Screwy display with a User setting
The display setting are wonky for one of my User login profiles.
The display is high contrast, grainy, and type is blurry.
When I log in as a different user, all is fixed and display is perfect.
If I create a new user, display is still good, however, some permissions, and (Quark XPress) software plug-ins will not work.
My question is 2-fold. What could possible be screwing up the display in one of the User profiles? Is there a way to return it to "default" so it displays normally?
Or 2nd option, is there a way to create a new user, but allowing access to all the software plugins that another profile has?
Thank you for your help. This is really frustrating me...I'm lost.
Check the position of the "Enhance contrast" slider in the "Seeing" tab of "Universal Access" system preference.
Similar Messages
-
RA Simulation on Profiles with "Include Users" Option
Hi ,
We have SAP RAR 5.3 SP8 P1.
When running the Risk Analysis simulation for profiles/roles, we are presented with an option to set Yes/No for "Include Users" .
Can somebody explain how this flag setting affects the simulation and what we can expect in the report?
With "Include Users" set to Yes, are we expected to see the users with the combination / one of the profiles???.
We are trying to simulate permission level risk analysis for profiles. So the simulation Values are set to check another profile with:
Exclude Values - No
Risk From Simulation Only - No
Include Users - Yes
Include Composite Roles - No
Once we set "Include Users" to Yes, we can only run the simulation as a background job. But unable to see any user info in the results. Hope somebody can explain what the report is expected to display.
Thanks,
AnilI am not logged on, but from memory this was an option to include "Reference Users" in the analysis. This means, authorizations (not profiles or roles!) are assigned indirectly via another user whos access I can inherit.
If it makes no difference and is refering to the reference user concept, then obviously you do not have any reference users...
> We are trying to simulate permission level risk analysis for profiles.
Are you sure about this? You are building manual profiles?
Cheers,
Julius -
How to set up a desktop with numerous users
New to the Mac...replacing windows desktop
Home desktop: 2 adults 2 kids
the adults each have (multiple separate) email accounts...the kids have email but not as important...
mostly browsing; email; social networks...
shared apps would be MS Office...
not overly privacy concerned...any user can see the computers files...i suppose everyone should get some email account privacy...
1. I supposes creating 4 users is the most rational...
i assume each user could have a separate email setup...that would only be visible when they are logged in to their account...
I assume each user could have a separate documents folder...that would be the default when they are logged in (but when logged in to to other accounts it is probably visible)
I assume everyone could share the MS office apps...
This seems rational...a sandbox for everyone...
2. are there alternatives?
the problem with multiple users is that 3/4 users are not computer oriented...they dont have the mentality to log in and log out...they tend to just sit down and start surfing...writing a document...
can you have multiple separate email "silos" in one user logon? a different icon to go to different users emails...
I want something rationale but simple...
p.s. just an observation..as one with some gray hairs...
despite a pretty expensive mac desktop on order...for home use...desktops are kind of dying...
its all the phone and the tablet...I (and my family) simply do not sit in front of the family desktop anymore...for example, i used to pore over quicken...now most of the finanial stuff is on the financial institutions website etc...any i can look at my finances (for example) better on their website than i could with my home software...and i do not want to sit on my couch or kitchen table and not at the desk in the "office"...
but we still need it for school projects...somethings where we need a big screen...
but i want to set it up simple...
thxI'd still set up four user accounts. You don't have to set a password for them, if you don't want to, which eases login. Everyone gets their own space to "decorate" as they wish.
It is not simple, or pleasant, to keep everyone's email in one account and try to deal with it. Mail doesn't have a "profile" system as that is taken care of by the user account. There is no way to switch between email accounts if they are all in one user account. You'd end up removing those gray hairs, violently.
Everybody has access to all the programs on the Mac. However, you could install one inside a user account, then only that user would be able to use it. Not common, but possible.
With Fast User Switching, they can select their name from the menu bar to go to their account, if it is not sitting on the Login screen.
There is also a Shared folder inside the /Users folder where you can put documents that everyone needs access to, if you need it. -
Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared library?
Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.
