Search payload message via TREX

Hi Friends,
   I like to implement TREX search engine for payload message search in sxmb_moni.
   Kindly gude me step by step guide to implement Trex search engine for my scenario.
   Thanks in advance.
Renu.

>
Renu PI wrote:
> Hi Friends,
>
>    I like to implement TREX search engine for payload message search in sxmb_moni.
>    Kindly gude me step by step guide to implement Trex search engine for my scenario.
>
>    Thanks in advance.
>
> Renu.
HI,
Not sure if TREX will help you to search the payload from sxmb_moni, because as per my knowledge Trex is alreday there in XI system and we use it in RWB --- Message Monitoring.
But you can go through these blogs which will help you to search the payload data.
/people/sravya.talanki2/blog/2006/02/21/abap-based-trex-in-xi-proto
/people/alessandro.guarneri/blog/2006/02/14/super-message-monitor-for-sap-xi
Regards,
Sarvesh

Similar Messages

Full text search in Filenet via SAP DMS

Hello experts,
Hopefully you can help me with the following. My customer has SAP DMS and uses FileNet (v4.0) as content repository. They use Verity as tool for full text search (SAP and non-SAP). Verity has it's own user interface / search screen. Question is if it is possible for SAP (easy)DMS users to do full text search (via CV04N or EasyDMS searchscreen) and search in the FileNet repository (directly with TREX or via Verity). The customer has the ACSAP connector up and running.
I've implemented TREX with SAP content server and index server before, but I'm not familiar with FileNet possibilities in that area, so hopefully someone has experience with this?
thanks in advance, Erwin

Dear NAG
For text search you have activate TREX Server
follow the steps
Set TREX
A:- Transaction: SRMO
Install TREX , and create RFC destination to connect to
TREX.
B:- Transaction: SKPR06
Check the flag to Document Area "DMS" to utilize this document area for
document search.
For Indexing
A: Transaction: SE38
Run the report program "RSTIRIDX_REINDEX" to create Index.
Also, run the report program "RSTIRIDX" to create Index.
Set mime type for the text search
A: SPRO --
Cross-Application Components > Document Management System > General
Data > Settings for Storage Systems > Create MIME types for full
text search,
Enter MIME type like
"application/msword",
"application/pdf".
Retrive document via Test Search
A: Then, test retrieval document search using
Transaction: SKPR07.
Enter Document Class "DMS_PCD1", Language "EN", Document Class "DMS",
and try "TEST search".
Regards
Tushar Dave

Leopard's Spotlight doesn't search Mail messages

Leopard's Spotlight isn't searching email messages. I made a clean install of 10.5, and have two POP accounts. The message files are right there under ~/Library/Mail/... . I rebuilt the index for the system volume by adding and then removing the volume from the Privacy zone in Spotlight preferences. I also tried some of the command-line suggestions posted elsewhere for this problem. I recently added my backup volume to the privacy zone, but other than that the zone is empty.
But the problem remains. Outside Mail.app, Spotlight never comes back with search results that are mail messages. Inside Mail.app, searching "entire message" returns 0 results. Does anyone know how to diagnose this problem? Can I see if a particular file is included in the metadata index?

