Scroll front panel left and right using control
I am taking an input from a chair rotation sensor (that just returns a voltage). I want to use this value to operate a control that scrolls the front panel left and right. Effectivively, the user would be able to navigate a wide control panel just using his chair.
So to summarise:
Does anyone know of a way to control the left and right scrolling motion of the front panel using a control?
Use the VI property "FP.Origin" to set the position of the panel in the window. To move the window position, use "FP.Winbounds".
LabVIEW, C'est LabVIEW
Similar Messages
-
Can i turn down front left and right using ddts decoder with the g500
hi want to get ddts 100 decoder for my gigaworks g500.when im watching a move i have to have it up on about 2.7 bars.to hear the center speaker then the action is to louad.i can turn down center and rear and sub but no front left and right.can you turn down front left and right using the decoder.do you still have to use the controll pod for the gigaworks if i had the decoder in or do u use the decoder to turn it up thanks plz help.
System Preference > Accessibility
Select Mouse & Trackpad in the left side box.
Double-click speed
Make it slower by dragging the pointer to the left.
Best. -
Flash cs3: how to make moving/scrolling photo menu left and right?
http://media.moma.org/subsites/2008/miro/flashsite/index.html
- click continue, then relative size link
How can I do this with lash cs3: how to make moving/scrolling
photo menu left and right?
When you move left and right and paintings move. and when you
click on a painting, you see the the title and it links to another
page on the site.scene_mc start at x = -550... x wide is 2164 px
now I have this and its working...
navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
function navL_Over(e:MouseEvent){
if(scena_mc.x == 0){
scena_mc.x == 0;
else if(scena_mc.x <= -10){
scena_mc.x += 10;
navL_mc.addEventListener(Event.ENTER_FRAME, runL);
function runL(e:Event):void{
if(scena_mc.x == 0){
scena_mc.x == 0;
else if(scena_mc.x <= -10){
scena_mc.x += 10;
function navL_Out(e:MouseEvent){
navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
function navR_Over(e:MouseEvent){
if(scena_mc.x == -1164){
scena_mc.x == -1164;
else if(scena_mc.x >= -1154){
scena_mc.x -= 10;
navR_mc.addEventListener(Event.ENTER_FRAME, runR);
function runR(e:Event):void{
if(scena_mc.x == -1164){
scena_mc.x == -1164;
else if(scena_mc.x >= -1154){
scena_mc.x -= 10;
function navR_Out(e:MouseEvent){
navR_mc.removeEventListener(Event.ENTER_FRAME, runR); -
How to create buttons that control left and right scroll?
I would like to know if there is a way to create two buttons, each on the left and right hand sides of the screen, that would control the horizontal (x-axis) scroll of my website. I've built two image buttons that link to anchors located on the left and righthand edges of the page, but this does not achieve the funtionality I'm looking for. I would like each button to scroll incrementally every time it is pressed.
Is this possible in Muse?There are no facing pages in Pages 5.
Peter -
Controlling a projector (presentation) using left and right arrow keys
Hello i have a cdr-rom im producing, im creating an
interactive presentation and i would like the user to be able to
move from page to page using the left and right arrow keys on the
keyboard how (1) do you add the script ie, on the timeline etc (2)
what is the exact script i need to use. Im fairly new to director
so could you please make it as easy as possible to understand. Any
help would be great thank you.You want to create a keyDown script in a movie script window.
You can get the keycodes for the arrow keys here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15887
Do a search in the Lingo forum for more info on writing a
keydown script. There are many examples to choose from. -
We are trying to use an ipad to replace ordinary paper sheet music on a piano. When truning ordinary paper pages, it is sometimes hard to grasp one page, turn it quickly and get it to stay turned. The idea with using an ipad is that a tap turns the page, it stays turned. However,,,,,ordinary sheet music is on both left and right pages. With one turn you get 2 new pages. The ipad, being smaller results in only one page and therefore twice as many page turn taps; more taps equals less hands on the piano. If we could tie 2 ipads together and get them both to turn the page simultaneously it would be nice. We are trying to get used to using the ipad. We are using ForScore app to get sheet music into the ipad; we could load one with odd pages and one with even pages. Maybe this is getting too complicated.
