Script form language change

Hi Gurus,
i am copy a stardard form F140_ACC_STAT_01 into ZF140_ACC_STAT_1 this name and after doing same changes i have transported this script through TC scc1 from client 200 to client 300. and then run the program in client 300 then i got following the message.
"Form ZF140_ACC_STAT_1 does not exist in lang. E; correspondence lang.is D".
i Check the form in clint 200 language key is EN and original Language DE.
Now how can i change language in clint 300.
Please give the direction how to rectify this problem.
Best Regards.
Hi,
According to your situation F140_ACC_STAT_01 is copied in to ZF140_ACC_STAT_1.from F140_ACC_STAT_01 conatins only the laguage german it is not contain language 'E' what u have to do is login in language E and copy the same contents and paragraphs and windows in the language 'D' layoutset in to Langauge 'E'.after that change the conversions of the text from german to 'E' after that save check and activate the script.Go to Nace and assign ZF140_ACC_STAT_1 to your output type and also change your control program according to the language it has to pick the correspoing layout.
After doing all the modifications transport the cts to quality client and then production.
Reward points Please,
Regards,
Sunil.

Similar Messages

Getting Error in Adobe Form as Script failed (language is formcalc:context

Hi Experts,
While acessing Adobe forms from MSS ,
After Selecting the Scenario
After Edit Form
Before the form is Displayed
I am getting a POP-UP message stating the following Error.
Script failed (language is formcalc;context is xfa[0].data[0].RequestSeparationEnhanced[0]. PCR_PAGE1[0].PCRheader[0].EmployeeDataCI[0].EmployeeDataCIContent[0].EmployeeInfo[0])
Script=concat($record.ENAME.DATA.FIELD,u201D(u201C,$record.PERNR.DATA.FIELD,u201D)u201D)
Error: acessor u2018$record.ENAME.DATA.FIELDu2019is unknown.
Script failed (language is formcalc;context is xfa[0].data[0].RequestSeparationEnhanced[0].PCR_PAGE1[0].PCR_DE[0].PCRDEContent[0].RequestSeparationEnhanceDDLOverlay[0])
Script=concat($record.MGTXT.DATA.FIELD,u201D(u201C,$record.MASSG.DATA.FIELD,u201D)u201D)
Error: acessor u2018$record.MGTXT.DATA.FIELDu2019is unknown.
ENAME & MGTXT are the fields which has to be displayed by default when the form is shown.
But when the Adobe form is displayed it comes without any Value for ENAME - Employee Name
MGTXT - Reason for Action Text .
Please provide me solution to over come this problem.
Thanking you in advance,
Suriya.

This was fixed by commenting the script in the form since I don't require it.
Suriya

How to change sign negative to positive in sap script form

Hi Guru,
I had wriiten a below piece of code in my sap script form.Now I need all the negative sign to be convert to positive number means
if KOMVD-KWERT = 123,98.00- ,    then require 123,98.00 ..
And for this I know the synatax is
&KOMVD-KWERT(S)& .Bur the probleam is how to manage this (I13) ...Because if i am wriiting
&KOMVD-KWERT(S)(I13)&    getting no value ...Please help..
IF &TNAPR-KSCHL& = 'ZD06'.
&KOMVD-KWERT(I13)&
endif.
Thanks
susri

Hi SUSRIKANT,
You can try this logic .
DATA : LV_KWERT TYPE STRING,
              LV_LEN TYPE I,
             LV_F_KWERT TYPE STRING.
LV_KWERT = KOMVD-KWERT.
LV_LEN = STRLEN( LV_KWERT ).
LV_LEN = LV_LEN - 1.
IF LV_KWERT +LV_LEN(1) = '-'.
LV_F_KWERT = LV_KWERT + 0 (LV_LEN).
ELSE.
LV_F_KWERT = LV_KWERT.
ENDIF.
I hope this logic will be helpful for your issue.
Thanks & Regards,
Kumaran Duraiswamy.

Not able to edit my Sap script form using se71 ?

I have been working on SAP Script say ZKI_FORM using se71 in polish language.
Today When I try to make changes as usual, it is not allowing me to go into change mode . It is giving Error in object Editing like below.
" Changes to Repository or cross-client Customizing are not permitted
Choose 'Display object' or 'Cancel'. "
My functional consultant doesn't know why it is happened like that ? Even my team lead doesn't know this.
COULD ANY BODY PLEASE SUGGEST HOE TO GO TO CHANGE MODE OF THE SCRIPT FORM AND MAKE MY CHANGES ?
THANKS IN ADVANCE .

hi
Give the form name ..
menuiten--> utilities --> convert original language
Step by step for copying form.
give the standard form name in SE71 and language as DE
click create.
popup come... check radibutton copy from original..
given the zformname and green check.
save it and back.
give the zformname again and language DE and click change..
go to menuitem Utilities --> Convert original language
give new language to EN.. green check..
SAve and BACK.
give zformname and language as EN and change..
there u can do all modifications..
Or use SE76 give formname and source language and target language...
then change and press SAVE.
Regards
SAB

