Script error during install

On installing Flash Player (n.n.n.179) on Windows XP, I got the following error twice during the install:
The install did actually finish, but I had different version numbers for the ActiveX and the browser plugin versions. I uninstalled both of the Flash Player versions, and tried to re-install it. However, the script error comes up again, even when cleanly installing it (and it didn't re-install the ActiveX version at all). I'm wondering if it properly installed the plugin version, and I know it didn't install the ActiveX version - I looked in Control Panel to verify this. What's going on, and how do I fix it?

I don't know, I have never seen this error. Try the offline installer(s):
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Similar Messages

Bootstrap.js script error during eval() "Error initializing JDF library"

bootstrap.js script error during eval(). Everytime I open Adobe Acrobat 6.0 I recieve this error message once it loads up. I also recieve another error messeage while it is in the process of loading "There was an error while loading the plug-in "SaveAsXML.api.' This file was not found. I am wondering if this is why I cannot convert a file to PDF from word when I go to convert from file from adobe acrobat 6.0. It is vital to my business that I convert these files from Word. Even when I try to go to Adobe Distiller the error message "Error initializing JDF library" pops up and will not allow me to convert my file to PDF
Thank you

Hello,
I solved the problem (even if I really don't know how) :-/
What I did :
1. remove all the environnement variables for ORACLE : ORASID, ORACLE_SID, ORAHOME, ORACLE_HOME, ORACLE_BASE...
(I don't know why I have so many variables...)
2. I remove any varible of LANG (NLS_LANG, ORA_LANG...)
3. I checked the rpm (it seems that some of the library where missing, for example libXtst.so.6)
By the way, I installed the patch 6078836. Unzip the patch, it will create the library libdb.so.2. Move this file to /usr/lib
4. I uninstall first the agent and the oms, then the database.
5. I reinstalled everything and run the ConfigureGC.pl script. I had to go through the bug 7483221 (the script failed twice because of invalid login/password, ORA-01017). The procedure is described on several sites, I used this one :
[http://www.idevelopment.info/data/Oracle/DBA_tips/Enterprise_Manager/OEM_10.shtml]
I hope it will help you to complete the installation.
Regards

Integrity constraint error during install

We have installed htmldb on zlinux from the companion CD.
Because we had an error during install of the flows schema we repeat it (have removed the Flows-User and Flow-Files before) using ins.sql! The apache was still running.
Most of the new installation was fine but near the end we got:
error creating "Procedure arguments" id=122 Ora-01400, cannot insert NULL into ("FLOWS_010500,"WWv_Flows_STEPS","SECURITY_GROUP_ID")
declare
Error at line1
Ora-02291- integrity constraint(FLOWS_0150000.WWV_FLOW_PLUG_ZO_PAGE_FK) violated
parent key not found
ORA-06512 at "FLOWS_01500.WWV_FLOW_API line 4695
...

OK, it's solved:
I finally managed to install Apex 3.0 correctly once I figured out my error.
I was logging in remotely to the server the dadbase was on, then trying to connect to sqlplus using 'sys/password@instance as sysdba' to run the script.
Turns out that the problem had something to do with sys not being allowed to be sysdba when I log in remotely, or that having the username/password and instance info in there made the program think I was logging in remotely and therefore not giving me sysdba privileges.
The root of the problem was running the install .sql without the correct privileges.
Since I found out the database server I was trying to install on uses OS authentication, I remote-connected to the database server as the oracle user, tried to run the install .sql again after connecting to sqlplus: 'conn / as sysdba'
and everything worked like a charm!
~PF :)

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

Solution for Power Saver error during install

Hello,
i have read several topics about the powersaver error during install of this utilty.
i had the same problem even with a clean install of windows XP and i have found the solution.
The error seems to disapear and Powersaver works fine after install of the Hotkey utility :
http://support.toshiba-tro.de/tools/Satellite/sa60/win-xp/hotkey-dd/hotkey-dd-xp-10008sa-du.zip
Hope this post where helpfull.
Greetz DeLorean
[Edited by: admin]

Hi
You are absolutely right. Common modules is a kind of basic application who must be installed first. All other Toshiba tools should be installed after. The functionality of Power saver utility depends also on installed common modules.
Unfortunately I can not give you any kind of advice but in case that there is some error message the best solution is to remove and install the Power saver again. Check also Toshiba download page. Maybe you can find a newer version.
Bye

Quicktime errors during install, uninstall, or run

Quicktime errors during install, uninstall, or run. No error code. It just says it encountered an error and must exit.

