Seeded customization database based

hi all,
I am using seeded customization of MDS.Right now seeded customization is file based....means if i have Browse.jsff then i have browse.jsff.xml for my one of customization layer value.
what i want is browse.jsff.xml should not be .xml file i.e whatever customization i do for browse.jsff should directly go to the database i.e db based MDS repository.
Is it possible to have db based seeded customization.
thanks
Dhiraj

Similar Messages

Automatically add user to a specific database based on the users title

Is there away to automatically distribute users to a database based on their title? My organization has different quotas depending on your job title, so if you are an Outside sales rep you get a 2 GB mailbox, and if you are a Inside sales rep you
get a 1GB mailbox.

You can do that with cmdlet extension scripting agent. You need to do some custom setup but there are some examples in below articles (specially part 3)
Understanding the Scripting Agent
Cmdlet Extension Agents (Part 1)
Cmdlet Extension Agents (Part 2)
Cmdlet Extension Agents (Part 3)

How to customize Database Tables Application Connector to OIM

Hi,
Anybody know whether is it possible to customize Database Tables Connector that it could be used to make reconciliation to any table in OIM schema (not only to USR table, that is default)?
I have reviewed config xml files but did not found any entry that could be used to achieve this.
Thanks in advance,
Maciej.
Edited by: maciej.mac on Oct 12, 2009 11:58 PM

Hi,
The custom DB App table connector is used to reconcile identities or account information from the target tables. So when you create a GTC connector this process will create all OIM objects for you (Resource Object, Process, Recon rules etc).
You need to look into deploymenmt document for 'GTC DBApp Tables Connector'. look into the following link for section : "3 Creating the Connector".
Link : [http://download.oracle.com/docs/cd/E11223_01/doc.910/e11194/create.htm#CIABIJCH]
Remember as not to create this as connector for 'trusted mode'. This connector will replicate all the tables from the target to OIM and reconcile data what you want to these tables. But this data will behave as a 'Account for the User', so you need to make sure that you have some unique matching attribute at the target tables as well to link this account to OIM user.
I recommend you to go thorugh the deployment doc and see what is created in OIM. This will make it more explicit.

Fetch records from Database based on Input value

Hi Experts,
In my mobile application, I have designed one input field with F4 help or input assist. I need to fetch records from database based on that input and need to display records in table.
My question is:
How to fetch the records from database/back end based on the input value and display them as table format as we are doing in SAP ABAP?
Here, I need to fetch the records based on input value available in the UI screen and pass that value to gateway, fetch the records from database and need to bind with table in SAPUI5.
Kindly share the whole process flow with sample code for this requirement. Hope I have explained the requirement in detail.
Thanks In Advance..
Regards,
Arindam Samanta.

Hi,
Try something like this.
In this, I am passing From date, To date, RelGrp, RelStr, Uname as input. Then I am storing those values in variables and passing this data in Odata request.
OData.read({ requestUri: "http://xxxx:8000/sap/opu/odata/sap/Z188_PO_SRV/pos?$filter=Docdate le datetime'"
                + todateformat+"T00:00:00' and Docdate ge datetime'"
                + fromdateformat+"T00:00:00' and RelGrp eq '"
                + relcode +"'and RelStr eq '"
                + relstg +"'and Uname eq '"
                + username+ "' "},
function (data) {
console.log(data);
When we are giving correct inputs it will goes to Success function and get the data from back end.
In console we can see the data.
Hope this will helps to you.
Thanks&Regards
Sridevi

Seeding multiple databases with single Entity Framework context

I am developing a single-instance, multi-tenant web application, with a SQL database using Entity Framework 6 Code-First.
I want to have a separate database for each client, generated from the same EF models, with a single DbContext. The database to connect to will be determined by the subdomain that the client is using the web app from.
This seems to work fine and the correct database is connected to depending on the subdomain. However my issue is seeding the databases with data. This is the code I have:
foreach (var connString in ConfigurationManager.ConnectionStrings.Cast<ConnectionStringSettings>()))
Configuration.PerformDatabaseMigration(connString.Name);
This then calls the PerformDatabaseMigration method:
public class Configuration : DbMigrationsConfiguration<DataContext>
public Configuration()
AutomaticMigrationsEnabled = false;
AutomaticMigrationDataLossAllowed = false;
public static void PerformDatabaseMigration(string connStringName)
var databaseInitialiser = new Configuration { TargetDatabase = new DbConnectionInfo(connStringName) };
var dbMigrator = new DbMigrator(databaseInitialiser);
dbMigrator.Update();
protected override void Seed(DataContext context)
base.Seed(context);
var superAdmin = new User { Id = 1, UserName = "SuperAdmin" };
context.Users.AddOrUpdate(superAdmin);
The issue is that when seeding this data for the second database, the context passed into the Seed method already has the admin user added to the `DbSet<User>` property of the context, even though the context is for the second databse connection, not
the first. It appears that the context is not being cleared from seeding the first database, and so I receive a `DbUpdateException`, as my User.Username field is a unique index.
Cannot insert duplicate key row in object 'dbo.Users' with unique index 'IX_UserName'. The duplicate key value is (SuperAdmin).\r\nThe statement has been terminated.
public class User : ModelBase, IUserIdentity, IPrincipal, IIdentity
[Index(IsUnique = true)]
[Required]
[StringLength(40)]
public string UserName { get; set; }

