Script for password

Hello
I need help in writing a script that scans the /etc/shadow file for user passwords that expire within
5 days and forces the users to change their password as soon as they login.
The /etc/shadow file has entries like this:
UserX:<password>:12669::90:5:30::
12669 the last time the password was changed--> in # of days since 1970
How can I find todays date in --# days since 1970 ---format so do I can do calculations to determine if a password is about to expire?
thanks in advance!
--SN

perl -e "print int(time/(60*60*24))"

Similar Messages

Copy and paste Java script for password protecting a page?

I need to password protect one page which I want to call my LOGIN page on a site I'm making in Dreamweaver CS5.5. Unfortunately I know that the hosting company I'm using does not have the ability to allow me password a single directory on the server end to accomplish this (I know STRANGE) .... SO
I found some code online - java script that I can just copy and paste into the <head> section of my page. This might be a silly question but is this a 'safe' way to do this? (I don't need anything fancy and the people whom will be accessing this page will all have the SAME password, so I don't need a registration form or anything fancier...)
Any thoughts?

Ugg I totally knew you would all say that (because I already knew that would offer me the easiest solution), change hosts and now I'm embarrassed to say that YES I am paying for the hosting; BUT, I have to explain that I'm with this hosting company because way back when I started that site I needed something super user friendly because I was just learning. Now I have learned more and have started to use Dreamweaver. I just stayed with the same hosting and will use FTP to upload my new more updated site. In the company's defense even though they do offer a way to FTP a site up, their main objective (I think) is to have a really easy way for people to get a site up without knowing anything about code or css or anything; and they operate under the assumption that MOST of their customers will be using their super easy software and not use FTP. That is why I think they are limited to what they offer, at least that is my take on it. My more recent sites do not use this company as I have tried to learn and 'move up'.
Anyway I guess if I don't want to switch hosting I still have the same problem. Is it really that difficult to make something that has just one use ID and password which would be the same thing for every person? Might be a great learning experience for me?
Yep it might be time for me to switch hosting.... sigh. What to do.....

Shell script for password prompt

Hi
I am using Solaris9 and trying to change password of a user with command:
passwd userid
i want password to be given from text file or command line so that password is not prompted on the command line. Is there any way to do this?
I guess i am able to force the carriage return to be entered while entering the password from command line.
This is what I am doing:
passwd userid << EOF
newpassword
newpassword
EOF
But after this, it still gives me New Password prompt. Any help will be appreciated.

You could have a look at 'expect', it can set the password for you..
.7/M.

Script for generate randomize administrator password which make log file to recorded new administrator password with associated computer name on it

Hi
I Need VDS script in order to change domain client local administrator password in my domain ,and put this script in startup script via group policy, but for security purpose I want to randomize local administrator password and log new password
set for each computer on a text file, I want to over write the old password of eachcomputer in log file with new one in order to have the update log file ,my support team some times need administrator password for troubleshooting.
I need a script for generate randomize administrator password which make log file to recorded new administrator password with associated computer name on it and each time new administrator password set it over write the old record on
the log file and update the content of log file automatically.
Regards

Hi
I need a script for generate randomize administrator password which record new password on a log file with associated computer name and each time new administrator password set for a computer it over write the old record
on the log file and update the content of log file automatically.
Regards

Help on preparing shell script for setting the listener password

Hi All,
I am working on checking all my DB servers listeners and if the password is not set for the listener then I need to set the password for that.
As we have many servers, I am planning to prepare the shell script for doing this task.
I am familiar with setting up the listener password manually, but strucked up to prepare the shell script to do the same task.
Can any one kindly help me on this.
Thanks in advance,
Mahi

815537 wrote:
Could any body please help me.
Thanks,
MahiPatience, Grasshopper
This forum is not a chat line, and it is not paid support.
No one is responsible for monitoring it and giving a quick response.
Furthermore, it is a global forum. The person with the information you seek may very well live 20 time zones away from you and was going to bed just as you posted. He will not even see your post for several more hours.
Your original post went up in the middle of the night for half the world.
No one with the information you seek is deliberately withholding it until you sound sufficiently desperate.