I located a previous response that satisfied my issue. Below is the process that allowed me to use quicktime.
The "fatal error" in this context has (recently) been indicating trouble with old, misplaced QuickTime componentry lurking about in your system.
(Whether or not the message is a symptom of that problem seems to depend on what version of old misplaced stuff is lurking and what version of QuickTime proper we're trying to install or uninstall ... but in recent times, there's been an uptick in fatal errors being caused by that.)
So let's try investigating that possibility first.
First we'll adjust some view settings on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in "My Computer" open Local Disk C: (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Errors During Instalation Of Final Cut Studio 5.1

Aloha,
I am having some trouble here!! I am trying to install FCP Studio Pro 5.1 on my mac. I tried to do an upgrade from FCP 4.5 HD on my orriginal Hard drive. The instalation went through its paces & asked me to put in the second disc. I did then it came back with an anoucment that there were errors during instalation & to try again I did & was never able to get it to instal... Getting frustrated I ran diskworior on the drive & tried again no luck... after some time I thought it might be the drive would not let me because there was an earlier version on there.... so any way after some other problems with this drive I decided to completely erase & instal Mac OSX on my second hard drive that has never had anything on it. I made this my new startup disk & upgraded the OS to OS 10.4.9 I then Tried to install FCP Studio Pro 5.1 on this drive.. this time It never got to ask me to put in another disk it came back with the same error during instalation try again!!!!!! So now I am getting ******!! but odly enough Final cut studio shows up in my aplications. When I click on it it gives me a warning that there was an error registering & once I click ok it seems to launch FCP 5.1....... ?? So is it really there or not??? & why is it not installing the other 4 discs??? and to add insult to this I have tried to install iLife 06 & I get the same error!!!! WHY!!!!!!!!!
Another thing.. I installed FCP Studio Pro 5.1 on another Identical computer down the street & it installed no problem!!!!
Can anyone help Please!!!!!!

I would take a different approach.
I would backup the old drive files to an external, and then do a clean wipe and new install of OS, updates and the FCS.
Best way to do it, in my view.

FCP error during install.

I keep getting an error after installing FCP 5.1.1.
It says error during install please try again.
Im using 10.4.7 on my ibook 1ghz 640mb ram.
I know it will work because a friend has installed it on his.
Any one help?

This most often caused by a damaged or otherwise faulty disk in the package. It happens. Try cleaning the disks and then get out your receipt and serial number because your only recourse will be to call Apple for a replacement.
bogiesan

WRT160N error during install

I just purchased WRT160N and during the install of LELA there is an error. " Linksys Updater failed to start- verify you have sufficient privileges to start system services" pops up during install. Then it asks to retry and it hasn't worked or close window. Then when says this "Setup for Linksys Advisor has failed "Fatal Error During Install" please check your settings and try again.
Help! I am not computer savy, and don't want to start changing anything and screw it up.
Internet is working on the installed computer (I believe this is called the gateway? not wireless uses the ethernet cable)but I can't setup my wife's new laptop til this is fixed.
BTW this is a cable modem hook up if that makes a difference. I have tried restarting, turning power off as well but still get the same problem every time.
Thanks,
Don

As you have mentioned that your Hardwired computer is able to go online throught the router, and now you are trying to setup your wireless computer. You dont have to run the setup disk on your computer, you can configure all the settings on your Router manually and then make your Wife's computer go online wirelessly..
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

OMS error during install Grid control 10gR2 on Windows 2003

He,
I get this error during install Grid control 10gR2 on a new server win2003.
"oracle.sysman.emcp.agent.AgentPlugIn"
What I see in forums is that I have to stop my listener and continue my installation.
But I still have the same error !!
Can you please help?
Many thanks

There are some guidelines here:
Subject:      OracleAS Install Error When Configuring AS Console Agent - "oracle.sysman.emcp.agent.AgentPlugIn has failed"
     Doc ID:      Note:386308.1
The solution stated is "Check the contents of the hosts of file and ensure that every entry is correct. All hostname / ip addresses have to be valid."
When installing AS 9i R2 there was an issue with the names, those were supposed not to hava a hypen, so may be something was inherited from those kernels.
There is another metalink note that document hosts issues:
Problem: AgentCA: Grid Control Release 2 install fails with java.lang.Exception: 6 during Agent Configuration Assistant
     Doc ID:      Note:358640.1
~ Madrid.

