Script Object when rendering to HTML

Hi,
I am developing a form that requires the same script to be reused many times. This form is going to be rendered out to HTML through Workflow, and I'm not sure how to access a script object when rendering to HTML. The root of my form is MISForm so I tried this:
MISForm.variables.getXML.getXMLDoc("http://lcwftest:8080/services/getEmployeeInfo?method=s ynchronousInvoke&empnum="+this.rawValue);
getXML being the script object and getXMLDoc being the function. But this returns MisForm is not defined.
I also tried a reference straight to the object
getXML.getXMLDoc("http://lcwftest:8080/services/getEmployeeInfo?method=synchronousInvoke&e mpnum="+this.rawValue);
but that also returned "is not defined"
How do I reference the script object.

I believe it gets something like
xfa.resolveNode("MISForm").getXML.getXMLDoc...
It also depends on if your script object is located in the root or if it is located within your page if you understand what I am trying to say. With pdf you can have a global script and reference it on each page but with html I would be more than happy if you find a solution on it... you have to have the script object on each page.

Similar Messages

Form design requirements when form should be rendered as HTML and PDF

Hello,
does anyone know if there is a complete documentation on the requirements when I want to design a form that can be rendered as PDF and HTML. I find only bits and pieces here and there. I found a document on which properties are working in HTML forms, however I'm not able to get my script object code working in HTML.
Any help or hints are greatly appreciated!
Regards,
Karin

The LiveCycle Forms documentation includes a document called "Transformation Reference". At least it did in version 7. That document details which properties translate into the various flavours of HTML that are supported. Also, the "Developing Custom Applications" document has a section called "Designing form designs to render as HTML".
Jared Langdon
www.jlangdon.ca

Navigating pages when form rendered as HTML

I successfully created an XDP that my website will render as either PDF or HTML depending on the user's preference.
However, I can only get the first page of the document to display when it is rendered as HTML.
Could anyone help me figure out how to navigate to the other pages?
Thanks

I believe you need a button on your form with a click event set to run at the server. The script should be xfa.host.pageDown() or xfa.host.pageUp().
You'll probably have better luck on the LiveCycle Forms forum.

Script Objects Disappearing when 2 or more XDP's are stitched together

We use Adobe Form Server.
We would like to use Script Objects in our forms. Unfortunately, when we stitch two or more forms together, only the first script objects [contained in the first form] remain. The other script objects [in each additional form] fall off.
The script objects are unique to the form and are named differently (ie. "GlobalFunctions_8190" vs "GlobalFunctions_200878").
How can we correct this? Is it how the Form Server was set up?
Please help.

Just in playing with it, I added an extra ${endif} at the end of the network section and the error went away. Since I only have one network connection, I don't know if it breaks something else or not.

I get this when I close Private Session - "Script: resource://gre/res/hiddenWindow.html:12" What is happening here?

I get a an error when closing Private Session. The screen displays this: Script: resource://gre/res/hiddenWindow.html:12. Then asks if I want a script to stop or continue. Any help out there on this. This is just been recently, the last week maybe.
== This happened ==
Every time Firefox opened

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

[svn:fx-trunk] 11727: You can' t just assume the first shader filter in a maskee object' s filter array is the luminosity shader when rendering a luminosity mask.

Revision: 11727
Author:   [email protected]
Date:     2009-11-12 12:58:37 -0800 (Thu, 12 Nov 2009)
Log Message:
You can't just assume the first shader filter in a maskee object's filter array is the luminosity shader when rendering a luminosity mask. Instead, we now loop through all the filters in the array and search for the luminosity shader.
QE notes: None
Doc notes: None
Bugs: SDK-24180
Reviewer: Ryan
Tests run: FXG runtime, FXG static
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24180
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/GroupBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

EA3/EA2/EA1 - Script output when creating/altering objects

Another picky post :)
I noticed something odd with the script output when altering objects as part of running a script (F5). When running an alter command with more than a two separating characters (ie space, tab or new line) between any of the alter, object type or object name, the object name is not reported in the script output. However, when there is only a single separating character, the object name is reported in the script output. If I have three separating characters between the alter and the object type, the object type isn't reported in the script output either.
For example:
alter view my_view compile;
alter view my_view compile;
alter view my_view compile;
alter view my_view compile;Generates the following in script output:
alter view succeeded.
alter view succeeded.
alter view my_view succeeded.
alter succeeded.When running the first three of these as a statement (F9), the status line shows "alter view Statement Processed". When running the last one, we only get "alter Statement Processed".

