Search Configuration XML import using SharePoint App

I'm trying to import a search configuration XML using a SharePoint App.
I have check the following:
 - The XML is correct. I can upload it manually.
 - The code works using a console app, but not using the SharePoint app.
Following code:
SearchConfigurationPortability searchConfig = new SearchConfigurationPortability(this.Context);
SearchObjectOwner owner = new SearchObjectOwner(this.Context, SearchObjectLevel.SPWeb);
searchConfig.ImportSearchConfiguration(owner, configurationLocation);
this.Context.Load(searchConfig);
this.Context.ExecuteQuery();
Following error message:
    ServerException was caught
    The server was unable to process the request due to an internal error.
    For more information about the error, either turn on IncludeExceptionDetailInFaults
    (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
    on the server in order to send the exception information back to the client, or turn on
    tracing as per the Microsoft .NET Framework SDK documentation and inspect the server
    trace logs.
Thanks!

I'm deploying the app to a SharePoint dev environment in the cloud so I can't see the ULS Logs, unfortunately. The link you suggested states that "managed properties aren’t supported in this deployment model" and this is exactly what I'm trying to provision.
Any other ideas why the above code fails, although stated exactly on http://msdn.microsoft.com/en-us/library/office/dn205276(v=office.15).aspx?

Similar Messages

  • The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

    All,
    I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
    configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
    error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
    tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
    As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
    http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
    when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
    This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
    to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
    trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
    groups for different applications, just as I'm trying here with Office 2013.
    Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
    and publish all applications within a package to a user regardless of whether they are in the correct group or not?
    The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
    Thanks

    Nicke,
    The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
    No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
    http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
    2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
    I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
    on the machine when delivered?
    <Configuration>
      <Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
        <Product ID="ProPlusVolume">
          <Language ID="en-us" />
    <ExcludeApp ID="Access" />
    <ExcludeApp ID="InfoPath" />
        </Product>
      </Add>
    </Configuration>
    3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
    through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
    I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
    http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
    rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
    Dan,
    Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
     From what I’ve read / watched  I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
    them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
    (I think).
    The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
    users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
    However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
    suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
    to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
    Is my understanding above correct or have I missed some options / methods?
    If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
    this use case is the AppV method one which will be unsuitable?
    Thanks

  • Searching for XML tags using Oracle Text

    I am using full text search to find documents based on a search text. It works fine for pdf, word documents, etc. However for XML documents, searching for a particular tag name does not find anything. Searching for text within tags works fine. Any thoughts?
    Edited by: miyer on Feb 21, 2011 6:25 PM

    Hi
    Try adding the following variable to ucm config.cfg and then see if a new xml checkin returns the result for FT search :
    TextIndexerFilterFormats=xml
    Save the file , restart UCM and then test .
    If the new checkin gets the results as expected then execute Collection Rebuild cycle to have the existing contents as well FT indexed to be searchable (for XML).
    Thanks
    Srinath

  • How to style text with XML import using character style that is in a group (aid:cstyle = "group1"."style1") ?

    Hello, I am using an XML file to import text into InDesign page items. Everything works well using the attribute "aid:cstyle = style1" but since the introduction of InDesign groups, our users want to use them but we do not know how to reference them in the xml attribute.
    I saw somewhere on the internet that you should use "aid:cstyle = group1:style1" or "aid:cstyle = group1|style1" but both won't work. They simply create a new ungrouped style name "group1:style1" or "group1|style1"
    So what is the right formula ?
    Thanks

    Tagged Text is nice but all the copy in your page item is one big block, no way to separate and track individual values, say in your page item you have a description and a sale price, you can't update the price without reimporting the description as well. We use many fields inside an individual page item and just as one example we need to be able to update all prices on the page without modifying anything else that shares the page items with the prices. Also XML updates you can trigger an update for the whole document in one operation, while with Tagged Text you have to "place" your text file for each individual page item you are modifying (even with scripting you call the place function as many times as you have page items). So say you have a page or document with 200 boxes across multiple layers that is a lot of individual actions.
    Anyway back to my problem.
    I've never used Mapping tas to styles before, but running some tests here I clearly don't understand it. If my text is already tagged and I map a style to a tag, it untags all my individual text elements and leaves only the page item tag, and doesn't style my text... I'm going to try and read more on this.

  • How to migrate search configuration and db from SharePoint 2007 to SharePoint 2010

    hi all
    currently we have a plan to migrate sharepoint 2007 farm to sharepoint 2010 with sp2 version. we have used the ssp, and only the search function.
    Now the search db is quite big.
    we have to use the database attach way to do migraion, because the old system must be online in 24 hours per day.
    what i want to know is can we migrate the search db directly instead of recreate content source and reconfigure the search and do full crawl?
    thanks.