Error in shutdown script for bea weblogic

We have this error in the shutdown script of our bea weblogic:
./stopWebLogic.sh[33]: -Xms256m: not found.
using the Oracle OCI database driver
Shutdown initiated
The shutdown sequence has been initiated.the script is as follows:
echo "using the Oracle OCI database driver"
export ORACLE_HOME=/opt/oracle/product/8.1.7
export NLS_LANG=AMERICAN_AMERICA.UTF8
export ORACLE_CLIENT_VERSION=817
export ORACLE_API_VERSION=8
PATH=$PATH:$ORACLE_HOME/bin
SHARED_LIBRARY_PATH=$WEBLOGIC_HOME/lib/hpux11:$WEBLOGIC_HOME/lib/hpux11/oci$ORACLE_CLIENT_VERSION\_$ORACLE_API_VERSION:$ORACLE
_HOME/lib
PATH=$JDK_HOME/bin:$PATH
export PATH
# Set application specific variables
DOMAIN_NAME=eGovStarters
SERVER_NAME=MyServer
WLS_PW=weblogic
# change to domain directory
cd $WEBLOGIC_HOME/config/$DOMAIN_NAME
# Allow other users in group to see created files - i.e. logfiles
umask 027
# Set system classpath initially to contain WebLogic product JARs
CLASSPATH=$WEBLOGIC_HOME:$WEBLOGIC_HOME/lib/weblogic.jar
#!/bin/sh
# Weblogic start script for egovernment
# Based on Colin Brick's initial version
# Modified 02/04/03 - Colin Brick
#       - included settings for Oblix from using SSO Assembly Test as example
# Set General environment variables (Should normally not be changed)
#Java settings
JDK_HOME=/opt/bea/jdk131/
export JDK_HOME
JAVACMD=java
JAVA_OPTIONS=""-server -Xms1024m -Xmx1024m -Xmn320m -XX:SurvivorRatio=8 -Xverbosegc:file=/opt/bea/wlserver6.1/config/eGovStart
ers/logs/gc.log -Dweblogic.system.gc.enabled=false ""
export JAVA_OPTIONS
WEBLOGIC_PORT=51080
#Bea settings
BEA_HOME=/opt/bea
export BEA_HOME
WEBLOGIC_HOME=/opt/bea/wlserver6.1
export WEBLOGIC_HOME
BEA_SECURITY_POLICY=/opt/bea/wlserver6.1/lib/weblogic.policy
export BEA_SECURITY_POLICY
#Oracle settings
echo "using the Oracle OCI database driver"
export ORACLE_HOME=/opt/oracle/product/8.1.7
export NLS_LANG=AMERICAN_AMERICA.UTF8
export ORACLE_CLIENT_VERSION=817
export ORACLE_API_VERSION=8
PATH=$PATH:$ORACLE_HOME/bin
SHARED_LIBRARY_PATH=$WEBLOGIC_HOME/lib/hpux11:$WEBLOGIC_HOME/lib/hpux11/oci$ORACLE_CLIENT_VERSION\_$ORACLE_API_VERSION:$ORACLE
_HOME/lib
PATH=$JDK_HOME/bin:$PATH
export PATH
# Set application specific variables
DOMAIN_NAME=eGovStarters
SERVER_NAME=MyServer
WLS_PW=weblogic
# change to domain directory
cd $WEBLOGIC_HOME/config/$DOMAIN_NAME
# Allow other users in group to see created files - i.e. logfiles
umask 027
# Set system classpath initially to contain WebLogic product JARs
CLASSPATH=$WEBLOGIC_HOME:$WEBLOGIC_HOME/lib/weblogic.jar
domain_NAME=eGovStarters
SERVER_NAME=MyServer
WLS_PW=weblogic
# change to domain directory
cd $WEBLOGIC_HOME/config/$DOMAIN_NAME
# Allow other users in group to see created files - i.e. logfiles
umask 027
# Set system classpath initially to contain WebLogic product JARs
CLASSPATH=$WEBLOGIC_HOME:$WEBLOGIC_HOME/lib/weblogic.jar
#Set the shared library path
if [ -n "$SHLIB_PATH" ]; then
        SHLIB_PATH=$SHLIB_PATH:$SHARED_LIBRARY_PATH
else
        SHLIB_PATH=$SHARED_LIBRARY_PATH
fi
export SHLIB_PATH
# Start weblogic
# change to weblogic home
cd $WEBLOGIC_HOME
PATH=$WL_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:$PATH
$JAVACMD -classpath $CLASSPATH -Dbea.home=$BEA_HOME -Dweblogic.Domain=$DOMAIN_NAME -Dweblogic.Name=MyServer weblogic.Admin -ur
l t3://localhost:$WEBLOGIC_PORT -username system -password $WLS_PW SHUTDOWNIt has obviously something to do with the line
JAVA_OPTIONS=""-server -Xms1024m -Xmx1024m -Xmn320m -XX:SurvivorRatio=8 -Xverbosegc:file=/opt/bea/wlserver6.1/config/eGovStart
ers/logs/gc.log -Dweblogic.system.gc.enabled=false ""I googled for this Xms1024m, Xmx1024m and it turns out to be for memory management for the java virtual machine.
I don't know why it sais it can't find "-Xms256m" since it's not in the script.
Anyone with some experience in this field who can help me out?

