Seeing traffic on both standby and primary servers in a serverfarm
Hi,
Is it normal to see traffic on the secondary server in a serverfarm like the below output.
If its secondary it shouldnt be recieving any traffic until the primary goes down or offline.
rserver: 192.168.10.40
192.168.10.40:8000 8 OPERATIONAL 3 118169 284
rserver: 192.168.10.41
192.168.10.41:8000 8 STANDBY 0 23798 33
Thanks
you had connections but not actually since the current counte is at 0.
Maybe the primary went down ?
Did you check the log ?
The 'show probe detail' and 'show rserver detail' ?
Gilles.
Similar Messages
-
RA-12514: TNS:listener does not in 11g Standby and Primary
Hi,
We are under process of creating active database in Linux,when i am trying to connect to auxiliary database from primary , i am hitting below error, any ideas.
rman target sys/oracle@adg auxiliary sys/oracle@adg1
I am able to do tnsping from both servers.
from standby
[oracle@adg1 admin]$ tnsping adg
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 18-AUG-2011 18:49:15
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = adg.xxxx.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = adg.xxxx.com) (UR=A)))
OK (0 msec)
[oracle@adg1 admin]$ tnsping adg1
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 18-AUG-2011 18:49:15
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = adg1.xxxxcom)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = adg1.xxxx.com) (UR=A)))
OK (0 msec)
[oracle@adg1 admin]$
From Primary:
========
[oracle@adg admin]$ tnsping adg
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 19-AUG-2011 10:06:29
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = adg.xxx.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = adg.xxxx.com)(UR=A)))
OK (10 msec)
[oracle@adg admin]$ tnsping adg1
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 19-AUG-2011 10:06:29
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = adg1.xxx.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = adg1.xxx.com) (UR=A)))
OK (0 msec)
[oracle@adg admin]$
================================
standby listener.ora
[oracle@adg1 admin]$ cat listener.ora
# listener.ora Network Configuration File: /u01/app/11.2.0/grid/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = adg1.xxx.com)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ADG)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(SID_NAME = ADG1)
standby tnsnames.ora
[oracle@adg1 admin]$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/11.2.0/grid/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ADG1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = adg1.xxx.com)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = adg1.xxx.com) (UR=A)
ADG =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = adg.xx.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = adg.xxx.com) (UR=A)
[oracle@adg1 admin]$I am trying to create active database from standby, how ever its failing with below error, any ideas..?
Here is RMAN error log.
ADG: Primary
ADG1:Standby
==============
Recovery Manager: Release 11.2.0.1.0 - Production on Tue Sep 6 03:26:09 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect target *
2> connect auxiliary *
3> run {
4> allocate channel prmy1 type disk;
5> allocate channel prmy2 type disk;
6> allocate channel prmy3 type disk;
7> allocate channel prmy4 type disk;
8> allocate channel prmy5 type disk;
9> allocate auxiliary channel stby1 type disk;
10> duplicate target database for standby from active database
11> spfile parameter_value_convert 'adg','adg1'
12> set db_unique_name='adg1'
13> set standby_file_management='AUTO'
14> set db_create_file_dest='+DATA'
15> set db_recovery_file_dest='+DATA'
16> set DB_RECOVERY_FILE_DEST_SIZE='8G'
17> set control_files='+DATA/ADG1/controlfile/control01.ctl'
18> set log_archive_max_processes='5'
19> set fal_client='adg1'
20> set fal_server='adg'
21> set log_archive_config='dg_config=(adg1,adg)'
22> nofilenamecheck
23> ;
24> }
25>
connected to target database: ADG (DBID=1317755151)
connected to auxiliary database: ADG1 (not mounted)
using target database control file instead of recovery catalog
allocated channel: prmy1
channel prmy1: SID=29 device type=DISK
allocated channel: prmy2
channel prmy2: SID=22 device type=DISK
allocated channel: prmy3
channel prmy3: SID=156 device type=DISK
allocated channel: prmy4
channel prmy4: SID=152 device type=DISK
allocated channel: prmy5
