Searched-- not found

I went through the search for open discussions, did not find any answers for this one. Yesterday I was playing newly loaded songs in iTunes and it crashed. I followed the instructions to report it, then iTunes "restarted" by itself.
Previously I had a problem with repeated iTunes crashes, when the updates in November of last year came out it quit crashing-- thankfully. Then, as I said, yesterday it crashed.
It did NOT reload my library. All of the smart playlists are blank, and if you go to the music folder it shows 1236 songs.
Before the crash it had 44,333 songs.
Not only that, but if you start to play the songs listed more than a few are incomplete, just cut off in the middle.
Reloading, reset of play counts, duplicate issues-- it takes MONTHS to fix anything like this, and even if you do, then you have to live in fear of it doing it again. The latest "damaged library" is 12.1 mb while the new one is a whopping 2.1 mb-- so the data should be in the damaged library.
Is there any [bleep] way to get the load dates, last played date, play counts out-- to "undamage" the library?
The one time I actually got a response from Apple I was told to call a tech and give him a case number-- when I did so he told me he needed a credit card, that it still was a charged help, and a minimum of about sixty dollars. I declined that "offer" and thankfully the iTunes update helped.
Now here I am.
Six hours before the crash I went to the Apple online store and sprang for almost fourteen hundred dollars of new machine to replace this old one, but since the machine is due to arrive in a week I want to get this taken care of BEFORE the new toy arrives with a new OS to learn.
Any suggestions this time?
Or does iTunes have a "stress the user" function I don't know about?
.

I've been through the disc error checking route a couple of times-- the drives are fine, the original data was fine, it appears to be damaged during playback.
I have NOT accessed the backup copy because that would be several hundred songs short of what I have. It is in reserve; my paranoid "copy it all and then turn off the drive" system simply means that if this cannot be salvaged I will only have lost a couple of hundred songs.
I know there were a number of unplayed songs when it crashed because that is what I was doing-- listening to new music. I just don't know what the names of the two or three dozen songs I had yet to hear, and I really want last play dates and play counts.
I know that sometimes I will "show" duplicates but when you go to the actual files there is only one copy, but I also deliberately keep some dupes-- like the original Harry Champion "I'm Henery The Eighth" recording.
I just don't have a clue was to why it crashed.
.

Similar Messages

Previous DB Record Returned When Last Search Not Found

I have a problem that nobody seems to know about or perhaps I'm just not seeing. Anyway, I put together a simple SQL manager javabean and other than my current issue, it's worked great. Here is my problem:
SELECT * FROM site_mimetypes WHERE extension = 'PROPERTIES'
SELECT * FROM site_mimetypes WHERE extension = 'DOC'
SELECT * FROM site_mimetypes WHERE extension = 'NODICE'These queries run as they should at the db command-line:
- first query returns empty
- second query returns a record that matchs
- third query returns empty
Now, if I run this through the sql javabean, the third query returns the results of the second query. I've also tried using the sql "LIKE" command to no avail. This happens very consistantly. Whats funny though is if for example the extension I'm looking for doesn't exist at all in any form, meaning say I'm searching for the string "EXE", it will return properly as empty because there aren't any records that start with the letter "E". Now as I understood it, isn't the "=" operator supposed to find an exact match. It certainly works a 100 percent of the time during the first query and always when done from the db command-line. I'm using MySQL, Tomcat 5.0, JDK 1.5, Connector/J 3.0.... Below I'll post my sql javabean and below that, I'll post my simple JSP file that calls that javabean:
JAVABEAN:
package sql;
import java.sql.*;
import java.util.*;
import java.io.*;
public class SQLManager {
     private String SQL_URL = new String();
     private String SQL_USER = new String();
     private String SQL_PASS = new String();
     private static String SQL_DRIVER = new String();
     private String SQL_RESULT = new String();
     private String PROP_PATH = "C:\\Program Files\\Apache Software Foundation\\Tomcat 5.0\\webapps\\dam\\WEB-INF\\classes\\sql\\";
     private String PROP_FILE = "database.properties";
     public SQLManager() { }
     public String getResult() { return this.SQL_RESULT; }
     public void executeQuery(String statement, int column) throws SQLException {
          try {
                    retrieveProperties(PROP_PATH + PROP_FILE);
                  Class.forName(SQL_DRIVER);
                      Connection conn = DriverManager.getConnection(SQL_URL, SQL_USER, SQL_PASS);
                    Statement stat = conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE);
                    ResultSet rs = stat.executeQuery(statement);
                    while(rs.next()) {
                         this.SQL_RESULT = rs.getString(column);
                    rs.close();
                    stat.close();
                    conn.close();
          } catch(ClassNotFoundException ce) { }
            catch(SQLException se) { }
            catch(IOException ie) { }
     public void retrieveProperties(String filename) throws IOException {
          Properties props = new Properties();
          FileInputStream in = new FileInputStream(filename);
          props.load(in);
          in.close();
          this.SQL_DRIVER = props.getProperty("jdbc.drivers");
          this.SQL_URL = props.getProperty("jdbc.url");
          this.SQL_USER = props.getProperty("jdbc.username");
          this.SQL_PASS = props.getProperty("jdbc.password");
}JSP
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN"
"http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" >
<head>
<title>JSP Test</title>
<meta http-equiv="content-type" content="application/xhtml+xml; charset=UTF-8" />
</head>
<jsp:useBean class="sql.SQLManager" id="sql" scope="page">
</jsp:useBean>
<body>
<%
sql.executeQuery("SELECT * FROM site_mimetypes WHERE extension = 'VOODOO';", 2);
sql.executeQuery("SELECT * FROM site_mimetypes WHERE extension = 'DOC';", 2);
sql.executeQuery("SELECT * FROM site_mimetypes WHERE extension = 'FILE';", 2);
%>
<%= sql.getResult() %>
</body>
</html>

