See data content in all tables, possible?

Hi, is is possible to see the data content (in all columns) in all tables?
Similar to ALL_TABLES, but I'd like to see the DATA, not the structure.
If it's possible please let me know.
Gracias.

Panamanian wrote:
Yes, that's what I'm looking for.
Too bad.
Why would I need so? because I know in a table I have an email as a record, but there are about 2000 tables, and it would be great to see it's content.
Maybe similar also to USER_SOURCE view.
Gracias anyway. :(If you know what the email address is, the why do you need to look for it in the DB.
If you do NOT know what the email address is, then how will you recognize which address is correct?
What problem are you really trying to solve?

Similar Messages

Deleting the contents of all tables in a schemas

hi ,
can someone tell me if there is a way of deleting the contents of all tables , without dropping any.because the schema is big and just want to empty all tables at the same time.
thanks in advance.

Hi,
>>Will they be enabled after running the script?
Well, of course they need to be re-enabled ... don't you think?
SQL> create table a (id number primary key);
Table created.
SQL> create table b (id number constraint fk_b_a references a);
Table created.
SQL> select constraint_name,status from user_constraints where table_name='B';
CONSTRAINT_NAME                STATUS
FK_B_A                         ENABLED
SQL> truncate table a;
truncate table a
ERROR at line 1:
ORA-02266: unique/primary keys in table referenced by enabled foreign keys
SQL> alter table b disable constraint fk_b_a;
Table altered.
SQL> truncate table a;
Table truncated.
SQL> select constraint_name,status from user_constraints where table_name='B';
CONSTRAINT_NAME                STATUS
FK_B_A                         DISABLED
SQL> alter table b enable constraint fk_b_a;
Table altered.
SQL> select constraint_name,status from user_constraints where table_name='B';
CONSTRAINT_NAME                STATUS
FK_B_A                         ENABLEDCheers
Legatti

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

2LIS_04_P_ARBPL - how this extractor fetching data from which all tables??

Hi
We have one DataSource 2LIS_04_P_ARBPL and we want to know all the tables of origin.
Actually the problem is: this datasource is extracting a blank workcenter
Suppose we have one Process Order 100000 for which this DS is giving us 4 records: out of this 4 records, 1 record is having blank workcenter and that's why we want to know how this DS 2LIS_04_P_ARBPL is extracting data from the tables.
I tried to run RSA3 in debug mode but it couldnt help me out much
Also I ran trace ST05 and tried to find out tables involved,,but this method also failed
I searched in help.sap.com but again I ended up with disappointment:
http://help.sap.com/saphelp_nw04/helpdata/en/6c/61117e6c3911d3b6df0000e8359890/content.htm
As its logistics data source so i used LBWE but at last this mehtod also not worked out.
Request you all to help me out on this issue.
Thanks
Alok

well if it was such a simple things then our extractor will give only 1 record as AFKO/AFPO table returns only 1 record for the given Process order but here we are getting 4 records.
u can try in yr system as well. run RSA3 for same DS and pick any Process order . u will definately find more than 1 entry but AFKO/AFPO will give u one entry , especially the header table AFKO

See a list of all certificates possible?

Hi,
maybe i am a bit naive but i hope that there is a possibility to see all my certificates.
My issue is that i need to create a certificate list with the date of expire of each certificate.
We use Weblogic 10.3. I have access via unix or web interface.
Is there a easy possibilty?
Thanks in advance!

Ann,
In Acrobat Pro 9, go to: File --> Properties... --> Fonts
I recommend that you ask further Acrobat questions in the Acrobat forum where those pros hang out. Thanks.
Neil

How is it possible to output the contents of all annotations to file or text box?

Hello,
I am trying to get the contents of all annotations (except attachments) within a PDF. Creating the Javascript code to enumerate all annotations in the document is not a problem. I am puzzled as to how I can either save the output to a unicode text file (preferable to a filename picked by user) or place it in an on-screen textbox in a dialogue so the user can copy it to the clipboard. As far as I understand, it is possible to generate a new PDF with the output, but I would like the code to work in Adobe Reader also.
Thanks a lot!
Best regards,
Stanislav

Thanks for your reply, George!
What I want to do is to be able to open any document in Reader, open the Addons pane, click a button and see the contents of all annotations in a textbox or pick a filename to save these to hard drive in a custom format? The latter (saving to a user-selected file) would be preferable.
AcroJSGuide points to Adobe Dialog Manager as a way to create user dialogues, but I thought experienced users can point me in the right direction.
Thanks,
Stanislav

How to check the data in a temporary table

Hi,
A procedure inserting data into a temporary table , data exists in the table now. so, how to see the data from the temporary table. Is it possible to see from the sqlplus by selecting, right now i'm not getting any data. .thanks Bcj.

