Security related report in Report Web Part

Hi,
I have a document library hosting 10 reports with item level security. I want to set up only one page with ReportServer Webpart to display one of the reports out of the library according to the report security setting (dynamically). As I can only
choose one (hard coded) report in the web part: how can I do that?
Wolfgang

Hi,
Quote from the link : Report Viewer Web Part on a SharePoint Site
http://msdn.microsoft.com/en-in/library/bb522800.aspx
“You cannot link multiple reports to a single Report Viewer instance, but if you want to group reports together, you can create a dashboard or a Web Part page that embeds multiple Report Viewer Web Part instances on a single page.”
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Similar Messages

Reporting Services Webpart - web part does not auto render consistantly

We are on SharePoint 2010 (integrated with Reporting Services)- on several sites we have added the Reporting Services Web Part and with a saved parameter. The behavior of this web part is not consistent. There are times when I open up a site
and the web part will auto render the report. 5 minutes later I can go into the same site, and the web part does not auto render the report. I have to do edit page, or close and re-open the web site. Has anyone experienced this type of behavior.
I've looked for assistance with this issue on-line cannot find anything that specifically addresses this issue.

Hi Karen,
If the parameters have default values in the report, then the report can be rendered automatically.
For this issue, I recommend to verify the things below:
Does this issue occur when you open the page with the web part in a new tab in the browser or go back to the previous opened tab?
Does this issue occur in the server side or client side?
Please add the site to trusted sites in Internet Explorer to see how it works.
Please change another browser to see how it works.
For narrowing down the issue scope, please test with another report and compare the results.
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Disappearing of Web Parts and a custom List Views containing XSL

Hello!
Recently, on the sites with Web Parts
containing XSL or on List Views (.aspx-pages) containing
XSL a message appears:
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Correlation ID:98bcff3d-5cc0-42b6-819c-41d36a4aa335
And so it is as long as I do not take
certain actions: indicated below as I
struggled with this. In a day or two it
repeats.
Web Parts and List Views without XSL
are displayed normal.
Related LOGs for such Web Parts and List View containing XSL:
Error while executing web part: System.IndexOutOfRangeException: Index was outside the bounds of the array.
at Microsoft.Xslt.MethodCollection.ResolveMethodDef(Int32 tokenNum)
at Microsoft.Xslt.MethodCollection.GetMethodInfo(Int32 methodNumber)
at Microsoft.Xslt.STransform.GetCompiledTransform()
at Microsoft.SharePoint.WebPartPages.BaseXsltListWebPart.LoadXslCompiledTransform(WSSXmlUrlResolver someXmlResolver)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXslCompiledTransform()
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)
Herewith:
1. Updates have been installed on the server
with a further rebooting.
2. No doubt the correctness of XSL:
previously these web parts and list views were displayed.
And it is displayed in SP Designer.
My actions for troubleshooting (a day or two
it reappears):
For Web Parts containing XSL:
- Server rebooting does not help.
- Resaving of Web Part settings
helps (Web Part menu -> Change Web Part -> OK).
- Sometimes resaving of Web Part settings does not help. In this case restarting of Application Pool 'SharePoint - 80' with further
resaving of Web Part settings helps.
For List Views containing XSL:
- Server rebooting does not help.
- Server updating with futher rebooting
helps.
- Restarting of Application Pool 'SharePoint - 80'
helps.

Hi,
According to your post, my understanding is that Web Parts and List Views with XSL were displayed unnormal.
The error message is caused by that the time allowed for doing the XSL transformation was exceeded.
In SharePoint 2010 the XSL transform cannot take longer than 1 second.
There is now a hot fix available from Microsoft to resolve this issue, the solution are at this page:
http://support.microsoft.com/kb/2639184.
In addition, you can install sharepointfoundation2010-kb2597136-fullfile-x64-glb.exe and use the PowerShell
script below to make the change to the Timeout value
If the issue still exists, you can perform an AppPool recycle in IIS.
More information:
http://englando.wordpress.com/2012/01/05/unable-to-display-this-web-part-xsltlistview-and-xsltdataview-web-part-issues-in-ie/
http://hsdhaarsma.blogspot.in/2013/06/indexoutofrangeexception-in.html#!/2013/06/indexoutofrangeexception-in.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Report Viewer Web Part - Override Parameters

