Searching the long header

Hi,
I am looking for a way to create an automated search that would look into the long header for an IP address.
Anyone has any suggestions??
Thanks very much in advance
Ben

From a few experiments that I performed regarding your question, Apple Mail does not appear search the full long header. Additionally, if you set up a Rule or a condition in a Smart Mailbox having either search "Entire Message" for the IP, it appears it do not search the entire long header either. You might want to look at another e-mail client solution.
However, you also need to be sure that the sender really does have a static IP address. There is a much greater chance that the IP address will change unexpectantly, causing your solution to break frequently. Some factors that can cause their IP address to change includes:
- Their IP is assigned through DHCP each time they connect.
- They send e-mail from more than one computer.
- They use a mobile computer, and get their Internet access from any number of sources.
- The LAN they are directly connected to gets Internet access through multiple connections.
There are more, but typically is a greater chance that the IP address will change than it will be reliably constant.
Don Parsons

Similar Messages

  • HT2500 i cannot seem to get rid of the long header in my inbound e-mails help?

    I am having trouble getting rid of the 10 to 15 lines of long header on my incoming e-mails.  I have gone to mail,messages and clicked long header which removed it but still no sucess.  How would I go about this in rules if there is no other way?  Thanks

    What do you have set for the following?
    mail preferences --> Viewing --> Show Header Detail
    Should be set to Default or None to suppress the full headers.

  • Since updating to 10.7.4 the 'search' no longer works in Address Book.

    Search no longer works in Address Book since I updated the MAC software to 10.7.4.
    Is there a 'fix' ?

    I'm having the same problem. In addition, not only would the Search feature not work, but while in a view with  list on left, card on right, clicking on a contact in the list would not bring up that contact's card on the right. Double clicking on the contact in the list, however, would bring up the card in a separate window.
    First, I exported my Address book and saved the Archive to my desktop (Address Book - 07-25-2012.abbu). I then went to the iCloud System Preferences and deselected Address Book, then re-selected it. The test revealed the problem was still there. I then deleted all my cards (I didn't know how to do this except to drag down through all the contacts on the list on the left and hit delete) and the Contacts list was then empty.
    I tried File>Import, chose my backup file, and the list of contacts returned, but not the contact cards. Still couldn't search either.
    I quit Address Book and from the Go menu in the Finder, selected Go To Folder and pasted in ~/Library/Application Support/AddressBook. This is what I got:
    Because the next instruction was Restore the folder that opens from the backup you made before you started, and because no folder opened, I didn't know what to do.
    So I went to my desktop, double clicked on the backup file, and got this:
    I chose Replace All, and the Contacts List reappeared, but there were still no cards, and Search still didn't work.
    So, I think I tried all your suggestions, but I'm back at square one. If you have any other work arounds I would appreciate help in solving this problem.

  • Spotlight search no longer searches the web?

    Spotlight search was the best in Mavericks - it searched the web. Yosemite no longer searches the web.
    Settings has no spot to add the web search.
    I have to open Safari to do a web search - good grief.
    It was temporarily removed from iOS7 and restored after popular demand.
    I hope this happens with Yosemite. Please.

    After searching help on spotlight and clicking on show me Bing search in preferences, the addition preferences showed up and the web searches began happening. The preferences did not go all the way to 21 when I first looked at them and scrolled down. The web search was definitely not included because so few results were returned as opposed to the identical search now. I'm not sure why the preferences for Bing search were omitted when I first review preferences prior to doing the search of help.
    It appears to now be searching the web and have the ability to include web searches optionally.

  • BAPI : "BAPI_REQUISITION_CREATE" pass the Long Text Field of *Header Note*,

    Hi Experts,
            i am using the BAPI : "BAPI_REQUISITION_CREATE". it' is working Fine.But i need to pass the Long Text Field of Header Note, Item Text, Item Note,Delivery text and Material P.O text through the BAPI.
    Plz,Help me to Achieve this.
    Thanks in Adv.
    V.S.Naidu.

