Segment E1PITYP occurs for each subtype of infotypes in update mode

Hi experts,
In update mode the resulting IDoc contains segment E1PITYP for each subtype (for example 7) of Infotype 6 (for example) even if it contains no segments of type E1P1001.
I can see all infotypes and subtypes of the distribution model in the idocs. Even if the employee does not have an infotype or one specific subtype. In this case, node E1PITYP appears without child node.
Thanks a lot for your help
Cheers,
AS

Hi,
thanks for your answer.
Still I am little bit confused and want give an more detailed description of my problem.
If I export an organizational unit in initial mode I have for example 5 segments of type E1PITYP and each of them has a subsegment (for example E1P1001).
Export of the same organizational unit in update mode results in more than 200 segments of type E1PITYP and all of them without subsegment.
This seems to happen for all infotypes (not only 1001 like I thought before).
Now I want to understand why this happens and if it's possible to update an organizational unit without segments of type E1PITYP that don't have a subsegment.
Regards
Patrick

Similar Messages

Segment E1PITYP occurs for each subtype of Infotype 1001 in update mode

Hi,
I am using transaction PFAL and IDoc HRMD_A for transferring HR data.
In update mode the resulting IDoc contains segment E1PITYP for each subtyp (for example A002) of Infotype 1001 even if it contains no segments of type E1P1001.
Could somebody explain this and is it possible to avoid this behavior?
Thanks and regards
Patrick

Hi,
thanks for your answer.
Still I am little bit confused and want give an more detailed description of my problem.
If I export an organizational unit in initial mode I have for example 5 segments of type E1PITYP and each of them has a subsegment (for example E1P1001).
Export of the same organizational unit in update mode results in more than 200 segments of type E1PITYP and all of them without subsegment.
This seems to happen for all infotypes (not only 1001 like I thought before).
Now I want to understand why this happens and if it's possible to update an organizational unit without segments of type E1PITYP that don't have a subsegment.
Regards
Patrick

How do I create a table of 3 data elements for each trial and have it updated instead of waiting until the end of the program?

I am trying to record 3 pieces of data, all (software) timing in ms (in U8 integers). I managed to finally get each data in the right column but now it doesn't record anything in the table and it doesn't update the numeric indicators during the experiment like it should. I can't figure for the life of me what I did wrong. I know at least the trial part of the program works, but so far the data recording part is giving me a headache.
Thanks
Attachments:
BETACRT.vi ‏241 KB

Why it is not reporting the data is easy; fixing the program may not be. LabVIEW uses a dataflow paradigm. This means that no part of the program executes until all of its data inputs are availble. In your case the table and the array functions driving it are fed by outputs from the outer while loop. Thus no data gets to the table until the while loop has finished executing (which is at the end of your experiment). One possible approach would be to store the data in a shift register and move the table inside the loop.
Many experienced LV programmers try to avoid or minimize the use of sequence structures and local variables to read and write to/from front panel objects. We use a state machine which is a while loop with a case structure. Queues can be u
sed to pass data between the user interface and the data acquistion loops. This subject is too involved to be handled in a brief posting, but if you search the archives and examples you can learn more.
Also, be aware that software timing can be problematic if you are using a desktop operating system. If the OS decides to check the net for software updates or something you could have large discrepancies in your timing. These might be rare, but there is no reliable way of detecting them. I have built several systems similar to what you seem to be trying to do and have never been successful with software timing.

BPM For-Each Block

Hello all,
My scenario works like JDBC - XI - JDBC. I will get se of rows from Database I have to send each row to update target field using For-each block in BPM. Here I will be using Synchronous send to JDBC so that if the data gets updated I'll get update_count as response. My doubt is consider i'm having 5 rows i'm passing each row into the for-each block two messages successfully updated third row is throwing some SQL exception at this time is it possible for me to catch this error? Also bcoz of this exception the rest of the rows should not be affected. Please help me regarding this regard.
Best Regards,
Raj.

Hi,
You can try this.
After the send step in the BPM, use a container step to assign the response from the JDBC to a multiline container.
Then you will have all the responses for the individual rows. Whenever the no. of records updated is 0, you can take appropriate action.
Regards,
Puloma.

