Search help selection doesn't transfer the value

Hi.
I have a strange situation. I have created a search help on a custom view. The results and everything is populated correctly in result but when i select the value it is not transferred to the input field. I have marked the field as exporting parameter so that it should go to input field but no avail.
This search help is part of a collective search help and parameters of collective serach helpmatch with my custom additional search help. Both places the output field is marked as export parameter.
Any help would be appreciable.
I serached for notes: Note 571027 - Search help control: no values copied and note: 701123.
Wanted to know if somebody has faced this issue.
Regards
Apoorva

Hello,
Sometimes it happens, my solution, in order to not take too long time I write for instance...
FORM match01   TABLES   sel dest
               USING    invalue
               CHANGING selvalue.
  DATA: BEGIN OF t1 OCCURS 2,
    j_1afitp LIKE j_1afitpvt-j_1afitp,
    text60 LIKE j_1afitpvt-text60,
  END OF t1.
* Returned value
  DATA: BEGIN OF r1 OCCURS 1.
          INCLUDE STRUCTURE ddshretval.
  DATA: END OF r1.
* Select data
  SELECT * FROM j_1afitpvt
  INTO CORRESPONDING FIELDS OF TABLE t1 WHERE spras EQ sy-langu.
* SAP standard function to display table as matchcode selection
  CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield     = 'J_1AFITP'
      window_title = 'Select'
      value_org    = 'S'
    TABLES
      value_tab    = t1
      return_tab   = r1
    EXCEPTIONS
      OTHERS       = 1.
* Return selected value
  IF sy-subrc = 0.
    selvalue = r1-fieldval.
    SET PARAMETER ID 'ZJ_1AFITP' FIELD selvalue.
  ENDIF.
And then I attach that metod to the corresponding event, either if it is a dynpro, or normal selection screen.
Bye!!
Gabriel P.-

Similar Messages

  • How to pass the default value to search help selection screen

    Hi
    I need to push a certain value as a default value based on a condition to the slection screen of search help in web UI.
    Could you please let me know how can we do this?
    When we try to open the 'F4' help in web ui then it should populate a certain value as a default value to the selection screen of this 'F4' help. We will get this  default value based on condition.
    Regards
    Anil

    Hi Arun
    I'm using SE11 search help.I'm giving you my code for your reference here.
    DATA:
        ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
        lt_inmap  TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
        lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
        lr_qs           TYPE REF TO cl_crm_bol_dquery_service,
        lr_current     TYPE REF TO if_bol_bo_property_access,
        lv_category    TYPE STRING.
      ls_map-context_attr = 'struct.zzattr_i_1'.
      ls_map-f4_attr      = 'ATTRIBUTE'.
      APPEND ls_map TO: lt_inmap,lt_outmap.
      CLEAR ls_map.
      ls_map-context_attr = 'struct.zzattr_i_1'.
      ls_map-f4_attr      = 'SERVICE_LINE'.
      APPEND ls_map TO: lt_inmap.
      CREATE OBJECT rv_valuehelp_descriptor
        TYPE
          cl_bsp_wd_valuehelp_f4descr
        EXPORTING
          iv_help_id                  = 'ZATTR1'
          iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
          iv_trigger_submit           = abap_true
          iv_input_mapping            = lt_inmap
          iv_output_mapping           = lt_outmap.
    Here 'ZATTR1' is my search help name in SE11 and the field which is having 'F4' help is 'ATTRIBUTE'.
    Now when I press 'F4' on 'ATTRIBUTE' then it will give a popup and this popup is having 3 fields..
    1.'ATTRIBUTE'
    2.'SERVICE_LINE'
    3.Description of 'SERVICE_LINE'  and hence by pressing 'F4' i should get a value in the field 'SERVICE_LINE' based on
       a condition.
    However, if there is a value for ATTRIBUTE on the screen and when we press 'F4' on this then in the popup the value of
    ATTRIBUTE which is there on the screen is appearing in the 'ATTRIBUTE' field  and the same value is being copied to
    'SERVICE_LINE' field in the popup.
    Please guide me how do we populate the value to 'SERVICE_LINE' field inside the search help popup of 'ATTRIBUTE'.
    Best Regards
    Anil