We have recently upgraded our SharePoint 2010 farm to SharePoint 2013. When using the report viewer web part, we are now unable to override parameters and have them persist. This functionality was previously working in SharePoint 2010.
A report viewer web part is added to a page
The parameters are loaded in the web part settings, and the option to override the default parameter is selected and populated with the desired value.
After pressing OK, the report loads as expected.
After pressing "Stop Editing" on the page, the report still appears as expected.
If the page is reloaded, the parameters have been removed.
I'm at a loss as to where to start troubleshooting this issue. Any advice is appreciated.
Thanks
PS There are similar issues noted on the forums about issues with SSRS parameters, which appear related to having debug="true" set in the web.config file. I've checked the web.config, and the debug setting is currently set to false.

When you modify the page, do you have personalization enabled? In other words, are you modifying the shared version of the page?
There won't be much harm from removing and reinstalling SSRS. Just make sure to delete your SSRS Service Application beforehand. Also, you will lose any stored credentials that were deployed into your environment.
Dimitri Ayrapetov (MCSE: SharePoint)

Passing Credentials to Reporting Services from a iframe in a web part within Sharepoint

Okay, So I am trying to pass windows authentication from sharepoint into a tab withing a webpart that loads reporting services. Right now the users log into Sharepoint and when they click on the reporting tab within a webpart they are prompted to login again. I can't pass session variables because the reporting services is outside of the webpart and is being hosted within an Iframe. I don’t know if it is possible to impersonate or store the login credentials from Sharepoint temporally and send it to the Reporting Services log in prompt. Any help is greatly appreciated.

Same question here. I have a page viewer web part looing at a SRS report. I don't want to have to maintain security in both SP and SRS

SQL Server Report services web part will cause lost page title

Hello,
I have a SSRS web part in my Sharepoint 2013 page, but I found the page title always lost after report load completed. I have checked the js code by debug, I found this is being caused by internal javascript executed by Sharepoint.
The code as below:
Sys$WebForms$PageRequestManager$_parseDelta(executor) {
>var reply = executor.get_responseData();
the code get pageTitle info is null, so cause page title lost.
Can anyone help please?
Thank you

Hi Brysk,
Is there any difference between the problemaitc page containing the webpart and other working wiki pages for showing the title name in IE tab?
The IE tab should show the information in tag<title> of the page, please check if it is correct for that page (using F12).
Also check if it is related to IE browser compatibility issue.
Thanks
Daniel Yang
TechNet Community Support

SharePoint 2013 SQL Server Reporting Services Report Viewer (Web Part) - IE Tab Title

Hi,
We are using a wiki Library to create page with SQL Server Reporting Services Report Viewer Web Part.
Everything is working great except for the Internet Explorer tab, instead of giving me the name of the Report it is showing the name of the web application. All the other wiki pages is working fine.
Regards,
Social Technet Microsoft.

Hi Brysk,
Is there any difference between the problemaitc page containing the webpart and other working wiki pages for showing the title name in IE tab?
The IE tab should show the information in tag<title> of the page, please check if it is correct for that page (using F12).
Also check if it is related to IE browser compatibility issue.
Thanks
Daniel Yang
TechNet Community Support

Unable to view Report Filters on Excel Services web part

I have an Excel 2010 file with Pivot Charts. I want users to be able to select filters for the pivot charts to modify their chart/report as needed.
This excel file with Pivot Charts is visualized using Excel Services Web Part on SharePoint 2010.
My problem: The Pivot Chart Filters do not appear on SharePoint. They are available when the file is opened in Excel 2010.
Is there a way to have chart/report filters show up on SharePoint (excel services web part)?