channel prmy5: SID=148 device type=DISK
allocated channel: stby1
channel stby1: SID=96 device type=DISK
Starting Duplicate Db at 06-SEP-11
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/orapwadg' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/orapwadg1' targetfile
'+DATA/adg/spfileadg.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileadg1.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileadg1.ora''";
executing Memory Script
Starting backup at 06-SEP-11
Finished backup at 06-SEP-11
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileadg1.ora''
contents of Memory Script:
sql clone "alter system set audit_file_dest =
''/u01/app/oracle/admin/adg1/adump'' comment=
'''' scope=spfile";
sql clone "alter system set dispatchers =
''(PROTOCOL=TCP) (SERVICE=adg1XDB)'' comment=
'''' scope=spfile";
sql clone "alter system set log_archive_dest_1 =
''Location=/u01/archvie VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=adg1'' comment=
'''' scope=spfile";
sql clone "alter system set log_archive_dest_2 =
''SERVICE=adg11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=adg1'' comment=
'''' scope=spfile";
sql clone "alter system set db_unique_name =
''adg1'' comment=
'''' scope=spfile";
sql clone "alter system set standby_file_management =
''AUTO'' comment=
'''' scope=spfile";
sql clone "alter system set db_create_file_dest =
''+DATA'' comment=
'''' scope=spfile";
sql clone "alter system set db_recovery_file_dest =
''+DATA'' comment=
'''' scope=spfile";
sql clone "alter system set DB_RECOVERY_FILE_DEST_SIZE =
8G comment=
'''' scope=spfile";
sql clone "alter system set control_files =
''+DATA/ADG1/controlfile/control01.ctl'' comment=
'''' scope=spfile";
sql clone "alter system set log_archive_max_processes =
5 comment=
'''' scope=spfile";
sql clone "alter system set fal_client =
''adg1'' comment=
'''' scope=spfile";
sql clone "alter system set fal_server =
''adg'' comment=
'''' scope=spfile";
sql clone "alter system set log_archive_config =
''dg_config=(adg1,adg)'' comment=
'''' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set audit_file_dest = ''/u01/app/oracle/admin/adg1/adump'' comment= '''' scope=spfile
sql statement: alter system set dispatchers = ''(PROTOCOL=TCP) (SERVICE=adg1XDB)'' comment= '''' scope=spfile
sql statement: alter system set log_archive_dest_1 = ''Location=/u01/archvie VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=adg1'' comment= '''' scope=spfile
sql statement: alter system set log_archive_dest_2 = ''SERVICE=adg11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=adg1'' comment= '''' scope=spfile
sql statement: alter system set db_unique_name = ''adg1'' comment= '''' scope=spfile
sql statement: alter system set standby_file_management = ''AUTO'' comment= '''' scope=spfile
sql statement: alter system set db_create_file_dest = ''+DATA'' comment= '''' scope=spfile
sql statement: alter system set db_recovery_file_dest = ''+DATA'' comment= '''' scope=spfile
sql statement: alter system set DB_RECOVERY_FILE_DEST_SIZE = 8G comment= '''' scope=spfile
sql statement: alter system set control_files = ''+DATA/ADG1/controlfile/control01.ctl'' comment= '''' scope=spfile
sql statement: alter system set log_archive_max_processes = 5 comment= '''' scope=spfile
sql statement: alter system set fal_client = ''adg1'' comment= '''' scope=spfile
sql statement: alter system set fal_server = ''adg'' comment= '''' scope=spfile
sql statement: alter system set log_archive_config = ''dg_config=(adg1,adg)'' comment= '''' scope=spfile
Oracle instance shut down
released channel: prmy1
released channel: prmy2
released channel: prmy3
released channel: prmy4
released channel: prmy5
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/06/2011 03:26:19
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-01031: insufficient privileges
Recovery Manager complete.
Here is alert.log error.
=============
*** 2011-09-06 03:20:24.156
Redo shipping client performing standby login
*** 2011-09-06 03:20:24.200 4539 krsu.c
Logged on to standby successfully
Client logon and security negotiation successful!
Error 16058 attaching RFS server to standby instance at host 'adg1'
Error 16058 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'adg1'
ORA-16058: standby database instance is not mounted
*** 2011-09-06 03:20:24.205 4132 krsh.c
PING[ARC3]: Heartbeat failed to connect to standby 'adg1'. Error is 16058.