  • Search Help to display 2 different fields/values

    Hi Everyone,
    I am going to use a search help for a certain screen transaction using a search help. A certain input field should have an F4 function (using list box). The values to be displayed after F4 input should be the Business Object type and BP number. This input field is can display either of the two fields.
    How can I do this? Do I need to create a new search help for this? Business Object is from table SWOTIP field OBJTYPE and BP Number is form table BUT000 field PARTNER.
    Kindly help me on this.
    Thanks and regards,
    RE

    Hello Ashish,
    The input help should have two possible values. It may be the Org unit number or the Business Partner number.
    As for my experience in search help, the only thing I know about it is to set a reference db table then the field which is to be displayed during F4. For example, an input help requires a Plant number, the search help will have a reference table (selection method) T001W and a parameter of field WERKS.
    What if the input field can contain either an org unit number OR a business partner number, how should I create the search help? What should be the selection method (table name) to be filled? Is it the BUT000 (for bus partner) or HRP1001 (for org unit)?
    Thank you very much for your attention.
    Regards,
    RE

  • Search help for partner functions in the message to get organisation unit O

    hello,
    Depending on the Business partner category (Organisation, Person,Group) the search help of the partner function in a message should return the corresponding partner list.
    This is working fine for standard partner functions like SLFN0002 (reported by=P) SLFN0003 (support team=O). When doing a searchhelp we get a list of organisation for the "support team" and a list of users for "reported by". this is a normal behaviour.
    When copying the partner function SLFN0003 into a new ZLFN0003 and including it in the partner profile of the message the search help returns all business partners of category P but should return category O.  The function category 0016 (service team) is well defined for ZLFN, I guess the link to business partner category is made indirectly there but I might be wrong.
    Does anyone of you experience the same behaviour ?  Any idea how to correct this ?
    thank you for your help
    Xavier

    Hi,
    Collective search helps:- Combination of elementary search helps. When we need to fetch data based on multiple selection criteriau2019s. More than one tables are Selection from multiple tables
    Steps for creating collective search help.
    1) Enter the search help name and click on create.
    2) Choose Collective search help radio button option as the search help type.
    3) Enter the search help parameters.
    Note that there is no selection method to be entered for a collective search help.
    4) Instead of the selection method, we enter the included search helps for the collective search help.
    5)We need to assign parameters for each of the included search helps.
    6) Complete the parameter assignment by clicking on the push button.
    7) Collective search help offers the user to obtain F4 help using any of the included search helps.
    Hope this helps u.
    thanks

  • How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is  new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files  from i pod to itunesb

    how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is  new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files  from i pod to itunes......

    Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
    - Senuti - http://www.fadingred.com/senuti/
    - Phoneview - http://www.ecamm.com/mac/phoneview/
    - MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
    - Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
    - Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
    - iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
    - Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
    - 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
    Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
    Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
    Additional information here https://discussions.apple.com/message/18324797