How to generate a new segment in IDoc for multiple occurance of Control Num

Hi Experts,
In my scenario, i need to generate a new segment in IDoc(Target Structure) based on Control Number Field in the Source Structure.
The segment need to be created for multiple occurance of the Control Number.
Ex:
Control Number - 100 appears 5 times in Source Structure.This control Number is mapped to one of the Field in the Segment of IDoc.
Now my requirement is to generate the Segment 5 times with respective to this Control Number.
please help me out to resolve this issue.
Thanks,
Kish.

Hi,
Here is the XML Structure of my Source:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:GoodsReceipt_MT xmlns:ns0="urn:WOL-com:XI:data:HJ:10">
   <row>
      <CONTROL_NUMBER>111</CONTROL_NUMBER>
      <LINE_NUMBER>1111</LINE_NUMBER>
      <CONTROL_NUMBER_2/>
      <OUTSIDE_ID/>
      <WH_ID>111111</WH_ID>
      <LOCATION_ID/>
      <HU_ID>11111</HU_ID>
      <NUM_ITEMS/>
      <ITEM_NUMBER>111111</ITEM_NUMBER>
      <CONTROL_NUMBER_3>LR</CONTROL_NUMBER_3>
      <LOT_NUMBER>11111</LOT_NUMBER>
      <UOM>11111</UOM>
   </row>
   <row>
      <CONTROL_NUMBER>111</CONTROL_NUMBER>
      <LINE_NUMBER>12222</LINE_NUMBER>
      <CONTROL_NUMBER_2/>
      <OUTSIDE_ID/>
      <WH_ID>12222</WH_ID>
      <LOCATION_ID/>
      <HU_ID>1222</HU_ID>
      <NUM_ITEMS/>
      <ITEM_NUMBER>112222</ITEM_NUMBER>
      <TRAN_QTY>112222</TRAN_QTY>
      <CONTROL_NUMBER_3>LR</CONTROL_NUMBER_3>
      <LOT_NUMBER>12222</LOT_NUMBER>
      <UOM>1122222</UOM>
   </row>
   <row>
      <CONTROL_NUMBER>222</CONTROL_NUMBER>
      <LINE_NUMBER>2222</LINE_NUMBER>
      <CONTROL_NUMBER_2/>
      <OUTSIDE_ID/>
      <WH_ID>22222</WH_ID>
      <LOCATION_ID/>
      <HU_ID>222222</HU_ID>
      <NUM_ITEMS/>
      <ITEM_NUMBER>2222222</ITEM_NUMBER>
      <TRAN_QTY>22222222</TRAN_QTY>
      <LOCATION_ID_2>33333333</LOCATION_ID_2>
      <CONTROL_NUMBER_3>LR</CONTROL_NUMBER_3>
      <LOT_NUMBER>22222</LOT_NUMBER>
      <UOM>22222</UOM>
   </row>
   <row>
      <CONTROL_NUMBER>333</CONTROL_NUMBER>
      <LINE_NUMBER>3333</LINE_NUMBER>
      <CONTROL_NUMBER_2/>
      <OUTSIDE_ID/>
      <WH_ID>33333</WH_ID>
      <LOCATION_ID/>
      <HU_ID>33333</HU_ID>
      <NUM_ITEMS/>
      <ITEM_NUMBER>333333</ITEM_NUMBER>
      <TRAN_QTY>33333333</TRAN_QTY>
      <CONTROL_NUMBER_3>LR</CONTROL_NUMBER_3>
      <LOT_NUMBER>33333</LOT_NUMBER>
      <UOM>333333</UOM>
   </row>
</ns0:GoodsReceipt_MT>
Now Control_Number 111 occurs 2 times, 222 & 333 occurs 1 time.
Now one IDoc for 111,222 & 333 should be generated.
But Control_number 111 appears 2 times.
Now the data in the 2 rows should be passed to Single IDoc by repeating the segments inside the IDoc.
As u said i changed the Occurance of IDoc to 0...unbound and imported as External Definition. I have done upto Generating IDoc for each unique Control_Number.
I stuck up at repeating the Segments in the IDoc.
So please help me out.
Thanks,
Kish.

