Search string in report variants

Hi all.
I'm using RPR_ABAP_SOURCE_SCAN for searching strings in ABAP reports. But now I have to search strings not only in reports but also in variants.
Does anybody know a report like RPR_ABAP_SOURCE_SCAN for variants?
Thanks in advance
christian

Hi Andreas and Vasanth.
In principle this fb solve my problem. Unfortunatly, it seems that one of the scanned ABAP reports has an error. The fb abort with message "FORM xxxx doesn't exist."
Nevertheless, thanks for your support.
christian

Similar Messages

Highlight search string in a pl/sql report

Hi all,
I followed the example of QBE by Scott Spendolini. I got it working. But I am trying to add the highlight search string functionality, in the report created. The report is created from a dynamic pl/sql query. Can you give me any ideas or an example? Thank you for your time in advance,
Rgds,
Suma.

Hi Suma,
Your Search button runs a process called "RUN_REPORT". Presumably, this process picks up the values from the tabular form to construct the new SQL statement.
Given that you don't have a normal report definition - ie one that you can use the Highlight Words option - the only other possibility is to adjust the SQL query results.
Let's assume that you have in your RUN_REPORT process a variable called vJOB that holds the JOB value from your QBE grid. Your SQL statement could then be adjusted to something like:
SELECT EMPNO,
ENAME,
'<span style="color:red">' || JOB || '</span>',
etc
FROM EMPTABLE
WHERE JOB = vJOB;
Obviously, without seeing your code, I can not say exactly how it should be constructed to highlight the word(s), but the above should give you an idea of what you need to do. If you're still not sure, can you please paste into this thread the RUN_REPORT code.
Regards
Andy

How to dynamically set connection string for report in C# code?

Hi,
I have installed CRVS2010. I have created new Crystal Report WPF Application and new report. I would like to set connection string for report in code dynamically.
Is this possible?
Thanks
Ivana

Lots of posts in this forum on how to set database connections. WPF should not be a consideration as it's just a viewer. The report engine is still the same. Search these forums. Use the search box at the top right corner of this page. Look at samples here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Note that none of the samples above are using WPF, but like I said, the WPF is just a different viewer and will not impact how the report engine logs on to a database. (I think of it as a gray car vs. a red car. Same engine, just the color is different)
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Two finger swipe replaces google search string

MBP with Safari 6.0 experiencing this problem. Another user was experiencing the issue here:
http://www.ehmac.ca/mac-iphone-ipad-ipod-help-troubleshooting/99937-safari-two-f inger-swipe-bug-replaces-google-search-string-os-10-7-3-a.html
I don't know where the bug reports are to follow up on it and I haven't seen any patches for it. Any advice? Specifically, I'd like to know how to file the bug (in case I find another) and to follow up on any existing issues.
TIA,
Scott

Is there no place to track the status of the report or see any other outstanding issues so I don't bother filing duplicates?
Never heard of such a function here. This method gets feedback to the people who count but it is completely behind the scenes. Part of Apple's "cards close to the chest" method of doing pretty much everything. You should have been looking at the "don't expect a response" screen after you hit the submit button on your bug report.
If there is something that needs clarification, I suspect they will use e-mail to ask for it, but don't stay home waiting!
Have you read Walter Isaacson's biography of Steve Jobs? Things like this took on a new--if not satisfying--perspective for me after reading it. So far, it has persisted in their corporate culture in the after-Steve era..

How to search string in BSP Application?

Hi,
Report RS_ABAP_SOURCE_SCAN is to search string in ABAP. How to search string in BSP Application?
In standard BSP Application is calling another BSP application and this hard coded in application.
Regards,
...Naddy

Hello Naddy,
7 Years later and it seems there is still no possible way to search a string in a BSP application.
Using Report BSP_EXPORT_CLASSES (Uncheck list of packages, provide BSP application name) I was able to download the complete BSP application to my desktop computer; after that I used TotalCommander (free edition) to scan the files for the string. (Mode set to UTF8)
Ugly workaround but it works.
Regards

How/can I use boe search 4 all reports that use specific tables

How/can I use boe search 4 all reports that use specific tables
can this be done with query builder
or
is there a way to search all sql of all reports for specific strings and report names so that I can find all report sql that uses table1 for example?