-
I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on my iphone
Quote: "You cannot merge two or more Apple IDs into a single one. You can, however, use one Apple ID for iCloud services and another Apple ID for store purchases (including iTunes in the Cloud and iTunes Match). See “Using one Apple ID for iCloud and a different Apple ID for Store Purchases” above for details." See also Apple ID & iCloud FAQ: http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US
You can set up your iCloud account on your iOS device under: "Settings > iCloud" and a other account for store purchases under "Settings > iTunes & App Stores". Unfortunately merging accounts is not possible but you could transfer all of your music manually via iTunes from your Mac or PC. -
So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart. -
hi friends
i am trying to set peoples or groups field in sharepoint list form with current user login name
here my code
<script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
<script type="text/javascript">
$(document).ready(function NewItemView () {
var currentUser;
if (SP.ClientContext != null) {
SP.SOD.executeOrDelayUntilScriptLoaded(getCurrentUser, 'SP.js');
else {
SP.SOD.executeFunc('sp.js', null, getCurrentUser);
function getCurrentUser() {
var context = new SP.ClientContext.get_current();
var web = context.get_web();
currentUser = web.get_currentUser();
context.load(currentUser);
context.executeQueryAsync(onSuccessMethod, onRequestFail);
function onSuccessMethod(sender, args) {
var account = currentUser.get_loginName();
var accountEmail = currentUser.get_email();
var currentUserAccount = account.substring(account.indexOf("|") + 1);
SetAndResolvePeoplePicker("requester",account);
// This function runs if the executeQueryAsync call fails.
function onRequestFail(sender, args) {
alert('request failed' + args.get_message() + '\n' + args.get_stackTrace());
function SetAndResolvePeoplePicker(fieldName, userAccountName) {
var controlName = fieldName;
var peoplePickerDiv = $("[id$='ClientPeoplePicker'][title='" + controlName + "']");
var peoplePickerEditor = peoplePickerDiv.find("[title='" + controlName + "']");
var spPeoplePicker = SPClientPeoplePicker.SPClientPeoplePickerDict[peoplePickerDiv[0].id];
peoplePickerEditor.val(userAccountName);
spPeoplePicker.AddUnresolvedUserFromEditor(true);
</script>
but it is not working
please help meHi,
According to your post, my understanding is that you wanted to set "peoples or groups" field with current user "login name" in SharePoint list form using JavaScript.
To set "peoples or groups" field with current user "login name”, you can use the below code:
<script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
<script type="text/javascript">
function SetPickerValue(pickerid, key, dispval) {
var xml = '<Entities Append="False" Error="" Separator=";" MaxHeight="3">';
xml = xml + PreparePickerEntityXml(key, dispval);
xml = xml + '</Entities>';
EntityEditorCallback(xml, pickerid, true);
function PreparePickerEntityXml(key, dispval) {
return '<Entity Key="' + key + '" DisplayText="' + dispval + '" IsResolved="True" Description="' + key + '"><MultipleMatches /></Entity>';
function GetCurrentUserAndInsertIntoUserField() {
var context = new SP.ClientContext.get_current();
var web = context.get_web();
this._currentUser = web.get_currentUser();
context.load(this._currentUser);
context.executeQueryAsync(Function.createDelegate(this, this.onSuccess),
Function.createDelegate(this, this.onFailure));
function onSuccess(sender, args) {
SetPickerValue('ctl00_m_g_99f3303a_dffa_4436_8bfa_3511d9ffddc0_ctl00_ctl05_ctl01_ctl00_ctl00_ctl04_ctl00_ctl00_UserField', this._currentUser.get_loginName(),
this._currentUser.get_title());
function onFaiure(sender, args) {
alert(args.get_message() + ' ' + args.get_stackTrace());
ExecuteOrDelayUntilScriptLoaded(GetCurrentUserAndInsertIntoUserField, "sp.js");
</script>
More information:
http://alexeybbb.blogspot.com/2012/10/sharepoint-set-peoplepicker-via-js.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
How to set number of Rows of a table to be displayed based on user action?
Hi Experts,
I am getting data into the table. But only 5 records are displayed default. I want it to be a user selection.
If user wishes to see 10 records, then first 10 records should get displayed. If user selects 'n' records then 'n' records should get displayed..
How to achieve this?
Regards,
Yugesh A.hi Yugesh ,
1 create a input field UI
2 bind its value property to a attribute
3 suppose ca_check attribute ( type string ) under node cn_check is binded
read this in ur doinit of the view
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
DATA ls_cn_check TYPE wd_this->element_cn_check.
DATA lv_ca_check LIKE ls_cn_check-ca_check.
