Screenshot in ICS question

Ok this is not a how do I take a screen shot question, I was just wondering is there a way to get rid of the sound when I take a screen shot? (without putting my phone on silent mode)
I remember on ginger bread, in normal mode (not silent mode), it was either no sound, or it was not this LOUD, it's really loud when I take a screen shot.

Not that I'm aware of, no.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Screenshot in ICS

Hi how can i take screenshot photo using ICS on SE Ray...Why is missing in power menu?
Thanks

To perform a screen shot using ICS simply do the following,
Hold down the power key and Volume Down key at the same time.
Hope this helps.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Who can help w/ ICS questions?

I got ICS last night so i woke up to a phone that neither myself nor tech support knows much about. Still evaluating the damage but biggest problem so far is that if i followed somebody/something on Twitter they are now inter-mingled with my actual Contacts. Not sure why or if there's any ramifications to deleting them as a "Person" or "Contact". Still determining what else is messed up so I know I'll have more questions; where can we go to get answers to these type of questions? TIA

You should be able to go into your Twitter app and go to settings. You should find something similar to Sync Contacts with a few options. Choose DO NOT sync Contacts. That should remove them. If it does not go to your accounts and Delete your Twitter Account from the phone itself (you will NOT lose any Twitter info as that is stored on Twitters Servers). Then go back into Twitter (it will have you sign in again) and go back to settings and make sure Sync Contacts is still set to DO NOT. That should remove these contacts from your phone contacts list.
Also you can open the People App and bring up the menu. Choose Contacts to display. Make sure your only contacts displaying are Phone, Your Gmail and Possibly Verizon Wireless (if you use Backup Assistant).

ICS Question

I receive my internet connection free from my apartment complex from their Linksys WRT54G Wireless router. I receive it on my Linksys WUSB54G external USB Wireless Adapter. I've got this connected to a desktop computer in an upstairs room.
The problem is that my laptop usually doesn't get a good signal when downstairs. What I did was bought my own Linksys WRT54G Wireless Router with the intention of using it as a "repeater" and share the connection on my own closed wireless network.
Is it possible to do this? I can get the WLAN set up so that I can see it as an available wireless network, but nothing can connect to it. I think that I'm having an IP conflict with my landlord's WRT54G Router.
If it's possible, how should I set up this system to get it to work the way I want it to?
Thank you for any help you may provide!
CC

O.K. That's another option:
* use the computer with the USB wireless as gateway. Please read the following steps first. (in particular be aware that you have to make the change no. 2 & 3 on the same tab and save the settings after making both changes. Do no save the settings directly after no.2).
1. disconnect the wireless connection for the moment and connect a numbered LAN port of the WRT with the ethernet port of your computer.
2. configure your WRT for a LAN IP address 192.168.0.2, subnet mask 255.255.255.0. (ignore the WAN/internet connection settings). It is a good idea to write down that IP address and subnet mask on a post-it and stick it to the router in case you forget it over time...
AND on the same tab:
3. disable the DHCP server on the WRT.
4. Now save the settings in the router. You get disconnected from the router and won't be able to get access right now. Don't worry...
5. enable ICS on the computer (internet connection sharing) on the computer using the wizard. You have to select which connection is the internet connection (the wireless) and which is the LAN connection (your ethernet Local Area Connection).
6. Open a command prompt window. Now enter "ipconfig /all". Verify that you have the IP address 192.168.0.1, subnet mask 255.255.255.0 on the Local Area Connection.
7. In the same command prompt window enter "ping 192.168.0.2" which should work. You can reconnect to your router through http://192.168.0.2/
8. Power up the wireless connection and verify that you have an internet connection on the computer.
9. Now connect to http://192.168.0.2/ Go to the Administration tab, subtab "Diagnostics". Use the ping function to ping an address in the internet. E.g. try www.google.com which is 66.249.89.99. The host name won't work. You must use the IP address. Verify that it works. You can also use the traceroute function on the router to the same IP address. It should work, too.
9. Try to ping an address in the internet from the internet, e.g. try ping www.google.com. If the host name does not work try the IP address which is 66.249.89.99. If that also does not work try the pings from a computer (not the gateway) wired to the router. Please post the exact errors you get if the pings don't work.
10. Now you can connect your other wireless computer to your router for internet.
Remember:
* you only have internet in your private LAN as long as the gateway computer is turned on and is connected to your building's internet connection.
* your WLAN is connected to the LAN side of the computer. This opens up your computer to some extent to anyone who is able to connect to your wireless router. Therefore you have to protect your router and your WLAN. On the wireless and wireless security tab, you have to change the SSID/network name from "linksys" to something unique. You should also change the channel to one that is not used in your building. Enable WPA2 Personal or WPA Personal wireless security and pick a strong pre-shared key. Remember, if you connect your router through an ICS computer this is a MUST otherwise you risk that people connect to your wireless router and get access to your computer.Message Edited by gv on 06-07-200703:40 PM

