Screen Painter how to, manual or flash book
Is there a screen painter manual, how to or flash book?
I started using it but the help is to simple, for now I want to create a form that will ask for an inventory code and bring in description and barcode field. Then the last field will ask for a quantity, that I will read with my add on to print barcode labels.
Regards,
William Burgos
Hi William Burgos
Screen painter is very basic. It only creates a screen. So all you do is make a new form, drop things on it like a text box, combo box, matrix and so on. But screen painter itself has no logic and you can't set it to do certain actions.
Screen painter only creates the form. Then you through code must load the form that screen painter created, this form is actually a XML form. Through code you must also apply all the logic.
Hope this helps
Similar Messages
-
How to manually remove Flash?
Is there a way to manually remove every part of Adobe Flash from OSX so that I can reinstall? I have posted the following on Adobe's forums but haven't managed to get a single reply!
Flash is crashing when I try playing video in Safari, Firefox or Google Chrome.
Chrome says that I have two almost identical versions of flash installed.
I have downloaded the uninstaller - it completes and says it has uninstalled, but does absolutely nothing.
Installing new versions does nothing either, I have rebooted in between etc but nothing. I've even tried removing the browsers and reinstalling.Ok, getting some where, if not further
Finally found the plug-in, in Chrome's package contents (by right-clicking Chrome in finder and clicking 'show package contents').
Firefox and Safari must have been sharing it somehow, as removing this stopped flash working in them also!!
Have now removed Chrome & Firefox altogether. Re-ran flash uninstaller. Yay! No flash! Rebooted, installed Flash. First use - crashed!! Closed and reopened Safari - second run, video stuttering.
I know Mr Jobs doesn't want us to have Flash anyway, but I need it for some sites and this is really doing my head in :/ -
How to manually add audio book to the ipod
How do I manually add an audiobook to my ipod?
First make sure your iPod is set to manually manage by enabling the Manually manage music and videos option from under the iPod's Summary tab. Once you have done this, you can manually click and drag the audiobook and its tracks over to your iPod from under the Devices section in the lefthand pane of iTunes.
B-rock -
Multiple select option in the screen painter
Hi all,
I want to give multiple select option for a particular field in the screen painter.
how to provide it.
NitinHi,
Refer to this link..[Select-Option in Dialog programming |Re: Select-Option in Dialog programming]
[How to make select option in module pool |how to make select option in module pool] -
Coding in form created in screen painter
I have created a form in screen painter.How can I do coding in this form.I have added a save button in the form.How can I fire the click event on this button.The file created has extension srf and it can not be opened in asp.net.
Hi Dilip,
Although the file has a srf file extension it is actually an XML file. You can use this file to create an instance of your form through code. In the UI API there is a Application object. This object has a method called LoadBatchActions which takes one parameter which is your srf file (ie the path and filename). Calling this method will create a form in the active UI based on your srf file. You can then create an instance of the Form object in the UI API and use this to manipulate your form through code.
I also recommend you look at the SDK learning material here on the SDN and also look at the samples that come with the SDK.
Kind Regards,
Owen
P.S. Please note that you've posted your question in the application forum for SAP Business One. This forum is for discussions on the application functionality of SBO and not the SDK. Instead, please post queries about screen painter and other development questions here:
SAP Business One SDK
Thanks -
Graphical screen painter activate 46B
hi
i work in SAP 46B version; i don't find graphical screen painter
how can i active graphical painter instead of alphanumeric screen painter ?
thinksGo to the menu Utilities->Settings in se51 and check the settings and check the checkbox for Graphical Layout Editor.
Regards,
Ravi Kanth Talagana -
How do you open graphical screen painter
Hi all-
I'm using PlatinGUI 6.30r2. How do I open the graphical screen painter (after going into object navigator, I want to place controls on a screen)?
I clicked Layout, but get what appears to be a bunch of horizontal lines-- nothing like a screen painter.
thanks,
KevinActually, the GUI provided on the CD is 6.30r4. After trying to install I got this:
rpm Uvh path/PlatinGUI-Linux-6.30-4.i386.rpm
>./gui
JAVA=/usr/lib/java/bin/java: Command not found
PH=/opt/sapgui/6.30rev4/jar: Command not found
SOI=/opt/staroffice7/program/classes: Command not found
JAVA: undefined variable
I read elsewhere on one of these forums that the free GUI on the sneak preview doesn't work so well with the database (and learned this by sad experience myself), so I downloaded and installed an earlier version from the website:
ftp d ftp.sap.com
name: anonymous
pw: email account
cd to /pub/sapgui/
get PlatinGUI-Linux-630r2.jar
I installed that with java jar PlatinGUI-Linux-630r2.jar, but I didn't see any prompts about installing specific components, so I have no idea what you are referring to (must be on the software that people pay for). That is the version I am currently using, and it is working fine except for this graphical screen painter is not coming up. Now my ABAP book is from 2002, so I'm sure it is included somewhere. Do you have any suggestions? Don't worry, you will get your points.
thanks- -
How to create a drop down box and text box in screen painter?
Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
land1 TYPE t005t-land1,
natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
FROM t005t
INTO TABLE i_t005t
WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
w_natio-key = i_t005t-land1.
w_natio-text = i_t005t-natio.
APPEND w_natio TO i_natio.
CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
values = i_natio
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
mark type c , "This is to select the record.
matnr like mara-matnr ,
matkl like mara-matkl,
maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O -
Hi Everyone,
This problem just started today. When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user). This suddenly started today and has not stopped since. This keeps happening every single time I turn on or restart my computer.
Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday. When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates. Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again. So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process).
Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
-Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-Security Update 2014-002 (Version 1.0) installed April 22, 2014
I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each? Or is this new problem totally unrelated? It's just that this problem started a day after these 2 updates were installed twice.
My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now. The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful!
Thank you so much for reading this and for any help you can provide.
hope everyone is well,
ElaineHey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
At startup I get grey screen and a folder with a flashing question mark. How do I reset my MacBook Pro to the manufacture defaults?
Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
(113954) -
My iPod has a glitch in the App Store. When I go to the App Store and click on updates then click on purchased it won't load up my purchased apps it says it is loading then it flashes black and goes to my home screen. How can I fix it??
Have you udated to iOS 6.0.1?
Otherwise
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
How to show screen design in .srf (from Screen Painter) using SDK?
How to show screen design in .srf (from Screen Painter) using SDK?
You need to use the LoadBatchActions method of the Application object to load .SRF files.
John. -
How to insert tabstrip control in module pool screen painter
Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT -
How to read the contents of Input Field created via Screen Painter?
Hi All,
I have a module program / dialog program, on my second screen, I created an input/outbox field via screen painter of course,
now in my PAI, how can I read the contents of the input/outbox field?
Let's say the name of my input/outbox field is: P_WEKRS. Note: Get Parameter and Set Parameter is ticked.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TC_DATA.
MODULE MODIFY_DATA.
ENDLOOP.
I want to get the value of the input/outbox field before my loop in table control? I thought that it will work like normal parameter in non-dialog programs.
Any helpful inputs will be appreciated/rewarded.
Thanks.
JaimeHi, Jaime
Do the following Change in you Follow Logic
PROCESS AFTER INPUT.
MODULE read_or_change_value. " Add this
LOOP WITH CONTROL TC_DATA.
MODULE MODIFY_DATA.
ENDLOOP.
Add the Bellow Module code in you Driver Program.
MODULE read_or_change_value.
DATA: P_WEKRS like " the Field on Screen. Must be the same name as on SCREEN. and Type must be same too.
" Here you will find the Value in that Variable or if you will change the Value here you will find it change on Screen
END MODULE.
Please Reply if any Issue..
Best Regards,
Faisal -
How to swap fields in screen painter.
hello gurus,,
how to swap fields in screen painter.Hi
Go through the link given below :
http://www.standardware.com/pdf/stdwsp.pdf
With Regards
Nikunj Shah
Maybe you are looking for
-
Blue screen of death on Toshiba P755-S5375 with ADOBE ENCORE CS6
I recently purchased a new laptop and installed Adobe Master Collection CS6. I purchased the laptop for video capture and editing, as well as for blu-ray authoring. Unfortunately, although the computer and software works fine for video capture and
-
Hi my iphone 6plus 128Gb,get turn off but before that sudenly the right part of display get darkness and then it's start to get warm and warmer at least 10 min,the battery used and then i restart the phone then it's start but with half darkness displ
-
after my mac is left standing over 20 to 30 minutes it drops my secured wifi and locks on to some neighbor's unsecured wifi
-
How to transfer data from NEW mac to OLD?
I want my Macbook Pro, gotten around early 2009 (runs on Leopard), to have the same things on it that my newer iMac has (runs on Snow Leopard). However, I'm running into a problem when I try to do that. A few months ago I had no problem transferring
-
Lots of false positives on outbound SPAM filtering
Starting around 5:30AM this morning a lot of our outbound e-mail began testing as positively identified SPAM. In our environment I have positively identified outbound SPAM setup to go to a quarantine. In looking at the e-mails they are legitimate e-