Vendor Open Items for each Segment ?

Hi all,
What is the most effective way to grouped the all Vendor Open Items for each Segment ?
I think i should use tables BSIK and (BSEG or FAGLFLEXA).
Field BSEG-SEGMENT does not always have a value (often is empty), so it is likely to be used FAGLFLEXA-SEGMENT.
Thanks in advance
Serena

.

IDOC to file: Increase sequence number for each item in a segment

Dear All,
I am having one scenario IDOC to file, where one IDoc with multiple items for an header in it will be sent.
In Destination structure, for each iitem segment I am creating multiple rows. I have a field(INC_NUM) in target structure where in I have to start line number from 1 for each item.
Also I have a condition - for item x or y I should only have the same line number.
TinAdvance
Swarna.
Edited by: Swarna on Oct 24, 2011 8:15 AM

Hello,
You can use the statistic function called index for your requirement. Can you give sample input/output so that we can visualize further?
Hope this helps,
Mark

Query to get possible values for each segment

Hi Gurus,
Give the flex value set id, what is the query to get all possible values for each segment (just like what is shown in the accounting flex window)?
Thank you,
Beibei

Hi Beibei,
The table FND_FLEX_VALUES_VL can give you details of values available in the Value set i.e. 1 segment at a time.
If you are looking for a concatenated view of Accounting Flexfield values, that would be available in GL_CODE_COMBINATIONS table.
Regards,
Ivruksha

Documents Sequence numbering for each Branch (Branch as segment)

dear Brother's
can help me in this case
Documents Sequence numbering for each Branch (Branch as segment)
Each branch have an own sequence
I implement oracle Business suite ERP for Five Branch ( KSA,INDIA,DUBIA ,JORDAN ,SYRIA )
I want to segregate sequence numbering for each branch, sequence for (
Sales order, invoice, purchase order, Invoice)
Is there a possibility to link sequence with any segment I define it in COA like Branch
Note: I work in single Operating Unit

Hi,
You might be able to adapt this solution to work for your case: https://acrobat.com/#d=*2slxPLc6c-H0U449vA4jQ. It's more about page numbers for different Master Pages, but you may be able to tie it to the different data nodes.
Niall

How to generate multiple files for each segment in the IDOC

Hi,
I have a IDOC with multiple segments, for each segment, a file needs to be generated,
There is only one target structure. Please let me know as to how do we handle this requirement in XI.
Regards,
Younus

Use multimapping in message mapping. Then map the Idoc node to the Message Type of File.
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
Regards,
Prateek

Does LSMW works for different subtypes (Each subtype has different screens)

Hi All ,
I have to update a Custom Infotype, there are 3 subtypes for the Infotype and the screen changes for every subtype. Does LSMW work for this ? If not what would be the appropriate method ?
Thanks & Regards,
Ravi

Yes, I have checked for BAPI's, but there is no BAPI which can be used as this infotype is a Custom Infotype.

Custom Infotype : Calling different screens for different subtypes

Hi ,
My custom infotype has 2 different subtypes. I want to assign these 2 subtypes with 2 different screens so that whenever a particular subtypes in used in PA20/PA30, the user gets the screen relevant to that subtype.
I know some configuration is there but can't recall exactly what needs to be done.
Any hints are greatly appreciated.
Thanks a lot,
Sandip.

Hi Suresh,
thanks for the information. i tried doing that. i could hide the fields. but the problem is for both the subtypes the screen number(which i have to enter while using v_t588m) is the same. the field which i hide for subtype 1 should be available for subtype 2.
for example consider fields a,b,c,d,e and f.
For subtype 1 i should display a, b,c,d,f
for subtype 2 i should display a,b,c,e.
in the custom infotype i created i have all the fields a,b,c,d,e and f.(currently all these fields appear for both the subtypes)
in v_t588m i could hide the fields generally but could not do it separately for the subtypes. hope you understood. thanks a lot Suresh.