* navigate from <CONTEXT> to <CN_CHECK> via lead selection
lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
* get element via lead selection
lo_el_cn_check = lo_nd_cn_check->get_element( ).
* get single attribute
lo_el_cn_check->get_attribute(
EXPORTING
name = `CA_CHECK`
IMPORTING
value = lv_ca_check ).
4 nw for ur table , make a another context attribute of type either string or I , say attr1
bind its visiblerowcount property of table to attr1
5 make a attribute in ATTRIBUTES tab of type string , say attribute
set its value to lv_ca_check in doinit itself
wd_this->attribute = lv_ca_Check
6 nw in the method , where u need to validate how m,any rows user enter or doinit itself , set attr1 to the value of that attribute created under ATTRIBUTES tab ( named attribute)
DATA : lv_count type string .
lv_count = wd_this->attribute
7 nw its very simple , set attr1 to lv_count , as it contains the count of the number which has entered in the input field
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
DATA ls_cn_check TYPE wd_this->element_cn_check.
DATA attr1 LIKE ls_cn_check-ca_check.
* navigate from <CONTEXT> to <CN_CHECK> via lead selection
lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
* get element via lead selection
lo_el_cn_check = lo_nd_cn_check->get_element( ).
* set single attribute
lo_el_cn_check->set_attribute(
EXPORTING
name = `attr1`
value = lv_count ).
I hope it shud help
proceed like these , u wud be able to achieve the desired functionality
regards,
amit
Edited by: amit saini on Oct 20, 2009 1:12 PM -
Hi,
i have the same problem?
Trying to log in with my user id and password at iocbc but was not able to access.
Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting
Anyone can advise?You need to install Java for your Mac OS version, and/or make sure it's enabled in the Java Preferences application and your browser's preferences.
-
Is it possible to set primary and secondary display with 2 graphics cards?
I have an Early 2008 Mac Pro with two graphics cards and four monitors installed. Does anyone know how the computer (or more specifically Keynote) determines which is the primary display and which is the secondary?
Also is there any way to change the scheme?
What I am trying to do is switch the primary and secondary from the two monitors in my office to the monitor at the podium (would like it to become primary) and a vga projector (would like it to become secondary)
I bought the second graphics card so I wouldn't have to switch the cables back and forth three times a week. All the monitors work fine, it's just a matter of determining or changing primary/secondary
Thanks in advanceThanks Malcolm
I got that far – The keynote manual says that the display with the menu bar is the primary display – that works out fine. The problem is that the manual says that the display without the menu bar is the secondary (or alternate). But there are three displays without the menu bar.
What I would like to find out is: is there a way to choose the display without the menu bar to be the alternate?
When I try various combinations, there seems to be no rhyme or reason as to which display is the alternate.
Thanks again for your response! -
Hi All
the past few months, I have been working with permission issues related to SharePoint 2013 site permission settings using People Pickers to list, search, display users to assign or check permission.
Our environment include multiple domains and few forests. Our SharePoint farm is installed on one domain but the good thing is our AD structure are configured to have all other domains and forests with 2 ways trusts with this domain so domain
users are authenticated and can access SharePoint just fine. Also SharePoint use default claim authentication.
The problem is People Picker is not display all domains user accounts when site owners need to assign permission. So to resolve the problem, I had provisioned
SA - User profile service and Import AD domain user accounts (one way) into Sharepoint.
I configured stsadm.exe -o setproperty -pn peoplepicker-searchadforests -pv
for all domains and forests (eventhough, as mentioned we do have 2 ways trust)
and sometime tried different query (user last name, domain\logonname, email address) if one is not showing.
With all that added, People Pickers seem to find and display user account for all domains now.
My question now is do UPS and all AD domains users need to be imported into SharePoint and STSadm configuration are required in order to have all domains user accounts to display in People Pickers so the site owners can
find them and assign permission when needed?
Please share your advices, comments as they are really valuable to me.
Thanks
SwanlUPS and people pickers are virtually unrelated. The only connection between them is to do with caching and updating user names and emails if they change over time, or in other words not relevant to your situation.