  • Bind Variable in SELECT statement and get the value  in PL/SQL block

    Hi All,
    I would like  pass bind variable in SELECT statement and get the value of the column in Dynamic SQL
    Please seee below
    I want to get the below value
    Expected result:
    select  distinct empno ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT'  and pr.empno =100
    100, HR
    select  distinct ename ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT'  and pr.empno =100
    TEST, HR
    select  distinct loc ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT'  and pr.empno =100
    NYC, HR
    Using the below block I am getting column names only not the value of the column. I need to pass that value(TEST,NYC..) into l_col_val variable
    Please suggest
    ----- TABLE LIST
    CREATE TABLE EMP(
    EMPNO NUMBER,
    ENAME VARCHAR2(255),
    DEPT VARCHAR2(255),
    LOC    VARCHAR2(255)
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (100,'TEST','HR','NYC');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (200,'TEST1','IT','NYC');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (300,'TEST2','MR','NYC');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (400,'TEST3','HR','DTR');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (500,'TEST4','HR','DAL');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (600,'TEST5','IT','ATL');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (700,'TEST6','IT','BOS');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (800,'TEST7','HR','NYC');
    COMMIT;
    CREATE TABLE COLUMNAMES(
    COLUMNAME VARCHAR2(255)
    INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('EMPNO');
    INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('ENAME');
    INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('DEPT');
    INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('LOC');
    COMMIT;
    CREATE TABLE DEPT(
    DEPT VARCHAR2(255),
    DNAME VARCHAR2(255)
    INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
    INSERT INTO DEPT(DEPT,DNAME) VALUES ('HR','HUMAN RESOURCE');
    INSERT INTO DEPT(DEPT,DNAME) VALUES ('MR','MARKETING');
    INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
    COMMIT;
    PL/SQL BLOCK
    DECLARE
      TYPE EMPCurTyp  IS REF CURSOR;
      v_EMP_cursor    EMPCurTyp;
      l_col_val           EMP.ENAME%type;
      l_ENAME_val       EMP.ENAME%type;
    l_col_ddl varchar2(4000);
    l_col_name varchar2(60);
    l_tab_name varchar2(60);
    l_empno number ;
    b_l_col_name VARCHAR2(255);
    b_l_empno NUMBER;
    begin
    for rec00 in (
    select EMPNO aa from  EMP
    loop
    l_empno := rec00.aa;
    for rec in (select COLUMNAME as column_name  from  columnames
    loop
    l_col_name := rec.column_name;
    begin
      l_col_val :=null;
       l_col_ddl := 'select  distinct :b_l_col_name ,pr.dept ' ||'  from emp pr, dept ps where   ps.dept like ''%IT'' '||' and pr.empno =:b_l_empno';
       dbms_output.put_line('DDL ...'||l_col_ddl);
       OPEN v_EMP_cursor FOR l_col_ddl USING l_col_name, l_empno;
    LOOP
        l_col_val :=null;
        FETCH v_EMP_cursor INTO l_col_val,l_ename_val;
        EXIT WHEN v_EMP_cursor%NOTFOUND;
          dbms_output.put_line('l_col_name='||l_col_name ||'  empno ='||l_empno);
       END LOOP;
    CLOSE v_EMP_cursor;
    END;
    END LOOP;
    END LOOP;
    END;

    user1758353 wrote:
    Thanks Billy, Would you be able to suggest any other faster method to load the data into table. Thanks,
    As Mark responded - it all depends on the actual data to load, structure and source/origin. On my busiest database, I am loading on average 30,000 rows every second from data in external files.
    However, the data structures are just that - structured. Logical.
    Having a data structure with 100's of fields (columns in a SQL table), raise all kinds of questions about how sane that structure is, and what impact it will have on a physical data model implementation.
    There is a gross misunderstanding by many when it comes to performance and scalability. The prime factor that determines performance is not how well you code, what tools/language you use, the h/w your c ode runs on, or anything like that. The prime factor that determines perform is the design of the data model - as it determines the complexity/ease to use the data model, and the amount of I/O (the slowest of all db operations) needed to effectively use the data model.

  • Search help for Web Dynpro using the SAP-search help

    Hi,
    I’m trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
    The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
    The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
    The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
    In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, …) in the project. In addition it should create the call in the customer generic.
    It would be great if someone can give me a feedback!

