Script executed by another one

Hi everybody,
I want to write a script to execute another one. In the first one,the user must give some parameters(for example the number of records to insert in a table). By the second script,records have to be inserted in a table according the parameter the user gives. How may I do that?
Thank you for your help.

Hi thiand,
In your first script use start command including parameters,
@other_Script.sql param1 param2
In other script you can reference these through &1 and &2
[SQL*Plus|http://download-west.oracle.com/docs/cd/B12037_01/server.101/b12170/ch6.htm#sthref1061]
Regards
Peter

Similar Messages

How to make a VI wait to execute until another one finishes

Hi all,
I have been reading the labview help for the sync functions, but I am still confused about how to perform this simple task. I have a labview program that connects to a DSP via serial (RS232). I use VISA Read and VISA Write to read to and write from the device. My goal is to first write, wait until writing is finished, then wait for, say, 100 ms (so that it is ensured that all the data has been sent correctly), and then perform the read operation.
At the moment I have VISA Write connected to VISA Read via the error out-to-error in wire. However, I am not sure that they perform one after the other correctly, so I would like to implement a more robust synchronisation.
Thank you very much in advance
Solved!
Go to Solution.

There is also another issue with the synchronous mode on VISA calls. As far as LabVIEW is concerned it is done once the data has been handed to the OS or lower level drivers. For instance, if you use the synchronous call for a VISA write on a TCP connection it will virtually always return immediately even though a trace (using something like Wireshark) clearly shows the data being delaying, buffered and sent out well after the call to the write complete. Given this is NI's position on how this call should work I imagine you could run into the same thing with other interfaces. Their position is that once they have handed the data to the lower level for delivery the call is complete, regardless of whether the data transfer actually was completed.
Even so, if you know what the data you expect back looks like you can simply use the read timeout to effectively give you the delay. Putting arbitrary delays in such as the wait 100 ms may work now but not work in the future. You are far better off to use your actual data streams to control your synchronization. This is especially true in a command/response type of protocol.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

How can I script moving paths from one file to another?

Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!

Thanks! This one actually worked for me. Thanks for your help.
http://forums.adobe.com/message/3305389#3305389

Transfer executable report from one server to another

hi all,
How to transfer executable report from one server to another?
please reply fast
its urgent
thnx in advance

Kush,
To transfer a object from one server to another server it should be assigned to a package ie Dev Class so that a transport request can be created.Once the request is created we will release it using SE09 and then ask the basis consultant to move the request from Dev to Quality and then Dev to Production.
$TMP objects are called as local objects and can't be transported.
K.Kiran.

Not able to execute one Java program from another one via. exec()

Hi,
I am new to this forum, so I might be asking a very trivial quetion.
My program Ap1 is :
class Ap1
public static void main(String a[]) throws Exception
Runtime rt=Runtime.getRuntime();
Process p=null;
p=rt.exec("javac,Pr.java");
Runtime.getRuntime().exec("javac,Pr.java");
When I run the above program, I get below error at the line 7(bold one):
D:\batchwe>javac Ap1.java
D:\batchwe>java Ap1
Exception in thread "main" java.io.IOException: CreateProcess: javac,Pr.java err
or=2
at java.lang.ProcessImpl.create(Native Method)
at java.lang.ProcessImpl.<init>(ProcessImpl.java:81)
at java.lang.ProcessImpl.start(ProcessImpl.java:30)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at java.lang.Runtime.exec(Runtime.java:429)
at java.lang.Runtime.exec(Runtime.java:326)
at Ap1.main(Ap1.java:7)
Path is set as below(which seems correct):
D:\batchwe>path
PATH=C:\Program Files\Java\jdk1.5.0_05\bin
I am just wondering how to call one Java program from another one?!
Please help.
thanks
Rashmi

Hi diptaPB,
Thanks for your suggestion.
Here is how I tried it again, but not getting the desired output:
Class Pr looks like below -->
class Pr
public static void main(String a[])
System.out.println("hi from process");
When I run 'Pr' from command prompt, i get the desired output:
D:\batchwe>java Pr
hi from process
However, when I call 'Pr' from another program Ap2.java, it seems that it does not call 'Pr':
class Ap2
public static void main(String a[]) throws Exception
Runtime rt=Runtime.getRuntime();
Process p=null;
String[] cmd=new String[2];
cmd[0]="javac";
cmd[1]="Pr.java";
p=rt.exec("cmd");
D:\batchwe>javac Ap2.java
D:\batchwe>java Ap2
************* no output appears here***********************
Looking forward for your help.
regards
Rashmi

Spry Menu 2.0 issues in IE7..   yes another one!