    Hi,
    Below links should help you
    http://technet.microsoft.com/en-us/library/gg593614(v=office.14).aspx
    http://msdn.microsoft.com/en-us/library/office/ff828776(v=office.14).aspx
    http://www.orcsweb.com/blog/cory-granata/sharepoint2k7-to-2k10-migration-using-db-attach-method/
    http://technet.microsoft.com/en-us/library/cc263403.aspx
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • SharePoint Foundation 2013 - Search Configuration Issue - 2 App Servers and 2 Front-End Servers

    Hi, 
    We have a SharePoint Foundation 2013 with SP1 Environment. 
    In that, we have 2 Front-End Servers and 2 App Servers. In the Front-End Servers, the Search Service is stopped and is in Disabled state and in the 2 App Servers in One App Server, Search is Online and in another Search is Starting but goes to Stopped sooon
    after.
    Originally, we had only 1 App Server and we were running our Search Service and Search Service Application in that. Now since the index location became full and we were unable to increase the drive there, we added one more App Server and now the issue is
    Search is not properly getting configured in either of these App servers. What we want to do is run Search only in the new App Server, because we have a lot of storage space for Index locations here, but in the older App Server, not run Search at all.  We
    tried keeping the Search Service disabled and ran the below PowerShell Scripts, but none of the ones are working. These scripts are creating the Search Service Application, but the error of "Admin Component is not Online", "Could not connect
    to the machine hosting SharePoint 2013 admin component" is coming up. 
    http://www.funwithsharepoint.com/provision-search-for-sharepoint-foundation-2013-using-powershell-with-clean-db-names/
    http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
    http://blog.ciaops.com/2012/12/search-service-on-foundation-2013.html
    Can I get some help please?
    Karthick S

    Hi Karthick,
    For your issue, could you provide the
    detail error message of ULS log  to determine the exact cause of the error?
    For SharePoint 2013, by default, ULS log is at      
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
    For troubleshooting your issue,  you can try to run the SharePoint Products Configuration Wizard on your WFE servers and run the script for configuring the search service on SharePoint
    Foundation:
    [string]$farmAcct = "DOMAIN\service_Account"
    [string]$serviceAppName = "Search Service Application"
    Function WriteLine
    Write-Host -ForegroundColor White "--------------------------------------------------------------"
    Function ActivateAndConfigureSearchService
    Try
    # Based on this script : http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
    Write-Host -ForegroundColor White " --> Configure the SharePoint Foundation Search Service -", $env:computername
    Start-SPEnterpriseSearchServiceInstance $env:computername
    Start-SPEnterpriseSearchQueryAndSiteSettingsServiceInstance $env:computername
    $appPool = Get-SPManagedAccount -Identity $farmAcct
    New-SPServiceApplicationPool -Name SeachApplication_AppPool -Account $appPool -Verbose
    $saAppPool = Get-SPServiceApplicationPool -Identity SeachApplication_AppPool
    $svcPool = $saAppPool
    $adminPool = $saAppPool
    $searchServiceInstance = Get-SPEnterpriseSearchServiceInstance $env:computername
    $searchService = $searchServiceInstance.Service
    $bindings = @("InvokeMethod", "NonPublic", "Instance")
    $types = @([string],
    [Type],
    [Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool],
    [Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool])
    $values = @($serviceAppName,
    [Microsoft.Office.Server.Search.Administration.SearchServiceApplication],
    [Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$svcPool,
    [Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$adminPool)
    $methodInfo = $searchService.GetType().GetMethod("CreateApplicationWithDefaultTopology", $bindings, $null, $types, $null)
    $searchServiceApp = $methodInfo.Invoke($searchService, $values)
    $searchProxy = New-SPEnterpriseSearchServiceApplicationProxy -Name "$serviceAppName - Proxy" -SearchApplication $searchServiceApp
    $searchServiceApp.Provision()
    catch [system.exception]
    Write-Host -ForegroundColor Yellow " ->> Activate And Configure Search Service caught a system exception"
    Write-Host -ForegroundColor Red "Exception Message:", $_.Exception.ToString()
    finally
    WriteLine
    ActivateAndConfigureSearchService
    Reference:
    https://sharepointpsscripts.codeplex.com/releases/view/112556
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected].
    Eric Tao
    TechNet Community Support

  • SharePoint 2013 profile service account requirements when using "Use SharePoint Active Directory Import" option