Hello Attune,
>>This seems to work fine and the correct database is connected to depending on the subdomain. However my issue is seeding the databases with data.
Is that you firstly create these databases and then call the PerformDatabaseMigration method to seed these database with data? Do you have a try to seed these database data when creating the database with AutomaticMigrationsEnabled = true; with your provided
configuration class, I tested it and it could work as seeding same data to different database:
internal sealed class Configuration : DbMigrationsConfiguration<CFs.CFContext>
public Configuration()
AutomaticMigrationsEnabled = true;
public static void PerformDatabaseMigration(string connStringName)
var databaseInitialiser = new Configuration { TargetDatabase = new DbConnectionInfo(connStringName) };
var dbMigrator = new DbMigrator(databaseInitialiser);
dbMigrator.Update();
protected override void Seed(CFs.CFContext context)
base.Seed(context);
var superAdmin = new ApplicationUser() { ApplicationUserID = 1, FirstName = "", LastName = "" };
context.ApplicationUsers.AddOrUpdate(superAdmin);
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Seed mailbox database copy through replication network (DAG members on different subnets in different sites)

Good afternoon
I currently operate a two node DAG in our primary site supporting one mailbox database. I plan to introduce a third DAG node in our datacenter which is in a different Active Directory site. Both current DAG members replicate over a dedicated replication
network to keep the traffic separate from the MAPI traffic. The third DAG member will also have a dedicated replication network adapter (of course, on a different subnet). Ideally I would like to seed the database at a time of my choosing, rather than at the
moment I add the mailbox database copy (I know how to achieve this), but I would like to specify which network the data replicates over.
According to the following (see below link) under the 'Seeding and Networks' section as my two DAG members will be on different subnets in different sites Exchange will make the decision to use the MAPI network adapters of the target and source server.
'If the source server and target server are on different subnets, even if a replication network that contains those subnets has been configured, the client (MAPI) network will be used for seeding.'
http://technet.microsoft.com/en-us/library/dd335158%28v=exchg.150%29.aspx
Am I able to force Exchange to use the replication network adapters of both source and target server when I initiate the seeding process? I have a 200+ GB mailbox database that will need to replicate over a 100Mbps internet connection to our secondary
site and I would like to keep that traffic to the replication network I have configured.
Any insight would be helpful.

Hi,
If you want to specify the networks for seeding, you can use the
Network parameter when running the
Update-MailboxDatabaseCopy cmdlet and specify the DAG networks that you want to use.
If you don't use the Network parameter, then the system uses the following default behavior for selecting a network to use for the seeding operation:
If the source server and target server are on the same subnet and a replication network has been configured that includes the subnet, the replication network will be used.
If the source server and target server are on different subnets, even if a replication network that contains those subnets has been configured, the client (MAPI) network will be used for seeding.
If the source server and target server are in different datacenters, the client (MAPI) network will be used for seeding.
So please use the Update-MailboxDatabaseCopy cmdlet with
NetWork parameter to specify which DAG network should be used for seeding.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Choosing the records to save in a database based block

Hi everybody,
I'm working with oracle 10g forms builder, I have a database based block.. in which I'll populate a number of records retrieved from a cursor. In that block, I have a non database item which a checkbox.
The user can select the records he wants to save by setting the checkbox to check.
Only the selected records should be checked.
Can anyone please help me implementing that.
Thanking you all in advance.
Cheers.

Commit processing in Forms is an all or nothing process. You cannot pick and choose which records will be commited during a Commit_Form or Commit call. Based on your description, I don't see why you would need to use the checkbox to keep track of which records are new since you state that you add the records through a cursor and then to save them. Forms already keeps track of which records were queried into a block and which records are new so a simple call to Commit_Form will accomplish what you want without the need to manually keep track of which records are new.
Hope this helps,
Craig
If a response is helpful or correct, please mark it accordingly.

What is HADR SEEDING TEST database in High availability server?