Hi Bart!
You can use VBScript to extract the dataprovider within the reports (Search for SDK Desktop Intelligence).
If you can wait a few days longer, I can provide my script.
ciao Hakan

Search string exactly-urgent

i have written a program where in using a table names ,and their corresponding field i search for the fields in all Z--object..
the problem here is ,wen i search the strings which are not the exact match are also listed
Eg: if search string is kunnr....... it_kunnr is also listed.....which i dont want ....
i have used read report and then search

hi Renu,
in order to compare strings, you can use CO (Contains Only).
here is quote of help in SAP
CO (Contains Only):
c1 contains only characters from the string c2.
If c1 or c2 is of type C, the comparison takes into account the full length of the field, including blanks at the end.
comparison.
If c1 is of type STRING and empty, the result of the comparison is always positive.
If c2 is of type STRING and empty, the result of the comparison is always negative, unless c1 is also an empty string.
If the result of the comparison is negative, the field SY-FDPOS contains the offset of the first character in c1 which is not also included in c2.
If the result of the comparison is positive, the system field SY-FDPOS contains the length of c1.
The comparison is case-sensitive.
Examples:
'ABCDE' CO 'XYZ' is false; SY-FDPOS = 0.
'ABCDE' CO 'AB' is false; SY-FDPOS = 2.
'ABCDE' CO 'ABCDE' is true; SY-FDPOS = 5.
please award point if helps
eddhie

How to make search string for the searched text containing single quote?

Hi all,
When trying to search some Contacts from Eloqua, I have to make a search string which would list out some specified EmailAddress.
Unfortunately, I meet several emails who have single quote in their spelling.
I got 'invalid format' error when both using them directly and making single quote twice.
Any suggestions?
Thanks,
Biao

When testing, the following examples:
GET /Api/rest/1.0/data/contacts?search=emailAddress=bm'[email protected]
GET /Api/rest/1.0/data/contacts?search='emailAddress=bm'[email protected]'
GET /Api/rest/1.0/data/contacts?search=emailAddress="bm'[email protected]"
GET /Api/rest/1.0/data/contacts?search="emailAddress=bm'[email protected]"
All return:
"elements":
    "type":"Contact",
    "id":"1421620",
    "createdAt":"1419611518",
    "depth":"minimal",
    "name":"bm'[email protected]",
    "updatedAt":"1419611519",
    "emailAddress":"bm'[email protected]"
"page":1,
"pageSize":1000,
"total":1
Likewise, the following returns nothing:
GET /Api/rest/1.0/data/contacts?search=emailAddress='bm'[email protected]'
Hopefully this helps,
Bojan

Bank statement search string for posting rule 2

Hello,
I created a search string (also activated) for clearing sub legder account. Folowing are the combinations i tried:
1) ###(.| )#######
2) (^| )###(.| )#######( |$)
3) ###.#######
Open document reference text on header normally carries 3digits followed by a dot and then seven digits. For example:
123.1234567. I also want to include 123 1234567 (sometimes it appears like this in bank statement) but the system should intrepret it as 123.1234567.
I think above string acheived this when i did a TEST (button) next mapping screen on the same screen.
I uploaded the bank statement and then went to another config where you do simulation for a bank statement (uploaded). There the system checks for first three digits only and the document found coloumn is blank (because it checks only first three digits and there are too many probable customers in partner's field).
Posting rule - algorithm is no 21
search string - algorithm is no 21
mapping field in search string - i tried with bland and without blank (###.#######) it is all same.
How to make the system check 3+7 digits with dot? and why it checking only first three digits. Can some help?
BG

Hi,
I also would be interested to know this. If anybody can give a step by step analysis, it would be highly appreciated.
Regards,
Ravi

How to define a specific report variant execution in Area Menu

For report REP01, for exemple, with a selection screen, I defined a variant with specific options, named VAR_SPEC1, to be used by a certain group of persons.
Now I created the Area Menu ZMSPEC1, and I need to associate to it an entry to execute program REP01 via variant VAR_SPEC01. How can I do it?
I saw that the program REP01 already has already defined a report transaction (ZEXREP01, for ex.), but if I use this transaction in the Area Menu, I will not use my variant...
I was looking to the different types of transactions that can be defined, but I am a bit lost.
Thanks in advance.
Davide

Hello,
I am still a bit lost about the easier (or better) way to associate to the new Area Menu the execution of a non-local program with selection-screen, using some predefined options (hidding some fields, predefining others...).
Can someone be more specific?
I guess the necessary elements are:
1) non-local program REP01;
2) core report variant VAR_DEFAULT, for program above.
3) new local variant VAR_SPEC1, for program in 1)
4) ...
5) ... some solution to link both parts...
6) ...
7) Area Menu ZMSPEC1, with a new item to call the execution of REP01 with variant VAR_SPEC1.
Any ideas? many thanks!

