Script for combining multiple documents?

hi there,
well I think there's been a lot of discussion going towards this topic. My concerns aren't quite lining up with the topics. We using a script for placing images, and instead of going document to document...I would like to combine all the indd documents...there's usually at least 24...and to import NOT as pdf's, just as individual pages within the one document...insert my images using the other script...and then later choosing to re-export the pages as individuals. With ascending order of page numbers in the correct sequence they were brought in as.
thanks for the help.

-Printing by folder only helps when I need to run one copy of the files, typically I need to print multiple copies or save them for future printing. Also I have had errors printing via that method before because it will sometimes overload the printer queue.
-It would be great if clients always provided print ready documents, but that is usually not the case and I have to correct it which is why I am here asking how to do this.
And if you can not do that then you need to insert a blank page into the files with an odd number of pages.
Right. That is what I am looking for; something to automate inserting a blank page into files that have an odd number of pages WITHOUT knowing the documents page counts before hand and WITHOUT having to manually insert blank pages.

Similar Messages

Sender ebXML Adapter for handling multiple documents

Hi all,
I would like to ask for input on how to implement the use of sender Seeburger ebXML channel that will send multiple documents types (CIDX ordercreate and CIDX orderchange).
For Seeburger AS2 adapter, handling of ANSI X12 documents (EDI850 and EDI860) can be done using Generic AS2 sender and Split997 adapters, and message splitter configuration. Is there same functionality that can be used for sender Seeburger ebXML adapter for handling multiple non-ANSI X12/EDIFACT documents like CIDX OrderCreate and CIDX OrderChange?
Thanks,
Edward

Hi,
Can we hit 100 Email ids to read email using single mail adapter?
no, you have to configure url / authentification in the adapter what is obviously different for different ids.
Can we achieve it using standard module?
Do we need to develop custom module to read emails from 100 mail ids?
You don't need module, you need 100 sender channels.
/Udo

UCCX Scripting Question- combining multiple scripts into one -Transfers/subflows

I need to separate an existing call center into two because their hours are different and the main lines have separate DIDs.
The two separate call centers must have the same agents and same queues, including Agent Personal Queues as Menu options. Callers need to be able to choose to go to either the Main Queues, or listen to another menu that allows them to select and option to be sent to a personal queue
I have three separate scripts, CCA, CCB, and Agent Personal Queue, same queues, same switch (calledNumber) with the same trigger(DNs) and I was about to create three separate applications, but then realized the triggers can only point to one application
What is the best way to set this up?
Option A
Script A (CCA )- Has all the "Switch-(Called Number) with all the trigger
Script B -Has no Switch, just Transfer to extension(and then the call goes out to the trigger)
Script C - is the Personal Queue Script
Option B
Combine all three scripts into one-separate the TOD logic, have the same queues and menus beneath each call center and Personal Queue tree, is going to be a really large file

Hello-
I would likely use a single script for your application. That being said looking at your screenshot it looks like your script could use some clean up and consolidation.
DJ

Free script for replacing multiple footage files

Hello!
I made a simple script for easily changing multiple footage paths. I'm a 3D artist and found it a burden to replace all the vray render passes every time I rendered a new version. I'm sure it has other uses as well, like checking and setting which of your footage files are local and which ones are on a fileserver.
You can also copy and move footage from one file to another with this tool.
I'm not a professional scripter and would like some comments and crits. What would be the best place to publish something like this? For 3ds max there's scriptspot.com, is there something similiar for adobe scripts?
Use at your own risk. Download here.

looks useful for managing multipasses. Have a look at aescripts.com for publishing your script.

Script for emailing multiple file types?

Is there a script that will allow me to place a button on a form, that when clicked, will email the completed form in PDF format as well as in csv, or xml format?
Thanks!

Wow, thanks. That was extremely helpful, but I have a couple questions.
First, is there a way to make it print to CUPS without opening the default application for the particular file first? For example, I used a .docx file, and it had to open microsoft word to send the job the print. This makers it very unpredictable to decide how much time the automator application will need to pause. If that file were for example, and adobe illustrator file, it would take an incredible amount of time just for illustrator to open. I don't really anticipate needing to do this a whole lot with anything other than text files and standard image types, but is that the only way for those other files to print? I figured that since OS 10.6 can do a quick look preview on just about any file type I use, that the OS would be able to do this without the application actually opening, but it seems not to be the case. Just wondering.
The other issue is the only real problem, and it's one that I have had whenever I use automator to make PDFs. It always duplicates the job. So, I am getting a combined pdf, but it has the same file in there 2 or even 3 times.
In automator, I used:
get selected finder items
then
print finder items
I have verified that it is printing everything multiple times because I see them going into the CUPS folder twice. Then, the final PDF sometimes even has the same doc or image in it 3 times. I have always had this problem with automator and PDFs, any idea how to solve that?
Other than that duplication issue, this seems like it will work perfectly! Thanks for the reply here!