    Hi All,
    I am trying to configure SharePoint Profile service. We would like a straightforward profile import from Active Directory.
    On the "Configure Synchronization Settings" page, we have chosen the option "Use SharePoint Active Directory Import" option.
    We have created a connection to the Active Directory using Configure Synchronization Connections page. We have specified the account that would be used for the import process.
    Question:
    I would like to confirm whether the account configured for the profile import need any special privileges when using "Use SharePoint Active Directory Import" option ?
    Thanks,
    Saurabh

    Grant Replicate Directory Changes permission on a domain
    To do this please follows below procedure
    On the domain controller, click Start, click Administrative Tools, and then click Active Directory Users and Computers.
    In Active Directory Users and Computers, right-click the domain, and then click Delegate Control.
    On the first page of the Delegation of Control Wizard, click Next.
    On the Users or Groups page, click Add.
    Type the name of the synchronization account, and then click OK.
    Click Next.
    On the Tasks to Delegate page, select Create a custom task to delegate, and then click Next.
    On the Active Directory Object Type page, select This folder, existing objects in this folder, and creation of new objects in this folder, and then clickNext.
    On the Permissions page, in the Permissions box, select Replicating Directory Changes (select Replicate Directory Changes on
    Windows Server 2003), and then click Next.
    Click Finish.
    Thanks & Regards
    ShivaPrasad Pola
    SharePoint Developer 

  • APP-V Office 2013 configuration.xml

    Hi all, 
    I'm trying to roll out Office 2013 with APP-V, whenever I change the config.xml to accept the EULA it still pops up with the EULA.
    The documentation for APP-V differs from the normal ODT config.xml, what's the difference and am I missing out on something? 
    See the document from Microsoft on the configuration.xml within app-v: 
    https://technet.microsoft.com/en-us/library/jj219426.aspx
    The XML file states to accept the EULA. The output in there is a configuration.xml like this: 
    <Configuration>
      <Add SourcePath="C:\office2013" OfficeClientEdition="32" >
        <Product ID="O365ProPlusRetail">
          <Language ID="nl-nl" />
    <Language ID="en-us" />
        </Product>
    <Product ID="ProjectProRetail">
          <Language ID="nl-nl" />
    <Language ID="en-us" />
        </Product>
     <Product ID="VisioProRetail" >
          <Language ID="nl-nl" />
    <Language ID="en-us" />
        </Product>
      </Add>
    <Display Level="None" AcceptEULA="TRUE" />
    <Property Name="SharedComputerLicensing" Value="1" />
    </Configuration>
    Kind regards, 
    Jacob van Rooijen

    You can use two registry keys to disable it, push them using a GPO:
    HKCU\Software\Policies\Microsoft\Office\15.0\Registration
    Reg_DWORD = "AcceptAllEulas"= 1
    HKCU\software\policies\microsoft\office\15.0\firstrun
    Reg_DWORD = "bootedrtm" = 1
    See this post

  • I have set up our school ipads to be supervised by Apple Configurator and am using VPP to buy apps.  I now find the supervised ipads do not allow the pupils to download photos or movies etc. Any suggestions would be great please.

    I have set up our school ipads to be supervised by Apple Configurator and am using VPP to buy apps. I did this initially as our school internet connection was stopping us from being able to update the IOS and our County was offering a managed system, Lightspeed, which took control of every device in school which proved very expensive.  I now find the supervised ipads do not allow the pupils to download photos or movies etc. As we frequently use the ipads as cameras this is causing us a problem. We have a school imac that I use to keep the devices updated with Apple Configurator (not connected to our network), and this doesn't seem to offer any solution to download them either.  I was told there was a setting in Apple Configurator to allow other computers to download from supervised devices, but I can't see it anywhere.  I am very new to this so any advice or help would be greatly appreciated please.

    I assume you are wanting to take the photos and movies off the iPads?
    Connect the iPad to a Apple computer. Open "Image Capture". Any photos or video can me imported to the desktop or other location on your computer.
    I had this same problem last year and as we have no wifi I asked lots of people at Apple what I could do - no one provided this answer (a little unbelievable!). If you have wifi using something like dropbox would be an easier solution.
    Hope this helps

  • Using SharePoint OOTB search with external DB

    Hi All,
    I am using SharePoint OOTB search to search for documents inside a document library. The document library has all the data except for two cases:
    1- Value stored in SharePoint document library as ID but the actual name is in an external DB (example: Document 100 has an organization code 7200, the list of all organizations is in an external DB)
    2- A look-up that exists in another SharePoint list with IDs only (example: a document 100 can belong to project 55, 66, 77). DocProject list that describes the 1:M relation is in the SharePoint list, however the project information for project 55, 66, and
    77 are in an external DB.
    When the user tries to search for a document by project or organization name, an external database should be involved to get the correct documents that fall under the search criteria.
    Can you please advice me on how can this be implemented? What are the options that I have?
    Many thanks