Hahaaaa! Solved it - at least for me...
Please read the whole explanation first before just gabbing any presented commands and executing them in the Terminal. The solution requires no Terminal.
I had exactly the same problem described by MikeW and JJ. I tried everything like you before at no avail, too. But I tried one more thing that did work and indexed all my mail. Here is what I did at the command line. Don't type the command right away. It will work, but this is not the root cause of your problem, I present it just to explain:
find ~/Library/Mail -name "*.emlx" -exec mdimport {} \;
This searches for the individual message (*.emlx) files themselves and throws them one by one onto the mdimporter which imports them just fine. Still, a plain mdimport ~/Library/Mail would not work which pointed me in the right direction: Spotlight did not "see" these individual message files. But Why?
I fiddled a bit with file/folder permissions since I also simply upgraded from Tiger and ended up with old Tiger permission based user accounts. No result. I discovered, that in Finder the mailboxes, say ~/Library/Mail/Mailboxes/INBOX.mbox etc. were displayed as package files instead of folders. Strange. So again I tried mdimport -d1 ~/Library/Mail now with a bit of debugging. Aha! Spotlight imports this folder as type 'dyn.ah62d4rv4ge81g45mr3wgn8a', or similar, a dynamic UTI, instead of with 'com.apple.mail.mbox' as what it should have been. Since this unknown dynamic UTI dosn't mean anything sensible to Spotlight, it would simply skip the folder, not scanning it's contents with the well known result that mails cannot be searched by content.
So, what is essentially overwriting these UTIs? Especially because this would not happen in another Leopard-created user account. I felt guilty as I added some custom UTIs in the past, but nothing to do with mail at all. So who carries UTIs for Mail.app? Well... Mail.app! Another Mail.app? YES! I remembered, that I had an older complete pre-Spotlight system backup on my current system, including all applications including Mail.app in version 1.3.something. AFAIK only with Mail 2.0 Apple changed the way Mail saves messages and they apparently also changed the UTI of .mbox to the new format. I simply deleted the old version of Mail.app. Immediately after that the icons of the .mbox changed and I could open these folders in Finder. I tried again mdimport ~/Library/Mail and - boom - Spotlight imported all my mails!
Long story to explain my thoughts, here are 5 steps for you to try:
1. Search your system to find out if you have multiple different copies of Mail.app. You can do that with Spotlight/Finder or enter in the terminal:
sudo find / -type d -name "Mail.app" -ls
(You need to be admin to sudo, type your password when prompted)
2. Locate and check the found versions of Mail.app in Finder via the get info window.
3. Delete all but the actual copy of Mail.app in /Applications from your system (empty trash!).
4. Enter the following line in the terminal to have Spotlight import your messages:
mdimport ~/Library/Mail
Should take much longer now, depending on the number of mails you have.
5. Check the result by searching mail content in Mail/Finder/Spotlight, enjoy!
Note: If you did find and delete old versions of Mail.app, but step 4 did not work, you might have to log out and in or you can even try to restart the machine. In my case the result was instant. If all of that did not work for you - sorry - but probably the above helps you to track your particular problem down.
ecke

Searching Mail Messages

Is it just me or is the search function in Apple Mail really bad all of a sudden? I'm searching for messages, which I know are there, and it doesn't find any of them. I have 3 IMAP Google Apps account in Apple Mail and at the moment to search for a specific message I'm having to login to Webmail and then search via Gmail's search function, which then finds the messages I'm after.

One thing thing the cited article doesn't mention is that you can prepare an image that is Spotlight indexed, convert it to a DVD image, and burn that...
With regard to your question, if you know how to use the UNIX command line, open a Terminal window and use grep to search the elmx files. If you don't want to go that route, there are a bunch of desktop search alternatives like Google Desktop which, *I think*, will permit you to to index removable media.

Requirement to issue COMMIT to propogate messages via Interconnect;

Interconnect is currently in the frame as the Hub and Spoke for a solution integrating various vendor components.
However one item I would like to get clarity on; the concept that for a message to be propagated via Interconnect a commit must be issued. e.g. Doing data entry against Oracle Database; the inputted data will be validated against details from another database and/or a call to a rules engine using Interconnect. To get the message out to Interconnect my current understanding is that a commit must be issued in the Data Entry Database ==> commits the entered data to the database.
However if the validation fails (e.g. person id not valid ) after the call to the other database / rules engine , concerned we may have previously committed data in the Data Entry Database which is not correct. Ideally would like to issue a commit on the data entry database only when the inputted data has been successfully validated.
Questions;
Is a commit required to propagate messages via Interconnect ?
If so is it possible to restrict the scope of the commit to Interconnect Message call by using the Autonomous Transaction construct ?
Are there other approaches ?
Have searched various places on Oracle web-site but can't find a definite answer to the above questions, so all advice most welcome.
Any pointers to what I should read up on which would aid my understanding on Interconnect much appreciated.
Rgds & Thanks,
Eamonn

Yes a commit would be required if you are using the database adapter to transmit the data to interconnect.
And yes it is possible to perform this in an autonomous transaction.

Lumia .sms (text messages) via pc?

hi all,
its probably not the first one about this, but is there a way to send type sms messages via PC? i love my lumia 920 but if i had known in advance that pc suite would not work anymore this would affected my choice... its a feature i used allllot.... to understate it.
are there no options to make this work or any alternatives?
microsoft used to have a tool for this but it doesnt work with a lumia either,
i thought you could run it via outlook2010 but then udd need to build a exchange server on the lumia... seems all a bit over the top. i wish you would kept the pc suite support...