Unable to mark ITXEX field for first subtype in IT40

Hi,
My problem is as follows:
1. I am using a bespoke ABAP program to create a subtype (any subtype) for IT40 (objects on loan).
2. The program is able to create the infotype - subtype records correctly. This is was verified using PA30.
3. However, if the subtype created is the first record i.e. SEQNR = '000', the ITXEX field would NOT be marked, i.e. ITXEX=X.
4. Subsequent created records of the same subtype e.g. SEQNR = '001, 002...etc' will be marked however.
What happens then is that the comments are not displayed for the first subtype record in PA30. They are however displayed for all subsequent records.
I am able to see all the created records in table PA0040. Also, the cluster table PCL1 is updated with a new record each for each records created in PA0040.
I am using HR_INFOTYPE_OPERATION (Mode = 'INS') to create the record and CL_HRPA_TEXT_CLUSTER Update method to write the comments into the cluster table.
I am unsure if this could be a config issue. Please help if you know what is going on.

Hi,
I don't think supressing through Global Personalization will change the business logic. Within the Business Logic it checks for the mandatory field.
After the changes I guess you need to make the changes accordingly.
The below link might be of some help.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable
Please correct if I am wrong.
Cheers-
Pramod

How to create one primary key for each vendor

Hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table vendor through XI.
structures are as follows:
sender side: ZVendorIdoc (this is a customized IDOC , if i triger IDOC for multiple vendors then it triggers only 1 idoc with multiple segment )
Receiver side:
DT_testVendor
    Table
        tblVendor
            action UPDATE_INSERT
            access                     1:unbounded
                cVendorName         1
                cVendorCode        1
                fromdate                1
                todate                    1
             Key1
                cVendorName         1
if i trigger idoc for multiple vendors ,for example vendor 2005,2006 and 2010 . then i can see that the only key comes from the very first field (2005) and the whole record for vendor 2005,2006 and 2010 goes into the table with this(2005) as a primary key
now again if i send data for these three vendor 2005, 2006 , 2010, in which record for the vendor 2005 is same and for 2006 and 2010 are different than it takes 2005 as a primary key and it does not update the data in the table.
my requirement is like this:   for each vendor there should be one unique key assigned.
                                          for above said example there should come three keys one for each vendor .
could you please help me how to do this???????????

Hi,
In Mapping Make the statement is 0-unbounded.For each vendor create a statement.This will solve your problem.
Regards,
Prakasu.M

How to get all GL accounts for each account in a given bank...

Hello Experts,
Is there a way to get all GL accounts for each account in a given house bank?
IN our company, there are 5 GL accounts for each bank so 1 GL for 1 account. they are for recon, payables,
receivables, etc. I checked table T012K but it only shows the main GL account. Hope you
can help me guys. Thank you and take care!

Try this.. it is based on company code
here it_cocodes is an internal table containing company codes
DATA: BEGIN OF it_glaccount OCCURS 0,
    bukrs TYPE bukrs,
    saknr TYPE saknr,
    txt50 TYPE txt50_skat,
   END OF it_glaccount.
DATA it_glaccount_wa LIKE it_glaccount.
LOOP AT it_cocodes INTO it_cocodes_wa WHERE ktopl <> ''.
    SELECT bukrs saknr FROM skb1
      INTO CORRESPONDING FIELDS OF it_glaccount_wa
      WHERE bukrs = it_cocodes_wa-bukrs.
      IF sy-subrc = 0.
        SELECT SINGLE txt50 FROM skat INTO it_glaccount_wa-txt50
          WHERE spras = 'E' AND ktopl = it_cocodes_wa-ktopl
          AND saknr = it_glaccount_wa-saknr.
        APPEND it_glaccount_wa TO it_glaccount.
        CLEAR it_glaccount_wa-txt50.
      ENDIF.
    ENDSELECT.
loop at it_glaccount into it_glaccount_wa.
write:/....
endloop.
refresh...
clear...
endloop.

Segment E1PITYP occurs for each subtype of infotypes in update mode

Similar Messages

Maybe you are looking for