    Hi Ashish,
    Thanks a lot for the prompt reply and wish you a pleasant year.
    Unfortunately this scenario is not working in our case!
    In fact we have no problem at all if we added a new field to a list and configured it as a lookup field to an existing SharePoint list and then migrated its data and started to search by lookup name instead of ID.
    Our problem still exists as we fail to repeat the same scenario with a list that exists in an external database and was shown in SharePoint using Business Data Catalog. Whenever the lookup list is an external DB list, we can not use the name instead of the
    ID in search (even after we migrate the data, mark the field as a lookup field, and run full crawler)
    We also searched the re-index feature but found that it is a feature in SharePoint 2013 while our version is SharePoint 2010.
    Kindly advice as I am afraid we are missing a step or a certain configuration that makes SharePoint behavior different with BDC lists. Here are the detailed steps that I followed:
    1- From Central Admin, Add BDC service to SahrePoint
    2- Create a .net solution (SharePoint features BDC) that uses a web service that calls an Oracle stored procedure to get the data (full list) or (single Item) and maps them to BDC.readlist and BDC.readitem
    3-Deploy the custom BDC solution to SharePoint
    4- From SharePoint designer, create external content type that uses the custom BDC solution
    5- In the created external content type, added two operations (New Read Item Operation) and (New Read list operation).
    6- Create external list from the external content type
    7- Add new column to the original list as a look up column with the property (Get Information from) set to the external list
    8- Migrate data to the newly added column using SharePoint object model
    9- Run full crawler job
    10- Try the search, when searching by ID we get results, when searching by name, we get NO results!
    Many thanks,

  • Configuring SharePoint Apps in Production Environment

    SharePoint 2013 Environment. We are trying to configure SharePoint APPS in production environment. It is a medium server farm with two W.F.E's load balanced. 
    We have the following two DNS entires with two different wildcards pointing to the SharePoint FQDN. 
    contoso.com 
    contosoapps.com
    Since we are planning to use https, In the DNS we have assigned a random ip address to just the apps domain. Created a new web application with no host header and assigned this IPAddress to this web application by changing the binding (for both http and
    https) on both the servers.
    When I click on the app, the redirect does not work and displays page not found error. Any help?
    V

    You said you created a new web app with no host header.  Did you also create a root level site collection in the web app?  You don't actually use the site collection but it needs to be there.  Also make sure that https is the default zone
    on that web app.  Apps normally only use the default zone for redirecting to the address and if you are using https it won't work unless that is the default zone.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Importing B2B configuration xml

    Hi,
    Is there another way to import B2B Configuration xml. I was able to import using B2B UI(Administration tab - import).
    I would like know whether import can be done thro' database. If possible please provide me steps.
    Thanks in advance.

    Hello Ramesh,
    Any design configuration of B2B can only be imported through UI/Command line utility. Deployment API is also exposed and the details of which can be found here.
    http://www.b2bgurus.com/2008/04/deployment-in-oracle-b2b.html
    There is no other way except the deployment process (API/UI) to get the configuration data into the deployed/runtime area.
    Rgds,Ramesh

  • How to log to a file using the log-configuration.xml?

    Hello *,
    I created following log-configuration.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE log-configuration SYSTEM "log-configuration.dtd">
    <log-configuration>
         <log-formatters>
              <log-formatter name="DefaultFormatter" pattern="%25d %-60l %s: %m" type="TraceFormatter"/>
         </log-formatters>
         <log-destinations>
              <log-destination count="10" effective-severity="ALL" limit="1000000" name="DefaultDestination" pattern="FDLB_GUI.%g.trc" type="FileLog">
                   <formatter-ref name="DefaultFormatter"/>
              </log-destination>
         </log-destinations>
         <log-controllers>
              <log-controller effective-severity="ALL" maximum-severity="FATAL" minimum-severity="DEBUG" name="DefaultController">
                   <associated-destinations>
                        <destination-ref association-type="LOG" name="DefaultDestination"/>
                   </associated-destinations>
              </log-controller>
         </log-controllers>
    </log-configuration>
    From a Web Dynpro view I want to use the log-controller. I'm using the default logger:
    Logging location.
      private static final com.sap.tc.logging.Location logger =
        com.sap.tc.logging.Location.getLocation(EinstiegView.class);
    In the wdInit method I want to log a simple message:
      public void wdDoInit()
        //@@begin wdDoInit()
        logger.setEffectiveSeverity(com.sap.tc.logging.Severity.ALL);
        logger.fatalT("test logging to new file logger");
        //@@end wdDoInit()
    I see the message in the defaultTrace.0.log, but my own log file doesn't appear.
    How to address the log-controller of my log-configuration.xml?
    Thanks in advance,
    Jürgen Dufner