Issue in FDM Import script for ading multiple amount columns.

Hi,
I am trying to import the Multiple amount columns to be addedd and imported as one amount column.Below is the script I am using for the same,script is getting verified in Script editor but When I am trying to Load the File I am gettig an error as below.
ERROR
Code............................................. 9
Description...................................... Subscript out of range
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 8380
Scirpt
Function Import_YTD(strField, strRecord)
'Set variables
dim strCurmnth1
dim strCurmnth2
dim strCurmnth3
dim strCurmnth4
dim strCurmnth5
dim strCurmnth6
dim strCurmnth7
dim strCurmnth8
dim strCurmnth9
dim strCurmnth10
dim strCurmnth11
dim strCurmnth12
dim strCurAmount
strCurmnth1 = Trim(DW.Utilities.fParseString(strRecord, 20, 9, ","))
strCurmnth2 = Trim(DW.Utilities.fParseString(strRecord, 20, 10, ","))
strCurmnth3 = Trim(DW.Utilities.fParseString(strRecord, 20, 11, ","))
strCurmnth4 = Trim(DW.Utilities.fParseString(strRecord, 20, 12, ","))
strCurmnth5 = Trim(DW.Utilities.fParseString(strRecord, 20, 13, ","))
strCurmnth6 = Trim(DW.Utilities.fParseString(strRecord, 20, 14, ","))
strCurmnth7 = Trim(DW.Utilities.fParseString(strRecord, 20, 15, ","))
strCurmnth8 = Trim(DW.Utilities.fParseString(strRecord, 20, 16, ","))
strCurmnth9 = Trim(DW.Utilities.fParseString(strRecord, 20, 17, ","))
strCurmnth10 = Trim(DW.Utilities.fParseString(strRecord, 20, 18, ","))
strCurmnth11 = Trim(DW.Utilities.fParseString(strRecord, 20, 19, ","))
strCurmnth12 = Trim(DW.Utilities.fParseString(strRecord, 20, 20, ","))
If strCurmnth1="" Then strCurmnth1="0" End If
If strCurmnth2="" Then strCurmnth2="0" End If
If strCurmnth3="" Then strCurmnth3="0" End If
If strCurmnth4="" Then strCurmnth4="0" End If
If strCurmnth5="" Then strCurmnth5="0" End If
If strCurmnth6="" Then strCurmnth6="0" End If
If strCurmnth7="" Then strCurmnth7="0" End If
If strCurmnth8="" Then strCurmnth8="0" End If
If strCurmnth9="" Then strCurmnth9="0" End If
If strCurmnth10="" Then strCurmnth10="0" End If
If strCurmnth11="" Then strCurmnth11="0" End If
If strCurmnth12="" Then strCurmnth12="0" End If
'Calculate the YTD Amount
strCurAmount = CDbl(strCurmnth1) + CDbl(strCurmnth2) + CDbl(strCurmnth3) + CDbl(strCurmnth4) + CDbl(strCurmnth5) + CDbl(strCurmnth6) + CDbl(strCurmnth7) + CDbl(strCurmnth8) + CDbl(strCurmnth9) + CDbl(strCurmnth10) + CDbl(strCurmnth11) + CDbl(strCurmnth12)
Import_YTD =strCurAmount
End Function

Hi,
how many columns has your file?
that error means you are trying to access an invalid position.
Regards

MSSQL Query/View Single Line Output For Combined Multiple Data Elements - Possible Pivot Table?

HELLO...
I hope you experts out there can help me. Consider the following (2) Tables in MSSQL:
1. TENDERED --> Primary Key = DATE / DOC_NO / PAYMENT_SEQ_NO
DATE
DOC_NO
PMNT_SEQ_NO
PAYCODE_TYPE
AMOUNT
2. TENDERED_CR_CARD -->Primary Key = DATE / DOC_NO / PAYMENT_SEQ_NO
DATE
DOC_NO
PMNT_SEQ_NO
CR_CARD_NO_MASKED
CR_CARD_NAME
CR_CARD_EXP_DATE
These two tables are certainly related, based on their Primary Key values.
Now, consider the following data in those two tables:
DATE
DOC_NO      PMNT_SEQ_NO
PAYCODE_TYPE
AMOUNT
03/10/2014         100001
1
CASH
100.00
03/10/2014         100001
2
CASH
-9.75
03/10/2014         100002
1
CASH
50.00
03/10/2014         100002
2
VISA
100.00
03/10/2014         100002
3
VISA
               250.00
03/10/2014         100003
1
                        MC
125.00
03/10/2014         100003
2
AMEX
75.00
DATE
DOC_NO PMNT_SEQ_NO CR_CARD_MASKED
NAME
CR_CARD_EXP
03/10/2014 100002   2                       4225******801289
MARY JONES   2016/08/31
03/10/2014 100002   3                       4121******637442
JOHN DOE      2015/04/30
03/10/2014 100003   1                       5428******971134
MIKE BAKER   2018/09/30
03/10/2014 100003   2                       3732*****344756
LINDA LIU      2017/07/31
OK...so what we NEED...is a Combined, SINGLE RECORD Audit Report type query.
The resulting query should show, based on the Data from above, the SINGLE LINE represented in the Attached Spreadsheet.
NOTE...what's important to point out here..is that ONLY the 'CASH' Tender gets "summed"...EACH INDIVIDUAL Credit Card record MUST have its own Field...as represented in the corresponding Columns of the Spreadsheet (i.e. PMT_TYP_1, AMT_1, PMT_TYP_2,
AMT_2, and so forth).
PLEASE HELP! Any suggestions/advice would be most appreciated!
Thank You!...Mark