My guess is that the third query is throwing an exception and the previous result set does not get cleared. To test this theory simply change the execution order of the queries. Also I'd rewrite the executeQuery() method as follows as it guarantees resource cleanup in the event of an exception and will display the exception to the console if one does get triggered:
public void executeQuery(String statement, int column) throws SQLException
try
    retrieveProperties(PROP_PATH + PROP_FILE);
    Class.forName(SQL_DRIVER);
    Connection conn = DriverManager.getConnection(SQL_URL, SQL_USER, SQL_PASS);
    Statement stat = conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE);
    ResultSet rs = stat.executeQuery(statement);
    while(rs.next())
      this.SQL_RESULT = rs.getString(column);
catch(Throwable th)
    th.printStackTrace();
finally
    try
      if (rs != null)
       rs.close();
    catch(SQLException sqe)
    try
      if (stat != null)
       stat.close();
    catch(SQLException sqe)
    try
      if (conn != null)
       conn.close();
    catch(SQLException sqe)
}

CRYSTAL REPORT VIEWER NOT FOUND IN VC++

Hi All,
I am migrating our appn VC++ 6.0 code to VS 2010(MFC code compiled in VS2010). I could able to compile all the code in VS 2010 and i am created vb.net report application using crystalreport viewer, it working fine, afterthat i am converted vb.net code to C#.
My questions are,
1) how to add crystalreportviewer control in VC++ (searched not found) or alternative any control is available in vc++ using same c# code?
2) if its possible , to load rpt files without viewer control ? ,if yes, please provide me sample code.
Regards,
Esha Abdullah M

I found one, since you never looked, to get you going. It's written in C++, just change the assemblies to CR for VS 2010
General
Crystal Reports .NET - All Sample Applications
This set includes the following samples:
    cr_net_sdk_tutorial_samples_en.zip
    crsdk_net_samples_12.zip
    NET-CPP2005_CRNET_CR115_Change_Record-Selection-Formula.zip
#using <C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll>
#using <C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Shared.dll>
#using <C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Windows.Forms.dll>
And comment out the Page event, seems they don't work in 2010, we changed the event handler:
//               this->crViewer->ClickPage += new CrystalDecisions::Windows::Forms::PageMouseEventHandler (this,&ViewForm::crystalReportViewer1_ClickPage);
//               this->crViewer->DoubleClickPage += new CrystalDecisions::Windows::Forms::PageMouseEventHandler (this,&ViewForm::crystalReportViewer1_ClickPage);
Don
Edited by: Don Williams on Jul 13, 2011 9:05 AM

Oracle.jbo.NoDefException: JBO-25002: Definition oracle.webcenter.search.model.DataControls of type null is not found.