./stopWebLogic.sh[33]: -Xms256m: not found.
this can be produced by something like this:
javaoptions="-Xms256m" // or other option too
$javacmd $javaoptions
Now if javacmd has not been set, then $javacmd will be evaluated to the empty string, and the program to look for is the first part in $javaoptions, -Xms256m in our case.

Shell script for telnet

I would like some assistance with writing a simple shell script using the telnet command. I would like to simply execute my script and have it telnet to a device, login and perform commands specific to the equipment.
Once I get past the login I got the rest. I am requesting assistance with establishing the actual telnet session sending the escape character to awake the device, wait for the login, send login, wait for the password send password. etc.. I can then execute the commands needed at this point.
Thank you,
Todd Matherne
[email protected]

Hi,
I've got a script for telnet, maybe you'll try this:
#!/usr/bin/perl
sub connect
use Net::Telnet ();
#testscript for remote login and datatransfair.
print("IP of Router you wannt to connect to: \n");
$ip = <STDIN>;
#gets IP from standardinput.
open(TAB, ">$ip");
$tel = new Net::Telnet(Errmode => "return", Timeout => 20);
#generate telnet object.
$tel->open($ip);
#connect to $ip
$tel->login(Name => "User", Password => "",);
#login
$tel->cmd("more off");
#more off.
@table=$tel->cmd("ip routes");
I Hope you can use this
Cheers
bolligur

Shell script for DB

Hi,
I have written shell script for below scenarios, can you please guide me to write this as correct way, requirment is,
1. i need to connect the database which is on unix server , but before connecting the DB some of the files needs to be removed from \tmp directory.
2. once removed the script need to connect the database and call the sql file which is in \tmp directory.
3. the output files will be stored in \tmp directory start with DB name.
4. finally csv files needs to be transferred to local windows with help of FTP. please find below the script
#!/bin/sh
rm -f /tmp/dbmon/DB1*
CONNSTRING=username/PASSWORD@service
sqlplus -s $CONNSTRING @/tmp/STATS.sql << EOF
EXIT;
EOF
HOST='xxxxx'
USER='xxxxx'
PASSWD='xxxxxx'
FILE='E:\STATS\DB1.*'
cd /tmp/dbmon
ftp -n -v $HOST << EOT
user $USER $PASSWD
prompt
mput $FILE
bye
EOT
EXIT;
EOF
Thanks
Edited by: ASP on Nov 18, 2011 4:45 PM

Hi ASP
It's always a good idea to write entries to timestamped log file without which you will never know where the script went wrong or failed.
This is not tested but just a small example
#!/bin/sh
export LOG_DIR=/tmp/log
export LOGFILE=$LOG_DIR/`basename $0`_${TIMESTAMP}.log
if [ ! -d $LOG_DIR ]
then
mkdir $LOG_DIR
fi
echo "Removing the temporary files from /tmp/dbmon at `date +%Y%m%d_%H:%M:%S`" | tee -a $LOG_FILE
rm -f /tmp/dbmon/DB1*
CONNSTRING=username/PASSWORD@service
echo "Run SQLPlus file" | tee -a $LOG_FILE
sqlplus -s $CONNSTRING @/tmp/STATS.sql << EOF
EXIT;
EOF
echo "Now FTP the files to windows box " | tee -a $LOG_FILE
HOST='xxxxx'
USER='xxxxx'
PASSWD='xxxxxx'
cd /tmp/dbmon
ftp -vn $HOST <<EOF
quote USER $USER
quote PASS $PASSWD
ascii
cd E:\STATS
mput DB1.*
bye
EOF