Multiple quiz questions

Does anyone know a quick way of putting more than one quiz
question on a single slide?

Hi Ailse,
Your idea of using masks is a good one. You're thinking like
a true Captivate expert!
You could also try taking a screenshot of the questions on
each slide, cropping them to show only the interesting parts, then
inserting those images on your Question slides so it looks like the
other questions are all present on a single slide.
Only the actual Captivate question would be "live" on a given
slide and your images wouldn't reflect what the user answered on
previous slides, but it should be fairly convincing, especially
given the circumstances.
If you want to go all out, temporarily change the font color
of each question to gray before taking your screenshot, and the
questions will appear "disabled" when you import them into
Captivate. This would give the user a reason why the "non-live"
questions are not working on a given slide.
Regards,
John

Inserting a question into a blank slide

I need to add an explanation slide at the beginning of my quiz, I need to give the delagates an example of what is required and would like to add a question to this slide.
Can anyone help me out.
Thanks
Jim

Hi Jimbotot,
sounds like you have a slide which you like so far, but you want to add a sample fill in the blanks.
You will not be able to add a real fill in the blanks question slide, as you would need to create this first and add the content later.
But you could choose a Text_Entry_Box and build your Text around this.
That could fake the real question and give the users a good idea of what is going on.
The other possibility would be to screenshot the real question and add in the screen.
Is this what you are talking about?
Best
TD

My desktop (a question)

Hi guys,
I am not posting this screen shot because I think my desktop is good or not its just I found a theme I really like however it has an ubuntu symbol in the top left gnome panel. Ive searched on google for this somewhat but it seems it all applies to ubuntu and everything I have copied or move around hasn't worked.
Also I do not know if this is the section for this, sense it is both a screenshot and a question, half of me is saying this is entirely the wrong section and if it is I apologize.
Thanks.
edit: I messed up on positioning.
Last edited by aleceiffel (2009-04-20 20:06:35)

You will need to change the logo for the file called distributor-logo.png (i think - its pretty close to that) and change the icon to whatever you want. It should be under your theme folder in places.
The other way to do it would be:
1) first off you have to have a "main menu" utility on your panel. just right click and click add to panel. make sure its a "main menu" and not a "menu bar"
2) open a terminal
3) type $gconf-editor
4) navigate apps > panel > objects
5) find whichever object is the "menu-object" (if you have a lot on your panel it might take a little bit of sifting)
6) check "use_custom_icon"
7) under "custom_icon" add the path to the image you want to use.
Last edited by Inxsible (2009-04-20 20:14:56)

Discussion Forum does not display the items in Answered question ,Unanswered question views.