Hi experts,
I am trying to deploy a new version of a WC Portal application and when the deployment finishes successfully I cannot see the web page. The error is:
Error 500--Internal Server Error
oracle.jbo.NoDefException: JBO-25002: Definition oracle.webcenter.search.model.DataControls of type null is not found.
    at oracle.jbo.mom.DefinitionManager.findDefObjectUsingMetadataObject(DefinitionManager.java:2772)
    at oracle.adf.model.binding.DCDataControlConfigDef.findDefObject(DCDataControlConfigDef.java:32)
Checking the output log I can see:
<Jul 29, 2013 2:47:21 PM CEST> <Error> <HTTP> <BEA-101020> <[ServletContext@667149283[app:<App_name> module:<Module> path:/<Path> spec-version:2.5 version:V4.0]] Servlet failed with Exception
oracle.jbo.NoDefException: JBO-25002: Definition oracle.webcenter.search.model.DataControls of type null is not found.
        at oracle.jbo.mom.DefinitionManager.findDefObjectUsingMetadataObject(DefinitionManager.java:2772)
        at oracle.adf.model.binding.DCDataControlConfigDef.findDefObject(DCDataControlConfigDef.java:32)
        at oracle.adf.model.binding.DCDataControlDef.findDefObject(DCDataControlDef.java:377)
        at oracle.adf.model.binding.DCDataControlReference.<init>(DCDataControlReference.java:55)
        at oracle.jbo.uicli.mom.JUApplicationDefImpl.loadDataControlUsage(JUApplicationDefImpl.java:1137)
        Truncated. see log file for complete stacktrace
Caused By: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/oracle/webcenter/search/model/DataControls.dcx"
I have checked similar errors in the forums and tried the solutions purposed but with no success. I do not understand why the application is looking for the DataControls.dcx file inside a standard WC Search library.
Any help would be much appreciated.

Hi Dani,
Eventually I found the problem, it is reported in Oracle Support as Doc ID 1503173.1.
It seems jDeveloper is a bit special when adding Directories to the MAR file. If the whole directory "/oracle" is added, the adf-config.xml introduces the following line:
namespace metadata-store-usage="WebCenterFileMetadataStore" path="/oracle"/
As a result, this diverts all /oracle/... file and class requests to MDS, which causes failures.
So when editing the MAR deployment profile be careful to select the sub-directories under /oracle/webcenter/portalapp/ one by one.
Added to this, I had to perform the cleaning process you suggested to make it work too, otherwise I get a different error...
Final steps are:
1. Undeploy application.
2. Delete MDS partition.
3. Shutdown managed server.
4. Delete /cache and /tmp content for the managed server.
5. Start managed server.
6. Exectute Clean all in jDeveloper.
7. Create a new mar deployment as described in SR 1503173.1.
8. Deploy to EAR file.
9. Deploy new application to managed server using Enterprise Manager.
And it works!
Thanks for your help!

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

Content Search Web Part Error / Control_list.js not found

Hello,
I am trying to use the Content Search Web Part but I receive an error:
Display Error: The display template had an error. You can correct it by fixin the template or by changing the display template used in either the Web Part properties or Result Types;
Template '~sitecollection/_catalog/masterpage/Display Templates/Content Web Parts/Control_List.js not found or has syntax errors. (Load Template;)
I am working on a fresh installation (out of the box) Sharepoint 2013 SP1 on which I have applied the latest CU.
I have checked the folder and I only have one file 'Group_Content.js'. I searched over the web and I found out that I am missing a lot of file in that folder.
Anybody can help me solve this without re-installation of SP?
Thank you!

Yep you are missing a lot of display templates if you only have the one.
Is this the root site collection or a new site-collection under /sites? If it's the root site collection, then I would suggest creating a new web application and site collection and seeing if the problem exists in that. If it does, then you may need to repair/rebuild
your SharePoint installation.
If it's a sub-site-collection and the root site doesn't have that problem, try creating a new site-collection and testing in that. Also ensure that you have publishing features enabled in the site collection.
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

I can not search pdf doc for word or terms in doc, comes back as not found although I know it exists

I have a Mac which prior to upgrading to snow leopard I could search a pdf document for words or terms. Since the upgrade I can not successfully do this search. Although I know the term or word exists in the document the search comes up with Not found. Help!