*** 2011-09-06 03:20:24.205 2747 krsi.c
krsi_dst_fail: dest:2 err:16058 force:0 blast:1
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1034 and errmsg is 'ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1034 and errmsg is 'ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1034 and errmsg is 'ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
*** 2011-09-06 03:26:24.324 4132 krsh.c
Error 1034 received logging on to the standby
*** 2011-09-06 03:26:24.325 869 krsu.c
Error 1034 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'adg1'
Error 1034 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'adg1'
ORA-01034: ORACLE not available
*** 2011-09-06 03:26:24.325 4132 krsh.c
PING[ARC3]: Heartbeat failed to connect to standby 'adg1'. Error is 1034.
*** 2011-09-06 03:26:24.325 2747 krsi.c
krsi_dst_fail: dest:2 err:1034 force:0 blast:1 -
Logical standby and Primary keys
Hi All,
Why primary keys are essential for creating logical standby database? I have created a logical standby database on testing basis without having primary keys on most of the tables and it's working fine. I have not event put my main DB in force logging mode.I have not event put my main DB in force logging mode. This is because, redo log files or standby redo logfiles transforms into set of sql statements to update logical standby.
Have you done any DML operations with nologging options and do you notice any errors in the alert.log? I just curious to know.
But I wanted to know that, while system tablespace in hot backup mode,In the absence of both a primary key and a nonnull unique constraint/index, all columns of bounded size are logged as part of the UPDATE statement to identify the modified row. In other words, all columns except those with the following types are logged: LONG, LOB, LONG RAW, object type, and collections.
Jaffar -
Is there any impact that apply Oracle CPU on standby and primary DB
We plan to apply Oracle April CPU on standby DB at this weekend. Then apply the same patch on primary DB next weekend. If I apply the patch on standby, then enable redo apply between primary and standby, is there any impact on primary DB. Theoretically, I don't think so. However, both DBs are production. I want to make sure there is no any impact by applying CPU in different time. Otherwise, I have to apply both DBs at the same time. Please advise. Thanks in advance.
853153 wrote:
I hope you read other people's post carefully. Don't pretend yourself is expert so that you can say whatever you want to say. This is the tech forum for Oracle technical people to ask question, seek help and so on. How do you know I didn't review document 278641.1 before I asked my question. Document 278641.1 only provide info on how to apply patch on primary and standby. Didn't say anything about applying the same patch on both DBs with data Guard at the different time. I just want to make sure If I apply patch on both DBs with one week difference, will this affect my primary database? Is there anything wrong here. If you paly in this forum as expert, please help people, not just look down people.
I suggest you review [url http://www.catb.org/~esr/faqs/smart-questions.html]How To Ask Questions The Smart Way.
When you ask for help, state the platform, operating system, Oracle version and patch level, no matter whether it seems important to the question or not. It most often is important. You may not know the difference between Itanium and PA-RISC, but that is important for Oracle and important for someone doing administrative work on an Oracle database to know. You should also learn to search the internet for answers to common questions. Everyone here wants to help, but few want to spoon-feed.
When you have any kind of standby, that constrains what you can do to a primary, if you want the standby to work properly. You need to understand how things get from one to the other, and how to decide when to simply rebuild the standby from scratch - and that decision is based on your configuration and requirements. You don't want to be in some undefined configuration for any period of time. -
Hi,
in 10g R2 , dataguard on unix HP
when connected to standby ,how can we find where is primary server ?
or :
when connected to primary ,how can we find where is standby server ?
Thank you.from the primary; look athe parameter log_archive_dest_x you'll see something like:
SQL> select name, value from v$parameter where name like '%log_ar%' ;
log_archive_dest_2
SERVICE=TEST_STANDBY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_
UNIQUE_NAME=test DELAY=120
tnsping TEST_STANDBY and here is your standby.
From the standby; query if fal_server is configured:
SQL> select name, value from v$parameter where name='fal_server';
NAME VALUE
fal_server TESTPROD
tnsping TESTPROD and here is your primary. -
How to verify that standby and primary are working correctly or not
Hi,
Oracle Version : 10.2.0.1.0
OperatingSystem : WindowsXp
I have configured a stand by database on my local database.Here i would like to know weather by stand by is configured correctly and working fine are not.
Please help me.