Hi All,
Discussion Forum does not display the items in Answered question ,Unanswered question views. Please find the below screen
what is the difference between Answered and unanswered view?
I have marked the discussion as question .
have replied for the question those discussion are visible in Unanswered view and the answered view is showings as no item to show.
Below screenshot is answered questions view.
Can you please help on this .
Thanks in advance ,
Sunitha

The discussion in which at least one of the replies is marked as "Best Reply" will show in the "Answered Questions" section.
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field

Pre-Test in Captivate with rating scale questions

What I want to do with Captivate:
- First an Pre-Test with 35 Questions the learner has to answer. I have to use a scale from 1 to 6.
- These questions belong to 13 groups of questions
- The Results of the questions are to be summed up in grouping variables
- The Score in the variables are responsible, which of the eLearning-Moduls should be highligthed in the TOC
- At last the TOC should be displayed
- I want to use for every of the following moduls an own project (to reduce the size of every project)
- I have to import this all in the LMS ILIAS (Scorm 1.2 and Scorm 2004)
- the learner should be able to interrupt the application at any time and resume again
I have seen the Thread "how to make a Pre Test in Captivate 4" and I work out the script-example inside the Captivate-Help and the ebook from Rick Stone.
What is the recommendation
1. to realize the slides with the questions (they should be self-created, but how to do?)
2. to realize the code in the advanced actions
3. to realize the working-together of the project with pre-test and toc and all the following modules
Perhaps, someone has an example for me.
Best regards
Winfried

Hello Winfried,
Spent a couple of hours yesterday to work out a proposition. Must confess that I realized it in CP5, mostly to save some time with the Advanced Actions but it could be done in CP4 too. Beware: I did not bother a lot about the layout, graphics, just tried to find a workflow that will achieve your goal only using Captivate (no widgets, no to be written Flash-SWF's) within a reasonable amount of time. There is quite a lot of copy/paste possible, repetitive tasks that are a bit monotonous, sorry about it, and some discipline is necessary.
To start with: I made some choices to simplfy.
You showed me a screenshot with buttons to click on (little bit like the Likert Question slide) but I have preferred to have the user introduce a number from 1 to 6, which means you'll need a legend to explain on each page. If you really want the six buttons later on, you should look for a widget or a Flash SWF that returns a value = clicked button (1 to 6). To achieve this in Cp alone would be a tremendous work. You should have to take into account that a user can change his mind and click on another button... With my system (typing a number) this is no issue.
Choose to put 13 questions on each slide, one for each question group. This makes it possible to prepare one slide and copy it twice (to have 39 possible questions). There will have to be done some minor changes on the copies, but most of the work can be taken over. If you prefer to have less questions/slide that would be also possible, but then you'll have different copies (p.e. a slide with 7 and a slide with 6 questions).
Choose to have a submit button for each question that will trigger an advanced action. Mostly need this to check after completion of a slide if all questions have been answered. If you do not like those many 'Submit' buttons, in CP5 this could be easily replaced, in CP4 it will take some more working time.
First screenshot of a question slide:
In this screenshot you'll see 13 questions with 13 Text Entry Boxes. For the TEB I provided the Submit button and only the Failure Caption (red one: put all of them in the same spot). The value entered in the TEB is stored in a user variable, so I needed 13 user variables for this slide, labeled them:
v_1 v_2 .... v_13.
Same user variables will be used on the next question slide (if you have less questions/slide you'll need less user vars of this kind).
TEB is validated for the values 1 up till 6. If another number is entered the Failure Caption shows up.
The blue Text Captino (Please, answer all...) is initially hidden when entering the slide (action for On Enter slide).
Each Submit button triggers an Advanced action (labeled first AddGroup1) on success (slightly different, you'll need 13 of then, but copy can limit the work), with variables:
created one variable 'v_counter' to store the number of correct answers on the slide, will be used to check if all questions have been answered; this counter is set to the value 0 on entering the slide
created 13 group variables v_G1 v_G2.... v_G13 to store the total score per group
labeled actions like AddGroup1:
increments counter with 1
adds value stored in v_1 to the variable v_G1
because playhead shouldn't move on the Timeline, set the system var rdcmndGotoFrame = rdInfoCurrentFrame
in the 12 copies of this action, only second action has to be changed
Next button allows the user to go to the next slide, but triggers another advanced action, that I labeled TestCompleteSlide1. You'll need a slightly different action for each Question slide, but again copy does most of the work. This action:
checks if the variable counter is different from 13
if it is different:
the blue Text Caption is showed to insist on answering all the questions (this is what had to be changed on copy, because each text caption has its proper ID, blue Text Caption on second question slide has a different ID from that on first)
rdcmndGotoFrame = rdInfoCurrentFrame - 2 to put back the playhead
if it is 13, jump to next slide
Last slide is TOC: The modules to be taken will be marked with a green circle in this screenshot and get a click box over the name and the green circle. Those not to be taken will be marked with a red triangle and not have a click box. You'll have to configure the click boxes to open the proper module. Initially all click boxes are there but invisible. Same for all green circles and red triangles. They will get visible based on checking the value of the grouping variables v_G1 v_G2.... v_G13. Just a screenshot here, if you confirm that you want to try my proposition, will explain further. This was rather easy in CP5, will not be in CP4, that is why I didn't yet work it out in CP4:
Lilybiri