Error during installing nw2004s for pi

hi,
i got the following error during create oracle database step in installing nw2004s
i am tring to install PI70(02) on same machine which i already installed solution manager(00,01)
i already patched oracle database as 10.2.0.2 and i am using loopback adapter
ERROR 2006-11-06 08:56:25
CJS-00084 SQL statement or script failed. DIAGNOSIS:
Error message: ORA-32004: obsolete and/or deprecated parameter(s)
specifiedORACLE
AI½ºAI½º°¡ ½AAUμC¾u½A´I´U.
ERROR 2006-11-06 08:56:25
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException:
error text undefined.
ERROR 2006-11-06 08:56:25
FCO-00011 The step createDatabase with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Doublestack_OneHost
ind
ind
ind
ind
3
0
NW_CreateDB
ind
ind
ind
ind
10
0
NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain
ind
ind
ind
ind
0
0
NW_OraDBStd
ind
ind
ind
ind
3
0
NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status
ERROR .
regards;
Dennis

Hi Dennis,
Check the alert_<SID>.log in your installation. Check if the error is shown there. The log file will show the obsolete parameter. In my case it was 'enqueue_processes'. Comment this parameter and save the init<SID>.ora file and click 'Retry' button.
The create Database phase should continue.
Award points if the solution is suitable.
Thanks & Regards,
Abhijit Deshpande

Error during install-Windows XP

iTunes was running on machine yet several days ago upon attempting to open received message> iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 2).
During install of iTunes I now get popup>ipodUpdaterExt.dll failed to register. HRESULT -2147024894. Choices are abort, retry and ignore, retry doesnt work so when ignored installation runs yet on attempt to open iTunes>Pop up of iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 2).
Have reinstalled Microsoft .NET Framework 3.5 SP 1 & Microsoft .NET Framework 4.0 per article iTunes for Windows: "Error 7" message when opening iTunes - Apple Support and also have Remove and Reinstall iTunes and other software components from Windows XP - Apple Support several times to no avail.
Any other items to check or look into inorder to get iTunes reinstalled and running would be helpful.

I try.... but my English is not really good so may be not exactly correct.
不是內部或外部命令、 ;
可執行的程式或批次檔 ;。
English:
Is not a internal or external Script;
executable Application or Batch File.
Message was edited by:
felix1000aa

Itunes error during install service apple mobile device failed to start.. help

I had to install Chrome browser in order to use my gmail account. Now I cannot open itunes on my Window Vista computer, get a Microsoft Visual C++ Runtime Library. R6034. I uninstall itunes and reinstall itunes 64-bit itunes installer. During install received error during the 'starting services' process "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privelges to start sytem services. I ignore with the same error message so I abort. At the end of uninstalling I received the Microsoft Visual C++ Runtime Library error again. I click ok than an error from itunes. "itunes was not installed correctly. Please reinstall itunes. Error 7 (Windows error 1114). I click ok. Help..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Premiere Elements 11 "installing Shared Technologies" error during install

How do I fix the "The installation process has encountered an error whil installing Shared Technologies. Please restart your system and try again." error while installing Premiere Elements 11? Photoshop Elements 11 installed fine, but I keep receiving this error while trying to install Premier Elements 11.
I have already tried:
Install from CD
Install from C: drive root
Install from Adobe website trial version
Install from CD, after clean boot
In each case it installs at the same place with the same error.
From searching these forums and doing a web search it seems like a common problem with no clear solution.

