,
 io_tothit,
 io_totmiss,
 io_permiss.
IF NOT l_flag EQ 1.
Get total items
DESCRIBE TABLE i_outdata LINES io_totitems.
LOOP AT i_outdata INTO wa_outdata.
calculate number of hits
 IF wa_outdata-hit_miss = 'HIT'.
 io_tothit = io_tothit + 1.
 ENDIF.
calculate number of Miss
 IF wa_outdata-hit_miss = 'MISS'.
 io_totmiss = io_totmiss + 1.
 ENDIF.
 CLEAR wa_outdata.
ENDLOOP.
calculate percent MSP
io_permiss = ( ( io_totitems - io_totmiss ) / io_totitems ) * 100 .
IF l_flag EQ 1.
 wa_dynpread-fieldname = 'IO_TOTITEMS'.
 APPEND wa_dynpread TO t_dynpread.
 wa_dynpread-fieldname = 'IO_TOTHIT'.
 APPEND wa_dynpread TO t_dynpread.
 wa_dynpread-fieldname = 'IO_TOTMISS'.
 APPEND wa_dynpread TO t_dynpread.
 wa_dynpread-fieldname = 'IO_PERMISS'.
 APPEND wa_dynpread TO t_dynpread.
 CLEAR wa_dynpread.
 d020s-prog = sy-repid.
 d020s-dnum = sy-dynnr.
 CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = d020s-prog
 dynumb = d020s-dnum
 translate_to_upper = 'X'
 REQUEST = ' '
 TABLES
 dynpfields = t_dynpread.
 MOVE io_totitems TO io_totitem.
 CONDENSE io_totitem NO-GAPS.
 MOVE io_tothit TO io_tothits.
 CONDENSE io_tothits NO-GAPS.
 MOVE io_totmiss TO io_totmis.
 CONDENSE io_totmis NO-GAPS.
 MOVE io_permiss TO io_permis.
 CONDENSE io_permis NO-GAPS.
 LOOP AT t_dynpread INTO wa_dynpread.
 CASE: wa_dynpread-fieldname.
 WHEN 'IO_TOTITEMS'.
 wa_dynpread-fieldvalue = io_totitem .
 MODIFY t_dynpread FROM wa_dynpread.
 WHEN 'IO_TOTHIT'.
 wa_dynpread-fieldvalue = io_tothits.
 MODIFY t_dynpread FROM wa_dynpread.
 WHEN 'IO_TOTMISS'.
 wa_dynpread-fieldvalue = io_totmis.
 MODIFY t_dynpread FROM wa_dynpread.
 WHEN 'IO_PERMISS'.
 wa_dynpread-fieldvalue = io_permis .
 MODIFY t_dynpread FROM wa_dynpread.
 ENDCASE.
 CLEAR wa_dynpread.
 ENDLOOP.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = d020s-prog
 dynumb = d020s-dnum
 TABLES
 dynpfields = t_dynpread
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDIF.
Get all fotter details in a internal table
this is used to download footer in Excel
wa_footer-fldname = 'Total Items '.
wa_footer-value = io_totitems.
APPEND wa_footer TO i_footer.
wa_footer-fldname = 'Number of HIT'.
wa_footer-value = io_tothit.
APPEND wa_footer TO i_footer.
wa_footer-fldname = 'Number of MISS'.
wa_footer-value = io_totmiss.
APPEND wa_footer TO i_footer.
wa_footer-fldname = 'Percentage MISS '.
wa_footer-value = io_permiss.
APPEND wa_footer TO i_footer.
CLEAR wa_footer.
ENDFORM. " footer