I have CS4, and have used the widget browser to create a Spry Menu 2.0 and have imported it to my site. It displays fine in every browser except for IE7. I have been reading a LOT of threads on issues similiar to this one, so I'm prepared to tell everyone I know to upgrade to at least IE8!! However, I would like to fix it if possible. The menu bar is located in an include file and is attached to all my pages through the php function. I have made zero changes to the css code since I imported it into the site.
I also am wondering why there are two css pages for the menu bar.??
Any help would be appreciated..
One of the pages on the site is: michaelandrewshairstudio.com/offers.php
That page is: ( I have taken out some meta tags and content, but the div's are all still in place.) I also deleted some commented tags by accident when I imported it..
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Michael Andrews Hair Salon Offers</title>
<link href="Spry-UI-1.7/css/Menu/basic/SpryMenuBar.css" rel="stylesheet" type="text/css" />
<link href="Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet" type="text/css" />
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryDOMUtils.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryDOMEffects.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryWidget.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryMenu.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js"></script>
<link href="CSS/stylesA.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="outerwrapper">
<div id="header">
<div id="navbar">
<?php include("Spry-UI-1.7/includes/SpryMenuBar.php"); ?>
</div>
</div>
<div id="mainbody">
<div id="logo">
</div>
<hr />
<div id="content">
</div>
</div>
<div id="footer">
<div id="footernav">
</div>
<div id="footertext">
</div>
</div>
</div>
</body>
</html>
SpryMenuBar.css
#MenuBar {
background-color:#333;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif; /* Specify fonts on on MenuBar and subMenu MenuItemContainer, so MenuItemContainer,
            MenuItem, and MenuItemLabel
            at a given level all use same definition for ems.
            Note that this means the size is also inherited to child submenus,
            so use caution in using relative sizes other than
            100% on submenu fonts. */
font-weight: normal;
font-size: 14px;
font-style: normal;
padding:0;
border-color: #999999 #999999 #999999 #999999;
border-width:3px;
border-style: outset outset outset outset;
/* Caution: because ID+class selectors do not work properly in IE6, but we want to restrict these rules to just this
widget instance, we have used string-concatenated classnames for our selectors for the layout type of the menubar
in this section. These have very low specificity, so be careful not to accidentally override them. */
.MenuBar br { /* using just a class so it has same specificity as the ".MenuBarFixedCentered br" rule bleow */
display:none;
.MenuBarLeftShrink {
float: left; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBarRightShrink {
float: right; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBarFixedLeft {
float: left;
width: 80em;
.MenuBarFixedCentered {
float: none;
width: 80em;
margin-left:auto;
margin-right:auto;
.MenuBarFixedCentered br {
clear:both;
display:block;
.MenuBarFixedCentered .SubMenu br {
display:none;
.MenuBarFullwidth {
float: left;
width: 100%;
/* Top level menubar items - these actually apply to all items, and get overridden for 1st or successive level submenus */
#MenuBar .MenuItemContainer {
padding: 0px 0px 0px 0px;
margin: 0; /* Zero out margin on the item containers. The MenuItem is the active hover area.
    For most items, we have to do top or bottom padding or borders only on the MenuItem
    or a child so we keep the entire submenu tiled with items.
    Setting this to 0 avoids "dead spots" for hovering. */
#MenuBar .MenuItem {
padding: 0px 24px 0px 0px;
background-color:#333333;
border-width:1px;
border-color: #cccccc #ffffff #cccccc #999999;
border-style: none none none solid;
#MenuBar .MenuItemFirst {
border-style: none none none none;
#MenuBar .MenuItemLast {
border-style: none none none solid;
#MenuBar .MenuItem .MenuItemLabel{
text-align:center;
line-height:1.4em;
color:#cccccc;
background-color:#333333;
padding: 6px 15px 6px 39px;
width: 10em;
width:auto;
.SpryIsIE6 #MenuBar .MenuItem .MenuItemLabel{
width:1em; /* Equivalent to min-width in modern browsers */
/* First level submenu items */
#MenuBar .SubMenu .MenuItem {
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-weight: normal;
font-size: 12px;
font-style: normal;
background-color:#666666;
padding:0px 2px 0px 0px;