[SOLVED] advanced shell script for mount and unmount samba share

Good morning guys,
Today I've a very long question....
Hope in your help....:
I usually move from different network.
For one of those I need to mount some share that are under an ActiveDirectory server.
To do that I use samba.
Especially I've made and use the below shell script.
I know that it's so stupid but I'm a very newbie:
#!/bin/sh
echo "This is a custom script for mount my citrix share"
echo "Please insert user password (must a sudoer user)"
echo " "
sudo mount -t cifs -o username='myusername',password='mypassword' //host_ip/TsHome$/myusername /home/myuser/samba_share/TsHOME
sudo mount -t cifs -o username='myusername',password='mypassword' "//host_ip/direction" /home/myuser/samba_share/direction
echo " "
read -p "Press ENTER key to close this terminal"
exit
As I say the script work but it's so crude...!
I want/need to implement it whit the follow addictions:
1. print a feedback on mount: somenthing like "TsHOME is now mounted" or "unable to mount TsHOME"
2. check if the share are already mounted: to prevent accidentally multiple mount. If a share is already mounted I want to print something like "TsHOME is already mounted on /home/myuser/samba_share/TsHOME"
3. ask for share password (now it's in clear on script) - This is optinal
4. un-mount the share before reboot or shutdown command. That because I've notice that If i reboot or shutdown without manually un-mount the share the step of unmounting network file system became very slow
If it's no extremely difficult, can someone help me to write this script?
I know that man exist but I'm not a programmer and it's so difficult for me approch it.
Thank you in advance.
Ale
Last edited by Alexbit (2010-09-23 21:29:13)

Thank you very (VERY) much!
I've follow your information and.. it work!
If can be usefull to other this is the complete script:
#!/bin/sh
echo "This is a custom script for mount citrix share"
echo "****************************************"
echo " "
echo "Please insert domain password:"
read -s mypassword
echo " "
echo "|checking mount state...in share are not mounted mount it!|"
echo "+-------------------------------------------------------------------------+"
if grep "TsHome" /etc/mtab &>/dev/null; then
grep "TsHome" /etc/mtab | awk '{print "TsHome is already mounted on " $2}'
else
sudo mount -t cifs -o username='yourusername',password="$mypassword" //ipaddress/TsHome$ /home/Samba_share/TsHOME && echo "TsHOME is now mounted" || echo "unable to mount TsHOME"
fi
echo " "
if grep "direction" /etc/mtab &>/dev/null; then
grep "direction" /etc/mtab | awk '{print "direction is already mounted on " $2}'
else
sudo mount -t cifs -o username='yourusername',password="$mypassword" '//ipaddress/direction' /home/Samba_share/direction' && echo "direction pat is now mounted" || echo "unable to mount direction"
fi
echo " "
if grep "Area" /etc/mtab &>/dev/null; then
grep "Area" /etc/mtab | awk '{print "Area is already mounted on " $2}'
else
sudo mount -t cifs -o username='yourusername',password="$mypassword" '//ipaddress/Area' /home/Samba_share/Area && echo "Area is now mounted" || echo "unable to mount Area"
fi
echo " "
echo "All DONE!"
echo " "
read -p "Press ENTER key to close this terminal"
exit
I don't really well understand what I've to put in rc.local.shutdown....
I think somethings like:
#!/bin/bash
# /etc/rc.local.shutdown: Local shutdown script.
echo "This is a custom script for UN-mount citrix share"
echo "********************************************"
echo " "
echo "|check mount state: if mount then un-mount!|"
echo "+-------------------------------------------------------+"
echo " "
if grep "TsHome" /etc/mtab &>/dev/null; then
grep "TsHome" /etc/mtab | awk '{print "TsHome is NOT mounted -> going on..." $2}'
else
sudo umount /home/Samba_share/TsHOME && echo "TsHOME is now UN mounted" || echo "unable to UN-mount TsHOME"
fi
echo " "
if grep "direction" /etc/mtab &>/dev/null; then
grep "direction" /etc/mtab | awk '{print "direction is NOT mounted -> going on.." $2}'
else
sudo umount /home/Samba_share/direction && echo "direction is now UN mounted" || echo "unable to UN-mount direction pat"
fi
echo " "
if grep "Area" /etc/mtab &>/dev/null; then
grep "Area" /etc/mtab | awk '{print "Area is NOT mounted - Finished" $2}'
else
sudo umount /home/Samba_share/Area && echo "Area is now UN mounted" || echo "unable to UN-mount Area"
fi
echo " "
echo "going shutdown"
echo " "
sleep 5
I've try but it seems to ignore the IF statement... this is the output when ALL share are UNmounted:
$ sh /etc/rc.local.shutdown
This is a custom script for UN-mount citrix share
|check mount state: if mount then un-mount!|
+-------------------------------------------------------+
umount: /home/Samba_share/TsHOME: not mounted
unable to UN-mount TsHOME
umount: /home/Samba_share/direction: not mounted
unable to UN-mount direction
umount: /home/Samba_share/Area: not mounted
unable to UN-mount Area
going shutdown
Tomorrow I will test again when I'm at office.
Meanwhile can you check if I made a macroscopic mistakes?
Thank you again!
Last edited by Alexbit (2010-09-23 17:34:49)