Hi All,
Our servers belongs to HA. Now, we could see a db like "HADR SEEDING TEST" has been created in our server.We don't know when was it created. How is it getting created and
what is it? Will it make any error if we drop this db?
Thanks,
Julie

I could find an answer for this question.
The db "HADR Seeding Test " will get created when creating an Availability Group in SQL Server 2012 using the New Availability Group Wizard in SQL Server
Management Studio.
Please refer the below link
https://www.sqlskills.com/blogs/jonathan/the-availability-group-wizard-and-the-hadr-seeding-test-database/
Thanks,
Julie

Registering MDS Repository (Database based) with IntegratedWebLogic server

Hi,
I am currently using Oracle JDeveloper 11g Rel 1 (11.1.1.2.0) (JDeveloper + ADF) to create a rule-enabled non-SOA Java EE application with Oracle Business Rules. Please find below the steps I have followed
1. Created rules in an Oracle Business Rules dictionary using an XSD schema.
2. Created a servlet that uses Oracle Business Rules
3. Created a html page to get the input and to submit the data to the servlet.
I wanted to deploy the application on to integratedWebLogic Server. Before deploying the application, I have installed Repository Creation Utility (RCU) and create a database-based MDS Repository using RCU.
I understood from the documentation that before I can deploy an application to MDS Repository, I should register the repository with the Oracle WebLogic Server domain. To perform the same, firstly I have started my integratedWebLogic Server instance and navigated to the integratedWebLogic Server admin console. In the Default Domain, I do not see an option to register metadata database repository.
Please let me know if I had to download any additional components to register the repository with the IntegratedWebLogic Server domain. Appreciate any help/suggestions in this regard.
Thanks
Sanil.M

I solved this problem by running it via
wlst registerMDSRepository.py

Database based helpset

Is it possible to make a database based helpset to dynamically display the contents from the database?
How extendable OHW is and where could I get some more information on extending the help system?

We have recently release Oracle Help 5.0.
Documentation is available here:
http://www.oracle.com/technology/tech/java/help/index.html
Regards, Maria

Repository database based

Hi all,
are there any plans to introduce a database based repository instead of using XML.
Thanks in advance for the answer
Regards

user589812 wrote:
Hi Friends.
i use below command based on oracle document
Start the Management Repository database instance:
ORACLE_HOME/bin/sqlplus /nolog
SQL> connect SYS as SYSDBA
SQL> startup
However, it always ask me to enter a password.
But when my sr. dba type above line. she can state database with password prompt.
So are there some configuration or my computer account ( log into network system) setting issue?
How to fix it?
I think it is very useful when start a died database or instance down.
i use oracle 10gR2 and R4 in window 2003
Thanks
JimLooks to me as if your Sr. DBA has her os account as a member of the DBA group, and you don't. Have you asked your Sr. DBA why she can log on like this and you can't?
Edited by: EdStevens on Dec 22, 2008 12:57 PM

Can not create Database-based MDS connection

Hello Dear Oracle Support,
I am trying to use MDS to share some common dvm files. First step, I want to create a database based MDS connection but failed.
My SOA schema is JDEV_SOAINFRA. When I test my Database based MDS connection, I got ORA-01031: insufficient privileges. What privileges I need to grand to MDS schema?
I am using JDEV_MDS as username to establish MDS connection.
Thank you for any suggestion and/or information,
Alena Li

Hello Alena!
If you want to wait the answer from Oracle Support here.. you'll need a lot of patience.
Is the corresponded Database Connection test succeed?
If it also fails that, I think, your JDEV_MDS user (schema) lack of the CONNECT privilege.
A question to you - how did you created this schema?
You should use RCU to create the schemes for SOA Suite (and other Oracle Middleware).
The RCU creates the schemes with all necessary structures (tables) and grants.
Hope this helps,
Oleg

Customization Class in seeded customization

hi all,
i am using seeded customization.can anyone tell me
1. when the customization class gets called?
2.how many times customization class's getValue method gets called and on what basis it gets called??
plz help
thanks
Dhiraj

hi all,
i am using seeded customization.can anyone tell me
1. when the customization class gets called?
2.how many times customization class's getValue method gets called and on what basis it gets called??
plz help
thanks
Dhiraj

Need info on database based saved search in ADF

Hi All,
I am using jdev 11.1.1.6
i have implemented database based saved search in my adf application.
But after implementing it i am facing more performance related issues in my application.
The page takes lot of time to load along with the previously saved results. Sometime the page is not responding even after a loading the results.
Is there any option such that, i can save only the search criteria's alone instead of saving the result also for each saved searches.
I assume ADF is querying separately for each saved search criteria's which is taking lot of time to load initially. So restricting this auto query will help to load the page quickly.
some one please tell me ideally how ADF will behave in saved search and how to implement saved search based on DB without any performance issue.
Regards
Siva

We are also encountering the same . Once we save criterias and set any of the saved criterias as default, then its not allowing us to select any other criterias or personalize existing criterias.
we are using ADF 11.1.1.5 And we implemented saved search using accross sessions and storing the values in MDS by Running RCU in EM

Seeded Customization Dependencies

What are the dependencies of 1) using seeded customizations and 2) using MDS for storing seeded customizations.
By dependencies, I mean what Java servlet/application containers, et al, are supported? I know that even Tomcat is supported for normal ADF applications, but was wondering how free our customer is in choosing a deployment platform.

Only WLS is supported so far.

Seeded customization database based

Similar Messages

Maybe you are looking for