Thank & Regards
Poorna Prasad.Hi,
When i issue these statements in my primary database the output is like this
SQL> SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
SEQUENCE# FIRST_TIM NEXT_TIME
169 19-AUG-09 20-AUG-09
170 20-AUG-09 20-AUG-09
171 20-AUG-09 20-AUG-09
172 20-AUG-09 20-AUG-09
173 20-AUG-09 20-AUG-09
174 20-AUG-09 21-AUG-09
175 21-AUG-09 21-AUG-09
176 21-AUG-09 22-AUG-09
177 22-AUG-09 22-AUG-09
178 22-AUG-09 23-AUG-09
179 23-AUG-09 23-AUG-09
SEQUENCE# FIRST_TIM NEXT_TIME
180 23-AUG-09 24-AUG-09
180 23-AUG-09 24-AUG-09
181 24-AUG-09 24-AUG-09
181 24-AUG-09 24-AUG-09
182 24-AUG-09 24-AUG-09
182 24-AUG-09 24-AUG-09
183 24-AUG-09 24-AUG-09
183 24-AUG-09 24-AUG-09
184 24-AUG-09 24-AUG-09
184 24-AUG-09 24-AUG-09
185 24-AUG-09 24-AUG-09
SEQUENCE# FIRST_TIM NEXT_TIME
185 24-AUG-09 24-AUG-09
186 24-AUG-09 25-AUG-09
186 24-AUG-09 25-AUG-09
187 25-AUG-09 25-AUG-09
187 25-AUG-09 25-AUG-09
188 25-AUG-09 25-AUG-09
188 25-AUG-09 25-AUG-09
189 25-AUG-09 25-AUG-09
190 25-AUG-09 25-AUG-09
31 rows selected.
SQL> select * from v$dataguard_status;
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Informational 0 1 0 NO 25-AUG-09 ARC0: Archival started
Log Transport Services Informational 0 2 0 NO 25-AUG-09 ARC1: Archival started
Log Transport Services Informational 0 3 0 NO 25-AUG-09 ARC2: Archival started
Log Transport Services Informational 0 4 0 NO 25-AUG-09 ARC3: Archival started
Log Transport Services Informational 0 5 0 NO 25-AUG-09 ARC4: Archival started
Log Transport Services Informational 0 6 0 NO 25-AUG-09 ARC5: Archival started
Log Transport Services Informational 0 7 0 NO 25-AUG-09 ARC6: Archival started
Log Transport Services Informational 0 8 0 NO 25-AUG-09 ARC7: Archival started
Log Transport Services Informational 0 9 0 NO 25-AUG-09 ARC8: Archival started
Log Transport Services Informational 0 10 0 NO 25-AUG-09 ARC9: Archival started
Log Transport Services Informational 0 11 0 NO 25-AUG-09 ARCa: Archival started
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Informational 0 12 0 NO 25-AUG-09 ARCb: Archival started
Log Transport Services Informational 0 13 0 NO 25-AUG-09 ARCc: Archival started
Log Transport Services Informational 0 14 0 NO 25-AUG-09 ARCd: Archival started
Log Transport Services Informational 0 15 0 NO 25-AUG-09 ARCe: Archival started
Log Transport Services Informational 0 16 0 NO 25-AUG-09 ARCf: Archival started
Log Transport Services Informational 0 17 0 NO 25-AUG-09 ARCg: Archival started
Log Transport Services Informational 0 18 0 NO 25-AUG-09 ARCh: Archival started
Log Transport Services Informational 0 19 0 NO 25-AUG-09 ARCi: Archival started
Log Transport Services Informational 0 20 0 NO 25-AUG-09 ARCj: Archival started
Log Transport Services Informational 0 21 0 NO 25-AUG-09 ARCk: Archival started
Log Transport Services Informational 0 22 0 NO 25-AUG-09 ARCl: Archival started
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Informational 0 23 0 NO 25-AUG-09 ARCm: Archival started
Log Transport Services Informational 0 24 0 NO 25-AUG-09 ARCn: Archival started
Log Transport Services Informational 0 25 0 NO 25-AUG-09 ARCo: Archival started
Log Transport Services Informational 0 26 0 NO 25-AUG-09 ARCp: Archival started
Log Transport Services Informational 0 27 0 NO 25-AUG-09 ARCq: Archival started
Log Transport Services Informational 0 28 0 NO 25-AUG-09 ARCr: Archival started
Log Transport Services Informational 0 29 0 NO 25-AUG-09 ARCs: Archival started
Log Transport Services Informational 0 30 0 NO 25-AUG-09 ARCt: Archival started
Log Transport Services Informational 0 31 0 NO 25-AUG-09 ARCi: Becoming the 'no FAL' ARCH
Log Transport Services Informational 0 32 0 NO 25-AUG-09 ARCi: Becoming the 'no SRL' ARCH
Log Transport Services Informational 0 33 0 NO 25-AUG-09 ARCl: Becoming the heartbeat ARCH
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 0 34 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Fetch Archive Log Error 2 35 16191 YES 25-AUG-09 FAL[server, ARC0]: Error 16191 creating remote archivelog file 'stand'
Log Transport Services Error 0 36 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 37 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 38 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 39 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 40 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 41 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 42 12518 YES 25-AUG-09 Error 12518 received logging on to the standby
Log Transport Services Error 2 43 12518 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 12518.