    Below is the code for BAPI_PR_CREATE just go through it and your dbout will be solved
    it has example for multi line header text as well as line items...!
    Hope it helps
    CLEAR GV_BAPIMEREQHEADER.
    MOVE 'NB' TO GV_BAPIMEREQHEADER-PR_TYPE.
    move 'X' To GV_BAPIMEREQHEADER-AUTO_SOURCE.
    CLEAR GV_BAPIMEREQHEADERX.
    MOVE 'X' TO GV_BAPIMEREQHEADERX-PR_TYPE.
    MOVE 'X' TO GV_BAPIMEREQHEADERX-auto_source.
    CLEAR WA_BAPIMEREQITEMIMP.
    MOVE :
    '00010' TO WA_BAPIMEREQITEMIMP-PREQ_ITEM,
    **'001' TO  WA_BAPIMEREQITEMIMP-PUR_GROUP,
    *'TWISTED PAIR CABLE' TO  WA_BAPIMEREQITEMIMP-SHORT_TEXT,
    'C-1030' TO WA_BAPIMEREQITEMIMP-MATERIAL,
    '1000' TO WA_BAPIMEREQITEMIMP-PLANT,
    '100' TO WA_BAPIMEREQITEMIMP-QUANTITY,
    '20091001' TO WA_BAPIMEREQITEMIMP-DELIV_DATE.
    APPEND WA_BAPIMEREQITEMIMP TO GT_BAPIMEREQITEMIMP.
    CLEAR WA_BAPIMEREQITEMX.
    MOVE :
    '00010' TO WA_BAPIMEREQITEMX-PREQ_ITEM,
    'X' TO WA_BAPIMEREQITEMX-PREQ_ITEMX,
    *'X' TO  WA_BAPIMEREQITEMX-PUR_GROUP,
    'X' TO  WA_BAPIMEREQITEMX-SHORT_TEXT,
    'X' TO WA_BAPIMEREQITEMX-MATERIAL,
    'X' TO WA_BAPIMEREQITEMX-PLANT,
    'X' TO WA_BAPIMEREQITEMX-QUANTITY,
    'X' TO WA_BAPIMEREQITEMX-DELIV_DATE,
    'X' TO WA_BAPIMEREQITEMX-EXT_PROC_PROF.
    *EXT_PROC_REF_DOC
    *EXT_PROC_REF_ITEM
    APPEND WA_BAPIMEREQITEMX TO GT_BAPIMEREQITEMX.
    CLEAR EXTRA_FIELDS.
    MOVE '00010' TO EXTRA_FIELDS-BNFPO.
    MOVE '12345678901' TO EXTRA_FIELDS-ZZDANOSPR_NO.
    MOVE 'MUM01' TO EXTRA_FIELDS-ZZPORT.
    MOVE '20100505' TO EXTRA_FIELDS-ZZETD.
    MOVE '20100506' TO EXTRA_FIELDS-ZZETA.
    MOVE '123456789123456789' TO  EXTRA_FIELDS-ZZEXTWG.
    MOVE TEMP TO  EXTRA_FIELDS-ZZrob.
    CLEAR WA_EXTENSIONIN.
    MOVE 'BAPI_TE_MEREQITEM' TO  WA_EXTENSIONIN-STRUCTURE.
    MOVE EXTRA_FIELDS TO WA_EXTENSIONIN-VALUEPART1.
    APPEND WA_EXTENSIONIN TO GT_EXTENSIONIN.
    CLEAR WA_EXTENSIONIN.
    MOVE 'BAPI_TE_MEREQITEMX' TO  WA_EXTENSIONIN-STRUCTURE.
    MOVE EXTRA_FIELDS TO WA_EXTENSIONIN-VALUEPART1.
    APPEND WA_EXTENSIONIN TO GT_EXTENSIONIN.
    CLEAR WA_EXTENSIONOUT.
    MOVE 'BAPI_TE_MEREQITEMX' TO  WA_EXTENSIONOUT-STRUCTURE.
    *MOVE EXTRA_FIELDS TO WA_EXTENSIONOUT-VALUEPART1.
    APPEND WA_EXTENSIONOUT TO GT_EXTENSIONOUT.
    clear wa_PRITEMTEXT.
    MOVE '00010' TO wa_pritemtext-preq_item.
    move 'B01' TO WA_PRITEMTEXT-TEXT_ID.
    MOVE 'THIS IS JUST FOR TEST' TO WA_PRITEMTEXT-TEXT_LINE.
    APPEND WA_PRITEMTEXT TO GT_PRITEMTEXT.
    clear wa_PRITEMTEXT.
    MOVE '00010' TO wa_pritemtext-preq_item.
    move 'B01' TO WA_PRITEMTEXT-TEXT_ID.
    MOVE 'THIS IS THE SECOND LINE' TO WA_PRITEMTEXT-TEXT_LINE.
    APPEND WA_PRITEMTEXT TO GT_PRITEMTEXT.
    BREAK-POINT.
    CALL FUNCTION 'BAPI_PR_CREATE'
    EXPORTING
       PRHEADER                     = GV_BAPIMEREQHEADER
       PRHEADERX                    = GV_BAPIMEREQHEADERX
    *   TESTRUN                      =
    IMPORTING
       NUMBER                       = GV_NUMBER
       PRHEADEREXP                  = GV_PRHEADEREXP
      TABLES
        RETURN                       = GT_BAPIRET2
        PRITEM                       = GT_BAPIMEREQITEMIMP
        PRITEMX                      = GT_BAPIMEREQITEMX
    *   PRITEMEXP                    =
    *   PRITEMSOURCE                 =
    *   PRACCOUNT                    =
    *   PRACCOUNTPROITSEGMENT        =
    *   PRACCOUNTX                   =
    *   PRADDRDELIVERY               =
        PRITEMTEXT                   = GT_PRITEMTEXT
    *   PRHEADERTEXT                 =
        EXTENSIONIN                  = GT_EXTENSIONIN
    *    EXTENSIONOUT                 = GT_EXTENSIONOUT
    *   PRVERSION                    =
    *   PRVERSIONX                   =
    *   ALLVERSIONS                  =
    *   PRCOMPONENTS                 =
    *   PRCOMPONENTSX                =
    *   SERVICEOUTLINE               =
    *   SERVICEOUTLINEX              =
    *   SERVICELINES                 =
    *   SERVICELINESX                =
    *   SERVICELIMIT                 =
    *   SERVICELIMITX                =
    *   SERVICECONTRACTLIMITS        =
    *   SERVICECONTRACTLIMITSX       =
    *   SERVICEACCOUNT               =
    *   SERVICEACCOUNTX              =
    *   SERVICELONGTEXTS             =
    *   SERIALNUMBER                 =
    *   SERIALNUMBERX                =
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    * EXPORTING
    *   WAIT          =
    * IMPORTING
    *   RETURN        =
    WRITE : 'THE PR CREATED IS : -',GV_NUMBER.