    Hi Mike,
    The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
    SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
    Personally I'd recommend you give yourself a little project to work on and just get stuck in
    Kind Regards,
    Owen

  • The same selection doesn't return the same result in 2 identical systems

    Hi,
    After a copy we have 2 systems with same data.
    In a program the same selection doesn't returns the same result, it seems that the sort is different.
    I have checked indexes but they are ok in both systems.
    Here is the selection:
    SELECT but000~partner
    INTO TABLE lt_partner
    *UP TO 50 ROWS
    FROM but000
    JOIN but020
      ON but020partner = but000partner
    JOIN adrc
      ON adrcaddrnumber = but020addrnumber
    JOIN but100
      ON but100partner = but000partner
      WHERE but020~addr_valid_from LE '20100727000000'
      AND   but020~addr_valid_to   GE '20100727000000'.
    Is there a customizing point to define how the database must be sorted ?
    Thanks.
    Edited by: julien schneerberger on Jul 27, 2010 4:18 PM

    Hi,
    Thank you for your answer.
    Result is the same and I don't sort data after the selection.
    Do you think the system copy has "broke" the records order in database ?
    If it is the case it will be impossible to reproduce the same sort, is it right ?
    Edited by: julien schneerberger on Jul 27, 2010 5:19 PM
    Edited by: julien schneerberger on Jul 27, 2010 5:20 PM

  • Creating search help for AFNAM, and display the hit list with values only

    Hi guys,
    I have created a search help for AFNAM, but the hit list displays all even if it is blank.
    I want to display in the hit list the AFNAM with values and do not diplay the blank values...
    Is it possible? How am i going to do it?
    Thanks!
    Mark

    Hi Mark,
    After selecting data use this statement.
    DELETE it_table WHERE AFNAM is initial.
    Regards,
    Suneel G

  • Search Help Selected Values not reflected in WebUI

    Hello All, We have a requirement to create a standard F4 value help for PRODUCT_ID field and the selected value should be reflected in the WebUI field. This field is in a table view context node and the component is a stand alone WebUI component. Everything works fine till the Search help is called and the values is selected. But the selected value is not reflected in the Product_ID field. We have checked many forums and links and tried almost all the alternatives suggested. Here's is the code attached for reference.
    DATA:l_wa_map       TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
           l_i_inmap     TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
           l_i_outmap    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
      DATA:  lv_str_index TYPE string.
    *  l_wa_map-context_attr = 'product_id'.
    *  l_wa_map-f4_attr      = 'PRODUCT_ID'.
    *  APPEND l_wa_map TO:l_i_inmap,l_i_outmap.
      lv_str_index = iv_index.
      CONCATENATE 'table[' lv_str_index '].PRODUCT_ID' INTO l_wa_map-context_attr.
      l_wa_map-f4_attr = 'KEY'. "'PRODUCT_ID'. "'
      APPEND l_wa_map TO: l_i_outmap.
      lv_str_index = iv_index.
      CONCATENATE 'table[' lv_str_index '].PRODUCT_ID' INTO l_wa_map-context_attr.
      l_wa_map-f4_attr = 'VALUE'. "'PRODUCT_ID'.   "
      APPEND l_wa_map TO: l_i_outmap.
      CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
         EXPORTING
          iv_help_id        = 'COM_PR_SHTEXT'      "#EC NOTEXT
          iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name  "if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
          iv_input_mapping  = l_i_inmap
          iv_output_mapping = l_i_outmap
          iv_object_ref     = me
          iv_trigger_submit = abap_true.
    Is there any further code or event call required to reflect the value in the WebUI? or what exactly is required to be done here?
    Thanks in Advance.
    Prasad

    Thanks Dharmakasi, your point to use Condense was the issue which was preventing the values from reflecting in the field.
    However, below code is not required.
    * lv_str_index = iv_index.
      CONCATENATE 'table[' lv_str_index '].PRODUCT_ID' INTO l_wa_map-context_attr.
      l_wa_map-f4_attr = 'PRODUCT_ID'.
      APPEND l_wa_map TO: l_i_inmap.
    I had another requirement which worked in below way. Note this is for Custom data elements with value help in domain. Hope this is helpful for other folks.
    DATA:l_wa_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
    l_i_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
    l_i_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
      DATA:  lv_str_index TYPE string.
      lv_str_index = iv_index.
      CONCATENATE 'table[' lv_str_index '].GC_CARD_TYPE' INTO l_wa_map-context_attr.
      CONDENSE l_wa_map-context_attr NO-GAPS.
      l_wa_map-f4_attr = 'KEY'.
      APPEND l_wa_map TO: l_i_outmap.
      CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
        EXPORTING
          iv_help_id        = '/GLB/CNPCR_GC_CARDTYPE'     "#EC NOTEXT
          iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_dtel
          iv_input_mapping  = l_i_inmap
          iv_output_mapping = l_i_outmap.