Script for export in datapump -- help needed !!!

hello all,
i am using the following script as batch file in my database for export
script:
=========
exp name/password file=d:\exp\%date%.dmp full=y log=d:\exp\exp.log an this will replace the first file(monday) on next monday.
similar way i need a script for data pump for full database export using datapump
thanks ,
gold

login to database as a dba and create directory for your dumpfile path.
create directory dpump_dir as 'd:\exp';
and then use the below script for export.
expdp username/password full=y directory=dpump_dir dumpfile=%date%.dmp logfile=exp.log

Recommended solution for password protecting a page for clients only

Hello,
I am using Dreamweaver CS6 on Mac (Mavericks).
I am building a new website for my business and I want to create a page where only my clients can access information after using an id and password that I provide them with. I do not want them to register online, etc. to access the page.
I was instructed to not use Dreamweaver's solution because it is outdated.
Can anyone provide me with advice on how to best do this? Use/Not use Dreamweaver functionality? Recommended extension?
Thanks,
Joshua

OK. If you have 50 to 100 clients and you want all of them to have different passwords, then the solutions recommended so far would be a pain to maintain.
I'm going to give you a solution that is easy to maintain. You will simply add new passwords to the "array" at the top of the script. This is of course not a secure method, but it will work for you. You can edit the design and text, etc. Simply paste all the code into a new file and call it "access.php.
This is not the method I use for password access. I use a method that handles hundreds of thousands of passwords easily, but it's far more complex. . .and secure. But I think this simple method should work for you:
<?php
// All the PHP code is in these first few lines at the top except a few lines that all begin with <?php -- watch out about editing those lines.
// this is where you create the set of passwords. Simply follow the pattern below to add new passwords to the list. Note that the final item does not have a trailing comma:
$passwords = array(
    "client1",
    "anotherclient",
    "lastclient"
?>
<!DOCTYPE HTML>
<html>
<head>
<META HTTP-EQUIV="CACHE-CONTROL" CONTENT="NO-CACHE">
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<META NAME="ROBOTS" CONTENT="NOINDEX, NOFOLLOW">
<title>Reports</title>
<style type="text/css">
fieldset {
border:solid 10px #edebe4;
border-top:20px solid #edebe4;
width:700px;
margin-bottom:10px;
padding:20px;
fieldset legend {
background-color:#edebe4;
color:#468cb7;
padding:0 5px 0 5px ;
font-family: Verdana, Sans-serif;
a {
color:#468cb7;
font-family: Verdana, Sans-serif;
a:hover {
color:red;
li {
font-family: Verdana, Sans-serif;
color:#666666;
font-size:13px;
margin-left:50px;
</style>
</head>
<body class="body_admin">
<div id="admin_wrapper">
<div class="content" style="padding-left:50px;padding-bottom:25px">
<?php if (in_array($_POST['view'], $passwords)){ ?>
<h1>You have access!</h1>
<fieldset><legend>Choices</legend>
<h2>Do the following</h2>
<ul><li><a href='page.html'>A link (you will need to change link url)</li>
<li><a href='page.html'>Another link (you will need to change link url)</li>
</ul>
<p> </p><p>
</fieldset>
<?php } else { ?>
<h2 style='text-align:center'>Enter Password</h2><form action='access.php' method='post'><p style='text-align:center'><input type = 'text' name='view' required style='margin-top:25px'/><br/><input type='submit' name='submit' value='SUBMIT' style='margin:15px'/></p></form>";
<?php } ?>
</div></div>
</body>
</html>