  • Firefox start page no longer opens first: "iminent search the web" opens and I can't get rid of it.

    IMBooster, also known as Iminent, and "Iminent Search the Web", has taken over my start-up page. I have tried everything to delete and uninstall all aspects of this unwanted application. It no longer appears anywhere in my computer, but it still opens my Firefox page instead of Google.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen show a blank screen with the heading accessing  iTunes. If I go to the right side and search the store the names drop down. Nothing happens

    When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen shows a blank screen with the heading "accessing  iTunes". If I go to the right side and search the store the "search names" drop down. Then nothing happens. My iTunes store account info is shown on the right side
    I am using a Dell Vostro 3400, with 8 GB RAM, Windows 7 64bit Ultimate OS. ITunes version 10.5? (Latest)
    What I have tried:
    Uninstalled iTunes,
    Removed firewall and protection.
    Re-installed iTunes 64bit (still get the same issue)
    Restarted firewall, added apple.com etc.
    I have created a new user profile to no vail.
    Still the same issue. I can access using my iPod 

    I am having the same problem ever since I upgraded.  Have received four emails from Apple support on the
    issue and nothing has worked.  Unloaded 10.5 and went back to 10.3 which worked fine but it would not allow
    me to sync my Iphone with the ios 5 upgrade.  Went back to 10.5 and sometimes get exactly what you do when
    I try an access the store.  It looks like something is clearly missing.  Have done just about everything I have seen
    on threads but nothing works.  Really need help.

  • HT201285 Why can you no longer search the web from the spotlight search bar?

    I just upgraded to iOS.7 and the spotlight search no longer searches the web. Why would that be?

