Segment level I/O statistics in Oracle 8i
I need to get segment level i/o statistics in Oracle 8i. I am looking at v$session_wait to find out the block id each i/o event is happening to. But for 'db file parallel write' event, there is only number of files and number of blocks info. How do I determine which file and which block id the event is happening to? Thanks a lot!
Thomas,
You need to use table alias for this:
select E.att_ext.NAME from emp_ext E;
Notice the 'E' here.
Regards,
Geoff
null
Similar Messages
-
How to genrate and check wait statistics in oracle 10g
Dear all,
how to genrate and check WAIT STATISTICS in oracle 10g on RHEL4.
Regards,
AliOracle Kernel keeps track of these statistics. Query v$waitstat for overall system level wait statistics or v$session_wait for individual session wait statistics.
-
Simulair report for FBL5N and FBL1N for new general ledger on segment level
We are working with segments in new G/L ledger. We want to run a open item report where we can combine customers and vendors by segment. The vendors and customers are linked in the master data. In the "old" reports FBL5N and FBL1N you can do this but not by segment.I found the following report on segment level:
- S_PCO_36000218 - Receivables: Segment
- S_PCO_36000219 - Payables: Segment
What I'm missing is to run 1 report for Customers and vendors. What I'm missing to is that there are only some fields available on line item level. (I like to have invoice number, documentype,.......)
Is there a standard report for this in new genaral leger?
Is it possible to ad additional field to th list viewer.What is this user license type? All financial transactions need professional license.
Thanks,
Gordon -
Views Status at MARA general info segment level
Hi all,
Please guide me how to maintain Views Status at MARA general info segment level.I am extending standard MATMAS IDOC for my own fields.
Thank you.You actually need to run it with "check -access"; memuse and leaks won't help with the crash, which happens because of illegal memory access. Hopefully, "check -access" will help you to locate the bad guy, but that's not panacea either.
To be precise:
- start dbx
$ dbx <your app>
- issue
(dbx) check -access
(dbx) run
and wait for dbx to stop and report suspicious memory access. -
IDOC filter at Field / Segment Level
Hi
Can you please tell me how to set an IDOC filter at field and segment level in short?
ThanksHi,
There are two filtering in IDoc.
Segment Filtering:
Segment filtering can be achieved using T/Code BD56. Here you can suppress a whole segment irrespective of data inside it . You have to give Message Type / Sender Prrtner / Receiver Partner.
Data Filtering:
Data filtering can be done in dustribution model (BD64) where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Please check this link for detail information.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
How to see the statistics in Oracle Cloud.
While executing the select command, how can i see the execution plan and statistics in oracle cloud SQL Command Window
select * from test_random where empno=1000;
I need to find the consistent read and physical reads of the particular query.
When I tried to execute the following command
SET AUTOTRACE ON EXPLAIN STATISTICS
I am getting error.I think you have to create it in SE11 first. Although you can probably use native SQL to access it from an ABAP program.
Rob -
Hi,
How can we simulate the GL segment level security in OBIEE GL and Profitability Module of OBI Apps Pre build application ..? Any docs available, Please let me knowYou define profitability segment structure with KEQ3.
Define Profitability Segment Characteristics (Segment-Lvl Characteristics)
In this step, you specify whether a characteristic in CO-PA is used to create profitability segments.
Characteristics that are used to create profitability segments are available for the information system and in planning, for example.
Characteristics that are not involved in the creation of profitability segments remain in their line item in CO-PA.
Frequently occurring characteristics that rarely bear the same value (such as the sales order number for a repetitive manufacturer) can thus be excluded from the creation of your profitability segment. In this way, you can improve the performance of your profitability analysis considerably.
Furthermore, you can perform profitability analysis at the customer group level or at the product group level by ceasing to use customers or products in that analysis.
Regards,
Rebe. Z -
Change description of value fields and segment level chars in prod system
Hi
1 . We would like to change the description of some value fields.... We would like to know whether the change has to be carried out directly in the production client by opening the client using SCC4 or we should change the description in development client and transport it to production...