If you are referring to Global Temporary Tables, then the only way to see the contents of the table are to select from the table while connected to the same session that inserted the data into the GTT.
Please note however that there is not a 1 to 1 correspondence between sessions and users (shcemas). A user may be connected to 1 or more sessions, but it is only the session that inserted the records that will be able to view the records.

How to check data in a cluster table?

Hello
I am new to BW and SDN.
I have to see data in a cluster table.
I went to SE11, selected data type as KOMV, it displayed table, but data content button is greyed out.
Can someone please tell me how to view the data?
Thanks
Priya

Hi,
Thanks, I can see the data now.I am expecting that data should display in the 2LIS_VDKON extractor.There are two records for particular condition type.Item 10 and Item 20, but in RSA3, it is showing only one record for Item 20 and not showing for Item 10.
I have cleaned and filled the setup tables, but still no luck.
Can you please guide me, where else to look?
Thanks
Priya

What is the problem with native dynamic sql when counting rows in all table

what is the problem with native dynamic sql when counting rows in all table?Giving an error "table or view does not exist". Thanks.
DECLARE
v_sql_string varchar2(1000);
v_no_of_rows number;
BEGIN
for i in ( select table_name from all_tables )
loop
v_sql_string := ' select count(1) from ' || i.table_name;
dbms_output.put_line( v_sql_string );
--execute immediate v_sql_string into v_no_of_rows;
end loop;
END;

Usually your problem can be described with 'Who cares'. I mean, for what reason do you do this? I doubt that there's a business need to get 100 % accurate answers for this. Normally such things are used to get a picture about the growth of data.
Personally I would prefer to have up-to-date statistics for all tables and just query the number of rows from there. Sufficient for me in < 99 % of all cases.
Just my $ .02...

Is it possible to see all tables in sap

Hi,
I am learning abap and i am interested to know about all tables like Ekko, Ekpo, Eket, Mara, Marc....etc
is there any possibility to find all these tables ...if any one knows kindly tell me.

hi uday,
this code will surely help you Tcode <b>SE85</b> just go through it and you will find all you need and if you want to where your tables are being used you can click where used icon on the screen.
<b>SE85->ABAP Dictionary->database table</b>
you can also find the fields as well as structures,
hope this information will help you.
don't forget to reward points,

Restrict user to see the contents of a transparent table

Hi fnds,
i want to restrict users in seeing the contents of a database table..
ithat is, when they go to se16 and hit enter.. and try to execute F8 button.. it should not show any records and no access should be available to that user...
Can this be possible with auth object - whoever is authorizeed they only shoud see the contents..
how to do this.. this table doenst not have table maintanence -- no SM30 data maintancne..
help me,
thanks
Niraja

This is part of the table definition in the data dictionary (not sure with what release that was introduced, but if you're not on an old system you should probably have it). I.e. in the data dictionary (SE11) on the Delivery and Maintenance tab for the table you have a field Data Browser/Table View Main., which you should set to N Display/Maintenance not allowed. If you check the F1 help on the field you'll get a nice long explanation.
If you don't have this option (on an old release) check out OSS note [26909 - SE16 - Security|https://service.sap.com/sap/support/notes/26909], which explains your other option via authorization object S_TABU_DIS (access control might be a bit too coarse). See also OSS note [546797 - FAQ Data Browser (SE16)|https://service.sap.com/sap/support/notes/546797].
Cheers, harald

Is it possible to import data into an existing table?

Hi.. everyone.
Is it possible to import data into an existing table
by using import utility?
The exported table and the existing table have the same name
and table schema.
I want to append "new data(exported from oracle8.0.5)" to
"an existing partitioned-table" by using "oracle 9i import utility".
Thanks in advance.
Have a nice day.
Ho.