    Rubies over wrote:
    Why would that be?
    Ask Apple.  Nobody here would know.

  • Transfer data from the PO to the invoice header data in MIRO (user exits)

    Hi.
    We are trying to transfer some basic information from the PO to the invoice header data by the time we process the logistic invoice verification (transaction MIRO).
    The information we want to transfer is:
    1.     PO Text (screen field DRSEG-TXZ01) -
    > should be transferred to Header text field (screen field INVFO-SGTXT) located in the tab u2018Basic Datau2019.
    2.     Purchasing Document Number (screen field DRSEG-EBELN) -
    > should be transferred to Assignment field (screen field INVFO-ZUONR) located in tab u2018Detailsu2019.
    The exits we had listed for this tasks are:
    EXIT_SAPLMR1M_002: Change Proposed Account Assignment
    EXIT_SAPLMR1M_003: Pass On Document Header Data
    EXIT_SAPLMR1M_004: Change the Withholding Tax- and Split Table
    EXIT_SAPLMRMP_010: Analyze Document Header and Item Data
    The second one, EXIT_SAPLMR1M_003, should have stopped at by the time we processed the information, but it didnu2019t.
    Iu2019ve heard EXIT_SAPLMRMP_010 would no longer be functional from version 4.6c.
    Users enter the information in MIRO following this chronological order:
    1.Invoice date
    2.Reference
    3.Purchase order number ---> operation which u201Ccallsu201D the PO to the screen.
    4.Amount
    5.Flag u201Ccalculate taxu201D field (if mandatory)
    6.Tax on sales/purchases code (if mandatory)
    And then they post. Thatu2019s all.
    Weu2019ve tried to get this data from the time we u201Ccallu201D the PO to the screen, just to see if we can get it before we saved the document, and we werenu2019t capable of doing it. The second option is to get the data right after we process the document (post it), so weu2019ve reached bapi INVOICE_UPDATE but we cannot locate the exact place to put the references to the dynpro (although, weu2019re not 100% sure if this bapi would solve the problem).
    Thanks in advance.
    Sebastian

    Hi Sunil.
    Function MRM_INVOICE_CHECK doesn't exist in system 4.6c. Also I've searched for it in ECC 5 and I got the same result. Are you sure about the name of the function?
    From the function group MRMC, I found this:
    MRM_BADI_INVOICE_CHECK    
    MRM_DUPLICATE_INVOICE_CHECK
    I haven't still check them. But for what I know, the second one (...DUPLICATE...) processes a control to avoid a double entry of the invoice, I not sure it will work. I'll let you know.
    Thanks for answering.
    Sebas

  • Changing the Column Header and Hiding the Column dynamically???

    Hi friends..
    I'm new to OBIEE field. I'm working in a OBIEE project that requires to dynamically change the column header, and dynamically hide the column depending on the prompt value.
    I know we can dynamically change the table header using the presentation variable but I couldn't do that same thing with column header.
    I searched some forums that suggest to use java script for this purpose but I'm not able to do the same also. If anyone had same issue before please help.

    toony, I'm not sure it's possible to do all that you want exactly the way you want, but here are some ideas you can pursue.
    To dynamically change column headers without javascript, check this blog out...
    http://oraclebizint.wordpress.com/2008/01/25/oracle-bi-ee-101332-dynamic-column-headers-using-presentation-variables-sets-and-conditional-formatting/
    As far as dynamically hiding a column, I don't think you can do this, but since you don't provide any details on how the PV is supposed to hide a column based on the value, are you talking about hiding a column for one PV value and another (different) column for a different PV value? Or are you talking about hiding one column when a PV has certain values and displaying it when the PV has a different set of values?
    I have managed to create both scenarios via a work-around, but the procedures require some writing so I don't want to put both. Please detail how you want your PV to "hide" a column or columns.
    P.S. I don't think column selectors will do the trick for you. Basically column selectors work like this: Say you have a report using Sales Region ID, Region Name, and Sales. Now let's say you want the user to choose if he/she wants to see annual sales, or quarter sales or weekly sales, etc. The column selector view would allow you to put the various columns (Year Sales, Quarter Sales, Weekly Sales) as an option the user can select. Once selected, the sales figure will change for the time period selected. For an example of how this is done, check out the section in this "Oracle by Example" link.
    Waited too long to publish this... Madan beat me to it, so there is some overlap here...
    http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/saw/saw.html
    Edited by: LC143 on Oct 27, 2008 9:21 AM