How to restrict the display of report variants

Hello All,
I want t know how to restrict the display of report variants.
I mean, when a user saves a variant for his/her purpuse on some report program, only he/she can refer the variant while other users cannot.
I know that by setting the attribute of the variant ("Protect Variant ", "Only Display in Catalog"), this would be possible, but I want to know another way, without this setting.
Thank you for your help in advance.
Regards,

Hi,
Can you just try this
DATA:it_varid TYPE TABLE OF varid.
DATA:wa_varid TYPE varid.
INITIALIZATION.
SELECT * FROM varid INTO TABLE it_varid
      WHERE report = sy-repid
      and ename = sy-uname.
IF sy-subrc = 0.
    LOOP AT it_varid INTO wa_varid .
      CALL FUNCTION 'RS_SUPPORT_SELECTIONS'
        EXPORTING
          report               = sy-repid
          variant              = wa_varid-variant
        EXCEPTIONS
          variant_not_existent = 1
          variant_obsolete     = 2
          OTHERS               = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDLOOP.
ENDIF.

Use of special characters in Search String

What is the use of special charaters like
in the search string in the Find & Replace of ABAP editor ?
I want to search for all strings starting with V which are followed by alphabets like
VA
VB...
If I use V*, it also gives me results like
V/R...
Whether it is possible to specify such a condition?

Hi,
While giving ur search in FIND & REPLACE,
use the match case or match whole word only..
Then u will get search results only where the exact case of that variable is used..
As per my knowledge there is no signification of special characters ,- : ; in the search string..
Hope this helps...
Cheers,
Simha.

Dynamic seleciton in report variant FBL1N

Hi,
Problem Description
I am trying use dyanamic selection in report variant of FBL1N but its not working.
My working
I am using dyanamic date variant.
In the selection screen of FBL1N, we have posting date in dynamic selections.
While creating a variant for the selection screen of FBL1N, I am selecting Posting Date of dyanamic selection and choosing selection variant as "D" (D: Dynamic date calculation) along with Current Date as variable.
However system is not accepting this and the current date is not coming up while choosing this variant.
Solution required
Can anyone please help me out with dyanamic date calculation in dates from dynamic selection in report FBL1N.
Thanks,
Nitish

Dear
You did not specify in which version you are working. If you are in new GL instead of using FBL1N you can as well use T.Code S_AC0_52000888 and here you can make dynamic selections.
Regds

Search Strings

HI
We are using Payment Order and through EBS we clear the vendor open items as after payment run system generate the payment order number but vendor open items remain open. For Bank Transfer BTC is NTRF. But for all the check which are also enchashed at counter bank is also using BTC NTRF. So we have two posting rules for the same BTC. For payment order clearing we are using Algoirtham 029. which is assigned in EBS global setting. To solve above we define the search strings but system is not changing the posting rule as check number coming immediately after NTRF1013.
Our Check Number is exactly 4 characters. So we define search string like below
Maping empy
In search strings use we entered CC, HB, AC then algoritham999 as 029 is not exits then search string target field Posting rule and enter posting rule for check then create another entry in which target field is Algoritham and select algoritham 011 for check.
Now our file for check is coming like 61:1201230123D10000,00NTRF1013 but system not read this record.
Just for testing we make another line and like 61:1201230123D10000,00NTRF1013 //1013 and system able to change the Posting rule. No idea why its is behaving like this way
Please help
Farhan Qaiser

Dear Farhan,
Please create the search string in below way.
(^ |#| *)NTRF####( *|$) with remaining parameters you have entered, please make sure that you are entering global interpretation algo in search string also.
Or please check any other text is there to identify check transaction and create a search string for that.
Regards
Shanu

Electronic Bank Statement Search Strings Customer Item Clearing

I have configured EBS and I am trying to clear open items from customer accounts using Search Strings.
I have mapped the customer account on the bank statement to the SAP customer account. For example, Victor Osagie is mapped to account 1400036.
When I process transactions with exactly the same note to payee as above, open items in the customer account clear. However, when the note to payee field changes for example to Victor Osagie 110000000. The customer is recognised but the item is not cleared from the customer account.
The statement format is BAI and we are using the BAI processor.
How can I manipulate the search strings to allow the clearing of items like this?
Victor

Problem solved. Applied note 1085596
Anil

Search string in report variants

Similar Messages

Maybe you are looking for