What you're seeing is ASCII unicode. The OCR of the text in the body of the PDF was either improperly performed or not at all... or the data has been corrupted.
Have you tried opening it with Preview?

Search and display the search value or not found!

i want to input the value and get the result of the value if found or display not found if not found, but the follow coding can not compile, please help me..........
import java.io.*;
public class t4
public static void main (String args[]) throws Exception
     A AB = new A ();
     int j;
int i;
     int x;
do
BufferedReader br =
new BufferedReader(new InputStreamReader(System.in));
System.out.println("Please input");
String sString = br.readLine();
i = Integer.parseInt(sString);
AB.Create(i);
} while (i!= 0);
     System.out.println("");
     BufferedReader br1 =
new BufferedReader(new InputStreamReader(System.in));
System.out.println("Please input no.");
String xString = br1.readLine();
x = Integer.parseInt(xString);
if (AB.Search((int)x)
System.out.println(x);
     else
     System.out.println("Not found");
class A
int k =7;
int g = -1;
     int h = -1;
     int[] abc = new int[k];
     public void Create(int i)
     if ((g+1)==k)
     h=(h+1) % k;
     abc[h]=i;
     else
     g = (g+1) % k;
     abc[g]=i;
public void Printer()
for (int i=0;i<k;i++)
System.out.println(abc);
public boolean Search(int key)
     int i;
     for (i=0;i<7;i++)
if ((int)abc[i] == (int)key)
return true;
return false;

What is the error message that you are getting?

Certain websites i.e.google, yahoo, or other search engines are not found in my server. Why? They were last week. I can only access different countries' google search engines. Error 404 comes up repeatedly. Can anyone explain how to fix this?

search engines and other websites are not found in my server although they were about a week ago. Now Error 404 pops up every time I try to access the websites or search engines. I am not entirely sure when it started exactly, but if there is a way to fix it, I would be very glad to hear it.

Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database.<br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
See also http://kb.mozillazine.org/Error_loading_websites

FAST Search - The object was not found exception.

Hi all - I am getting "The object was not found exception" error for one of my site collection I checked the permissions they are there. Please let
me know how to find more details about error with Item id specified in crawl log.
Also let me know what could be issue for this error. Only one line of error is not helping me to troubleshoot.

Hi Satish,
Do you have alternate access mappings configured for your web application or an incorrect IIS binding? Have you seen these posts?
http://sharepoint.stackexchange.com/questions/22844/object-not-found-error-in-search-service-crawl-logs
http://serverfault.com/questions/130663/sharepoint-server-search-not-crawling
Please remember to click Mark as Answer on the answer if it helps you

Page not found error for search results

I have a site search recipe that worked perfectly on a previous site. I’ve created a new search for a different site following the same recipe. I must be missing something though, because I am getting a page not found error.
Here is the code that worked before:
<form name="catsearchform32891" method="post" action="http://corehog.businesscatalyst.com/Default.aspx?SiteSearchID=3770&PageID=15863972" ><div><input class="search-box" type="text" name="CAT_Search" id="CAT_Search" /><input type="image" src="http://corehog.businesscatalyst.com/images/search-button.png" class="cat_button" /></div></form>
Here is the new site search:
<form name="catsearchform12233" method="post" action="http://greenprideinc.com/Default.aspx?SiteSearchID=3936&PageID=1661214" ><div><input class="search-box" type="text" name="CAT_Search" id="CAT_Search" /><input type="image" src="http://greenprideinc.com/images/search-button-n.png" class="cat_button" /></div></form>
Any suggestions on what I’m doing wrong?

I just noticed one simple thing. I do not know its bug or what.
After sign in the page is getting redirected to :
https://creative.adobe.com/#files
where I am getting error saying that page not found.
I tried to add '/ ' after that and it works.
https://creative.adobe.com/#files/ <<< like this.
I guess some link issue or redirecting issue.