border-width:1px;
border-color: #cccccc #cccccc #cccccc #cccccc;
/* Border styles are overriden by first and last items */
border-style: solid solid none solid;
#MenuBar .SubMenu .MenuItemFirst {
border-style: solid solid none solid;
#MenuBar .SubMenu .MenuItemFirst .MenuItemLabel{
padding-top: 6px;
#MenuBar .SubMenu .MenuItemLast {
border-style: solid solid solid solid;
#MenuBar .SubMenu .MenuItemLast .MenuItemLabel{
padding-bottom: 6px;
#MenuBar .SubMenu .MenuItem .MenuItemLabel{
text-align:left;
line-height:1em;
background-color:#666666;
color:#cccccc;
padding: 6px 12px 6px 5px;
width: 7em;
width:auto;
/* Hover states for containers, items and labels */
#MenuBar .MenuItemHover {
background-color: #333333;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar .MenuItemWithSubMenu.MenuItemHover .MenuItemLabel{
background-color: #333333; /* consider exposing this prop separately*/
color: #ffffff;
#MenuBar .MenuItemHover .MenuItemLabel{
background-color: #333333;
color: #ffffff;
#MenuBar .SubMenu .MenuItemHover {
background-color: #666666;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar .SubMenu .MenuItemHover .MenuItemLabel{
background-color: #666666;
color: #ffffff;
/* Submenu properties -- First level of submenus */
#MenuBar .SubMenuVisible {
background-color:#333;
min-width:100%; /* This keeps the menu from being skinnier than the parent MenuItemContainer - nice to have but not available on ie6 */
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width:0px;
border-style: none none none none;
#MenuBar.MenuBar .SubMenuVisible {/* For Horizontal menubar only */
top: 100%; /* 100% is at the bottom of parent menuItemContainer */
left:0px; /* 'left' may need tuning depending upon borders or padding applied to menubar MenuItemContainer or MenuItem,
     and your personal taste.
     0px will left align the dropdown with the content area of the MenuItemContainer. Assuming you keep the margins 0
     on MenuItemContainer and MenuItem on the parent
     menubar, making this equal the sum of the MenuItemContainer & MenuItem padding-left will align
     the dropdown with the left of the menu item label.*/
z-index:10;
#MenuBar.MenuBarVertical .SubMenuVisible {
top: 0px;
left:100%;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse */
/* Submenu properties -- Second level submenu and beyond - these are visible descendents of .MenuLevel1 */
#MenuBar .MenuLevel1 .SubMenuVisible {
background-color: #ffffff;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse*/
top: 0px; /* If desired, you can move this down a smidge to separate top item''s submenu from menubar -
    that is really only needed for submenu on first item of MenuLevel1, or you can make it negative to make submenu more
    vertically 'centered' on its invoking item */
left:100%; /* If you want to shift the submenu left to partially cover its invoking item, you can add a margin-left with a
    negative value to this rule. Alternatively, if you use fixed-width items, you can change this left value
    to use px or ems to get the offset you want. */
/* IE6 rules - you can delete these if you do not want to support IE6 */
/* A note about multiple classes in IE6.
* Some of the rules above use multiple class names on an element for selection, such as "hover" (MenuItemHover) and "has a subMenu" (MenuItemWithSubMenu),
* giving the selector '.MenuItemWithSubMenu.MenuItemHover'.
* Unfortunately IE6 does not support using mutiple classnames in a selector for an element. For a selector such as '.foo.bar.baz', IE6 ignores
* all but the final classname (here, '.baz'), and sets the specificity accordingly, counting just one of those classs as significant. To get around this
* problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate compound classnames for IE6, such as 'MenuItemWithSubMenuHover'.
* Since there are a lot of these needed, the plugin does not generate the extra classes for modern browsers, and we use the CSS2 style mutltiple class
* syntax for that. Since IE6 both applies rules where
* it should not, and gets the specificity wrong too, we have to order rules carefully, so the rule misapplied in IE6 can be overridden.
* So, we put the multiple class rule first. IE6 will mistakenly apply this rule. We follow this with the single-class rule that it would
* mistakenly override, making sure the misinterpreted IE6 specificity is the same as the single-class selector, so the latter wins.
* We then create a copy of the multiple class rule, adding a '.SpryIsIE6' class as context, and making sure the specificity for
* the selector is high enough to beat the single-class rule in the "both classes match" case. We place the IE6 rule at the end of the