Log Transport Services Error 0 44 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 2 45 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 46 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 47 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 48 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 49 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 50 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 51 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 52 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 53 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 54 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 55 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 0 56 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 57 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 58 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 59 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 60 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 61 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 62 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 63 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 64 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 65 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 66 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 2 67 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.and when i issue these statements in my stand by the output is.
SQL> select * from V$managed_standby;
PROCESS PID STATUS CLIENT_P CLIENT_PID CLIENT_DBID GROUP# RESETLOG_ID THREAD# SEQUENCE# BLOCK# BLOCKS DELAY_MINS KNOWN_AGENTS ACTIVE_AGENTS
ARCH 4504 CONNECTED ARCH 4504 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3440 CONNECTED ARCH 3440 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5504 CONNECTED ARCH 5504 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5352 CONNECTED ARCH 5352 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5344 CONNECTED ARCH 5344 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 1320 CONNECTED ARCH 1320 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5088 CONNECTED ARCH 5088 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3416 CONNECTED ARCH 3416 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5916 CONNECTED ARCH 5916 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5776 CONNECTED ARCH 5776 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4744 CONNECTED ARCH 4744 1560521699 N/A 0 0 0 0 0 0 0 0
PROCESS PID STATUS CLIENT_P CLIENT_PID CLIENT_DBID GROUP# RESETLOG_ID THREAD# SEQUENCE# BLOCK# BLOCKS DELAY_MINS KNOWN_AGENTS ACTIVE_AGENTS
ARCH 1144 CONNECTED ARCH 1144 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5900 CONNECTED ARCH 5900 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4848 CONNECTED ARCH 4848 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5560 CONNECTED ARCH 5560 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4672 CONNECTED ARCH 4672 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 400 CONNECTED ARCH 400 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4996 CONNECTED ARCH 4996 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5356 CONNECTED ARCH 5356 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5800 CONNECTED ARCH 5800 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3104 CONNECTED ARCH 3104 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 6100 CONNECTED ARCH 6100 1560521699 N/A 0 0 0 0 0 0 0 0
PROCESS PID STATUS CLIENT_P CLIENT_PID CLIENT_DBID GROUP# RESETLOG_ID THREAD# SEQUENCE# BLOCK# BLOCKS DELAY_MINS KNOWN_AGENTS ACTIVE_AGENTS
ARCH 2400 CONNECTED ARCH 2400 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3712 CONNECTED ARCH 3712 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4248 CONNECTED ARCH 4248 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5580 CONNECTED ARCH 5580 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3160 CONNECTED ARCH 3160 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4436 CONNECTED ARCH 4436 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5116 CONNECTED ARCH 5116 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 1488 CONNECTED ARCH 1488 1560521699 N/A 0 0 0 0 0 0 0 0
MRP0 4464 WAIT_FOR_LOG N/A N/A N/A N/A 687453795 1 189 0 0 0 0 0
31 rows selected.Regards
Poorna -
Version diff in standby and primary
Hi, we have production and standby setup in oracle10g. As I would like to upgrade the database from oracle10g to oracle11g. I would like to know if there is version difference in between primary (11g) and standby database (10g) will the datagaurd will sync the standby database ?
Dear Beginner,
There is nothing like version sync in Oracle Data Guard. They should be the same because at the end of the day if it is the physical standby of the production database, this means one day it could be the production database indeed. Treat the physical standby database as a prodcution database and they really should be twins on every aspects.
Regards.
