Screen wont turn on resume from pm-suspend

I just recently installed arch after being a long time ubuntu/linuxmint user. Suspend to ram has always worked fine with the other distros. However, after installing arch, the laptop will suspend, but when I try to resume, the screen will not come on and I have manually kill the power to the laptop. I am assuming because of the modular state of arch, I am just missing something I need to configure or install.
I have a radeon graphics card, but I am using the open source driver.
The laptop is running on a dual core amd64 architecture.
Anyone have some time to help me get resume working?
P.S. pm-suspend.log indicates the suspend was successful, and no errors were logged.
Last edited by demersus (2012-11-06 15:17:12)

Make sure that you do not have competing programmes all trying to control this kind of functionality. On your system you have at least the following: systemd; pm-utils; KDE. You may also have acpid.
I'm not saying this will solve the problem but it might enable you to diagnose it at least.
Apart from the logs/journal, you might also try booting to the CLI and seeing what happens if you suspend without KDE in the picture. (You should still make sure just one of the remaining methods is operative, of course.)
Is the screen completely blank or does it look as if the backlight is not on but there is output?
You can also try increasing the log level if you don't get enough info otherwise.

Similar Messages

IPhone 5 screen wont turn on. (Need help or info, please and thank you.)

So i got an Iphone 5, and i accedently droped it in the sink. i took it out, whipped it off, i put it in my pocket and left it alone.
the next day the screen was not working, moments later, it(Iphon5) turned off. tried turnng it back on but it wouldnt work.
so, again i left it. everything still works, its just that the screen wont turn on, i could still play music snapshot stuff,
but my screen wont tun on.
I NEED HELP.

I don't beleive this is a known problem and you should probably bring your phone to a local Genius Bar (make an appointment here) as this is likely a hardware issue (a problem with your phone realizing that you removed it from your ear).
If you're willing to tinker with it a bit, you can determine if this is a software issue by backing up your iPhone (separately ensure your photos, videos and music is backed up) and then "Restore" your phone. If the restoration solves the problem, you're dealing with a software issue. If the problem still exists, you're almost definitely dealing with a hardware issue.

Fan Control fails after resume from pm-suspend

Hi,
i recently upgraded to 2.6.37 (on a hp nx6325 laptop) and noticed the following behaviour after a resume from pm-suspend:
The fan control stops working until cpu reaches a temperature of 60°. As soon as the temperatur passes this threshold the fan starts rotating at max. speed. Below 60°, the fan is turned off immediately.
pm-suspend.log:
disabled, not active
/usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Don Feb 3 09:16:21 CET 2011: Finished.
Any ideas where to look for the problem?