  • F4 ( Search Help ) for date field  on the selection screen

    Hi Freinds,
    i have used WDR_SELECT_OPTIONS In my component, i have one date field on selection screen(BUDAT), for this date field i want seach help 
    this is my code
    create a range table for Posting Date
    lt_range_table = wd_this->m_handler->create_range_table(
                                                              i_typename = 'BUDAT' ).
    add Posting Date  to the selection
    wd_this->m_handler->add_selection_field( i_id = 'BUDAT'
         i_value_help_type = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
                                               I_VALUE_HELP_ID = '??????'
                                               I_DESCRIPTION = 'Posting Date'
                                               it_result = lt_range_table ).
    can any one help me
    Thanks
    Srini

    hi sarbjeet 
    i created search help in dictionary and i used that search help in my program, but still its now working , any other ideas
    Thnx
    srini

  • Search Help for input field2 based on value entered in input field 1

    Hi All,
    I have a requirement where in my view, i have two fields.
    1. PO
    2. PO Item
    For PO i could get the standard search help from DDIC, but i need to provide search help for PO Item based on PO selected.
    How can i do that. Any help is highly appreciated.
    Thanks,
    Ajay

    Hi Ajay ,
    following steps cn help u :
    1 Declare the WDR_OVS Component in the used component list in your WD component .
    2  Now go to the View, in the Properties Tab click the Create Controller Usage Button.
    3 It will open a screen with Component Use Entries. There select the Component Use OVS with Interface Controller . Press Enter.
    4 Go to the Context Tab, Right Click the Context and select Create à Attribute , for PO item in ur case .
    5 In the Input Help Mode Field, Select u2018Object Value Selectoru2019 from the dropdown. Then press F4 in the Field OVS Component Usage.
    6 Declare one event handler method with Name ON_OVS in the Method tab of the view. Then Press F4 in the Column Event. 
    Select the Event OVS as shown below and Press Enter. 
    for more info and illustration , also refer :
    http://help.sap.com/saphelp_erp2005/helpdata/EN/30/d7fa41c915da6fe10000000a1550b0/content.htm
    https://wiki.sdn.sap.com/wiki/display/WDABAP/ABAPWDObjectValueSelector(OVS)
    http://wiki.sdn.sap.com/wiki/display/Snippets/OVSSearchHelpinWebDynproAbap
    regrds,
    amit

  • Need to create search help for parameter 2 based on values in parameter1

    hi Specialists,
    I need to create a search help for parameters field 2 ( Country ) based on the values the user inputs in parameters field 1 ( Currency ). The values of field  Currency & Country will come from T001 table.
    The logic is : Based on a unique currency value ( fetched from T001 table ) user needs to get/see all Countries on his selection -screen.
    Can you guys let me know which FM can I use for above & how to pass various values i.e. parameters into that FM. EXplanation with an example/code is highly appreciable.
    Thanks
    Abhinav.