* css style block to make it easy to delete if you want to drop IE6 support.
* If you decide you do not need IE6 support, you can get rid of these, as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.js script.
* The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser is Internet Explorer 6. This avoids the necessity of IE conditional comments for these rules.
.SpryIsIE6 #MenuBar .MenuBarView .MenuItemWithSubMenuHover .MenuItemLabel /* IE6 selector */{
background-color: #333333; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar .MenuBarView .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel/* IE6 selector */{
background-color: #666666; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar .SubMenu .SubMenu /* IE6 selector */{
margin-left: -0px; /* Compensates for at least part of an IE6 "double padding" version of the "double margin" bug */
SpryMenuBasic.css
/* SpryMenuBasic.css - version 0.5 - Spry Pre-Release 1.7 */
/* Copyright (c) 2010. Adobe Systems Incorporated. All rights reserved. */
/* This is the css for a basic Spry 2 MenuBar.
* The first section is basic layout, and should in general not need to be modified.
* The final section of this file specifies images to use for arrows for the menu. These
* are either down or right-pointing as required by horizonatal or vertical layouts. You
* can either replace the referenced images with your own, or you can modify these rules to
* point to your won images.
* These rules are supplemented by those specified in the OAM file for inclusion in the html document,
* or alternatively, the file SpryMenuBarBasicSkin.css which is included with this widget. */
/* Resets for ul and li in menus */
.MenuBar .MenuBarView, .MenuBar .SubMenuView {
display:block;
list-style:none;
margin:0;
padding:0;
/*** Layout Rules for Basic Menu ***/
/* Top Level MenuBar
* Because we float the MenuItemContainers in the MenuBar, we have to make sure the menubar wrapper expands to hold them all.
* The simplest way is to float the widget wrapper
.MenuBar { /* overridden by .MenuBarVertical version of this rule */
float:left;
width:100%;
.MenuBarVertical {
float:left; /* Used to make menubar shirink to fit contents */
width:auto;
/* SubMenus */
.MenuBar .SubMenu {
display:block;
position:absolute;
top:0;
left:-10000px; /* By default, all non-visible submenus are hidden by moving way to the west */
padding:0;
/* First level of submenus - pulls down from horizontal menubar, right from vertical */
.MenuBar .SubMenuVisible{ /* overridden by .MenuBarVertical version of this rule */
top:100%;
left:0px;
.MenuBarVertical .SubMenuVisible {
top:0px;
left:100%;
/* All submenus below level 1. All pullout to the right */
.MenuBar .SubMenu .SubMenuVisible {
display:block;
position:absolute;
top:0px;
left:100%;
/* MenuItems, MenuItemLabels, and MenuItemContainers */
.MenuBar .MenuItem {
display:block;
text-decoration:none;
.MenuBar .MenuItemLabel {
display:block;
.MenuBar .MenuItemContainer {
position:relative;
white-space:nowrap;
float:left; /* overridden by .MenuBarVertical version of this rule */
display:block;
margin:0;
padding:0;
.MenuBarVertical .MenuItemContainer {
float:none;
.MenuBar .SubMenu .MenuItemContainer {
float:none;
/* Layout Rules needed by IE6 - excluded from other browsers */
.SpryIsIE6 .SubMenu .SubMenu {
width:100px;
height:1%;
.SpryIsIE6 .MenuBar .SubMenuVisible .SubMenuVisible {
width:auto;
/* End Layout section */
* Arrows - This section specifies arrow images for a submenu dropdowns in Basic SpryMenu.
.MenuBar .MenuItemLabel{
background-image:none;
/* For all arrows used here, we depend upon the image to push itself away from right edge, or the user can add right padding to the MenuItem */
.MenuBar .MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuDownGrey.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBar .MenuItemHover.MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuDownWhite.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBarVertical .MenuItemHover.MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBarVertical .MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBar .SubMenu .MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBar .SubMenu .MenuItemHover.MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
/* IE6 rules for Arrows */
.SpryIsIE6 .MenuBar .MenuItemWithSubMenuHover .MenuItemLabel{
background-image:url("images/ArrowMenuDown.gif");
background-position:right center;
background-repeat:no-repeat;
.SpryIsIE6 .MenuBarVertical .MenuItemWithSubMenuHover .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.SpryIsIE6 .MenuBar .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;