data: t_dynfields1 type table of dynpread with header line.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = d020s-prog
dynumb = d020s-dnum
translate_to_upper = 'X'
REQUEST = ' '
TABLES
dynpfields = t_dynfields1.
read table t_dynfields1 index 1 I hope this is missing
I will be selecting from a list .
Because once the value is read we need to update the screen field with that value .
Here the selected value will be in the first place
Now
Your operation is to populate the fields with some variables .
In the same when I do this there is only one value then
Im expecting only one entry here
LOOP AT t_dynpread INTO wa_dynpread.
CASE: wa_dynpread-fieldname.
WHEN 'IO_TOTITEMS'.
wa_dynpread-fieldvalue = io_totitem .
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_TOTHIT'.
wa_dynpread-fieldvalue = io_tothits.
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_TOTMISS'.
wa_dynpread-fieldvalue = io_totmis.
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_PERMISS'.
wa_dynpread-fieldvalue = io_permis .
MODIFY t_dynpread FROM wa_dynpread.
ENDCASE.
CLEAR wa_dynpread.
ENDLOOP. */
Comment this for a while and
Change the code as
t_dynfields1-fieldname = ' '. "<--- header name
t_dynfields1-fieldvalue = ' '."<----val
append t_dynfields1.
t_dynfields1-fieldname = ' '.
t_dynfields1-fieldvalue = ' '.
append t_dynfields1.
t_dynfields1-fieldname = ' '.
t_dynfields1-fieldvalue = ' '.
append t_dynfields1.
And check .
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = d020s-prog
dynumb = d020s-dnum
TABLES
dynpfields = t_dynfields1.
regards,
vijay

Displaying error message while entering selection screen fields

Moderator message: don't offer points
hi experts...
i generated a report.
in that report, the selection screen fields are plant and material type..
now my rqmt is like this :
if user enters any plant except '8210' in the selection screen, then a pop up should appear like.. enter 8210 plant only, and the cursor should remain in the same screen allowing user to enter correct plant.
and then same with the case of material type also..user should enter 'mcfe' material type only..
im using message classes like this:
if so_bwkey-low ne '8210' or so_bwkey-high ne '8210'.
message i000(zts).
endif.
if so_mtart-low is not initial and so_mtart-high is not initial and so_mtart-low ne 'mcfe'
or so_mtart-high ne 'mcfe'.
message i001(zts).
endif.
with this logic, when i enter plant..it is prompting
1) enter plant 8210 only..
and then when i press enter key it is again prompting
2)enter material type mcfe only..
but iam not entering material type here..
i want to get 2nd error message if and only if i enter material type..
help me regarding this issue..
<<text removed>>
thanks in advance,
harini.
Edited by: Matt on Feb 9, 2009 10:14 AM

Hi,
Use Error type message in SELECTION SCREEN EVENT.It will place the cursor in the relevant Field.
At SELECTION-SCREEN ON SO_BWKEY-Low.
if so_bwkey-low ne '8210' .
message E000(zts).
endif.
At SELECTION-SCREEN ON SO_BWKEY-HIGH.
if so_bwkey-high ne '8210'.
message E000(zts).
endif.
At SELECTION-SCREEN ON so_mtart-LOW.
if so_mtart-low is not initial and so_mtart-low ne 'mcfe' .
message E001(zts).
endif.
At SELECTION-SCREEN ON so_mtart-HIGH.
if so_mtart-high is not initial
and so_mtart-high ne 'mcfe'.
message E001(zts).
endif.
This will resolve the issue..
Regards,
Gurpreet

Field Text is a required field for G/L account (VF02 release to accounting)

Hi gurus,
the following error message shows in VF02 when releasing to accounting:
"Field Text is a required field for G/L account in E178 (=CoCd) 4420000000".
We checked the G/L master (FSS0) - information tab - G/L Account texts in Company Code (for G/L 442*) but did not work. Any idea of which text is to be maintained?
Thanks,
VL

hi,
this is to inform you that,
in SPRO - financial accounting - g/l accounting - master data - g/l accounts - preparations - addational activities - define screen layout for each transaction.
or
OB26.
make the field text mandatory and fill the data in it.
confirm
balajia

Add New Screen Fields in Delievery Line Item

Hello All,
We have a requiremnet where we should add 3 custom fields to delivery line item tabs,
please let me know how I can add a new tab for delievry line item tabs and how to add new custom screen fields in that tab,.
Thanks
Add New Screen Fields in Delievery Line Item
Edited by: kishore_99 on Dec 8, 2009 5:31 PM

No, I won't explain it in detail - you need to read the documentation and at least make an attempt at the process on your own first. The documentation is right there in the IMG where I said it was but here's the path since you can't find it:
Logistics Execution -> Shipping -> System Modifications -> Business Add-Ins in Shipping -> BADI for Additional Item Detail Screen...

Screen Field Text Modification

Similar Messages

Maybe you are looking for