  • How to retrieve the long texts from  purchase Info record (ME13)

    Hi,
    How do I retrieve the long texts data from the tab, Texts of the Purchase Info record(ME13).  I want to retrieve the current long texts data(long text1, long text2 long text3, long text4) for a given purchase info record. These long texts points to the structure BRM06I.
    So, now how do I fetch the data from the structure BRM06I. Is there any function module for the same..
    Thanks.

    Hello,
    Texts are stored in tables STXH & STXL (header and item). You can search these tables by selecting Text object = EINA and Text name = Info Rec #. The text ID's you will see are the ID for various texts maintained.
    Cheers !

  • Jonatan R. Aug 1, 2012 5:42 PM Hello, didnt really know hwere to post this guess it more belong under like "computers" generally,    but! For a while...        (-THE LONGER VERSION) : No whait!, let me start where it all began, 2009, a december (erhh.. ii

    Hello, didnt really know hwere to post this guess it more belong under like "computers" generally, 
    but! For a while... 
        (-THE LONGER VERSION) :
    No whait!, let me start where it all began, 2009, a december (erhh.. iii think? Hwatever!) litlle me hwere nearly Totally blank to the computer world. And suddenly it stood there on the table, a shining (it was shining back there) new "hp pavillion entertainment pc" with its smell of fresh plastic mixed hwith the strong smell from the cardboardbox, remember it as if it were yesterday
    ... Since then.... I have today a good solid pc knowing! (at more advance level cmd,bott menu, recovery, blah, blah... NERD!) here at the last awhile, ive prommised to make a lot! A lot of video projects!
    (okay 2, but some big ones!) avchd multilayer 2 hours!!!! 
    So the poor hp laptop -dual core i2 4gb ram, has been begged to it knees! And simply cant handle it of course! and it have just trough time benn loaded with lots of crap, and is extremly noisy, heat, slow, anoying = unusable!
    SO hwat i need is...
        (-THE SHORTER) :
    A computer setup that will EASILY! could handle stuff like that  (avchd, multilayer, 2 hours project) -and simmilar. A total power machine! But Im tired of windows! And ugly cheap looking design! The times have changed and i change with them!
    NOW I WANT APPLE!! 
    But but but... Hwat should i get????
    1. Im NOT a billionare!
    2. I repeat: NOT a billionare!
    3. I also need portability for every day use beyond the hardcore creative editing and use
    AT LAST:
     i saw in front of me this genius plan... With a macbook pro, a tuned one, with as much of ram,cpu,gpu, and everything else as it can posibble have
    -the perfect combination of transportabillity, everydayuse and total power!
    When it gets combine with,
    A cinemadisplay
    A extra keyboard
    And a extra magic mouse
    And this power macbook pro, with screen, mouse, and keyboard i've found a really good offer at.
    MY ACTUAL QUESTION.... :
    Now it is yours turn to please! be creative! Please! Hwat does all you genius heads! think and say?
    WILL A super tuned MACBBOK PRO COMBINED WITH ACCESSORIES, AT ALL, BE ABLE TO REPLACE A STRONG MAC PRO, OR AT LEAST BE MORE THAN ENOUGH FOR REALLY HEAVY STUFF? And if yes, HOW strong actually (ram,cpu,gpu...) will it need to have to be "more than enough"?
    If no, what would all of  you then suggest that is perfect in relation to everything?
    PLEASE ANSWER!!