FFWLKin
I do not know if what I am about to report will help or confuse the Premiere Elements users further on this Shared Technology error encountered during Premiere Elements installation, but here is hoping that something in the following experience might be of help to someone....
I entered your thread with the Shared Technology error (targeting Elements Organizer/Data 7) when trying to install Photoshop Elements 10 and Premiere Elements 10 on a new Windows 8 64 bit computer. Unlike the others I had no problems installing Premiere Elements 11 and Photoshop Elements 11 from the Adobe installation disc a week earlier on this brand new Windows 8 64 bit computer. Short of re-formatting the hard drive, I did everything plus with no luck in getting versions 10 installed on this Windows 8 64 bit computer. So, I decided to focus on working with the already installed version 11 programs.
I headed for Premiere Elements 11 to create a DVD-VIDEO format on DVD disc and to my horror found that the program's burn dialog had no burner(s) in the burner location (either the build in one or an external burner (USB). But, Premiere Elements 11 burn to folder did work. On the other hand, I found that Photoshop Elements 11 Organizer File Menu feature to burn (datadisc) to CD or DVD did recognize these burners and that burn to feature worked. I went through the typical drill for those in this type of situation and nothing remedied the problem. So, I decided to go for the deactivate/uninstall/reinstall route. Well, now Premiere Elements 11 reinstallation ran into the same fate as Premiere Elements 10, that is, it ran into the Shared Technologies error related to installation of the Elements Organizer and Premiere Elements 11 would not install after going through everything decribed in this thread, excluding re-formatting the hard drive.
1. Deactivated/uninstalled Photoshop Elements 11 and Premiere Elements 11.
2. Apply the cclearer: cleaner and registry cleaner. And, then went into the Registry and deleted all related to Photoshop Elements 10/Premiere Elements 10 as well as Photoshop Elements 11/Premiere Elements 11.
3. Disabled firewall, antivirus, spyware...
4. Tried to reinstall Premiere Elements 11, using the installation files (setup.exe in 64 bit folder) copied to hard drive. No go. Same Shared Technology error.
5. Started deleting programs that I had installed after the initial successful installs of Photoshop Elements 11 and Premiere Elements 11 (these programs included iTunes, VLC player, and ImgBurn). Still no go for the Premiee Elements 11 install, and same Shared Technologies error.
FINALLY, Photoshop Elements 11 and Premiere Elements 11 got successfully installed on this Windows 8 64 bit computer according to the following scenario (iTunes, VLC player, and ImgBurn still removed from system...firewall, antivirus, spyware protection re-enabled)
1. Attached a USB burner to computer via one of its USB 3.0 ports.
2. Inserted the Adobe installation disc into the burner tray of this burner in order to install the program(s) via the installation disc.
3. Selected install for Photoshop Elements 11. It went to completion without problem.
4. Selected install for Premiere Elements 11. It went to completion without problem. And, now the burn dialog/burner location did recognize the computer's built in burner and my USB external burner.
None of the above may have had anything to do with what finally triggerd the version 11 installation processes to go to completion. But, I add this to the mix of how Photoshop Elements 11/Premiere Elements 11 finally got installed in Windows 8 for the user.
And, I would offer this suggestion to those who have already installed Premiere Elements 11 on their Windows 8 64 bit. As soon as possible make sure you have burners listed in the burner location of the program's burn dialog.
ATR

Error during install of the iTunes 11.0.1 update on Windows Vista

Error during the process of installing the iTunes update to 11.0.1, when iTunes attempts to write to file C:\Config.msi\b530a0c.rbf. iTunes says it can't access that directory, but i'm installing iTunes as an Administrator. And i don't find the specified file in this directory on my c:\ drive

I seem to have solved this problem as follows:
1. Download the iTunes.exe file from apple.com, but save the file to my Desktop rather than running it.
2. Execute (double click) the iTunes.exe file from my Desktop.
3. When i encountered the problem that i've reported (the iTunes installer announces that it can't access a file in the c:\config.msi directory, i clicked the Retry button in the error window. The iTunes installer process appeared to move past the error.
4. I experienced the same error one more time during my apparently successful iTunes 11.0.1 install, but the 2nd time this error came up iTunes reported that it was trying to access a different file name in the c:\config.msi directory. Again, i clicked the Retry button in the error window and the iTunes installer appeared to move on past the error.

Script error during install

Similar Messages

Maybe you are looking for