As per the article below it seems that Pivot Chart Filtering is not available with Excel services. The article reads
"PivotChart reports are not interactive when displayed in a browser. You cannot filter a PivotChart report directly, but if you interact
with the PivotTable report that supplies data for the PivotChart report, the PivotChart report updates accordingly. This means if you filter the PivotTable report, the PivotChart report updates to show the filtered data set."
Unsupported Features in Excel Services
Though this article is for MOSS 2007 but if you read the following article for SP 2010 it reads "All other unsupported features continue
to behave as they do in Office SharePoint Server 2007 for Excel Services."
http://msdn.microsoft.com/en-us/library/ff595319(v=office.14).aspx
Amit

Files access report from List View Web Part

Hi,
I have a list,inside the list there are some folders and inside the folders there are some files.
This list has been added to the aspx page as a list view web part.
Now our requirement is to generate report on monthly basis of logged in user who accessed folders/files from the webpart.
Is this possible through OOB/customisation please let me know.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
Did you check this link? If not please refer it. They are talking exactly what do you want in your requirement.
http://office.microsoft.com/en-in/sharepoint-server-help/view-audit-log-reports-HA102039795.aspx
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Apply Button not working in Report viewer web part in SP 2013

I have a SSRS report which gets values from SSAS cube, with more than 10 parameters defined in the report. All the parameters are multi-select parameters and the report is deployed in SharePoint 2013 integrated mode.
I created a web page and integrated the SSRS report inside a report viewer web part. All the report parameters are from Performance Point filters. All the PPS filters are connected to SSRS report.
The problem is each and every time the parameter is re-selected(changed) the whole page gets refreshed.
So I added a Apply button, so that the report gets refreshed only after clicking the Apply button. Even after adding the apply button the report gets refreshed on each parameter change.
Can you please let me know why the apply button is not working and possible solutions to overcome this.

Hi,
There's no much similar issues I have found.
I suggest you consider opening a support case with us, provided the sample code for reproduce and version of SQL Servr. You may visit this link to see the various support options that are available to better meet your needs:
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone.

SharePoint - Web Part - SQL Server Reporting Services Report Viewer Error.

Hi,
I was just having a bit of a fiddle with the differen't web-parts available to add on our local SharePoint site, and as one of my tasks is to have a report automatically open when the page is opened i thought i would try to add the web-part 'SQL Server Reporting
Services Report Viewer' just to see the outcome.
Now, I don't much care about viewing the report at this time, but imediately after trying to add the web part i am being displayed with an error and no matter how much i navigate away from the page or close the browser the particular link to the page i was
trying to insert the web-part into now displays an error.
The error simply says 'An unexpsected error has occured' with various 'Correlation ID:' each time.
Now i have a link to other parts or subsites of that SharePoint site and they work just fine, it's just when i try to click on the page where i wanted to put the web-part in it
still comes up with an error. This page just so happens to be the home page so it really does need to be fixed.
Please help!?
Many Thanks,
Plain_Clueless

Hi again,
Sorry for the bother, We have now fixed the issue for the time being.. all that was needed was a simple '?contents=1' at the end of the url which takes you to a menu where you can delete the
necessary web-part that was causing the trouble.
As for actually implementing the report onto SharePoint.. in future i will make Dev pages instead.. and it seems i may need to contact the admin side of building so they configure 'SQL Reporting
Services Report Viewer' properly.
Thanks a lot though!
- A little less Plain_Clueless
Plain_Clueless

Web part created on a subsite for a sharepoint list in another site using sharepoint designer, to show only the subsite's reports. Connection dropping off and showing all the reports

I crated web parts in the sub-sites (we have about 10 subsites) using sharepoint designer from a main list in another site. Then used web part to show only the ubsite's reports - using connection to the main list. Problem is, the connection
is dropping off and showing all the reports on the main list that are confidential. this has happened 3 time lately. Could someone explain why it happens some times? I had to fix it by adding the web part again and connecting it
Thanks, Subathy.