Grey box over multiple choice options in quiz (Captivate 5.5)

I created several quiz slides - all multiple choice. When the mouse is moved over the answer options a grey box highlights the radio button and text of the option. I'd rather not have this grey box displayed. Any ideas on how I turn off this "feature"?

Interesting. Can you upload screenshots of a question with the grey rollover and a question that does not have it, each with a mouse cursor over an answer item, so that we can see?
Is this a project that has been upgraded from an older version of Captivate or was it built from scratch in Captivate 5.5?

HP Laptop doesn't recognize Hard Drive

Hi,
I have a HP 620 (Pentium D 2,3GHz 1GB Ram) and it doesn't recognize the Hard Drive. The battery doesn't seem to work too.
If i try to install Windows, it says that there are no hard drives found. The diagnostic test in the BIOS says the same.
The DVD player is also lousy as **bleep**.
Do you guys have some tips about cause of this problem.
System information screenshot below
This question was solved.
View Solution.

Have you entered the UEFI PC Diagnostics to see if the component tests show the hard disk?
Had you considered removing the original hard disk, then reseating it and trying again to see if it is recognized as beong installed?
You can also put another hard disk in its place to see if it is recognized.
Is your notebook still in warranty? warranty status
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

PI 7.1 Installation Error

Hi
I am installing PI 7.1 EHP1 and ran into a error with sapinst. Here is my system config
5GB Ram / 2 GHZ AMD Processor / VMWARE / Windows 2008 64bit / Oracle 10.2
Error
The DB Home folder D:\oracle\XXX\102 has not the correct DB Server version 102. Select a different DB Home folder or install the correct database server software.
The correct media(#51036975) was downloaded and installed for the database.
Let me know if the sapinst.log or other file needs to pasted in here. Is there a way by which I could attach a screenshot in this question?
Any ideas?
thanks
Ravi

Hi Ravi ,
I am not sure but have you installaed DB s/w before staring the installation.Its necessary to install DB s/w first to install SAP on oracle in windows environment.
Please install DB s/w & then start the SAP isntallation.
Thanks..
Mohit

Using content from PSE's "Content Panel" in Photoshop CS5

I own a copy of both Photoshop CS5 and Photoshop Elements. Overall I use PS for everything though I am not a graphic designer and some of the content in PSE is very handy. Mainly the content in the "Content Panel" (see screenshot below) My question is this, is there a way to access that content from within Photoshop CS5. I looked through the Program Files and could not find any of the content. I could go through and save each individual file as a separate PSD and use Bridge to browse those files. Is there a specific file I am missing?
Note: I only looking for the Background, Frames, and Graphics. The rest I can replicate in PS.
Screenshot from Adobe KB

Look in the Program Data files, something like:
(on windows the Program Data files are hidden files so you'll have to enable Show Hidden, files, folders or drives in the folder options)
C:\ProgramData\Adobe\Photoshop Elements\10.0\Photo Creations
Substitute the 10.0 above for your version of elements.

