Script Execution Order

Hi,
I'm getting the below scripts to be provided to DBA for deployment. The below renames "current" tables to OLD and NEW tables to "current". I would like it be executed in order. I always felt when F5 is hit, the queries start to run
in parallel.
How to make sure the subseqent statements do NOT run before the earlier statements get finished?
use SalesReporting
go
-- Rename Tables
sp_rename 'table1', 'table1_OLD'
sp_rename 'table2', 'table2_OLD'
sp_rename 'table3', 'table3_OLD'
sp_rename 'table1_NEW', 'table1'
sp_rename 'table2_NEW', 'table2'
sp_rename 'table3_NEW', 'table3'
Thanks

I don't know why do you think the statements will not execute in order. If you put them in a stored procedure and run it, they will be executed in the order they are written (unless you try to run them in SSIS).
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Similar Messages

[SOLVED] Netctl script execution order?

The man pages are bit ambiguous, but this is what I'd like to know:
Given I'm connecting to wireless network "MyESSID" on interface "wlan0", what is the execution order of these scripts:
/etc/netctl/hooks/*
/etc/netctl/interfaces/wlan0
/etc/netctl/wlan0-MyESSID (ExecUpPost)
Given I'm disconnecting from the same interface/essid, what is the execution order again:
/etc/netctl/hooks/*
/etc/netctl/interfaces/wlan0
/etc/netctl/wlan0-MyESSID (ExecDownPre)
Some of my wireless networks need proxies, and others don't.
I'd like to start/stop Dropbox on connect/disconnect of any network (but only after the proxies are set)
Thanks in advance!
Last edited by sxtynnmach1 (2013-07-27 05:38:39)

Added the feature request to the netctl github page.
Since the hooks/interface scripts are sourced instead of passed to a subshell, they have access to previously-defined variables. At the time of this writing, when netctl sources it's hooks and interface scripts the following are already available in the environment:
$interface (ex: wlan0)
$profile (ex: wlan0-essid)
$action (ex: CONNECT, see wpa_actiond --help)
$ssid
Following the convention of prepending two-digit numbers to my scripts to enforce execution order, I have gotten pretty fine-grained control over my scripts and netctl actions
/etc/netctl/hooks/10-proxy.sh
#!/bin/sh
if [ "$profile" = "wlan0-companyESSID" ]
then
case "$action" in
"CONNECT"|"REESTABLISHED")
export http_proxy="http://proxy.company.com:8080"
unset http_proxy
esac
fi

Get Agent IP Address During Script Execution

Good Evening,
I'm looking for a little advice... I'm trying to develop a method of alerting agents to the fact they are not ready. I have a script that can dynamically change the wallpaper on an IP phone. My aim is to add a step to the "Select Resource" portion of a script that will execute if an agent doesn't answer a call presented to them. However in order for this script to work it requires the IP address of the phone the agent is logged on to. Can anybody recommend a method of getting this IP dynamically during script execution? We use EM so statically defining IPs in an XML document wouldn't be appropriate.
On a similar note I'd also need a method of executing the same script when an agent manually alters their state to ready. i.e. When they change to ready on the IP Phone Agent I'd like to be able to intercept that process as it takes place and automatically trigger this same script.
I'm using UCCX 8.5(3).
Hope that makes sense. Any suggestions regarding how to achieve this would be much appreciated.
Much appreciated,
Ryan

I don't write enough scripting to know for sure if the agent's phone's IP address would be available anywhere in the UCCX enviornment by default but I'm going to go with 'probably not'. You'd need to obtain this information from CUCM, the most straightforward method would likely be to use CUCM's AXL interface to pull this information. The HTTP Document Step may be able to produce the necessary AXL requests I guess, but I've never tried.
Cheers,
Kris

Help 'Exiting' after Automator Shell Script Execution

Hello,
I've recently installed and got running GCalDaemon (http://gcaldaemon.sourceforge.net/) which allows me to Synch Rainlendar <-> Google Calendar through iCal (You can also synch iCal <-> Google Calendar). I needed to start up a shell script/applescript after each startup/login in order for GCalDaemon to start the synching process each time and continue to do so at the timed intervals. I would do so by the following terminal code:
cd /usr/local/sbin/GCALDaemon/bin
./standalone-start.sh
I then tried automating this process and came across shell script execution through Automator. I did so and created a .app with the above mentioned code. This works and it starts up the necessary .sh file I need and the snyching works under StartUp. My concern is however, how do I exit terminal once the code has executed the necessary file? All I have in my .app is the above mentioned code for now. I just need it to exit terminal because on startup or after starting the program, I get this issue (See Attachment)
This continues to run, so my guess is that I need to add code to exit terminal and allow the .app to close itself properly after doing so.
Please guide me in the right direction.
Picture Belows shows what happens when I run the Automator App. It continues to run until I quit out of the app manually (TheGCal programs works fine though). I feel I need to have app quit Terminal or fully end the process and quit out on it's own.
Thanks
<table style="width:auto;"><tr><td></td></tr><tr><td style="font-family:arial,sans-serif; font-size:11px; text-align:right">From GCalDaemon</td></tr></table>