Ogan -
Physical Standby and Primary Hangs after Role Reversal
Created Physical Standby using two machines.(10.2.0.2)
Plugged it into Grid Control(R3)
Tried to switch over. This was carried out successfully but then hanged while updateing the configuration. This is what I am getting in the drcMITDG.log on
Primary:
DG 2007-10-05-09:02:33 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:02:34 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:02:34 0 2 635079900 DMON: ENUM_DRC: success. (len = 987)
DG 2007-10-05-09:02:34 0 2 635079900 DMON: ENUM_DRC operation completed
DG 2007-10-05-09:02:47 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:02:47 0 2 635079901 DMON: ENUM_DRC: success. (len = 987)
DG 2007-10-05-09:02:47 0 2 635079901 DMON: ENUM_DRC operation completed
DG 2007-10-05-09:02:48 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:03:03 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:03:18 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:03:28 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:03:28 0 2 635079902 DMON: ENUM_DRC: success. (len = 987)
DG 2007-10-05-09:03:28 0 2 635079902 DMON: ENUM_DRC operation completed
DG 2007-10-05-09:03:33 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:03:48 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
DG 2007-10-05-09:04:03 0 2 0 DMON: Entered rfm_get_chief_lock() for CTL_SWITCH, reason 0
SECONDARY:
DG 2007-10-04-14:04:51 0 2 0 DMON: Health check master lock conversion successful
DG 2007-10-04-14:04:51 0 2 0 DMON: a process acquired the healthcheck master lock
DG 2007-10-04-14:04:51 0 2 0 DMON: posting primary instances for SWITCHOVER phase 5
DG 2007-10-04-14:04:51 0 2 0 DMON: SWITCHOVER Completed with errors
DG 2007-10-04-14:04:51 0 2 0 INSV: Received message for inter-instance publication
DG 2007-10-04-14:04:51 0 2 0 Primary Site is named: MITDG_BACKREST
DG 2007-10-04-14:04:51 0 2 0 req_id 0.0.0, opcode CTL_SWITCH, phase END, flags 5
DG 2007-10-04-14:04:51 0 2 0 error = ORA-16509
DG 2007-10-04-14:04:51 0 2 0 DMON: dispersing message to standbys for SWITCHOVER phase 5
DG 2007-10-04-14:04:51 0 2 0 INSV: All instances have replied for message
DG 2007-10-04-14:04:51 0 2 0 DMON: site 02001000, instance 00000001 queuing healthcheck lock re
quest
DG 2007-10-04-14:04:51 0 2 0 req_id 0.0.0, opcode CTL_SWITCH, phase END
DG 2007-10-04-14:04:51 0 2 0 DMON: Releasing healthcheck master lock
DG 2007-10-04-14:04:51 0 2 0 DMON: Health check master lock conversion successful
DG 2007-10-04-14:04:51 0 2 0 DMON: a process acquired the healthcheck master lock
DG 2007-10-05-08:48:42 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
DG 2007-10-05-08:48:52 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
DG 2007-10-05-08:49:07 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
DG 2007-10-05-08:49:22 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
DG 2007-10-05-08:49:37 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
DG 2007-10-05-08:49:52 1000 2 635079894 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason
0
Any idea what is going on..
ThanksHi, you must upraise a iTAR to Oracle Support for resolve this problem, because this behaviour is irregular and you will lost much time for analyze and resolve this problem.
Regards. -
On my Primary database
when I did archive log list, it gives me
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /u04/oradata/arch/PROD/
Oldest online log sequence 29627
Next log sequence to archive 29629
Current log sequence 29629
On my standby database, when I did archive log list, it gives me
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /u04/oradata/arch/STNBY/
Oldest online log sequence 29627
Next log sequence to archive 0
Current log sequence 29629
But during hotback on primary it pops up with these errors
RMAN-08137: WARNING: archive log not deleted as it is still needed
archive log filename=/u04/oradata/arch/PROD/PROD_0001_749397572_0000028449.arc thread=1 sequence=28449
RMAN-08137: WARNING: archive log not deleted as it is still needed
archive log filename=/u04/oradata/arch/PROD/PROD_0001_749397572_0000028450.arc thread=1 sequence=28450
RMAN-08137: WARNING: archive log not deleted as it is still needed
I am sure Standby is not in sync with primary.