    Hi Abhinav,
    Use this demo code, its working:-
    This code selects sale document item based on the user entry for sales document on the screen field.
    REPORT  ztg_f1f4.
    CALL SCREEN 1010.
    *&      Module  GET_F4_HELP  INPUT
    *       text
    MODULE get_f4_help INPUT.
      TYPES : BEGIN OF it,
                posnr TYPE zvbap-posnr,
              END OF it.
      DATA : itab TYPE STANDARD TABLE OF it WITH HEADER LINE,
             tb_dynpfields LIKE dynpread OCCURS 0 WITH HEADER LINE,
             vbeln TYPE zvbap-vbeln.
      CLEAR:   tb_dynpfields.
      REFRESH: tb_dynpfields.
      MOVE 'ZVBAP-VBELN' TO tb_dynpfields-fieldname. "screen field name
      APPEND tb_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname                               = 'ZTG_F1F4'
          dynumb                               = '1010'
    *   TRANSLATE_TO_UPPER                   = ' '
    *   REQUEST                              = ' '
    *   PERFORM_CONVERSION_EXITS             = ' '
    *   PERFORM_INPUT_CONVERSION             = ' '
    *   DETERMINE_LOOP_INDEX                 = ' '
    *   START_SEARCH_IN_CURRENT_SCREEN       = ' '
    *   START_SEARCH_IN_MAIN_SCREEN          = ' '
    *   START_SEARCH_IN_STACKED_SCREEN       = ' '
    *   START_SEARCH_ON_SCR_STACKPOS         = ' '
    *   SEARCH_OWN_SUBSCREENS_FIRST          = ' '
    *   SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
        TABLES
          dynpfields                           = tb_dynpfields
    * EXCEPTIONS
    *   INVALID_ABAPWORKAREA                 = 1
    *   INVALID_DYNPROFIELD                  = 2
    *   INVALID_DYNPRONAME                   = 3
    *   INVALID_DYNPRONUMMER                 = 4
    *   INVALID_REQUEST                      = 5
    *   NO_FIELDDESCRIPTION                  = 6
    *   INVALID_PARAMETER                    = 7
    *   UNDEFIND_ERROR                       = 8
    *   DOUBLE_CONVERSION                    = 9
    *   STEPL_NOT_FOUND                      = 10
    *   OTHERS                               = 11
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE tb_dynpfields INDEX 1.
      IF sy-subrc EQ 0.
        vbeln = tb_dynpfields-fieldvalue.
      ENDIF.
      SELECT posnr FROM zvbap
        INTO TABLE itab
      WHERE
        vbeln = vbeln.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
    *   DDIC_STRUCTURE         = ' '
          retfield               = 'POSNR'
    *   PVALKEY                = ' '
         dynpprog               = 'ZTG_F1F4'
         dynpnr                 = '1010'
         dynprofield            = 'POSNR'
    *   STEPL                  = 0
    *   WINDOW_TITLE           =
    *   VALUE                  = ' '
       value_org              = 'S'
    *   MULTIPLE_CHOICE        = ' '
    *   DISPLAY                = ' '
    *   CALLBACK_PROGRAM       = ' '
    *   CALLBACK_FORM          = ' '
    *   MARK_TAB               =
    * IMPORTING
    *   USER_RESET             =
        TABLES
          value_tab              = itab
    *   FIELD_TAB              =
    *   RETURN_TAB             =
    *   DYNPFLD_MAPPING        =
    * EXCEPTIONS
    *   PARAMETER_ERROR        = 1
    *   NO_VALUES_FOUND        = 2
    *   OTHERS                 = 3
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDMODULE.                 " GET_F4_HELP  INPUT
    Hope this solves your problem.
    Thanks & Regards,
    Tarun Gambhir

  • Search help - how to further restrict its values

    Hi,
    I have a question here regarding search helps and I hope you all could provide me with some useful pointers.
    There is a select-option of the type bkpf-blart (document type) in the selection screen. I have a problem with retrieving the data properly from the table bkpf for the search help values bkpf-blart so that it will only return 3 values, kr, re and zb values. How may I achieve this properly using a select statement and then using the function module f4if_int_table_value_request?
    (I am referring to a tutorial from the SAP technical website as a guide to use the function module f4if_int_table_value_request.)
    Appreciate any inputs here, as I am still learning the ropes in abap.
    Many thanks in advance.