Maven scripts for deploying WAR into Weblogic

Hello Folks,
I would need some help in deploying EAR/WAR into weblogic server.
I already have maven scripts for building but not for deploying. your help is appreciated.
Thanks.

Hi Ank2cool,
Please see my findings, I have tested the Same "build.xml" again...My AdminServer
UserName is weblogic
and
password is weblogic
<project name="webservices-hello_world" default="deploy">
<property name="wls.username" value="weblogic" />
<property name="wls.password" value="weblogic" />
<property name="wls.hostname" value="localhost" />
<property name="wls.port" value="7001" />
<property name="wls.server.name" value="AdminServer" />
<target name="deploy">
<wldeploy action="deploy" name="PlanDemoEAR" source="PlanDemoEAR" user="${wls.username}"
password="${wls.password}1" verbose="true" adminurl="t3://${wls.hostname}:${wls.port}" targets="${wls.server.name}" />
</target>
</project>
Now when i run the AANT task ant deploy
OUTPUT:
Buildfile: build.xml
deploy:
[wldeploy] weblogic.Deployer -verbose -noexit -name PlanDemoEAR -source C:\JavaTest\PlanDemo\PlanDemoEAR -targets Admin
Server -adminurl t3://localhost:7001 -user weblogic -password ******** -deploy
[wldeploy] weblogic.Deployer invoked with options: -verbose -noexit -name PlanDemoEAR -source C:\JavaTest\PlanDemo\Pla
nDemoEAR -targets AdminServer -adminurl t3://localhost:7001 -user weblogic -deploy
[wldeploy] <Dec 21, 2009 2:08:33 PM IST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for app
lication, PlanDemoEAR [archive: C:\JavaTest\PlanDemo\PlanDemoEAR], to AdminServer .>
[wldeploy] Task 1 initiated: [Deployer:149026]deploy application PlanDemoEAR on AdminServer.
[wldeploy] Task 1 completed: [Deployer:149026]deploy application PlanDemoEAR on AdminServer.
[wldeploy] Target state: deploy completed on Server AdminServer
[wldeploy]
[wldeploy] Target Assignments:
[wldeploy] + PlanDemoEAR AdminServer
BUILD SUCCESSFUL
========================TO REPRODUCE YOUR ISSUE I JUST CHANGED THE Password from weblogic to "*weblogic1*" or *"weblogic "* (i added a Single Space at the end of password) in the ANT script....But Server's Actual Password is still "weblogic"=======
OUTPUT:
[wldeploy] Caused by: java.lang.SecurityException: User: weblogic, failed to be authenticated.
[wldeploy] at weblogic.common.internal.RMIBootServiceImpl.authenticate(RMIBootServiceImpl.java:116)
[wldeploy] at weblogic.common.internal.RMIBootServiceImpl_WLSkel.invoke(Unknown Source)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
[wldeploy] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(Unknown Source)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
[wldeploy] at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
[wldeploy] at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
[wldeploy] at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
BUILD FAILED
C:\JavaTest\PlanDemo\build.xml:12: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerExcep
tion: Unable to connect to 't3://localhost:7001': User: weblogic, failed to be authenticated.. Ensure the url represents
a running admin server and that the credentials are correct. If using http protocol, tunneling must be enabled on the admin server.
Total time: 0 seconds
Above is exactly the same error what u are getting...
So please recheck the password provideed in the "build.xml" is correct..or any space added before or after the Password.....
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

Does anyone have access to the Roadrunner dial up script for Mac?