i redirected the command output to /dev/null which is unix equivalent of a black hole and I also redirected error output to standard output in case the script produces any errors.
also & at the end tells it to continue without waiting for the script to finish.
Message was edited by: V.K.

Actionscript execution order with attachMovie statements

Hi I wonder if anyone's got any decent solutions to this...
Basically whenever I have a script generating an interface by
dynamically placing movie clips (using the attachMovie method), I
often need the actionscript of the attached movie clip to execute
before the rest of the code in the main script continues.
According to normal actionscript execution order, the current
script finishes before 1st frame actionscript of any attached
movies is executed, so say for example I had the following in frame
1 of my root timeline:
trace("start");
this.attachmovie("myMovieClip","movieClip1",this.getNextHighestDepth());
trace("end");
and the movie clip in my library with the linkage identifier
"myMovieClip" has the following on frame 1 of its timeline:
trace("middle");
Normally this would output:
start
end
middle
However I want it to output:
start
middle
end
The only appropriate way I've found so far to do this is to
have a function that is called on completion of the myMovieClip
actions, i.e. in the root timeline:
trace("start");
this.attachmovie("myMovieClip","movieClip1",this.getNextHighestDepth());
movieClip1.onLoaded=function() {
trace("end");
and in the timeline of the myMovieClip movie clip:
trace("middle");
this.onLoaded();
But the problem with this is that if I rather than the
trace("end"); statement I want a series of other commands,
some of them in turn using attachMovie methods, again wanting the
scripts to execute in the order above, I'm going to end up with a
lot of nested onLoaded functions and it's going to end up looking
pretty ugly!
Any thoughts?

you're welcome.
i generally load everything sequentially. if you don't want user's to possibly advance into the display far enough to see a load-delay, then you can use some preload display. here's an example i'm doing for a current client:
www.kglad.com/Files/tf
and click portfolio.
this client has a lot of images to load and wants them presented as soon as possible so i load them sequentially. that makes for an orderly display (though this client only wants a few images viewable on-stage at any one time).

Error with dbms_scheduler and shell script execution

Hi,guys.
I have an issue with a dbms_scheduler and a shell script execution. So, the shell script as it self works fine, when i'm executing ./test.sh all process is running, but when i'm executing the script from dbms_scheduler it just simply doesn't work. Actually it works, but some of executable information in sh doesn't work, seems it just jump over of the part of the script. Sendmail part is running, maybe there is problem with rman script as it self?
DB version: 10g
And my scripts:
Shell scripts (permisons 755):
#!/bin/ksh
export PATH=/home/oracle/product/asm_home/bin:/home/oracle/product/db_home/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11:/sbin:.
export ORACLE_BASE=/home/oracle/product
export ORACLE_SID=zabbix
export ORACLE_HOME=/home/oracle/product/db_home
${ORACLE_HOME}/bin/rman<<EOF
connect target /
run {backup recovery area delete all input;}
EOF
{       echo "From:[email protected]"
        echo "To: [email protected]"
        echo "Subject: Recovery area"
        echo 'Content-Type: text/html'
        echo
        echo '<html><body><table border="1" cellspacing="1">'
        echo '<tr><td><b>Process</b></td><td><b>Statuss</b></td></tr>'
        echo "<tr><td>RMAN</td><td><b>Works</b></td></tr>"
        echo "</table></body></html>"
} | sendmail -tIn the first part i'm exporting all of the important stuff for oracle, then I call RMAN with specific atributes. And then there is just simply sendmail functionality inside script to represent if script works (for now).
And below pl/sql script:
begin
DBMS_SCHEDULER.CREATE_JOB
job_name => 'FLASH_RECOVERY',
job_type => 'EXECUTABLE',
job_action => '/home/oracle/backup/test.sh',
start_date => sysdate,
job_class => 'DEFAULT_JOB_CLASS',
enabled => TRUE,
auto_drop => FALSE,
comments => 'FLASH RECOVERY USAGE AREA backup and delete'
END;
/And this job execution:
       begin
           DBMS_SCHEDULER.run_job (job_name =>'FLASH_RECOVERY',use_current_session => TRUE);
       end;What can be wrong? For me, I think it's something with permisions.
I hope you got my idea and could help me.
Tom
Edited by: safazaurs on 2013.18.2 22:16

There is no error, i just receive all the time e-mail, seems it jumps over rman. I tried almost everything and still couldn't get result as i want. And, if i'm running script from command line - it works. Rman calls, and starts to recover archivelogs.