Can someone explain in detail how to resolve this issue.
Any help is greatly appreciated.
Thank youMy alert log in bdump has the following information:
Primary database is in MAXIMUM PERFORMANCE mode
RFS[739]: Successfully opened standby log 4: '/u01/oradata/STNBY/redo_STNBY_04a.log'
Tue Sep 13 11:27:35 2011
Primary database is in MAXIMUM PERFORMANCE mode
RFS[739]: Successfully opened standby log 4: '/u01/oradata/STNBY/redo_STNBY_04a.log'
Tue Sep 13 11:28:04 2011
Primary database is in MAXIMUM PERFORMANCE mode
RFS[739]: Successfully opened standby log 4: '/u01/oradata/STNBY/redo_STNBY_04a.log'
Tue Sep 13 11:40:33 2011
Primary database is in MAXIMUM PERFORMANCE mode
RFS[739]: Successfully opened standby log 4: '/u01/oradata/STNBY/redo_STNBY_04a.log'
Tue Sep 13 12:00:44 2011
Primary database is in MAXIMUM PERFORMANCE mode
RFS[739]: Successfully opened standby log 4: '/u01/oradata/STNBY/redo_STNBY_04a.log'
Tue Sep 13 12:02:49 2011
Primary database is in MAXIMUM PERFORMANCE mode
RFS[739]: Successfully opened standby log 4: '/u01/oradata/STNBY/redo_STNBY_04a.log'
Trace file in bdump give me the following information.
*** 2011-09-09 11:58:59.650 61283 kcrr.c
FAL[client, MRP0]: Error 12514 connecting to PROD for fetching gap sequence
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
*** 2011-09-09 11:59:29.662
OCIServerAttach failed -1
.. Detailed OCI error val is 12514 and errmsg is 'ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
*** 2011-09-09 11:59:29.662 61283 kcrr.c
FAL[client, MRP0]: Error 12514 connecting to PROD for fetching gap sequence
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
*** 2011-09-09 11:59:59.674
OCIServerAttach failed -1
.. Detailed OCI error val is 12514 and errmsg is 'ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
*** 2011-09-09 11:59:59.674 61283 kcrr.c
FAL[client, MRP0]: Error 12514 connecting to PROD for fetching gap sequence
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
*** 2011-09-09 12:00:29.687
OCIServerAttach failed -1
.. Detailed OCI error val is 12514 and errmsg is 'ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
*** 2011-09-09 12:00:29.687 61283 kcrr.c
FAL[client, MRP0]: Error 12514 connecting to PROD for fetching gap sequence
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
*** 2011-09-09 12:00:59.697
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
----------------------------------------------------------- -
I have downloaded a game from i tunes but I can't see it in both phone and PC
I have downloaded a game from itunes but I can't find it in both my phone and my i tuner account. What is the problem?
When did you buy/download it ? If it's still in your country's store, and it's not an iPad-only game, then it should show in the Purchased tab in the App Store app on your iPhone, and the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes. If it's not showing there, and it's still in the store, then check to see if it's hidden : http://support.apple.com/kb/HT4919
-
ZENworks Database and Primary Servers / Scheduled Reboot
Hi all,
I hope I got the correct forum for my questions. If not could an admin be so good to move me to the correct one?
We've got a ZENworks 11.3.1 Zone with 4 Primary Severs (SLES 11SP3) and up to 25 Satellites (mixed OS). The Databases are on MS SQL.
Some times we get very strange behaviour of bundles, policies and ZCC is slow. After taking the Databases down and reboot the four primaries the zone is working fine again for a time.
My question is: Do you reboot your Zone daily/weekly? I did'nt find any recommendations in the documentation.
Thanks in advance for letting me know how you handle this.
Kind regards
Sebastiantbargfrede <[email protected]> wrote:
> nop1983;2330117 Wrote:
>> tbargfrede <[email protected]> wrote:
>>> Hi all,
>>>
>>> I hope I got the correct forum for my questions. If not could an
>> admin
>>> be so good to move me to the correct one?
>>>
>>> We've got a ZENworks 11.3.1 Zone with 4 Primary Severs (SLES 11SP3)
>> and
>>> up to 25 Satellites (mixed OS). The Databases are on MS SQL.
>>>
>>> Some times we get very strange behaviour of bundles, policies and ZCC
>> is
>>> slow. After taking the Databases down and reboot the four primaries
>> the
>>> zone is working fine again for a time.