The operating system on the Lumia 920 is under Microsofts control, that is why it does not work with PC Suite. Microsoft hasn't added the option in the OS to do what you are wanting so at the moment it is not possible.
You can suggest the feature to Microsoft here: http://windowsphone.uservoice.com/forums/101801-feature-suggestions

How to send error message via a mail to the customers email id

HI experts ,
i have a requirement,In idoc where i have to send the error message via email to a perticular emailid?
please help me n tell also which fm is used for that?
Thanks
RAhul Sisodia

Hi ,
Check this Link..
[sending an email with multiple attachments;
Regards,
Sachin M M

Creating service desk message via web interface

Hi
I have setup the servie desk and use the incident management workcenter to view the messages. In that workcenter there is a link that allows one to create a message via a web interface. When that webpage opens there are 3 tabs. The first tab is your Problem discription tab the second one is Additional Information tab. In that tab there are 3 choices Solution, Project and Process. When i select a project and then go to the process tab i dont see any process there (i assume these are business process for the project that was choosen). Does any one have additional information regards this functionality.

Problem solved

Mail will no longer search "Entire Message". That option is grayed out. Why?

How do I get Mail to search "Entire Message". That option suddenly is grayed out.

A SMTP is a server for sending messages, and not as an Incoming server. Do you mean an IMAP server?
I did not mean it was for a single message, but the fact that you had a single message in local storage turned the option on, but it could only have search the messages that were in local storage.
Check again in Mail Preferences/Accounts/Advanced what is selected regarding Keep copies of Messages?
Ernie

I am unable to recieve media messages via text message and the profile says its not verified. How do i fix this?

i am unable to recieve media messages via text message and the profile in the settings says its not verified. How do i fix this?

MMS is a carrier feature. Contact the carrier to ensure you account is provisioned correctly.

How to forward sms messages via email with date and contact received info

Does anyone know how to forward sms messages via email with date and contact received info.
Currently when I forward only the body copy of the sms message is sent in the email.

This is not currently possible. Sorry.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to send a text message via email

I researched and did some trials and found out i can send multimedia messages via email and not text..
MMS - 10 Digit [email protected] - WORKS !!
Text mail - 10 Digit [email protected] - DOESN'T Work.
Can someone help ?
Thanks !

Swapann wrote:
MMS - 10 Digit [email protected] - WORKS !!
Text mail - 10 Digit [email protected] - DOESN'T Work.
Can someone help ?
Help with what? It looks like it's working exactly as it's supposed to.
If you want to send a plain text message, no formatting, no signature, no smilies, no extra anything, then use plain text mode and send it via vtext.com If there is a picture, or it's an html email, it needs to be sent via vzwpix.com.

I need to send a message via socket from a C program to a Java program

Hi,
I need to send a message via socket from a C program to a Java program. The message has three data: a long, an integer and a string.
How can I put those three fields in a array of bytes in C? How can I extract those same three fields from an array of bytes in java?
Thanks a lot!

A few options:
JNI
Corba
Using sockets directly
take your pick.

Search entire message not working in Mail, but Spotlight works.

I am having a problem where my mail App is not searching the entire body of the message any more. I installed Lion soon after it was released, and I believe that it has been working up until recently.
If I do a search, it won't search the message body, and gives me no option to search for "Message contains" (just "People" and "Subjects"). If search for subject "foo" and then click on the "Subject" pull down menu, it shows "Subject" and "Entire Message", but "Entire Message" is greyed out.
I've done a lot of web searching and most people with similar problems had problems with Spotlight.
If I do a Spotlight search, it does find all of the mail messages correctly. Its just the Mail app that won't let me search.
I haven't tried re-indexing spotlight yet because spotlight seems to be working okay.
Note that all of my mail accounts are "POP" accounts with the mail stored locally on my machine.
Has anyone else encountered this?
Thanks,
Ron

I should have tried this before posting, but a reboot fixed my problem.

I cant recieve messages via bluetooth on my nokia ...

hi
hopefully you can help me
i can sent but cannot recieve messages via bluetooth on my nokia 6230i ive had the phone about 2 months ,ive phoned the phone company i got the phone from and they said they dont deal with bluetooth its a free from the phone manufacturer i have no number to get in touch with nokia so im trying this hopefully you can help
tinman
(ps)
and yes i have made sure that bluetooth is switched on .on my phone and the phone/s that i am trying to recieve from ...

hi there
the phone or phones i am trying to recieve frem are sony ericcson d750i and a sony ericcson k750i
i think the phones are paired
and the files im trying to recieve are either music files or video clips
hope this is the info you were after

Search payload message via TREX

Similar Messages

Maybe you are looking for