    Hi,
    try using this demo program
    MODULE GET_F4_HELP INPUT.
      TYPES : BEGIN OF EMPLOYEE,
              EMPNO TYPE ZTG_EMP-EMPNO,
              END OF EMPLOYEE.
      DATA : EMPTAB TYPE STANDARD TABLE OF EMPLOYEE WITH HEADER LINE,
             TB_DYNPFIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
             PLAN_ID TYPE ZTG_HEALTH-PLAN_ID.
      CLEAR:   TB_DYNPFIELDS.
      REFRESH: TB_DYNPFIELDS.
      MOVE 'ZTG_EMP-HLTH_PLAN' TO TB_DYNPFIELDS-FIELDNAME.
      APPEND TB_DYNPFIELDS.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          DYNAME                               = 'SAPMZTG01'
          DYNUMB                               = '1010'
    *   TRANSLATE_TO_UPPER                   = ' '
    *   REQUEST                              = ' '
    *   PERFORM_CONVERSION_EXITS             = ' '
    *   PERFORM_INPUT_CONVERSION             = ' '
    *   DETERMINE_LOOP_INDEX                 = ' '
    *   START_SEARCH_IN_CURRENT_SCREEN       = ' '
    *   START_SEARCH_IN_MAIN_SCREEN          = ' '
    *   START_SEARCH_IN_STACKED_SCREEN       = ' '
    *   START_SEARCH_ON_SCR_STACKPOS         = ' '
    *   SEARCH_OWN_SUBSCREENS_FIRST          = ' '
    *   SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
        TABLES
          DYNPFIELDS                           = TB_DYNPFIELDS
    * EXCEPTIONS
    *   INVALID_ABAPWORKAREA                 = 1
    *   INVALID_DYNPROFIELD                  = 2
    *   INVALID_DYNPRONAME                   = 3
    *   INVALID_DYNPRONUMMER                 = 4
    *   INVALID_REQUEST                      = 5
    *   NO_FIELDDESCRIPTION                  = 6
    *   INVALID_PARAMETER                    = 7
    *   UNDEFIND_ERROR                       = 8
    *   DOUBLE_CONVERSION                    = 9
    *   STEPL_NOT_FOUND                      = 10
    *   OTHERS                               = 11
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE TB_DYNPFIELDS INDEX 1.
      IF SY-SUBRC EQ 0.
        PLAN_ID = TB_DYNPFIELDS-FIELDVALUE.
      ENDIF.
      SELECT EMPNO FROM ZTG_EMP
      INTO TABLE EMPTAB
      WHERE HLTH_PLAN = PLAN_ID.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
    *     DDIC_STRUCTURE         = ' '
        RETFIELD               = 'EMPNO'
    *     PVALKEY                = ' '
       DYNPPROG               = 'SAPMZTG01'
       DYNPNR                 = '1010'
       DYNPROFIELD            = 'TB1'
    *     STEPL                  = 0
    *     WINDOW_TITLE           =
    *     VALUE                  = ' '
         VALUE_ORG              = 'S'
    *     MULTIPLE_CHOICE        = ' '
    *     DISPLAY                = ' '
    *     CALLBACK_PROGRAM       = ' '
    *     CALLBACK_FORM          = ' '
    *     MARK_TAB               =
    *   IMPORTING
    *     USER_RESET             =
      TABLES
        VALUE_TAB              = EMPTAB
    *     FIELD_TAB              =
    *     RETURN_TAB             =
    *     DYNPFLD_MAPPING        =
    *   EXCEPTIONS
    *     PARAMETER_ERROR        = 1
    *     NO_VALUES_FOUND        = 2
    *     OTHERS                 = 3
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDMODULE.                 " GET_F4_HELP  INPUT
    Thanks
    Arun Kayal

  • Fields gettin jumbled in search help selection

    hi,
    i created a new search help for va02..
    but after entering values in the fields and hitting an enter the output values are jumbled and out of order..
    cud any1 tell me why is it so???

    this is the order in the search help
    bstkd_e
    vkorg
    kunnr
    vtweg
    spart
    vkbur
    vkgrp
    ernam
    auart
    bstdk
    trvog
    vbeln
    i want them in the very same order after selecting te fields too..
    but the values still remain jumbled with values geting concatenated to the adjacent fields...
    what should i do??

Maybe you are looking for