Searching attibutes in the record mode in Data Manager

Hi,
If i create a new attribute in taxonomy mode,i cannot view it in the corresponding search in the record mode in Data Manager.The particular attribute which i have added is not getting displayed in the attributes in the search pane.If i have to search for that attribute in the record mode what should i do.
Thanks and Regards,
Preethi

hi Preethi,
there are a few differencies between fields and attributres
have a look at table:
Tab. 1 Comparison Fields vs. Attributes
from this document
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d4211fa-0301-0010-9fb1-ef1fd91719b6
for search options based on attributes have a look at the bottom
of the table I mention
hope this will clarify a little bit
Regards,
michal

Similar Messages

  • Is there any way to name the records from a data merge?

    I have a spreadsheet, that has all the names for the images I'm using for a data merge. What I want to do is name the resulting records after the filenames in one of the columns in the spreadsheet. Is there anyway to do this? Or is there some other way to individually name the records from a data merge? I don't have any scripting prowess, so I can't really mess with that. Any help is greatly appreciated! Thanks!

    You merge it along with the others, just like any field. ID cannot do the naming for you during the merge, but most spreadsheets have lots of logic capabilities that should allow you to extract a name for the record from the filename in the column of your choice. The only reason ID knows to find the image instead of writing the filename is that you've used a special name for the field.

  • How to check the records in Master Data Table?

    Hi,
       I am trying to load the Master Data Table using the Flat File.Now how to check the records in Master Data Table?
    I done the following way:
    Info Provider->Info Object->Right Click->Display Data or Maintain Master Data
    But it's not showing the records.It's asking like CID from......To......
                                                                        CID(SID)from.............To.......
                                                                         here CID means customer id(characteristic).
    and showing some settings.
    Please guide me.
    Thanks & Regards

    Hi Sri,
    Go to T- code RSD1 and type your info object name and open the P- table in the infoobject then select execute symbol to see the updated  data in to master data info object.
    regards
    sap

  • Fm to create, modify delimit the records in master data for org mag

    hi,
        There is a fm hr_infotype_operation to create, modify, delimit the records for one infotype of pernrs.
    Like this I want fm through which i can create, modify the records to master data of organisational management (OM). Whatever the infotype i will enter in that fm and data it will create a new record in OM master data. 
              If anybody know this, please tell me.
    thanks & regards,
        Sekhar.

    Hi,
    Try RH_UPDATE_INFTY.
    RH_INSERT_INFTY.
    RH_DELETE_INFTY.
    Regards,
    Dilek

  • Adding New Records Using BPC Data Manager

    Hi All,
    Thanks for reading my post.
    I have a requirement in which file format is as given below
    Account|Category|Time|RptCurrency|Amount|Quantity
    I am able to upload Amount into my application, I need to update Quantity into another account. I have tried options using *NEWCOL(A) with combinations of with and without Header file format. In case of without header my Transformation is as following:
    ============================================================
    *OPTIONS               
    FORMAT = DELIMITED               
    HEADER = NO               
    DELIMITER =                
    SKIP = 0               
    SKIPIF =               
    CREDITNEGATIVE=NO               
    VALIDATE_RECORDS=YES               
    *MAPPING               
    ACCOUNT = *COL(1)               
    CATEGORY = *COL(2)               
    DATASRC = *COL(3)               
    ENTITY = *COL(4)               
    RPTCURRENCY = *COL(5)               
    Time=*COL(6)               
    AMOUNT=*COL(7)               
    *CONVERSION               
    ============================================================
    I need to add another Mapping to read the Quantity coming in the file but moment I do that, BPC Transformation  reports error that Account dimension is already mapped and in second case when I have two columns in the file   with Header, Data manager reports error "DUPLICATE SIGNEDDATA"
    I may end up having another dimension to store quantity, will appreciate your comments which can be give me some hints to fix this issue. 
    Regards,
    Umesh