Error when using FTP in iWeb 09! "Error 500: Script Execution Failure"

I have my domain through 123-reg and I have free hosting with host-ed.net when I add a simple index.html file my website works fine displaying the 1 line of text that I asked for, so it is all configured correctly.
How ever when I use the FTP upload thought iWeb '09 I always get "Error 500: Script Execution Failure"
www.breslan.co.uk
Anyone know why?

I have logged into my hosting and changed the permissions to '755' and move the files from the folder iweb used to the root of the site i know get "Parse error: syntax error, unexpected T_STRING in /~/www/breslan.co.uk/index.html on line 1" there is only 1 line of code in index.html and that is
<?xml version="1.0" encoding="UTF-8"?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><title></title><meta http-equiv="refresh" content="0;url= Welcome.html" /></head><body></body></html>
please help!

Script execution problem

dear sir
i got a problem with script execution. i have successfully activate the form painter in ABAP editor. but i am getting the error like "Form ZLASRISUD language EN is not active and has no errors". please give me the solution for above as soon as possible.

dear sir
i got a problem with script execution. i have successfully activate the form painter in ABAP editor. but i am getting the error like "Form ZLASRISUD language EN is not active and has no errors". please give me the solution for above as soon as possible.

Automation Script execution

Hello All,
How i will do Automation script execution in Production
We have a bunch of scripts (Packages , DDL & DML ) everyday. What is the better aproach to do automatic script execution without any issues ?

Hi,
You have two options.
1) Oracle job scheduler
2) Windows Tasks
Oracle job scheduler you can run it by your requirement. you can create it like below:-
begin
DBMS_SCHEDULER.CREATE_JOB(
JOB_NAME           =>      'JOB_FOR_TEST',
JOB_TYPE           =>      'PLSQL_BLOCK',
JOB_ACTION         =>      'begin YOUR_PROCEDURE_NAME; end;',
START_DATE         =>      SYSTIMESTAMP,
END_DATE           =>      NULL,
COMMENTS           =>      'JOB IS CREATED FOR TEST ONLY.',
ENABLED            =>      TRUE,
REPEAT_INTERVAL    =>      'freq=daily; byhour=20; byminute=0; bysecond=0;');
end;
/Above job will run on 8pm daily.
likewise since i dont know whether you are on windows or linus or unix etc... you can scheduler windows level tasts...

Report script execution is getting failed

Hi ,
We are facing one strange issue while executing the Essbase report script. I am new to the report script and I am not getting how to resolve the issue.
When we are changing the year in code from FY13 to FY14 the script is getting failed however the same script is successfully generating the report if we keep year as FY13 in code.
Could you please let me know where would be the problem , below is the part of the code form Report script.
{MISSINGTEXT "0"} // replace #Missing with 0
<Link ((<LEV("Customer", "Lev0,Customer")) AND ( <IDESC("All Customers")))
<Link ((<LEV("Product", "Lev0,Product")) AND ( <IDESC("All Products")))
<Link ((<LEV("Period", "Lev0,Period")) AND ( <IDESC("YearTotal")))
FY14

Hi ,
I am getting below error message.
"Report Script execution Failed. Please see message panel for details " and in message panel It is not showing any details , just displaying Execute Report script Failed with date and time details.
I also checked that FY14 do exist in the application and no duplicate FY14 member exist in the outline.
Could you please suggest where would be the problem.

Execution order of Multiple Numeric Limit Test?

What is the execution order of "Multiple Numeric Limit Test" in TestStand 2010?
I am using a custom steptype of Multiple Numeric Limit Test. I want to manipulate the input parameter. How can I do that. I am not interested in making a new steptype. I am writing in Post-Expressions and the data is manipulated as they should but it is not evaluated. I is evaluated before the Post-Expressions executes.
For example I am writing: Step.NumericArray[0]= Step.NumericArray[0]*1000/(2.5-Step.NumericArray[0])
The execution order when looking at the TS manual at page 3-13 is Evaluate Post-Expression before Evaluate Status expression. But it is not what I see. I have also tryed using the more simple Numeric Limit Test and it works as I expect it to according the manual.
Anyone knows about any workaround for that?