I would not do this in SQL if I could possibly avoid it. Instead do it in the front end.
If you must do it in SQL, this is a dynamic pivot on multiple columns. Naomi Nosonovsky has a blog at
http://blogs.lessthandot.com/index.php/DataMgmt/DataDesign/dynamic-pivot-on-multiple-columns/ on how to do that. Look especially at her second example using the claims table. Of course, you must do some manipulation even before you do the multi-column
pivot, since you must first combine all the cash entries.
So one way to do it would be to build a temp table with all the entries you have except the cash entries combined into one payment sequence number. To do that you may need specifications that are not clear to me from what you have given us. For
example, if PMT SEQ 1 is VISA, PMT SEQ 2 is CASH, PMT SEQ 3 is VISA, PMT SEQ 4 is CASH, and PMT SEQ 5 is VISA, you want to combine the two cash payments. So they become PMT SEQ 2? If so, what happens to PMT SEQ 4 - is it left N/A or does
PMT SEQ 5 become PMT SEQ 4?
But once you have this temp table with the cash payments combined in the algorithm you need, then you can use Naomi's method to do the multi-column pivot. Note that Naomi uses the code
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_Name = 'Claims'
to get the column names from the permanent table Claims. To get the column names from a temp table use code like the following. To find the column names in a temp table named #MyTempTable, do
From tempdb.sys.columns
Where object_id = OBJECT_ID('#MyTempTable')
But as I say, if feasible, I would do this in the front end, not in SQL. T-SQL is a very good language for storing and retrieving data, not so good at formatting it.
Tom

Script for moving multiple subtitle clips in the works - EXAMPLES NEEDED!

Hi everyone!
One severe deficiency of DVD Studio Pro is the inability to move multiple subtitle clips back or forward in a track by an arbitrary offset.
I ran into this problem while I was creating a DVD from an EyeTV recording of a DVB broadcast, the subtitles from which have to be extracted to a SON file and a bunch of .bmp images with a separate piece of software, ProjectX. For some reason, ProjectX messed up the subtitle timecodes, so I had to move the entire track forward by a fixed amount. Unable to do this inside DSP, and unable to find tools that would do this for SON files, I set out to code my own tool with Python.
Currently, I have a very simplistic working version of the script, which I successfully used to shift the timecodes of the aforementioned SON file.
This got me thinking: I can't be the only one who has faced this problem. So, in the spirit of giving something back to the community, I thought I'd try my hand at turning this little script into a versatile tool for timescaling several different subtitle formats.
If possible, I would like to receive real-life examples of several different plaintext (no binary formats, thanks) subtitle formats from you guys, both those that DSP supports and those that it doesn't.
For now the tool only shifts entire tracks and works on the command line, but who knows, maybe I'll create a GUI at some point and add the ability to shift specific subtitle clips instead of whole tracks - time permitting, of course.
If you think you might have some juicy subtitles laying around, please reply or contact me directly by e-mail: elamaton (at) nic.fi. Don't worry, I won't redistribute anything you send me, it will only be used as test data.
iMac Core Duo 20" Mac OS X (10.4.7)

Sounds like a very good idea... but have you seen Subtitler:
http://www.versiontracker.com/dyn/moreinfo/macosx/26322
Not to say you won't make a better version, and I'd be delighted if you did! Manipulating subs in DVDSP is not something I do any more - I use an external text editor for any job where more than a few subs are needed.
The problem in DVDSP is that you cannot extract the subs directly, you have to export an track item description which has the subs and time code buried within the XML. You might find that PHP will give you a web based tool to extract the subs and time codes and write a text file, which you can then manipulate.
In fact, wouldn't a web based tool be a good idea? People could upload the track description, it would export the subs and you could get it to adjust the timecodes and write a text file back in the correct format to import back in to DVDSP. Once the subs are in a text file it is a simple matter to manipulate them further...