I love your subject line
Spry Menu 2.0 issues in IE7..   yes another one!
It is us as designers/developers that need to create websites for all current browsers. No sense in blaming the browsers, although in this case we could blame Spry Menu 2.0.
Problem with that is that Spry Menu 2.0 has been successfully tested in all modern browsers.
This leaves us with just one possibility, the designer/developer has erred somewhere along the line. After having checked the support files (JS and CSS) and looked at the markup, we now go to the constructor and see the following
var MenuBar = new Spry.Widget.MenuBar2("#MenuBar", {
    widgetID: "MenuBar",
    widgetClass: "MenuBar MenuBarLeftShrink",
    insertMenuBarBreak: true,
A comma after the last value.
I also am wondering why there are two css pages for the menu bar.??
One is the standard CSS for the menubar and under normal circumstances, should not be touched; the other is for the convenience of the designer/developer so that he/she can tweak the menubar to suit. If you wish, you can combine both. In all cases, keep in mind that the CSS for the standard (basic) menubar should come first, so that the other CSS can override the first.
This needs to be corrected in your document
Gramps

Execute more than one thing at the same time.

Hey why every time i want to execute more than one thing(create tables) at the same time
it say "ORA-00911: invalid character" , i dont wanna execute one thing at a time. check the pic please
http://img370.imageshack.us/img370/5120/oraclesw5.jpg
but in my school i use something called isqlplus and i can execute all the things i want at the same time with-out any error.
im using right-know
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production

1) Unless you are using something like DBMS_JOB, SQL*Plus, iSQL*Plus, the Oracle XE web-based front-end, or any other application is going to execute one SQL statement at a time.
2) There is a dedicated XE forum-- the folks over there might know how to run a script using this particular front-end.
3) Assuming the XE database is on your local system, you should be able to log in via SQL*Plus and use that utility to run your scripts.
Justin

I am unable to add contacts with their phone numbers. I add one press done and then it shows up but when I add another one the first one is deleted. How can I add them and make sure they stay. Upper left hand corner there is partial circle w/ arrow

I Unable to add contacts. I add one and then press done. It shows up but after I add another one the first one is gone. How do I save them?

Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

How to drop a schema and load another one?

I have an interruption during installing the central instance of a SAP Netweaver 04s System. After I restarted the installation I found this message in the Log file.
<b>ERROR 2006-08-16 16:17:04</b>
CJS-30109 The Java load in database PDV/liesc1ddbw01 has already been configured. <p> SOLUTION: Drop the schema and load it with a new load before running this installation.
<b>ERROR 2006-08-16 16:17:04</b>
CJS-30109 The Java load in database PDV/liesc1ddbw01 has already been configured. <p> SOLUTION: Drop the schema and load it with a new load before running this installation.
<b>ERROR 2006-08-16 16:17:04</b>
FCO-00011 The step getJavaLoadType with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|getJavaLoadType was executed with status ERROR.
QUESTION: How to drop a schema and load another one?

Hello,
I got the similar error....but i did reinstall from o.s. and done the installation again...it was worked successfully..
if you find out alternate solution for that ...please let us know..
Regards,

How come the same script only works in one form?

I made a checkbox that when checked it makes another subform visible. The script works perfect in one pdf. When I used the same script in another pdf (except I changed the variables of course) it doesn't work??????
It's set the same in both scripts. The subform name is exactly "CR" in uppercase. In the Events its set to click*, javascript at the client. Here is the script. Please let me know what's wrong????
if (this.rawValue == 1)
CR.presence = "visible";
else
CR.presence = "hidden";

You have to have the object referenced correctly and that can include subform and section information.

Getting a movie clip to stop playing, when another one is activated.

Hello,
I have a file with 3 movie clips and three buttons that control them to play...with the script below It is working fine.
stop()
function startImageOne(Event:MouseEvent):void
    imageOne_mc.play();
function startImageTwo(Event:MouseEvent):void
    imageTwo_mc.play();
function startImageThree(Event:MouseEvent):void
    imgThree_mc.play();
start1_btn.addEventListener(MouseEvent.CLICK, startImageOne);
start2_btn.addEventListener(MouseEvent.CLICK, startImageTwo);
start3_btn.addEventListener(MouseEvent.CLICK, startImageThree);
Then, I wanted to stop a movieClip, if another one was selected to play..so I inserted stop options to the function, which I thought would work, but doesn't. Does any one know why...See this code below..
thanks
stop();
function startImageOne(Event:MouseEvent):void
    imageOne_mc.play();
    imageTwo_mc.stop();
    imgThree_mc.stop();
function startImageTwo(Event:MouseEvent):void
    imageTwo_mc.play();
    imageOne_mc.stop();
    imgThree_mc.stop();
function startImageThree(Event:MouseEvent):void
    imgThree_mc.play();
    imageOne_mc.stop();
    imageTwo_mc.stop();
start1_btn.addEventListener(MouseEvent.CLICK, startImageOne);
start2_btn.addEventListener(MouseEvent.CLICK, startImageTwo);
start3_btn.addEventListener(MouseEvent.CLICK, startImageThree);
thanks
Babs