IView not found error when searching

Hi,
We see the below error when trying to do any search on the EP6 SP14 portal. The search function was working, but now we see this error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found:
pcd:portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.basicsearch.
Exception id: 01:29_09/03/06_0003_1786050
See the details for the exception ID in the log file
The search functionality was working last week. The
com.sap.km.basicsearch iview is there.
Any help is greatly appreciated.
Regards,
Rick

Rick,
Goto the Physical location of the iView and see whether the iView exists there. If yes, then right-click on it and select 'Preview' and then try to enter anything and say Search. Do you get the same error message here also.
Or create your own iView from the par(basicSearch iview) and try to search from your own iView also. Let me know the results.
Regards
Vaib

Error "Backend maybe down or Search BAPI not found in repository

Hi,
I am setting up the new 2.0 version of the Sybase Mobile Solution.
I generated all objects on Netweaver Mobile 7.1 and am now about to generate the ESDMA. Here it gives me the error "Backend ABC_TRUSTED maybe down or Search BAPI CRM_SRV_MOBILE_SEARCH not found in local repository."
Any idea what could be missing? I followed the instructions from the installation guide and to me it seems the connection is fine.
Thanks for help.

Thanks, I will try that.
This is the exact error:
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_SRV_MOBILE_SEARCH not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_SORD_TOP not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_SALES_ORDER not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_QUOT_TOP not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_QUOTATION not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_PRODUCT not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_OPPT_TOP not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_OPPT_RISK not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_OPPORTUNITY not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_LEAD not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_HISTORY not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_FS_GENERATOR not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_CREDIT_CHECK not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_BUPA not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_ATP_CHECK not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_ANA_GRAPH_SEARCH not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_MSA_BES_ACTIVITY not available in the backend
Backend IRMCLNT001_TRUSTED maybe down or Search BAPI CRM_ANALYTICS_USR_POS_GET not available in the backend
Assigned Data Object LOG_MBO has no distribution model defined.
Assigned Data Object MAS_FACTSHEET_GENERATOR has no distribution model defined.
Assigned Data Object MAS_ATP_CHECK has no distribution model defined.
Assigned Data Object MAS_CREDIT_CHECK has no distribution model defined.
Assigned Data Object MAS_SALESTEAM has no distribution model defined.
Assigned Data Object MAS_ANALYTICS_GRAPH has no distribution model defined.
Assigned Data Object MAS_USER_POSITION has no distribution model defined.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.
Could not update the local repository for ESDMA 4E2EBF0601C22E2AE10000000A421794, version V9G001.

What should I do when a 404 Not Found nginx blocks me from search engines such as Google, Bing, Yahoo, etc.?

Before I started using Firefox, my default browser was Internet Explorer. That was the start of my problems with "404 Not Found nginx". I can no longer access Google. That was when I converted to using Firefox, in hopes that this problem would go away. It didn't. Again if I typed in "www.google.com" in the URL box, the nearly blank page with "404 Not Found nginx" would show up. I decided to just stick with Firefox but just use "Bing" as my default search engine. Only about a week later the same problem occurred with Bing. I then tried Yahoo, but there was no luck with that either. I currently do not have a search engine to use. Please help.

This helps http://en.kioskea.net/faq/15289-google-nginx-404-error
I had the same problem for 1 month. Finally I found the solution.

"404 Not Found nginx" Certificate Error when performing Google search

Ever since I upgraded to Mavericks on my 2.4 GHz Intel iMac I have started getting occasional errors when trying to access Google sites (search, docs, calendar, YouTube, etc). In Safari, I get the warning that the Certificate is Invalid, and when I view the certificate I see a hierarchy of Certificates: "Class 3 Public Primary Certification Authority > Verisign Class 3 Public Primary Certification Authority - G5 > Verisign Class 3 Secure Server CA - G3 > [and here is the weird part to me] a web domain *other than* google or the site I am visiting, e.g. "www.netflix.com" (I don't have a netflix account), or www.skype.com, or others. Sometimes when I then accept the certificate I am redirected to the site listed in the cert screen, e.g. Netflix, other times I get a screen that says "404 Not Found nginx", other times a screen saying "Invalid URL: The requested URL "/", is invalid. Reference #9.4d290e6b1389574.4981108". I am then not able to access any google sites until some time has passed. This happens in all browsers; it is not specific to Safari.
Other notes:
-My computer's date and time is correct
-I deleted the SystemRoot Certificates for Verisign and the problem went away but not having that certificate created a lot of different problems.
-I reinstalled Mavericks to get the System Root certs back and the problem returned
Thanks for any advice you have.

1. Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
2. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Searched-- not found

Similar Messages

Maybe you are looking for