Export Billing SAP script forms

Hi All,
I am changing SAP supplied SAP script forms SD_EXPORT_FUCI to ZSD_EXPORT_FUCI.
In it i am trying to change the page windows sizes but unable do it. Can anyone suggest how to do it or can't we change it?
Thanks,
Anuj Saraswat

Hi Anuj,
Did you copy it in a different language and chose the option "Keep in original language'. If yes, then your script might be created in two languages and in order to make changes in the sizes of the windows, tabs etc(except text elements) you would need to make changes in the original language which should be 'DE'.
Please award points if useful.
Thanks
Nidhi

Dunning letter script form translation

Hi!
I am translating dunning script form to chinese language(ZH), original script form is in Enlgish language.
I have selected langage ZH key in the header data of form, but while creating the form in chinese langauge system is giving following error:
Form *ZSOLLECITON01_* language EN should not be translated to ZH
Message no. TD114
The same form name is available in EN language.
I am using transaction code SE71 where I am inserting above form name and langauge key ZH and try to create form?
Can any one explain me how to create above form in ZH language?
regs,
Ramesh

Hi,
Please copy that from.
Goto SE71
Give ur form name and required language click on change
and click ok
It opens the form
In menu options form--->copyfrom
Give your form name and original language
Save and Activate.
It resolves ur problem.
Regards,
Venkat

How to insert the new field to standard scheduling agreement script form.

Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:-   Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of   document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
      document date (field EKPO-AEDAT).
Thanks & Regards
chinnu

open TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT&

How to fill data when call function of sap standard script form?

Hi every experts,
<Priority Normalized>
In our system, when we log in 'FR', we can print purchase order in language Franch,in t_code:ME22N. And when logging in 'EN', we can print it in language English, in ME22N. The English form is just only translated from Franch, with all same structure and frame. The form is done by script form.
And when logging in 'ZH', we create a new program, calling function smartform, instead of translating from EN language. Because of different structure and frame, I don't know the way to write script, so I print puchase order by smartform, when logging in 'ZH'.
But I have a new issue. Our MM module consultant needs me to print Chinese form if one condition, print English form in other condition.
So I have no idea to solve it. Because in my program, I get data to fill smartform and call function of smartform. And I don't know how to get data to fill script form. I only know the function name, 'OPEN_FORM' 'WRITE_FORM' 'CLOSE_FORM'.....
If I only call the several functions, I will get only frame without no data. So who can tell me how to do????
<Urgency downgraded>
Edited by: Suhas Saha on Jul 26, 2011 3:34 PM
Edited by: Vinod Kumar on Jul 26, 2011 4:09 PM

Hi,
Normally if we look in NACE transaction, you can see that upto five different FORMS can be assigned to a single output type . i.e. for each form there will be a seperate routine through which it gets called. But it all start from the first form only.
so you need to write your code in the ENTRY of the first form and if it does not satisfy do not go for processing of it but just exit of that form ENTRY. so that it will take you to next form.
hope this helps.
Thanks,
Venkatesh

Coding at script form side

Hi all,
I see some forms that have code in them...
The syntax is like that:
/:   PERFORM GET_ITEM_PACK IN PROGRAM ZEXPORTSALESFORM
/:   USING &VBDKA-VBELN&
/:   USING &VBDPA-POSNR&
/:   USING &VBDPA-VRKME&
/:   CHANGING &PACKING1&
/:   CHANGING &PACKING2&
/:   CHANGING &KIMYASAL&
/:   ENDPERFORM
What is the logic of writing code inside script forms...
Do we need it really?
Thanks.
Deniz.

Hi Deniz..
We can call subroutines in Script Layout set using this PERFORM command.
This is used to perform any operations from the Layout set. Bcoz we cannot directly write any code in a Script Layout set.
**These are Text symbols for storing some values
/: DEFINE &PACKING1& = ''
/: DEFINE &PACKING2& = ''
/: DEFINE   &KIMYASAL& = ''
**Calling subroutine
/: PERFORM GET_ITEM_PACK IN PROGRAM ZEXPORTSALESFORM
/: USING &VBDKA-VBELN& "Using parameters are like Read-Only in subroutine
/: USING &VBDPA-POSNR&
/: USING &VBDPA-VRKME&
/: CHANGING &PACKING1& "Using parameters can be modified in subroutine
/: CHANGING &PACKING2&
/: CHANGING &KIMYASAL&
/: ENDPERFORM
This subroutine must be defined in the program ZEXPORTSALESFORM
FORM GET_ITEM_PACK TABLES
           INTAB STRUCTURE ITCSY "Contains all USING parameters
           OUTTAB STRUCTURE ITCSY " Contains all CHANGING parameters
**implement the logic here
ENDFORM.
<b>REWARD IF HELPFUL.</b>