Hi George,
If you want to use a top level site "department" list column in all sub-sites, you can go to top level site and create a
lookup type "Site column" to look up the value from the department list, then all sub-sites can use this lookup type site column created in top level site.
Thanks
Daniel Yang
TechNet Community Support

How to refresh Report viewer web part programatically using C# in SharePoint?

I have used Report viewer web part in SharePoint page, I want to refresh it programmatically. How can I achieve this? I have tried approach mentioned on
http://nicholasfaiello.wordpress.com/2012/12/28/report-viewer-web-part-programmatically-refresh-a-report/ site, but it is not working.

Hi,
How about using JavaScript to perform page reloaded or just trigger the click event of the refresh button with the Report View Web Part? It could be seen as a kind of workaround
for auto refreshing.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b0b6d11d-07c8-4b4d-bd69-ec60e85e0678/sharepoint-report-viewer-web-part-parameter-issue-not-refreshing?forum=sharepointgeneralprevious
http://richmintzbi.wordpress.com/2011/06/21/auto-refresh-ssrs-reports-part-ii/
Best regards
Patrick Liang
TechNet Community Support

SQL Report Viewer Web Part Not displaying Report

I have just completed updating an old report using report builder 3.0. I have added it to SharePoint Designer but have not replaced the old report file.
Any help is greatly appreciated!!
All I did was export the old report from sharepoint designer to my desktop. Then opened it with Report Builder 3.0- made changes to the report and saved it with a different name (for safety in case i break things) and then upload it back to the same place where
the old report was located using SP Designer. I then went back to the site in sharepoint that is displaying the old report, and changed the URL path in the SQL report viewer to the new report.
Now the SQL Report Viewer web part isn't showing anything (blank)

Dear Form Moderator,
This question is already asked in sharepoint forum so please don't move this sharepoint forum. Here is link of thread:
https://social.technet.microsoft.com/Forums/en-US/3796da85-fbb4-4722-a5d0-724859f7d4ae/sql-report-viewer-web-part-not-displaying-report?forum=sharepointgeneralprevious
Here is the one more duplicate thread link in same forum. So either you can merge both OR delete one.
https://social.technet.microsoft.com/Forums/en-US/259d2586-ed4a-4f47-a808-877d4621d9f2/report-builder-30-sql-report-viewer-web-part-not-displaying-report-in-sharepoint?forum=sqlreportingservices
[SharePoint Forum Moderator]
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Crystal Report Viewer in Sharepoint Page Viewer Web Part

In our SharePoint setup, we have a web part that contains links that either hides or shows three other web parts (page viewer web part). When entering the page, the first web part is shown and the other two are "hidden". Clicking on the links will toggle through these three web parts. Link 1 = Web Part One Visible, Web Part Two and Three Hidden. Link 2 = Web Part Two Visible, Web Part One and Three Hidden. Link 3 = Web Part Three Visible, Web Part One and Two Hidden.
Our problem involves the CrystalReportViewer. We have created a page that allows us to open the last successful instance of a report with the viewer. This works correctly when calling the link directly from IE. When we place this link in either the second or third web part, the report does not show. The viewer borders will appear but the report itself will not. If the .aspx is placed in the first part, the report appears without issue. We do not want the .aspx to be called by the first web part and need it to load in one of the other two. We can get the report to show in the other web parts if you right click on the empty space where the report should be and hit refresh.
What do we need to do to get the report to load correctly in either of the two web parts? We have looked at several options and can not get anything to work. We didnt have this issue when using BOE XI R2 with an .asp opening the reports. Please let me know if more info is needed. We are running BOE XI R3.1 currently.
Thanks

We havent tried that. We changed the link in the web part to access an html page that claims that the report is loading. It states in the html that if the page doesnt load to "click here" which redirects to the crystalreportviewer. Its a temp fix for it. One thing we are looking at is the 64 bit version of the Sharepoint integration kit. That may contain a reportviewer webpart.
Thanks for the reply.
Brian

Security related report in Report Web Part

Similar Messages

Maybe you are looking for