    Umesh,
    What you are trying to achieve is not standard possible. You have in fact two columns with measure data in it, this is not possible with some workarounds.
    One possibilitie is that you create a ssis package that in fact loads in the file twice, each go with each own transformation/conversion files, the first go will then load in the amounts, the second the quantity. You have to make sure that the second go is a merge instead of a clear and replace.
    Another possibilitie is that you create a ssis that  first load in the delivered file in a staging table, combine the amount and quantity table, dump the records to a tempfile and than load in this file using one transformation/conversion file.
    I have an example package that does the second possibilitie (never looked/used this package myself, just got it in my library), please drop me an email if you want this example.
    Alwin

  • Retrieve the records based on date where date is not stored

    Hi,
    I have one table in Oracle.
    I want to retrieve the records which are added or modified after a particular date & time.(but the table does not contain any column for date & time )
    For example: Product table(pid number,pname varchar2)
    i am entering 10 records on date 21/07/2005
    i am entering 20 records on date 22/07/2005
    i am entering 15 records on date 23/07/2005
    i am entering 30 records on date 24/07/2005
    If i want to retrieve the records added after 22/7/2005
    (ie.) last 45 records
    But the table does not contain any date field.
    How will you know date & time of each record updated in the table.
    If any one knows, help me.
    bye.

    for 9iR2: check out online document of Oracle9i Application Developer's Guide - Fundamentals and search flash back query
    http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96590/adg08sql.htm#10851
    for 10G, flash back feature is enhenced to whole database level, you can still use flash back query though.

  • Script code sample for looping  through the records from xml data file in formCalc script

    Hi
       I have a xml data file which contains a sequence of repeating applicant data like given below
                       US
                       II
                       CEO
                       Mr
                       111111111
                       0000000111
                       GuarantorA
                       111
                       IN
                       11111
                       WILLIAMS1
                       R3
                       KENNETH1
                       City1GU
                       PA
                       1934-03-14
                       [email protected]
                       GU
                       R
                       113 Lazlo LaneCA
                       Suite 3500CA
                       OaklandCA
                       TX
                       11345
                       AL
    I want to assign a textfield with a value based on the value of coap_flag.
    So i need to loop through all the record and check the value of coap_flag and then assign the textfield a value based on that.
    I am new to Adobe livecycle...Please help me how it can be done.
    I have developed something like this
    foreach Item in ($record.applicant[*].coap_flag) do
    test.value=Item
    if(test.value=="MA")then
    concat($record.applicant.first_name,$record.applicant.middle_name)endif
    endfor

    Using the data you posted in the forum, I copied it a couple of times to give multiple records and used this code to extract the different values that you wanted. I had to wrap it in a <root> node that I called root (to make it valid XML). In my case I wrote the extracted values to a field, but in your case you can do whatever you want with them. Note that this was done in javascript:<br /><br />var currentElement;<br />var obj;<br /><br />//Get the nodes below the root node in the dataDom<br />obj = xfa.datasets.data.root.nodes;<br /><br />//Set an initial value for the textField<br />TextField1.rawValue = "The values of the coap_flag are: ";<br /><br />//Loop through the nodes in the obj set <br />for (i=0; i< obj.length ; i++){<br />     //set the currentElement to the 1st child node<br />     currentElement = obj.item(i);<br />     //Check to see if it is an applicant node<br />     if (currentElement.name == "applicant"){<br />          //It is an applican, now find the coap_flag node value and write it to the text field<br />          TextField1.rawValue += "\n" + xfa.resolveNode("xfa.datasets.data.root.applicant[" + i + "]").coap_flag.value;<br />     }<br />}