Also noticed that there is a similar problem with create statements, for example:
create or replace force view my_view as select * from dual;
create or replace force view my_view as select * from dual;
create or replace force view my_view as select * from dual;
create or replace force view my_view as select * from dual;
create or replace force view my_view as select * from dual;
create or replace view my_view as select * from dual;
create or replace view my_view as select * from dual;
create or replace view my_view as select * from dual;
create or replace view my_view as select * from dual;Generates the following script output:
create or replace force succeeded.
create succeeded.
create or succeeded.
create or replace succeeded.
create or replace force succeeded.
create or replace view succeeded.
create succeeded.
create or succeeded.
create or replace succeeded.Note that in this case the feedback on the status line when running each of these as a statement matches the script output (except succeeded is replaced by Statement Processed).

Cannot get form items with this.resolveNode() in a form rendered as HTML

I refer to the thread http://forums.adobe.com/thread/906775?tstart=270 with a similary problem with a form which rendered as HTML page.
I have built a dynamic form with Designer. The form contains a group with three radio buttons. Each radio button is assigned to a subform container. The first radio button is preselected and the assigned subform is visible. A click to a radio button makes the assigned subform visible and hides the others.
In the PDF preview in works fine.
But when I render the form as HTML page and click into a radio button, I get a "javascript error: 'this.resolveNode('formName') is null or not an Object...". The cause of this error message is known. The script cannot find the subform container named "formName" because it is a DIV-container named like "formName_init_[0]" in the HTML page.
My questions are: What should I do to refer the correct container names?
Is it possible to create such dynamic forms with Designer and render them as HTML form pages?
Thanks to all for an answer.
Greets from Flash Doc

Never mind, found a way...

Using a script object

Hi,
I have beginner skills using LC Designer ES and am trying to insert and use a script object. I found a JavaScript function online: http://home.online.no/~pjacklam/notes/invnorm/impl/misra/normsinv.html and am trying to get it to do some math calculations in a Designer form.
I've uploaded a sample test form at: http://elearningprojects.com/TestFormula1.pdf
Can't get it to work.Trying to run the JS formula in the script object (by clicking on a button), using a few hard-coded variables, and display the results (Dprime1 and Dprime2) in 2 text fields.
I would much appreciate if someone can take a look and suggest how to get it working correctly.
Thanks for your help.
Kind Regards,
saratogacoach

Hi Paul,
Thank you for your reply and suggestions. With beginner skills in LC Designer (I'm a retired social worker), I am not sure how to do this.
Is my identifying the script object path correct?
form1.#subform[0].#variables[0].SO1.function_name(NORMSINV(p));
When you say "You are calling this function a few times in your code so you will have to modify each call." I am not sure how to change this.
I currently have (note that I added the SO1. to the function calls):
var p = totalscore5
var probit1 = SO1.NORMSINV(p)
var p = totalscore6
var probit2 = SO1.NORMSINV(p)
var Dprime1 = probit1-probit2
var p = totalscore8
var probit3 = SO1.NORMSINV(p)
var p = totalscore7
var probit4 = SO1.NORMSINV(p)
var Dprime2 = probit3-probit4
Can you specify what a modified script would look like? I'm stuck.
Also, have I set up displaying the Dprime1 variable's value in the TextField1 correctly?
Thanks very much for your help.
Regards,
saratogacoach

EMERGENCY! All site content disappearing when publishing to HTML

When publishing to HTML, ALL content on the site (inclusive of header nav and footer content) is disappearing. Only the browswer image is visable. http://www.brainstormsuccess.com
I quite Muse. Dumped cache. Rebooted. Have tried creating new layers and copy and pasting content. Nada.
Some are seeing: MuseJSAssert: Error calling selector function: TypeError: Object [object Object] has no method 'toBrowswerWidth'
ISSUE RESOLVED: Truncated line of Java script in the header.