I have the same problem with 2.6.37.1-1: suspend do not work.
The sceen goes blank then returns to X. The log shows the followings:
Feb 21 15:50:33 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Synchronizing SCSI cache
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Stopping disk
Feb 21 15:50:33 localhost kernel: tpm_tis 00:03: Operation Timed out
Feb 21 15:50:33 localhost kernel: legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
Feb 21 15:50:33 localhost kernel: PM: Device 00:03 failed to suspend: error -62
Feb 21 15:50:33 localhost kernel: PM: Some devices failed to suspend
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Starting disk
Feb 21 15:50:33 localhost kernel: b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
Feb 21 15:50:33 localhost kernel: ------------[ cut here ]------------
Feb 21 15:50:33 localhost kernel: WARNING: at drivers/base/power/main.c:106 device_pm_add+0xb6/0xc0()
Feb 21 15:50:33 localhost kernel: Hardware name: HP Compaq 6715b (GB835EA#AKC)
Feb 21 15:50:33 localhost kernel: Device: misc
Feb 21 15:50:33 localhost kernel: Parentless device registered during a PM transaction
Feb 21 15:50:33 localhost kernel: Modules linked in: fuse ipv6 vboxnetflt vboxdrv snd_seq_dummy snd_seq_oss snd_seq_midi_event loop snd_seq arc4 ecb radeon b43 ttm drm_kms_helper mac80211 snd_pcm_oss drm snd_mixer_oss joydev snd_hda_codec_analog ssb tpm_infineon i2c_algo_bit cfg80211 hp_wmi mmc_core sparse_keymap tg3 ppdev rfkill snd_hda_intel parport_pc libphy pcmcia snd_hda_codec snd_usb_audio snd_pcm ohci_hcd yenta_socket pcmcia_rsrc pcmcia_core firewire_ohci snd_hwdep tpm_tis snd_usbmidi_lib hp_accel lis3lv02d i2c_piix4 video tpm snd_timer firewire_core evdev ehci_hcd snd_rawmidi crc_itu_t serio_raw snd_page_alloc tpm_bios output wmi input_polldev thermal battery lp sg ac container usbcore i2c_core button fan snd_seq_device shpchp parport edac_core edac_mce_amd snd pci_hotplug psmouse soundcore k8temp cpufreq_ondemand powernow_k8 freq_table processor mperf ext4 mbcache jbd2 crc16 sd_mod sr_mod cdrom ahci libahci pata_atiixp pata_acpi libata scsi_mod
Feb 21 15:50:33 localhost kernel: Pid: 12986, comm: pm-suspend Not tainted 2.6.37-ARCH #1
Feb 21 15:50:33 localhost kernel: Call Trace:
Feb 21 15:50:33 localhost kernel: [<ffffffff81056a1a>] warn_slowpath_common+0x7a/0xb0
Feb 21 15:50:33 localhost kernel: [<ffffffff81056af1>] warn_slowpath_fmt+0x41/0x50
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8596>] device_pm_add+0xb6/0xc0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aea8e>] device_add+0x4ae/0x5c0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aebb9>] device_register+0x19/0x20
Feb 21 15:50:33 localhost kernel: [<ffffffff812aed53>] device_create_vargs+0x193/0x1b0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aed9c>] device_create+0x2c/0x30
Feb 21 15:50:33 localhost kernel: [<ffffffff813a5fc1>] ? mutex_lock+0x11/0x30
Feb 21 15:50:33 localhost kernel: [<ffffffff8129a3fa>] misc_register+0x8a/0x140
Feb 21 15:50:33 localhost kernel: [<ffffffff8129d36f>] hwrng_register+0xdf/0x170
Feb 21 15:50:33 localhost kernel: [<ffffffffa0426ab0>] b43_wireless_core_init+0xdb0/0x11a0 [b43]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa0427068>] b43_op_start+0x1c8/0x1e0 [b43]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa0477a15>] ieee80211_reconfig+0x335/0x400 [mac80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa046d8b8>] ieee80211_resume+0x28/0x70 [mac80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d8a55>] wiphy_resume+0x75/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffff812b7ebe>] legacy_resume+0x3e/0x80
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8025>] device_resume+0x125/0x130
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8192>] dpm_resume_end+0x102/0x3a0
Feb 21 15:50:33 localhost kernel: [<ffffffff81096350>] suspend_devices_and_enter+0x90/0x1f0
Feb 21 15:50:33 localhost kernel: [<ffffffff810965d0>] enter_state+0x120/0x150
Feb 21 15:50:33 localhost kernel: [<ffffffff81095b16>] state_store+0xc6/0x100
Feb 21 15:50:33 localhost kernel: [<ffffffff811f3c27>] kobj_attr_store+0x17/0x20
Feb 21 15:50:33 localhost kernel: [<ffffffff8119f37f>] sysfs_write_file+0xcf/0x150
Feb 21 15:50:33 localhost kernel: [<ffffffff81135ac6>] vfs_write+0xc6/0x190
Feb 21 15:50:33 localhost kernel: [<ffffffff81135ddc>] sys_write+0x4c/0x80
Feb 21 15:50:33 localhost kernel: [<ffffffff8100bed2>] system_call_fastpath+0x16/0x1b
Feb 21 15:50:33 localhost kernel: ---[ end trace 19e4cbd37086936d ]---
Feb 21 15:50:33 localhost kernel: PM: resume of devices complete after 1300.325 msecs
Feb 21 15:50:33 localhost kernel: PM: Finishing wakeup.
Feb 21 15:50:33 localhost kernel: Restarting tasks ... done.
Feb 21 15:50:33 localhost kernel: video LNXVIDEO:00: Restoring backlight state
And the solution on linux.kernel: http://groups.google.com/group/linux.ke … 616cfdb4a9
Revert or wait!
Or rmmod tpm_tis.
Last edited by daroczig (2011-02-21 21:55:10)

My screen wont turn on for my ipod touch. it's recognized by the computer when i plug it in and it beeps when i plug it in the wall. whats going on?

help. this screen wont turn on. its not the battery its fully charged.

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
Try a different cable.
Use a wall plug.

My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together

My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together

You have a hardware problem and you should take it into a apple store to be looked at and fixed.

Lenova Think pad makes 8 beeps and screen wont turn on

I have a black lenova thinkpad laptop and once in a while when i turn on the laptop, it makes 8 beeping noises and the screen wont turn on at all but it sounds like the laptop is on. I have tried fixing this by keeping the laptop in the fridge for a day because i think it was becaue it was over heated. Once i take it out, it works perfectly fine. But when it happens again it eally gets on my nerves and it sometimes happens at poor times when i actually NEED to use my laptop. This has happened probably over 12 times now. I have no idea how laptops work or what the different parts of them are called. So if there is a solution, please explain it in a simple manner. Thank you!