To answer your question directly; Nope, you do not need to set up synchronisation connections to a domain to be able to pick up a person in a people picker. As you've seen you may need to run some STSADM commands to make sure they are checking the right
places. -
Share itunes with other users, windows 8
I have just bought a new PC running windows 8. For each member of my family I have set up individual user accounts. I have then installed iTunes and attempted to follow the instructions located at iTunes: How to share music between different user accounts on a single computer - Apple Support to ensure that we can all access my centrally stored iTunes media/libraries. I have followed the instructions to the letter but it does NOT WORK on Windows 8. It may have worked on other versions, but not windows 8. Please, do not respond with the above link - it's already driven me crazy that this is the only result google turns up.
In iTunes, I have used 'edit preferences' to select the public music - 'iTunes media' folder on all accounts, and keep checking the actual public folder (C - Users - Public - Public Music - ITunes - ITunes Media) to make sure all the data is there. Indeed it is there. But for each other user, iTunes won't display any of the songs in my library, or any of the playlists.
I have even tried holding shift, opening iTunes and then selecting the central library. This just results in the music all being displayed, but iTunes displaying the message that it can't find any of the songs.(I have over 30,000...).
I have deleted and reinstalled iTunes several times, and have deleted and reinstalled the iTunes data - music. libraries etc (currently backed up on an external HDD) several times. I can get iTunes to work on my account only (administrator) - but whenever I try to set up other users to access the public content, iTunes won't cooperate.
As far as I can tell, with Windows 8, there is NO WAY TO SHARE YOUR ITUNES LIBRARIES WITH OTHER USER ACCOUNTS. I have read all the previous threads on this topic, have googled everything, and have looked on youtube
Apple - this not good enough.Was it these directions?
http://support.apple.com/kb/HT1203
Did you read the line at the bottom?
+When another user of the computer has imported new music from CD, repeat steps 6 through 8 to add the music to your library+ .
You need to drag the public folder over into those user's itunes window.
Alternatively, itunes menu > file > add folder to library
When you download or rip new CDs, each user has to add it manually to their library list.
Or use something like itunes folder watch.
When you changed the other users itunes preferences, that will affect FUTURE additions. Now you are in the future and they need to add those songs to their itunes database list.
With itunes 9 you might have success putting new music in this *Automatically Add to itunes* folder
http://support.apple.com/kb/HT3832
But I haven't tried it.
Message was edited by: Katrina S. -
How to enable user sets from tools in sales order
Hi,
How to enable user sets from tools in sales order..it is greyed out..
and is there anyway we can do to add shipsets from other place?
ThanksHi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri -
ORA-04062 error when running forms with different users
ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ; -
Displaying multiple asian character sets?
Hi all,
Just wondering is there anyway to display multiple asian keysets in a java application?
Right now I can set the locale to say Chinese with the command line property:
-Duser.language=zh
I could do the same with Japanese or Korean. But I was wondering is there anyway to display all these character sets in the same program? Would I have to set the JTextFields individually to the relevant fonts so i can see the characters? E.g. if the user wants to input Chinese, all JTextFields are set to Simsun. Same for other character sets?
thanks,
JHi Justin,
As for myself, I used Robot class on Win Xp to switch between input languages in a form (French/Japanese). That works well but requires that you map manually each language to a key combination a Robot can emule.
I hope that could be useful,
Best regards,
Lionel Badiou
CodeFutures -
Java Code Generation
http://www.codefutures.com
Maybe you are looking for
-
I receive error 1311 when trying to install Acrobat 9 Standard
I am having a similar problem. I purchased Acrobat 9 standard online. installed on laptop and desktop. Worked fine for a year. Then I tried the 9 Pro trial on my desktop, and decided I didn't want or need it, I declined it. Ever since then, my Acroba
-
Why do files that I have organized into folders not stay in their folders after closing and reopening iTunes? And Why does the renaming get undone? I do this in iTunes Media/ Music.
-
Add new Column to existing Primary Key
Hi, I have a Primary key consisting of 6 columns. Now i want to add new 7th column to that existing key. Do i need to drop the existing primary key and then recreate agian with 7th field or is there any other way? Regards, Jayesh
-
Skip count does not increase when song is skipped on ipod
First, has anyone been able to see a skip added after syncing, since 4.2 came out? Second, is anyone familiar with what might have changed? Is there a fix I can't find? Thanks in advance
-
Has Pacman3 dropped support for the NoUpgrade Lines in pacman.conf?
I just upgraded to Pacman 3. When I upgraded I quickly saw some output on my sceen saying it was doing a one time "reset" and I believe it said I could delete the NoUpgrade lines in pacman.conf. I noticed that pacman.conf.pacnew does not have any No