Hi,
The site seems to be working fine on my end. Please refer to the following screenshot :
Please try in a different browser.
Regards,
Aish

XML dataset stucks in rendering on html page

Hi
When i choose a test.xml file with 'insert - spry dataset', 'datatype xml', the datapreview in the 'set data options' window display the data correctly.
In the 'choose insert options' i choose 'insert table'. I don't use the setup button there, leaving it to default settings, and click 'done'.
Seems to be correct.
In the design window, the columnheaders are displayed, with the fields name between brackets, like below:
Datum     Inhoud     Link
{datum}     {inhoud}     {link}
the values are not visible in designview.
But in liveview, the page is completely blank.
I'm not hosting it yet on a testsite. Just trying out how to insert XML data in a HTML file.
According to the tutotials it should work - but it doesn't...
the pieces of code in the html that were automatically added:
    <script src="file:///C|/Users/Frank Buurman/AppData/Roaming/Adobe/Dreamweaver CS4/en_US/Configuration/Temp/Assets/eamA7B0.tmp/xpath.js" type="text/javascript"></script>
        <script src="file:///C|/Users/Frank Buurman/AppData/Roaming/Adobe/Dreamweaver CS4/en_US/Configuration/Temp/Assets/eamA7B0.tmp/SpryData.js" type="text/javascript"></script>
                  </p>
                        <div spry:region="ds1">
                          <table>
                            <tr>
                              <th spry:sort="datum">Datum</th>
                              <th spry:sort="inhoud">Inhoud</th>
                              <th spry:sort="link">Link</th>
                            </tr>
                            <tr spry:repeat="ds1">
                              <td>{datum}</td>
                              <td>{inhoud}</td>
                              <td>{link}</td>
                            </tr>
                          </table>
                  </div>
                        <p> </p>
                </div>
Could you please help me out ?
tnx a lot !

I have no testing server yet.
The hourglas is in Dreamweaver itself, when rendering the xml sprite - not in a browser.
Attached is a testing html (with associated css and js files) in wich i tried to insert the xml.
When i tried the same on a blank html page (in the same dir), the spry table insertion works fine .
But not within the contentarea of this index.html.
Could it be because of the 'accordion.js' ?
Or the css ?
I really have no idea...
tnx
(ps i've left out the images folder)

Mercury Acceleration and display incompatibility problems when rendering

I recently upgrade my monitor to a Dell U2312HM. Since that time I keep receiving the following error message:
"The NVIDIA OpenGL driver detected a problem with the display driver and is unable to continue. The application must close."
"Error code:3"
another error also pops up as well:
"Display driver stopped reponding and has recovered."
"Display driver NVIDIA Windows kernel Mode Driver, Version 306.97 stopped responding and has successfully revovered."
This always occurs when trying to render an export file in Media Encoder and occasionally when rendering from and working on the timeline in PProCS6.
This does NOT appear to happen if I turn off Mercury GPU acceleration.
All drivers have been updated, and all potentially problematic software have been unistalled to see if they are the problem.
I have a nVidia FX 3800 Quadro card running in a Windows 7 64 system with an i7-970 hexacore CPU and 24GB ram. I also use a Wacom 1200WX as a second monitor.
The whole point of having a CUDA card is to accelerate rendering. I love my new monitor, but I have to be able to use my CS6 software.
Any ideas how to fix this?

That appears to have worked. I had to download a different beta driver, but it seems to have done the trick.
http://www.nvidia.com/object/quadro-tesla-win8-win7-winvista-64bit-310.34-beta-driver.html
I'll keep this posted unless it stops working or another glitch shows up.
Thanks again!