Anyway to tie 2 units together
JohnNo way to control one device from the other. But, according to ForScore, you should be able to display two sheets side by side in landscape mode (2-up view)? Not sure if that helps as it must make the actual print smaller to do so.
http://www.forscoreapp.com/about/#interface -
Shift+scroll no longer scrolls left and right!!
I have a logitech mouse w/ a scroll wheel
I have always been able to hold down shift to get the scroll wheel to scroll left and right instead of up and down
and it's suddenly stopped working and I have no idea why
can anyone help?I THINK this is related to installation of a new logitech bluetooth mouse driver
that stinks. a logitech driver should only control the logitech mouse. it shouldn't affect how other mice work with the OS -
What is required to use the video composite out on the iPhone 4 The left and right audio works ok
Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES
-
I can't scroll left to right using my mouse wheel. any suggestions?
I can't scroll left to right using my mouse wheel. any suggestions?
It is possible in InDesign CS6, and frankly I would prefer it to the panning which I have used and is just not quite as convenient for what i am doing. I am scrolling through multiple pages not within a single page. it would just be nice to have the same functions in an "upgraded" version.
-
I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?
Your TV hasn't entered some odd picture in picture mode has it with two 'inputs' side by side?
AC -
HT1338 My new magic mouse will not one finger scroll left and right
I am up to date with software but after connecting my new magic mouse it will not one finger scroll left and right. It does scroll up and down. Any ideas on what may be wrong??
I don't have a Magic Mouse, but there is probably a setting that enables and disables horizontal scrolling. Look on System Preferences Mouse pane.
-
How do i get to see websites on full screen so i dont need to keep scrolling left and right?
before i could see the whole width of a webpage without scrolling left and right but now everything is bigger and i cant see the whole page without scrolling.
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages -
I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?
All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.' -
[Edit: It should be FF 3.5. I mistyped FF 3.15]
I have MAC OSX Snow Leopard. 10.6.8.
FF 3.5 [apologies; I mistyped 3.15] worked perfect with Snow Leopard. NO problems.
But '''everything''' after that, till FF 8, crashes left and right.
Facebook crashes the most within few short seconds.
And NO different language websites even open.
I read online to use Safe Mode and try. I did. No change.
I read online to reset font cache or or something using atsUtil from the Terminal. I did. Nothing.
It is super frustrating. Same problem in my wife's Mac as well.
Should I stop using FF? I heard Chrome is good.
Try any of these news paper sites:
www.prothom-alo.com
www.dailyjanakantha.com
www.Facebook.com
Even ESPN videos quit randomly. But YouTube videos are fine!
Potheek Aami.All your add-ons and plugins are up to date?
There has been a recent bug with Apples Java update:
https://bugzilla.mozilla.org/show_bug.cgi?id=700835
I have similar issues, although most of the time the browser only freezes for a short time. -
Installed CC trial and opened LR, panels on left and right not appearing. keep getting an error message "an error occured while attempting to change modules" plus no import/export options.
Error changing modules | Lightroom
Mylenium
Maybe you are looking for
-
Hello all, The raw file import of LR for MacOs V5.7 is not working => error "can't import ...." In the the internet forums is advised that this is fixed with LR V5.7.1 which should be available since December. But my updater always says I have the ne
-
BPM Integration with Java webdynpro
Hi All, I am new in BPM forum . I want to integrate one JWD DC to anather JWD (Java webdynpro) so i need to pass one value to anather Dc using BPM . My Scenario is.. I want to pass one unique value from one component (person who is created the
-
Sneak Peek: The future of Visual Graphics
For those who don't have the oppurtunity to attend the Siggraph conference in Vancouver this year, you may be interested in viewing some of the live streaming events available. Tomorrow at 11:30 PDT, Steve Forde, Senior Product Manager, Visual Effect
-
I just started to have this problem lately. I have tried Apple support via iChat regarding MobileMe but so far...no luck. The problem is that I cannot publish new pictures to an existing published album. I get the following error message in iPhoto
-
Please help