  • Loop through the records from xml data file in formCalc script

    Hi
       I have a xml data file which contains a sequence of repeating  applicant data like given below
                               US
                                II
                                CEO
                                Mr
                                111111111
                                0000000111
                                GuarantorA
                                111
                                IN
                                11111
                                WILLIAMS1
                                R3
                                KENNETH1
                                City1GU
                                PA
                                1934-03-14
                                [email protected]
                                GU
                                R
                                     113 Lazlo LaneCA
                                     Suite 3500CA
                                     OaklandCA
                                     TX
                                     11345
                                     AL
    I want to assign a textfield with a value based on the value of coap_flag.
    So i need to loop through all the record and check the value of coap_flag and then assign the textfield a value based on that.
    I am new to Adobe livecycle...Please help me how it can be done.
    I have developed something like this
    foreach Item in ($record.applicant[*].coap_flag) do
    test.value=Item
    if(test.value=="MA")then
    concat($record.applicant.first_name,$record.applicant.middle_name)endif
    endfor

    Using the data you posted in the forum, I copied it a couple of times to give multiple records and used this code to extract the different values that you wanted. I had to wrap it in a <root> node that I called root (to make it valid XML). In my case I wrote the extracted values to a field, but in your case you can do whatever you want with them. Note that this was done in javascript:<br /><br />var currentElement;<br />var obj;<br /><br />//Get the nodes below the root node in the dataDom<br />obj = xfa.datasets.data.root.nodes;<br /><br />//Set an initial value for the textField<br />TextField1.rawValue = "The values of the coap_flag are: ";<br /><br />//Loop through the nodes in the obj set <br />for (i=0; i< obj.length ; i++){<br />     //set the currentElement to the 1st child node<br />     currentElement = obj.item(i);<br />     //Check to see if it is an applicant node<br />     if (currentElement.name == "applicant"){<br />          //It is an applican, now find the coap_flag node value and write it to the text field<br />          TextField1.rawValue += "\n" + xfa.resolveNode("xfa.datasets.data.root.applicant[" + i + "]").coap_flag.value;<br />     }<br />}

  • How to extract the record with latest date

    in internal table i a have 10 records, in that for each record only date is changing...so,now the issue is i should extract the record which having the latest date

    try this code -
    data: begin of itab occurs 0,
          name(20),
          add(20),
          bp like sy-datum,
          end of itab.
    itab-name = 'aaa'.
    itab-add = '123'.
    itab-bp = '20061220'.
    APPEND ITAB.
    CLEAR ITAB.
    itab-name = 'bbb'.
    itab-add = '123'.
    itab-bp = '20061219'.
    APPEND ITAB.
    CLEAR ITAB.
    itab-name = 'aaa'.
    itab-add = '123'.
    itab-bp = '20061222'.
    APPEND ITAB.
    clear itab.
    sort itab descending by bp.
    read table itab index 1.
    write: itab.

  • What is the condition to retreive the records between two dates

    Hi,
         I will give START_DATE and END_DATE for a program to retreive the records between these two dates.
        how to write the select query to retreive the records between these two dates.?
        suppose i want to retreive NACHN, VORNA from PA0002.
    then how to write query to retreive nachn, vorna between START_DATE and END_DATE.

    hi,
    Types:begin of ty_pa0002,
              NACHN type PAD_NACHN,
              vorna  type PAD_VORNA,
              end of ty_pa0002.
    Data:it_pa0002 type table of ty_pa0002.
    Parameters:start_date type begda,
                      end_date type  ENDDA .
    select NACHN
              vorna
    from pa0002
    into table it_pa0002
    where begda = start_date
    and  ENDDA = end date.
    Regards,
    Shiva.

  • Transformation in matching mode in data manager

    Hi ,
    Can anyone tell me when should we do trasformation in data manager (matching mode)? How can we do it?
    Can any one provide me example?
    Thanks

    Hi,
       Transformations is a first step that we need to do in matching and merging process in MDM data 
       manager to eliminate the duplicates.
      Generally the same data in different remote systems will be maintained differently according to their
      naming conventions, but it does n't allow us to do deduplication in data manager.
      We need to normalize the data in specific format so that we can  go for deduplication on a specific field.
       To create transformation ,
       Select transformations tab in data manager
       Give name for transformation.
       Select the field on which you want to apply  transformation.
       Create the substitutions .In substitutions we have From means original data and To means destination
       data and Token means whether source data has to be converted in token wise or not.
       After that create rule and include transformation there.
      Hope it helps,
      Reward points,if found useful
    Cheers,
    Narendra.M