How to eliminate empty node space from tree when rendered property is false

Hi
I have created a menu Tree for my ADF BC application while working in JDev 10.1.3.3.
I have tried two methods, first is by creating a menu model as discussed in example in ADF Developers Guide Book Section 19.2.1. Second by creating two view objects and creating the menu tree from my database table.
Depending on the logged in user I want to decide whether to show or not to show a menu tree option to the user. For this purpose I have implemented a function in a managed bean that calls a pl/sql stored procedure to decide if the user has access to a certain component. In first case I have set the rendered property of the menu item to #{menuTree.shown}, where shown is an attribute in the menu model whose value is properly set using java functions that call pl/sql function in turn. In second method, I have also tried to set the rendered property and calling a function that returns true or false based on if the user has access to the menu option.
Problem
When rendered property is returned as false, although the menu option is not displayed but an empty space is displayed in my tree and remaining nodes and/or menu options are displayed with an ugly gap.
How I can remove this unwanted gap, is there a way?
Regards,
Amir
1st option:
My menu tree:
<af:menuTree var="menuTree" value="#{menuModel.model}">
<f:facet name="nodeStamp">
<af:commandMenuItem text="#{menuTree.label}"
action="#{menuTree.getOutcome}"
_rendered="#{menuTree.shown}_"/>
</f:facet>
</af:menuTree>
2nd option:
<af:tree value="#{bindings.MainMenuView.treeModel}" var="node">
<f:facet name="nodeStamp">
<af:switcher facetName="#{node.hierType.name}">
<f:facet name="MainMenuViewNode">
<af:outputText value="#{node.Name}" _rendered="#{userInfo.mainNodeOk}"_ />
</f:facet>
<f:facet name="SubMenuViewNode">
<af:commandLink text="#{node.Name}" _rendered="#{userInfo.mainNodeOk}_">
<af:setActionListener from="#{node.destinationUrl}"
to="#{menuTree.getOutcome}"/>
</af:commandLink>
</f:facet>
</af:switcher>
Edited by: Amir Khan on Jan 12, 2009 8:54 PM

Hi,
if this reproduces in JDeveloper 10.1.3.4 then this sounds like a bug that you should file
Frank

AE CC 2014 Corrupted and Glitched frames when rendering to Quicktime

Ever since upgrading to the newest version of After Effects, I've been getting corrupted and glitched frames when rendering videos with a Quicktime holder. My normal workflow is rendering the video straight out of AE, but it also happens when rendering with Adobe Media Encoder, or even while using the "BG Renderer" script for AE that renders from the terminal. It happens whether I have multiprocessing enabled or not.
The corruption differs depending on what codec I'm using, but in the Cineform Codec it shows up as green frames:
On DNxHD they show up as Red frames (don't have a screencap of this one but you get the idea).
Using the QT Animation Codec they show up as static or distortion:
I have not found a codec that does not become corrupted when encased in the QT holder. Image sequences render out fine, and Cineform with an AVI holder renders out fine.
Even more strangely, I can fix the problem if I link the AE composition to Premiere, then render the QT file out through Premiere itself. The fact that Premiere calls and renders the Comp fine but AE does not, makes me think this is a bug in AE's treatment of Quicktime rather then a driver/system incompatibility on my end. But I'm certainly willing to try any suggestions the community might have for me =]
Specs:
Windows 7 64-bit
AMD Firepro V7800
AMD Phenom II X6 1090T
16 GB RAM
Rendering to a local drive
Fully Updated AE
Latest version of Quicktime

solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOutput Quic…

Scripting error when opening Interactive Form

Hi all,
I'm experimenting with adobe interactive forms (in web dynpro), but things aren't going as expected. I'm getting scripting errors when clicking (in Internet Explorer) on a link that opens a view with an interactive form. Please see below for details.
I've found a similar error description /thread/80059 [original link is broken], but the context is different. It seems to be related to namespaces, but I have no idea what I'm doing wrong.
Any help is greatly appreciated!
line 59: 'sapUrDomainRelaxing' is undefined
line 109: Object expected
line 113: Object expected
line 137: 'SSR' is undefined
line59
ur_system = {<<SNIP>>, domainrelaxing: sapUrDomainRelaxing.MINIMAL, <<SNIP>>};
line 109
sapUrMapi_init();
line 113
sapUrMapi_Focus_RegisterCreate('');
if( SSR && SSR.windowManager) SSR.windowManager.hideEventBlocker();
sapUrMapi_initLinkStatus();
line 137
if (SSR.showInfo){ <<SNIP>> }

Hello Jeroen and welcome to the SDN!
It seems like an error in the WebDynpro-part, not in the Adobe forms-part. Please check if all your elements (views, windows, controllers, etc.) are in valid namespaces.
Could you try to create an application for the WebDynpro-project in the NDS, and try to <i>deploy new archive and run </i>? Does this work?
Perhaps you could even copy the project, and replace the Adobe Inter Form element by a static text, to test if it is in the WebDynpro part or that it really has something to do with the Adobe.
Good luck,
Jan-Willem Kaagman

Script Object when rendering to HTML

Similar Messages

Maybe you are looking for