Hi Ned,
I checked the names and they are all correct...(I named one of the instances img instead of image, but it is all fine.
The movie clips are simple...They have a stop action in the first frame, and then it is just an image that fads in and fades out..
Pretty simple?
The code looks fine, so I can't figure out, why the movie clip that is currently playing doesn't stop, when another button is activated.
It seems like is should work??
I'll keep playing .. thanks!!
babs

[SOLVED] Bash: pkill a process after exiting from another one?

Hi there, I use a program which calls another one, but when I close the first one, the second one is not closed automatically even if not anymore needed, so I have to do it manually.
I tried a classic:
firstprogram
pkill secondprogram
but, of course, this script closes immediately the secondprogram.
So, what I supposed to do?
Thank you in advance!
Last edited by metre (2011-03-24 11:33:01)

hbekel wrote:Hard to tell unless you show us some code or at least mention the method used to launch the subprocess. Generally you should wait(3) for your child processes to exit before exiting your parent process, or terminate the child manually when the parent exits, e.g decide yourself when it is "not needed anymore".
thank you, I did it:
firstprogram
wait
pkill secondprogram
it works, woah

Replace an iView dynamically by another one by portal navigating service

Hi all,
A portal page to integrate several kinds of contents is in general the best way.
But how can you handle dynamic replacement of an iView of a page (the page contains more than one iView) by another one by using the Portal navigation service of the WebDynpro Runtime? If I navigate to the target application with mode WDPortalNavigationMode.SHOW_INPLACE, the content of the page at all is replaced by the target iView. Is there a possibility to access/replace only the desired iView of the page?
Thanks.
Cemal

Hi Laurent,
this is no possible with WebDynpro except the IFRAME - UI - Element of the webdynpro. But the iframe ui-element is declared as deprecated for future releases.
The solution is a portal component with an embedded html-iframe. The src - attribute of this iframe can be filled dynamically by the portal eventing.
You create a dynpage as a event receiver. This fills the src-attribute of the html-iframe by the event param dataObject.
The code below can help you:
Create output. Called once per request.
          public void doProcessBeforeOutput() throws PageException {
               Form myForm = this.getForm(); // get the form from DynPage
               IPortalComponentRequest request = (IPortalComponentRequest)this.getPageContext().getRequest();
               String Output =
                    "<iframe id='LauncheriFrame' src='' width='100%' height='100%' margin='0' padding='0' frameBorder='0'></iframe>"
                         + "<script>"
                         + "function <eventhandler>(eventObj){"
                         +"document.getElementById('LauncheriFrame').src = eventObj.dataObject;"
                         + "}"
                         + "EPCM.subscribeEvent('<namespace>', '<Eventname>', <eventhandler>);</script>";
               this.getPageContext().write(Output);
I hope that helps you.
Cemal

Creating SQL-Loader script for more than one table at a time

Hi,
I am using OMWB 2.0.2.0.0 with Oracle 8.1.7 and Sybase 11.9.
It looks like I can create SQL-Loader scripts for all the tables
or for one table at a time. If I want to create SQL-Loader
scripts for 5-6 tables, I have to either create script for all
the tables and then delete the unwanted tables or create the
scripts for one table at a time and then merge them.
Is there a simple way to create migration scripts for more than
one but not all tables at a time?
Thanks,
Prashant Rane

No there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need.

I had all of my video files that I work on in iMovie saved to an external hard drive exclusively to save space on my Macbook. I had just finalized a project, went to work on another one and files couldn't be found, were not deleted how do I find them?

I had all of my video files that I work on in iMovie saved to an external hard drive exclusively to save space on my Macbook. The other day I had just finalized a project and went to work on another one and when I opened the project I could see what should have been there, but scrolling over the entire clip I would only see black and that the file was missing. I did not drag anything on the hard drive to the trash or move anything. How can I get those files? These are videos of my kids and I am devastated and willing to try anything!

Control click does not work - no option to find files. I have no idea what to do. When I look at the usage of the external drive the space is being used, but I cannot find the files. I am going to try MacKeeper's Undelete and see if I can make any progress with it.

Script executed by another one

Similar Messages

Maybe you are looking for