Using the JavaScript Debugger with Adobe Reader X (10.1.0) ?

Hello all,
Quite new to JavaScript in Acrobat I am trying to write a 4 page Form with CenoPDF and check/debug it with Adobe Reader X (10.1.0) on a Windows 7 (32bit, usually no Admin rights) PC. I realise Acrobat Professional would be a more appropriate tool, but for the moment I hope to get away with Reader.
Following this instruction I managed to get the Javascript Debugger running with Reader X, but there is a serious issue:
The Debugger window often crashes - and with it the whole Reader - after clicking around on a few controls (triangles in the Scripts window or others). First the font changes, then letters disappear, controls disappear and soon after the whole user interface freezes (see the two screenshots below).
Questions:
Do others also have problems with crashing Debuggers?
Is there a known solution or work around to this problem?
Many thanks for your help or some info, BobDuke

I am having the same problem. Win 7 or Win XP doesn't matter the problems seems to be with Adobe 10.1.0. Works ok with Word, but not adobe reader. Doesn't un-collate if the box is checked. Tried to unchecked then recheck. Use to work but now it doesn't.

I get every time after rendering four black bars around the video, I would like to fix this because it is not really professional.

sorry for my poor english, I have a problem with adobe premiere elements 12 when I render I get a video black bars on all sides of the screen, which makes the video smaller. How do I fix this?

Bram Bakker
Are you OK with translating the language English to Dutch? Have you been using the Translate button at the bottom right of the posts to translate what is written in English to Nederlands (Dutch)? Is the major problem that you cannot find the locations that I point to in Premiere Elements?
1. What are the properties of the video that you are putting on the Timeline? The quick way to find this
information is knowing brand/model/settings of the camera that recorded the video on the Timeline.
From this question I am trying to find out what the properties are for your video - video compression, audio compression, frame size, interlaced or progressive, file extension, pixel aspect ratio. I was hoping that you could tell me the brand/model/settings of the camera recording the video so that I could find the information myself.
2. What are you setting (manually) or the project (automatically) as the project preset that will match
the properties of the video that you are importing? If you do not know, then tell us what you see under
Edit Menu/Project Settings/General and the readouts for Editing Mode, Timebase, Frame Size, and Pixel
Aspect Ratio, even if the fields look grayed out.
Besides knowing the properties of your video, it is just as important to know the project settings. Are you setting them yourself or just dragging the video to the Timeline and letting the project set the project preset automatically? If you are doing nothing, then the answer is that the project is doing the setting automatically.
Either way, you can find out what is being set by going to Edit Menu/Project Settings/General and looking for the reading that you see in the following screenshot.
3. The next big question is "What do you mean by rendering?"
Do you see these black borders after you render the Timeline content in the Edit area to get the best
possible preview of what you are seeing in the Edit area monitor?
or
Do you see these black borders after you go to Publish+Share/ and export the Timeline video?
If your "rendering" refers to the export of the Timeline, please tell us Publish+Share/and then what?
This question 3 should not need a screenshot. The question is where are you seeing the black border in your video.
a. When you are in the Edit Area of the program and you press the Enter key of the computer main keyboard or the Render
button above the Timeline.
or
b. After you have exported your Timeline using Publish+Share/ and one of the export paths.
Please see if any of the above helps. If it does not, then let us try this. In Dutch if you want, describe in your own words
what you are doing in much more detail and post screenshots of the areas involved on your Premiere Elements 12.
Then I will deal with interpreting what you wrote.
We want you to succeed. So whatever way works, that is the way to go.
The answers are in the details.
Thank you.
ATR

Screenshot in ICS question

Similar Messages

Maybe you are looking for