  • Not able to see the records in master data

    Hi friends
    My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
    Mouli

    Hi
    Check out your infopackage setting: if its upto PSA or to MD table also
    Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
    Regards
    GSK

  • Query to get the record with latest date

    I have
    ACCOUNT_TABLE
    account_number
    account_event
    event_date
    ACCOUNT_TABLE
    1,Open,12 Jan 2006
    1,Open,13 Jan 2006
    1,Open,14 Jan 2006
    1,Open,15 Jan 2006
    1,Open,16 Jan 2006
    How can I get the latest record(16 Jan 2006) in one sql statement.
    Thx
    m

    if you have more account_event's then...
    SQL> with t as
      2   (select 1 account_number,'Open' account_event,'12 Jan 2006' event_date from dual union all
      3   select 1,'Open','13 Jan 2006' from dual union all
      4   select 1,'Open','14 Jan 2006' from dual union all
      5   select 1,'Open','15 Jan 2006' from dual union all
      6   select 1,'Open','16 Jan 2006' from dual union all
      7   select 1,'Close','17 Jan 2006' from dual union all
      8   select 1,'Close','18 Jan 2006' from dual union all
      9   select 2,'Open','19 Jan 2006' from dual)
    10   select * from t a
    11   where (a.account_number, account_event,a.event_date) in
    12   ((select b.account_number, account_event,max(b.event_date) from t b group by b.account_number,account_event))
    13  order by account_number;
    ACCOUNT_NUMBER ACCOU EVENT_DATE
                 1 Close 18 Jan 2006
                 1 Open  16 Jan 2006
                 2 Open  19 Jan 2006

  • How to search apps in the popular mode only

    I would like to set my search for Apps to Most popular as a default. The other thing is every time I download an app and go back,I have to start at the beginning of the apps search, **** annoying!

    Whoops, spoke to soon. the store was up for a bit and is down again at least from my desktop iTunes.
    The IPAD is apparently working

  • What are the MDM Modes and explain them?

    hi friends,
    What are the MDM Modes
    please explain each mode with examples?
    thanks and regards,
    ramu.

    Hi,
    There are five modes in Data Manager which are as follows:
    1. Record Mode: When Data Manager starts, record mode is opened.It is the primary working view. From here, the content of the data can be
    managed. We perform various operations like
    a. Adding a record
    b. Deleting a record
    c. Searching a record. The search for a record in record mode can be started from the tree view located in the left area of the main window. The search parameters are shown here.
    2. Hierarchy Mode: In this mode, the user of the Data Manager can view and change all hierarchies stored in the repository. The hierarchy table to be edited can be selected here. The tree view displays the tree structure of the hierarchy.
    3. Taxonomy Mode:  The taxonomy determines how records belonging to different categories are defined. Through a taxonomy, an attribute can be attached to a record. These additional attributes are defined for records, which belong to a certain category. An example of this could be personal data, which differs according to the role in the organization, and thus includes additional information.
    The taxonomy mode can only be selected if there is a table of type Taxonomy in the repository.
    4. Matching Mode:  We can define transformations, substitutions, and matching rules u2014 and bundle these rules into matching strategies.
    According to a matching strategy, for example, SAP net weaver MDM will calculate scores for the probability that specific records are duplicates. We can then compare potential duplicates and merge any objects that are in fact repeated.
    In Rules Tab, we set up rules to automate the detection of duplicate master data.
    In Strategies tab, we bundle rules into matching strategies to calculate the probability of duplicates.
    A high matching score indicates that a data entry is likely a duplicate record.
    5. Family Mode: In family mode, all existing records that are already assigned to a category can be subdivided into families. The taxonomy table in which the family definitions are to be stored is selected in the toolbar. Then the family can be selected in the tree view.
    Regards
    Richa

Maybe you are looking for