Not able to print the script form from print preview

Hi Experts,
I need to print one of the script form from print preview. As per the req. first i need to generate a print preview of this form and if required should be able to print it from this preview.
i am able to generate print preview and also able to see the print option but when i try to print it is going to the spool (which i dont want). I want it to be printed directly to the printer instead of sending it to the spool.
Please suggest me
The way i coded it is
DATA: arcpar TYPE arc_params,
            pripar TYPE pri_params.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      layout                 = 'X_65_132'
      line_count             = 65
      line_size              = 132
    IMPORTING
      out_parameters         = pripar
      out_archive_parameters = arcpar
      valid                  = val
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
pr_options-tddest = ''.
pr_options-tdpreview = 'X'.
pr_options-tdnoprint = ''.
pr_options-tdsuffix1 = 'STUFF'.
pr_options-tdsuffix2 = matnr.
pr_options-tdimmed = ''.
pr_options-tdlifetime = '2'.
pr_options-tdprogram = Form-name.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      dialog   = space
      form     = "purchase or"
      language = sy-langu
      OPTIONS = pr_options
    EXCEPTIONS
      canceled = 01
      device   = 02
      form     = 03
      OPTIONS = 04
      unclosed = 05.
CALL FUNCTION 'START_FORM'.
ENDFORM.                    " open_and_start_form
Thank you.

Hi,
   Just pass the value 'X' to "pr_options-tdimmed" field.Try this.
I hope,it help you
<=<< Sharing Knowledge is a way to Innovative >=>>
By,
Yoga

Perform a form routine within a sap script form

Hi!
How can I
perform a form routine within a sap script form.
Regards
sas

OK,
many thanks for your kindly reply.
But basically there is a matter which I don't understand.
Which way is the better way to loop at internal table:
Solution1:
FORM xxx.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
   DEVICE                           = 'PRINTER'
   FORM                             = 'ZSD_PACKING_LIST'
   LANGUAGE                     = SY-LANGU   .
LOOP AT gt_versand_plan INTO gw_versand_plan.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'SHELEM'
   FUNCTION                       = 'SET'
   TYPE                           = 'BODY'
   WINDOW                         = 'MAIN' .
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'.
ENDFORM.
Solution 2:
Having the LOOP within the sapscript form -> 'ZSD_PACKING_LIST'
Regards
sas

Version Management on SAP Script Forms

Hello,
Is there a version management for SAP Script forms
like what we have in ABAP programs?
I need to revert back the old version of my SAP scrip form like what I used to do in an ordinary ABAP program.
Is this possible?
Need your views on this.
Thank you very much,
Jeffrey A. Prado

Hello Jeffrey,
as far as I know there are just two versions stored in the system, the active one and the one you work on. As long as you do not activate your work, you should be able to track your changes. The other way (which I use) is to save the original version with another name and simply load it back when needed. Since we are working with an old Release I do not how it looks in the "new world".
Greetings,
Sebastian

Problem while creating script form - lang EN is not available in client 800

Hi friends,
I getting a problem while creating a script form in SE71.
if I give the name of the script (zform1) and clicked on create then its giving an information message like " Form ZFORM1 language EN is not available in client 800".
But if I use this form in the abap program its giving stop message "Form ZFORM1 language EN is not active and has no errors" and the control is coming out of the program.
What could be the problem and how to solve it friends . Please help me.
Thanks
-Hima

Hi There,,
By default all the forms will be there in client 100, if you are using the exisiting form and making a Z copy of the same,, then first you will have to copy from the client 100 to 800.
If you are creating the form right from the scratch,, you will that message,,but need now worry about that..
go head and create the Zform, don't forget to activate the form, before calling in the driver program.
In the driver program,, call the function modules to invoke the form and activate the driver program as well. then you are all set/
Thanks-
Rahul

Problem in Script form

Hi,
I make changes in sap script form and after that I want to save with new request but at the time of saving it not asks for new request.
Please any body can explain how to create new request at the time of saving form.

Hi
If the system didn't ask you to create a new request it can mean:
- Your sapscript is just assigned to a request not released yet: in this case you have to release the old request before doing the modification;
U can look for the request by trx SE03:
- Run trx SE03;
- Run the option: Search for objects in a request;
- Insert the object type FORM and the name of your SAPSCRIPT;
- Your sapscript is a local object: in this case you have to assign a development class.
U can assign a new dev class to it by trx SE03:
- Run trx SE03;
- Run the option: Change Object Directory Entries;
- Insert the object type FORM and the name of your SAPSCRIPT;
Max

Renaming SAP script forms

Hi,
1. Can a SAP script form be renamed?
2. How to change the Development class attached to a form?
Thanks.
Pankaj

Use program RSWBO052 for changing the development class of sapscript.
R3TR FORM zname1
Ankur Bhandari
p.s Reward point if it helps.

Script form language change

Similar Messages

Maybe you are looking for