    Hi,
    I guess the follwing part of your log-configuration is wrong:
    <log-controller
    effective-severity="ALL"
    maximum-severity="FATAL" m
    nimum-severity="DEBUG"
    name="DefaultController">
    Try to change in log-configuration the value for name in <log-controller> to the start sequence of the packages to be logged. E.g., all our packages should start with com.yourcompanyname.projectname
    To log all messages from classes in these packages make the name = com.yourcompanyname.projectname.
    Hope that helps,
    Regards, Astrid
    Therefore I list

  • Enterprise Search using Sharepoint Server 2007 + SAP R/3

    Hi experts,
    I want to achieve an enterprise search using SharePoint Server 2007 (MOSS).
    SharePoint includes the BDC (business data catalog) which allows you to communicate with the SAP System.
    I read in the Microsoft whitepapers that thereu2019s a need for a web application server 6.40.
    So here is the problem:
    We have SAP R/3 Enterprise 4.7 with WAS 6.20. We donu2019t want to change or upgrade the SAP system.
    There are ways to connect the WAS to the R/3 system e.g. RFC.
    But does this still work for search in SharePoint?
    Did anybody already deal with this problem?
    Any other ideas connecting SharePoint to SAP in this scenario?
    Best regards
    Philipp Detemple

    > and having requirement to upgrade OS version from B.11 to B.23. Currently server is hosting SAP R/3 Enterprise version.
    So you upgrade HP-UX 11.11 to HP-UX 11.23?
    > I have tried to serach SAP service market place for PAM, but could not find specific information on version upgrade from B.11 to B.23
    Yes - because there is no HP-UX 23.x, only 11.23 and 11.31. For the version overview check
    Note 939891 - HP-UX: End of Support Dates
    Note 1075118 - SAP on HP-UX: FAQ
    > My Questioin is: If we copy system as it is to new host and if we keep the same Kernel Patch 196, will it work fine or give issue?
    It will work.
    > So even if I got for latest patch 304 which is released on 16.11.2009, still the OS version for which it built is B.11, so if we have B.23, will it work? I would not see the possibilities of kernel upgrade at this stage.
    Why no possibility for a kernel upgrade if you install a new server?
    > so with same kernel will it work? What else I need to check for the migration and make sure that everything works fine on new server.
    Check
    Note 831006 - Oracle 9i installation on HP-UX 11.23 and 11.31
    Markus

  • I bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4?

    i bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4? that means, making the iphone 4 just like the iphone 3gs?

    Well, you sink everything on your 3GS onto your laptop/computer. Then you reset your iPhone 4. When you are restarting it, add all those apps music (ect)  On to it. It seems difucult but for more info call Apple. I did that and he lead me step by step on how to do it. Well hope this helped~~

Maybe you are looking for

  • KE5Z takes long time

    Hello Gurus, We have an issue. KE5Z report takes quite a long time to fetch the results. The porpblem is if I give the year as 2008 it would fetch the results in 7 secs. But for the same input parameters if i Give year as 2011 it takes 7 mins. I have

  • Who can tell me why?

    I get some Excepiton in my applet here: Exception occurred during event dispatching: java.lang.IllegalArgumentException: Width (800) and height (0) must be > 0      at java.awt.image.SampleModel.<init>(SampleModel.java:105)      at java.awt.image.Sin

  • Won't automatically connect to Airport network after 10.4.8 update

    After updating my Mac Mini CoreDuo from 10.4.7 to 10.4.8, it will no longer automatically connect to our Airport Express based Wi-Fi network. Even though the Network settings in System Preferences have not changed, and they do list it as the preferre

  • FW File; Roundtrip to Illustrator Issue

    When roundtrip to Ilustrator and select the "Edit Original", the graphic opens in "Preview", not FW. The simple graphic (gradient with a drop shadow), is a stand alone FW png file. "Get Info" also confirms this. How do I get this to file open (via Il

  • Delta load green but incomplete..

    Hi friends! Last week, we have a request "100" with QM status and Monitor status GREEN. After, others delta were loaded ok from my DSO to the Cube. When I check the request 100 in the monitor detail tab, I can see that the most of the package (with 5