Hello and welcome,
Please tell us what model laptop you have. The Hardware Maintenance Manual for you laptop probably has a "beep code" section that may help narrow down the situation.
For example. if a T420 emits One short beep, pause, three short beeps, pause, three
more short beeps, and one short beep. It can be a memory module or the system board.
The beep codes may be common to all ThinkPads (I'm not sure...) but it would be good to look up the documentation specific to your machine.
Z.

The screen wont turn on

i have a verizon iphone 4 it doesnt turn on (LCD) but when i connect it to the wall or to itunes it works like it has no problem.... the screen wont turn on... can anyone help me plz..

Hi,
If it comes to life when plugged into the charger or via your computer and NOT on it's own, there is a good chance that the internal battery has died.
Time for a trip to Apple or if your up to it buy the parts online and do the repair yourself (no its not very hard)
Hope this helps.
Cheers!

My external lcd monitor for my mac book screen wont turn on?

my external lcd monitor for my mac book screen wont turn on, it was working fine, I came home hooked up my laptop and the screens bounced back and forth a couple time. I got an error message saying my dashboard client had crashed, screen went black on monitor. Now when I plug it in my laptop doesent even recognize my external mac lcd monitor. It still charges the battery, Any suggestions????

Hi, what still charges the battery?
Does the Laptop's internal screen still work?

IPhone 5 screen wont turn back on after making a call.

When I put my phone to my ear, the screen turns black, like it should, but once I'm done, it wont turn back on... It does the same thing with siri. I active the raise to speak option and the screen turns black when I do it. I then have to press the sleep button two times to get to my lock screen. Is this an hardware or a software problem? If it is software, can an upcoming update fix it?

I don't beleive this is a known problem and you should probably bring your phone to a local Genius Bar (make an appointment here) as this is likely a hardware issue (a problem with your phone realizing that you removed it from your ear).
If you're willing to tinker with it a bit, you can determine if this is a software issue by backing up your iPhone (separately ensure your photos, videos and music is backed up) and then "Restore" your phone. If the restoration solves the problem, you're dealing with a software issue. If the problem still exists, you're almost definitely dealing with a hardware issue.

My screen wont turn off

I got my ipod nano at xmas and its been perfectly fine until now. I always have the hold button when its turned off so it accidently doesnt turn back on. I put my ipod into the usb port and usually the itunes come up but it didnt all i got was my screen stuck as if its frozen and it still has the little lock symbol even when the button is off lock. The battery is really low and i dont know what to do.... PLEASE HELP!
Racheal
Windows XP

i've had a similar problem,had my nano since september and its been fine but it wont turn off when you hold down play/pause. no matter how long you hold it down. also, usually when you unplug the headphones it automatically changes pauses then eventually switches off, it doesnt do that either. i had a problem like this with my mark 2 ipod and just hope it doesnt go the same way as that!

Lumia 710 standby screen wont turn off

The standby screen of my nokia lumia 710 wont turn off. I powers off when i hit the standby button but when i recieve a new email/whatsapp the screen stays on for hours resulting in a battery life of max a half day. It started a week ago an I did a hard resut in order to solve the problem but it didn't help.
What can be a good solution?
Thanks in Advance,

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.

Screen wont turn on unless its under light.

my screen for my LG G2 wont turn on unless it is under light or in a very lit up room. HELP!!

Hey
I’m sorry to hear that your device screen is not turning on! I’d be happy to help! It sounds like there may be an issue with the proximity sensor. Is the device currently in a case or does it have anything on the exterior which may be blocking this sensor? Additionally, did this start after installing any new apps at all? Check if this is happening in Safe Mode by following these steps:
Press and hold the Power key.
Touch and hold Power off.
Review the 'Reboot to safe mode' screen, and then tap OK.
The device will restart and 'Safe mode' appears in the lower-left corner.
Restart the device to exit Safe Mode.
I hope this helps!
Charise

HT201412 my ipod screen wont turn on but it still lets siri talk

my ipid screen wont work but it still lets siri talk

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My screen wont turn on!

My screen is black and it wont turn on, I call it and it will vibrate but wont show whose calling. My power button is broken and I've tried everything. Help?

Hi there thedash23,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

Vision m screen wont turn

i just charged my vision:m up and when i went to take it off charge the screen was turned off, usually itll say charging, and im pretty sure it wasnt fully charged. i didnt think anything of it but when i tryed to turn it on, the light at the top (by the on button) just flashes quickly but dosent stay on. im pretty sure the light stays on while the player is on, whats happened and how can i fix it's thnx

kk cheers, im going to take it back to where i bought it from, currys, and see what they can do but if not ill call/email creative, im going away for a week on sunday so when im back ill try and remember to reply thnx

Screen wont turn on resume from pm-suspend

Similar Messages

Maybe you are looking for