    Jonatan R. wrote:
    WILL A super tuned MACBBOK PRO COMBINED WITH ACCESSORIES, AT ALL, BE ABLE TO REPLACE A STRONG MAC PRO,
    No,
    the MacPro is the muscle machine and not constrained by power or cooling limitations like the MacBoo Pro is.
    OR AT LEAST BE MORE THAN ENOUGH FOR REALLY HEAVY STUFF?
    If you press the MacBook Pro like a desktop machine, it will blow fans like a hurricane but will do the job eventually.
    The longer you blow fans on a laptop, the sooner it clogs up with crippling dust and shortens the life of the machine.
    You'll need the top end 15" or better, not the 13" as it has no dedicated graphics, only CPU graphics.
    Preferably if you just now getting into video, you should be considering Avid on a Windows 7 tower, it's because Apple has been ignoring the MacPro for hardware updates to improve it and it seems like they don't want to carry it anymore. Also the last Final Cut Pro version had Hollywood up in arms as Apple removed a lot of required abilities to make it more "consumer friendly" which upset the Pro market who likes control.
    Apple is focusing on the consumer computing market and getting away from the "Pro" market which needs the heavier hardware to handle video needs. They stopped selling the X-RAID and the X-Server, so Apple really isn't a "computer" company any longer.
    Sure you can use a MacBook Pro and a external monitor for doing home movies and such occasionally, but if your into serious production you need to consdier other options now.
    There is nothing wrong in getting a MacBook Air and a Windows 7 professional video tower too.

  • Hello  I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.  Following my issue relating to a

    Hello
    I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
    Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
    Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
    The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
    Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
    My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
    This where I stand on this, I have not had my iMac for  almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
    I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
    I trust you will take this complaint seriously and pass it to the relevant department for action.
    Yours sincerely
    Des Withey 
    Sent from my iPad
    On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
    Thanks for contacting us.
    Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
    Case ID:
    Open this case
    Sincerely,
    Apple Support
    Get help online
    Visit Apple Support to learn more about your product, download software updates, and much more.
    Join the conversation
    Find and share solutions with Apple users around the world.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
    All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
    On behalf of Apple Distribution International

    Call Apple Customer Relations - 1-800-275-2273.  Ask politely & firmly that you want to be transferred to Customer Relations.  Tell them exactly what you stated in your post.
    GOOD LUCK!
    These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.  

  • SSRS 2008 R2 report does not print the page header for a html content displaying on multiple pages

    Hi
    I need to display the html content from the database. The html content are quite long and can have content of 3-5 pages. Issue I  am facing is f the record has html content of 3-5 pages, then it does not print the page header (which is a separate tablix) on
    second page onwards.
    Nikesh Shah
    Nikesh Shah

    Hi Nikesh,
    According to your description, I’m not sure the meaning of Page header in your scenario. In Reporting Services, a page header that run along the top of each page, respectively. Headers can contain static text, images, lines, rectangles, borders, background
    color, background images, and expressions. But we couldn’t add tablix in the page header.
    If you are saying report header, a report header consists of the report items that are placed at the top of the report body on the report design surface. They appear only once as the first content in the report. So it cannot repeat in other pages.
    If you are saying tablix header, freezing column headers are different in table and matrix. For more details, please refer to the following thread:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c8ddc1af-1bdf-4e72-8aab-0353c7cc848a/ssrs-report-freezing-row-and-column-while-scrolling-issue?forum=sqlreportingservices
    If there are any misunderstanding, please elaborate the issue for further investigation.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to add the Row count(number of rows in table)  in  the table header?

    Hi,
    I'm having a table. This table is viewed when i click on a search button.
    <b>On the table header it should dynamically display the number of rows in the table, i.e., the row count.</b>
    How to do this? could any one explain me with the detailed procedure to achieve this.
    Thanks & Regards,
    Suresh

    If you want to show a localized text in the table header, you should use the <b>Message Pool</b> to create a (parameterized) message "tableHeaderText" like "There are table entries".
    Next, create a context attribute "tableHeaderText" of type "string" and bind the "text" property of the table header Caption UI element to this attribute.
    Whenever the table data has changed (e.g. at the end of the supply function for the table's data source node), update the header text:
    int numRows = wdContext.node<TableDataSourceNode>().size();
    String text = wdComponentAPI.getTextAccessor().getText
      IMessage<ComponentName>.TABLE_HEADER_TEXT,
      new Object[] { String.valueOf(numRows) }
    wdContext.currentContextElement().setTableHeaderText(text);
    Maybe you want to provide a separate message for the case that there are no entries.
    Alternatively, you can make the attribute calculated and return the header text in the attribute getter.
    Armin

Maybe you are looking for