Hi Ray
Thanks for your reply
I have tried writing what you are suggesting: Step.Result.Measurement[0].Data= Step.Result.Measurement[0].Data*1000/(2.5-Step.Result.Measurement[0].Data)
Still it evaluates the step before the post-Expression. When I am looking at the variables at runtime the Step.Result.Measurement[0].Data is having the correct value but it seems to evaluate the step before the Post-Expressions.
Any other suggestions?

What is the different type mapping faster execution order ?

Order is XSLT, JAVA(SAX), JAVA(DOM), Graphical(sax), and ABAP mappings ?
Is there any Graphical mapping with dom parser ?
Please send the faster execution order .

Hi,
I am not getting exactly what you are looking for,
I think I already had answered your questions in your previous blog
Mapping types performance
Is there any Graphical mapping with dom parser ?
-->Graphical mapping with DOM parser is not possible, thus you have to go for Java Mapping
JAVA mapping
/people/amjad-ali.khoja/blog/2006/02/07/using-dom4j-in-xi--a-more-sophisticated-option-for-xml-processing-than-sap-xml-toolkit
Mapping Techniques
Please let me know if any specific thing that you will be looking for, so accordingly we could narrow down the analysis and answers.
Thanks
Swarup

MAXL problem for launching a script in order to disconnect users in a cube

Hello,
I would like to know how i can launch a maxl script in order to disconnect users who are connected on a cube. When i do this :
IEssDomain dom2 = ess.signOn(USER, PASSWORD, false, null, PROVIDER);
cv = dom2.openCubeView("EssaiBis", SERVEUR, APPNAME, CUBENAME);
IEssMaxlSession maxl = dom2.openMaxlSession("maxl", SERVEUR);
String strQuery = "alter application "+APPNAME+" unload database "+CUBENAME+";";
maxl.execute(strQuery);
maxl.close();
The APPNAME, the CUBENAME, the SERVEUR, the USER, the PASSWORDn and the PROVIDER (embedded) are OK. However, it jumps the commands which are under the : IEssMaxlSession maxl = dom2.openMaxlSession("maxl", SERVEUR);
So, the problem seems to be here.
Thanks you for your help.
Vinou

It seems that it doesn't take the "+" in the script on the forum ^^

Dashboard Prompt Execution Order

Hi everyone,
I wanted to create a few test cases to see which order the Dashboard prompts were executing. What I did was I created two identical dashboard prompts, DBP1 and DBP2, on column "Account Number". I set DBP1 to Default to Specific value of 1. I set DBP2 to Default to Specific value of 2. My assumption is that the last prompt that executes is the value that will be shown in a dashboard.
I put the two prompts into a Dashboard and ran a few tests and here is what I found out:
1. The order in which the prompts appear are the dashboard is irrelevant to the execution order.
2. The value to which the prompts are set to is irrelevant to the execution order
3. The name of the dashboard prompts is irrelevant to the execution order
4. The alias of the dashboard prmopt is irrelevant to the execution order
In my trials, the second dashboard prompt's value was always the one being shown. So I created a third dashboard prompt DBP3 set to value 3. Then all the prompts had 3 as their value. My conclusion is that DB prompts are executed in the order in which they are created. Some where in their metadata, there must be a sequence number or internal ID that grows each time a DB prompt is created. Then OBIEE uses this identifier to determine execution order.
Can anyone confirm or deny that?
Thanks!
-Joe
Edited by: Joe Bertram on Dec 5, 2009 10:44 AM

Hi Sunil,
Thanks for the reply. You are correct. Its seems that the dashboard prompts do execute asynchronously.
It turns out the reason why I was seeing newer dashboard prompts taking precendent over older dashboard prompts has to do with the cache. Apparently the last dashboard prompt in the cache, is the value all the prompts will have.
thanks!
-Joe

Control subvi execution order

I have a test program with 2 subVIs and the first one simply creates a text file and writes a large string to it, the second one writes another string to the same file and then closes it. Is there a way to set execution order as the subVI that writes and then closes the file seems to be executing first. The subVis are independent from each other. Thanks.

No. Just wire the error out of the first VI to the error in of the second VI.
When you switch from a text-based language to LV, the hardest thing to realize is that the position on the diagram has essentially nothing to do with the order of execution. The dataflow concept is very powerful but quite foreign to text programming. The core point is that any node (function, subVI, structure,...) may begin to execute when data is present at ALL of its inputs. Similarly, the node's outputs are not available until the node completes its execution.
Lynn

Script Execution Order

Similar Messages

Maybe you are looking for