Script for extracting multiple pages

Hi,
I'm working with the default "extract pages" script: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_A croJS.88.465.html
I want to modify it to extract 2 pages at a time. For example, say I start with a 6-page document. I would like the script to extract pages 1,2 as one document, then pages 3,4 and 5,6.
How would I modify the script to do this?
Thanks!

You could use a loop, but you don't need to for what you want. Do something like:
// Extract first two pages to a new file
extractPages({nStart: 0, nEnd: 1, cPath: "/F/temp/file1.pdf"});
// Extract 3rd and 4th pages
extractPages({nStart: 2, nEnd: 3, cPath: "/F/temp/file2.pdf"});
// Extract fifth and sixth pages
extractPages({nStart: 4, nEnd: 5, cPath: "/F/temp/file3.pdf"});
Obviously, you need to change the file paths.

Script for running multiple find/change queries

Working on a large ID book document (*.indb), I have saved several dozens of Find/Change Queries (named "col01", "col02" etc.) that I run on "All documents". For a particular reason I have to run these queries several times a day.
So I was wondering whether there is, or whether anybody out there would write, a script that runs these queries one after the other. Given the size of the book, it might be necessary to provide for the script to pause after each query is run (before it goes on with the next), but I am just guessing.
Any help is much appreciated!

There are a couple of others:
http://forums.adobe.com/message/5173943#5173943
this is more at code level rather than a GUI, but the actual queries are made using the Find/Change dialog box.
Also
http://www.kahrel.plus.com/indesign/grep_query_manager.html
This is good too, but only does GREP searches (no text, glyph or object find/replaces) that were written by the user - does not use the ones installed with InDesign. Does allow changes by selection, story, document or folder.
Did try the Doquerylist suggested by Kasyan. This allows GREP/text changes by the user/installed with InDesign, but only applies to a selection or text-thread.
Always good to have more than one way of accomplishing a task though!

Is there a script for scaling multiple precomps?

Hi!
Is there a script or another good way to scale tens of precomps in one go?
I just noticed that I need to "grow bounds" to over 20 compositions in order to be able to use an effect on them. Do I need to manually go inside each precomp and change their comp settings for a bigger size or can this be done faster somehow?
I tried the grow bounds effect, but could not get it to work. What I'm doing is simple: I'm blurring the layers to make them "glow" but for the blur to look nice the layers need to have bigger bounds.
Any help will be appreciated!

I used this After Effects Community Help search for 'script scale multiple compositions' and found this:
http://www.aenhancers.com/viewtopic.php?t=701

How do you insert page numbers into a pdf that combines multiple documents?

I need to combine a number of documents into one PDF that then has correct pagination for the whole new document. How do you insert page numbers when combining into one PDF?

Hi,
You can go to Tool panel. Go to Pages. Click on Header& Footer --> Add & Footer from the Add Header and Footer
Regards,
Ajlan Huda.

Script for Linking multiple layers to a null layer

I'm trying to link multiple layers to an animated null layer but I want each layer to start the animation from layer starting time.
What would be the script I need to add instead duplicating null layer for every layers?
I hope that question isn't too confusing to understand lol
TIA
W

Sorry, I'm not good at explaining things though texts lol
Hopefully this picture can explain better what I'm trying to achieve.
I want to link the text layers to ROTATE null object but I want the keyframes to start at the beginning of each of text layer. This way, I won't need keyframes for each text layer and I can adjust the timing easier later. I know the script lines to link them to a null object but I can't figure out the line to tell the keyframes to start at the beginning of the layer instead the null object in the timeline.
I think I just made this more confusing lol

Combining multiple documents into one

I have 4 separate books that I now want to combine into one. The 4 books have around 50 pages each and all books are the exact same format. What is the easiest way to do this? I'm working in CS2 InDesign.
Thanks for you help!
jane

You probably will do best by asking this in the InDesign forum that relates to your operating system.

Sql script for uploading multiple .rdl files in to the reporting server

Hi,
I have multile .rdl files in my local path.i have to upload those .rdl files in to the repoting server single attempt using sql script.
please help me on this issue.
Thanks & Regards,
Muni

I am aware of three different options. RS.exe, Working with the APIs (i.e., CreateCatalogItem) using custom code like C# or PowerShell, or using BIDs.
Here's a good link on the first two items:
http://msdn.microsoft.com/en-us/library/ms159720.aspx
You could also add each report to a BIDs project and deploy that way. I don't think Microsoft will support any other methods, like using a SQL Script.

Script for combining multiple documents?

Similar Messages

Maybe you are looking for