SQL> select index_name
2 from user_indexes
3 where table_name = 'IMPORTPK';
INDEX_NAME
SYS_C007610
SQL> create view importpk_view as select * from importpk;
View created.
SQL> disconn
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Pr
oduction
With the Partitioning, OLAP and Data Mining options
SQL> exit
C:\>exp userid=oracle/oracle tables=importpk
Export: Release 10.1.0.2.0 - Production on Tue Sep 5 08:30:50 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table IMPORTPK 10 rows exported
Export terminated successfully without warnings.
C:\>imp userid=oracle/oracle tables=importpk ignore=y
Import: Release 10.1.0.2.0 - Production on Tue Sep 5 08:31:12 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing ORACLE's objects into ORACLE
. . importing table "IMPORTPK"
IMP-00019: row rejected due to ORACLE error 1
IMP-00003: ORACLE error 1 encountered
ORA-00001: unique constraint (ORACLE.SYS_C007610) violated
Column 1 1
Import terminated successfully with warnings.
C:\>sqlplus/nolog
SQL*Plus: Release 10.1.0.2.0 - Production on Tue Sep 5 08:33:20 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
1.No
Note : if table content primary key and index.
SQL> conn oracle/oracle
Connected.
SQL> create table withoutcons ( no number);
Table created.
SQL> insert into withoutcons select * from importpk;
10 rows created.
SQL> create view withoutcons_view as select * from withoutcons;
View created.
SQL> disconn
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Pr
oduction
With the Partitioning, OLAP and Data Mining options
SQL> exit
C:\>exp userid=oracle/oracle tables=withoutcons
Export: Release 10.1.0.2.0 - Production on Tue Sep 5 08:36:05 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table WITHOUTCONS 10 rows exported
Export terminated successfully without warnings.
C:\>imp userid=oracle/oracle tables=withoutcons ignore=y
Import: Release 10.1.0.2.0 - Production on Tue Sep 5 08:37:17 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing ORACLE's objects into ORACLE
. . importing table "WITHOUTCONS" 10 rows imported
Import terminated successfully without warnings.
2. Yes
If table content no unique constraints
Message was edited by:
user526020

Data Federator: Unioning Multiple Tables into single view possible?

Hi,
I have three different databases with tables containing a portion of the same kind of data and I want to union the three different tables together in Data Federator to present a single logical view that has the complete set of data. Is this possible in Data Federator? How would I go about doing that?
Note: I do not have keys to join the tables together on since it's not simply extending the data in one table with additional data in another table and doing an inner join on a unique key. Instead, for example, there's a customer table for Finance, a customer table for Operations and a customer table for Sales and they all contain the same columns (with maybe slightly different names) and same type of data. I want to effectively union Finance, Operations and Sales together in a federated/virtualized view so applications can just query from that view to get all the customers from the three different databases.
I have been unable to do this so far since Data Federator requires each table in a mapping to have a relationship with the other tables in the mapping.
Thanks for the help.
Kerby

I figured out the original question using one mapping for each table but have a new question now.
Is it possible for an application to use the combined view from Data Federator to write back into the databases?
e.g. have an application use the target table in Data Federator and view the results, and based on that update the data in the underlying database that provides the data for the target table?
Thanks for the help.
Kerby

Would Like to Get Report of Daily Emails In and Out from Members to a DL Exchange version : 2007 I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity is it possible ?

Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?

Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP

AWM dimension mapping - is it possible to load data from two input tables ?

Hello All
I have two tables ProductFamily (parent level) and Products (child level).
I want to load a dimension from these two tables where the parent-child relationships are maintained (I am using AWM).
I created a mapping with these two tables as input, but the data loaded does not maintain the relationships.
So how do I do that? Is it possible to load dimensions where different levels get data from multiple tables?
Is there any type of joiner available in AWM?
thanks
Few Notes:
- I do not want to use OWB here as my data is clean
- In AWM, When I loaded the data from a single view which contained data from both input tables, it worked fine. But this is my worst case option.

You should use the Snowflake Dimension option in the Dimension mapping screen for the Product Dimension (as opposed to the default dimension mapping style - star schema).
This will modify the mapping inputs to include a separate parent level key for each hierarchy/level i.e. for each hierarchy/level (unless topmost level of hierarchy), you need to specify the parent level key in addition to the current level key, code/name/description/other attributes etc.
You can do the mapping in either .... use icons at the top of the mapping screen.
the drag/drop mode by dragging the relational column onto dimension model - hierarchy/level/attribute
-or-
the table expression mapping mode which gives the same effect.. dragging a column onto an attribute sets the expression in <schema>.<table>.<column> format.
HTH
Shankar
Note1: Complete the mapping in one go.. Switching b/w the mapping modes cause the mappings to be reset.
Note2: Assume your data is correct, foreign key to parent level table: ProductFamily exists in child level table: Products.

See data content in all tables, possible?

Similar Messages

Maybe you are looking for