>>>
>>> My question is: Do you reboot your Zone daily/weekly? I did'nt find
>> any
>>> recommendations in the documentation.
>>>
>>> Thanks in advance for letting me know how you handle this.
>>>
>>> Kind regards
>>> Sebastian
>>>
>>
>> Right place
>>
>> No, you should not need to reboot every Day, week or even month. Using
>> a
>> lot of RAM?
>>
>> What about your DB's maintenace plan? How does this look?
>>
>> --
>> Nops
>
> All primaries got up to 6GB RAM which is used normally 50-70%.
> The Database MS SQL Server uses RAM 70-80%
>
> Database maintenance plan: backup every day, shrink every day.
>
> Devices in zone: >2000
> Database size: 23GB
>
Hey
Zpm in place? Thats a large DB, I see 9GB with 2700 devices on sql.
This from the docs:
Check database integrity
Shrink database
Reorganize index
Rebuild index
Update statistics
Back up database
Do you do any of the above? You could give it a try?
Nops -
Should standby and primary database use the same release version?
Then If I do upgrade, I'll have to stop the two database
and then upgrade?Hi,
Look at the requirements it is specified there. And as far as I can recollect they must match. Because standby feature differ beween the versions.
Best,
EA -
How do I resize a page so that I can see all of both right and left of page???
I cannot read the left side of pages. This includes ALL pages!!!!
Try to remove the Firefox plist file (org.mozilla.firefox.plist).
* http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).
You can also try to remove the file localstore.rdf
*http://kb.mozillazine.org/Corrupt_localstore.rdf -
SECURITY PATCH ON STANDBY DATABASE AND PRIMARY DATABASE
I have a question on applying CPU on standby and primary database
I have a standby database on machine2 and primary on machine1
I applied a CPU patch on the Oracle Home of Standby database and
did not run the catcpu.sql as standbydatabase is in mount state.
Now i am going to apply the CPU patch on primary database.
What i need to confirm is that after i apply the patch on primary database oracle home
and run the cat cpu.sql on that do i have to do anything on the standby database
for instance rebuilding it or something or the change would be shipped to the standby
server automatically.
The purpose is to have the primary and standby database on the same patch level
in case of a failover
Please let me know asapAny one has any idea on this. Any ideas would be appreciated
-
Error in OAM Identity and Access Servers login pages
Hi All,
I am trying to install OAM I completed all installations . But now am getting error as invalid "*Invalid credential*". IS there any process to know what the userid and password for the both Identity and Access Servers . Please tell me if there is any process. It very helpful to me .
Thank u & Regards
PokuriHi Pokuri,
Could be that the searchbase is wrong, so that OAM is not finding the user whose credentials you are entering. Or, maybe OAM is using a different attribute as the login attribute (for example, you could be entering the cn when OAM is expecting the uid).
Try binding to ldap with another utility (such as ldapbind or ldapsearch) to see if this gives any indications. You may need to reconfigure the Identity Server to verify/correct the searchbase (for this, follow note 730376.1) and to check which attribute has the "Login" semantic type in OAM.
Regards,
Colin
Maybe you are looking for
-
The problem is i only am able to be on one or the other, at first i was able to be on internet and connected to wifi network thus being able to surf and print how do i need to fix this?
-
Run Form in Form Builder 9.0.4.0.0
Hi All: I have installed developer suite with form builder 9.0.4.0.0. Installation was successful but when i run a form from form builder it opens a browser window having address of html file resides in my c:\documentsandsetting \username\localsettin
-
Problem with Integration Process
Hi all, I have a problem within a Integration Process. I created a loop with help of a local integer element. On the development system it was running without any issued. But on the productive machine the Integration process runs until he has to incr
-
Elements to CS5 upgrade procedure
I've been searching around the adobe website, but I cannot find an answer yet. I'm thinking of upgrading from photoshop elements to photoshop cs5. My question is, what is the upgrade proceedure like? I don't think I have elements installed anymore,
-
Can't play videos from iTunes store after switching machines
Symptom: my iTunes Library lives on an external drive. Recently I needed to send my primary MacBook Pro in for repair, so I authorized my backup machine successfully and used it in the interim. Upon the return of my primary machine, I did a fresh OS