Hello,
I'm getting authentication error when connecting to Roadrunner through their dial up service. I'm told I need a dial up script. The URL they provided leads to a file not found error.
I would also appreciate knowing where I would put this script once I get it.
Thank you in advance,
Mark

There is no dial-up script for RR. There's a dial-up script for the modem you are using, and that's selected in the modem configuration through Network preferences.
Authentication errors occur when the userid and/or password provided for the dial-up account are not correct. They are not caused by the dial-up script itself unless RR uses some sort of non-standard authentication dialog. It's been a long time since I ever used their dial-up, but I don't recall they used a non-standard dialog at the time.
In earlier versions of OS X it was possible to open the dial-up terminal manually so you could observe the remote dialog and enter responses to the dial-in procedure. You could then save the resulting dialog into a login script that would be used once the dial-up connection was made. Unfortunately, I haven't used dial-up in several years, so I'm afraid I'm not much help in this regard. You could do some exploring in Mac Help from the Finder's Help menu to see if you find a help article.

Where to dowload table script for demo table EMPLOYEE

Hello!
I'm reading the book "Oracle PL/SQL Programming, Fourth Edition"
By Steven Feuerstein.
And I can't find the script for the employee table ..
Where can I get it?
Regards
Tobias

Copy this script in notepad and then save in .sql format and then run
rem
rem Header: hr_main.sql 09-jan-01
rem
rem Copyright (c) 2001, Oracle Corporation. All rights reserved.
rem
rem Owner : ahunold
rem
rem NAME
rem hr_main.sql - Main script for HR schema
rem
rem DESCRIPTON
rem HR (Human Resources) is the smallest and most simple one
rem of the Sample Schemas
rem
rem NOTES
rem Run as SYS or SYSTEM
rem
rem MODIFIED (MM/DD/YY)
rem ahunold 08/28/01 - roles
rem ahunold 07/13/01 - NLS Territory
rem ahunold 04/13/01 - parameter 5, notes, spool
rem ahunold 03/29/01 - spool
rem ahunold 03/12/01 - prompts
rem ahunold 03/07/01 - hr_analz.sql
rem ahunold 03/03/01 - HR simplification, REGIONS table
rem ngreenbe 06/01/00 - created
SET ECHO OFF
PROMPT
PROMPT specify password for HR as parameter 1:
DEFINE pass = &1
PROMPT
PROMPT specify default tablespeace for HR as parameter 2:
DEFINE tbs = &2
PROMPT
PROMPT specify temporary tablespace for HR as parameter 3:
DEFINE ttbs = &3
PROMPT
PROMPT specify password for SYS as parameter 4:
DEFINE pass_sys = &4
PROMPT
PROMPT specify log path as parameter 5:
DEFINE log_path = &5
PROMPT
-- The first dot in the spool command below is
-- the SQL*Plus concatenation character
DEFINE spool_file = &log_path.hr_main.log
SPOOL &spool_file
REM =======================================================
REM cleanup section
REM =======================================================
DROP USER hr CASCADE;
REM =======================================================
REM create user
REM three separate commands, so the create user command
REM will succeed regardless of the existence of the
REM DEMO and TEMP tablespaces
REM =======================================================
CREATE USER hr IDENTIFIED BY &pass;
ALTER USER hr DEFAULT TABLESPACE &tbs
QUOTA UNLIMITED ON &tbs;
ALTER USER hr TEMPORARY TABLESPACE &ttbs;
GRANT CONNECT TO hr;
GRANT RESOURCE TO hr;
REM =======================================================
REM grants from sys schema
REM =======================================================
CONNECT sys/&pass_sys AS SYSDBA;
GRANT execute ON sys.dbms_stats TO hr;
REM =======================================================
REM create hr schema objects
REM =======================================================
CONNECT hr/&pass
ALTER SESSION SET NLS_LANGUAGE=American;
ALTER SESSION SET NLS_TERRITORY=America;
-- create tables, sequences and constraint
@?/demo/schema/human_resources/hr_cre
-- populate tables
@?/demo/schema/human_resources/hr_popul
-- create indexes
@?/demo/schema/human_resources/hr_idx
-- create procedural objects
@?/demo/schema/human_resources/hr_code
-- add comments to tables and columns
@?/demo/schema/human_resources/hr_comnt
-- gather schema statistics
@?/demo/schema/human_resources/hr_analz
spool off

Script for password

Similar Messages

Maybe you are looking for