We are afraid that if we transport the operating concern again from dev to production system using KE3I, it may affect the transaction data which is already lying in the production system
2. We would also like to create and include some new fields as Segment level characteristics in COPA... What is the proces for the same and whether the same has to be done directly in production or transported from dev client
3. Some value fields which were copied in our operating concern from a template of Air line Industry, are not suitable to oour business. So we are trying to change their description.. But SAP does not allow to change the description of thes value fields..
Only those value fields which were created by us starting from VV***, can be changed.. Description of those delivered from the template, cant be changed. What is the process of doing the same
Regards
Ajay MaheshwariHi
When the Operating concern was copied from Airline Industry, many standard chars which are not applicable to Airline Industry were not copied.... For eg: Material group 1 to 5... These are std fields of Mat master which normally exist in Operating concern when I used to create it manually.... Many other chars reqd by the business are not available
Someone else copied it using Airline template and many reqd chars are not available at all... I have the option of creating User defined chars for it and write a derivation rule to populate it...
Though COPA is active, my client does not use it as of now in ECC 5.0.. They would like to use it post ECC 6.0.. So, I thought its better to start afresh than carrying forward the mistakes done by someone else.. They are OK with this model, but I wanted to be sure what all issues can be faced due to this
Regards
Ajay Maheshwari -
Hi All,
Client got one company code and 4 segment. Branches are treated as segment in SAP for drawing P&L and BS at segment level. Now client is insisting on different no. ranges for each segment. No. ranges always at company code level. Is there any work around solution to provide no. ranges at segment level.
Please advice.
Regards,
HarishHi,
May I know What type of Budgetory control mechnism is used? Non Integrated , Integrated top down or Bottom UP?
Thanks -
How to check the number of contacts with segment level 'food and beverage' in the segment builder?
Do we have any table to check this.How to check the number of contacts with segment level 'food and beverage' in the segment builder?
Do we have any table to check this. -
Activating Segment level Characters subsequently
Hi Experts,
We want to activate two additional Characteristics subsequently (meaning in a live environment)at Segment level in Account based CO-PA. If any of you done this earlier, could you please let me know what are the things I should be aware of? Any special scenarios you tested? Did you encounter any issues, because of this change and if so, how did you fix it. Any cancellation of old documents created any problem?
Thanks for your time.
Regards,
SAP_CO1Hi
Go ahead and activate.. No issues!!
I have done it in my previous assignment... No issues as such, just that the posted data already wont be impacted because of that.. It will have only prospective effect
Regards
Ajay M -
ORA-00604: error occurred at recursive SQL level 1 (Call to a Oracle View)
I have created a view that refers to a package function within the sql select.
Like
E.x
CREATE OR REPLACE VIEW VW_TAX
as select
test_pkg.fn_get_gl_value(acct_id) desired_col1,
test_pkg.fn_get_gl_desc_value(acct_id) desired_col2
From tables a, b
a.col= b.col
The sample function( fn_get_gl_value) is embedded into a package (test_pkg).
Function fn_get_gl_value:
It earlier referred to table A1, B1, C1 and this query took really long, Therefore I used object type tables and stored the values required once within the package when it is invoked. Later I used the Tables A1, B1 and C1(table Cast from the type Table Loaded in Package Memory)
The query was fast and fine, but now when I try to re-use the view
select * from VW_TAX
where acct_id = '02846'
It fails with this message
09:32:35 Error: ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
Note: The database is Oracle8i Enterprise Edition Release 8.1.7.4.0.
Maximum cursors database is 500
Please let me know if there is any known solution,
Appreciate all your help
Thanks
RPSeems like your OPEN_CURSORS init.ora parameter is set too low.
See Metalink Note:1012266.6 for details.
ORA-01000: "maximum open cursors exceeded"
Cause: A host language program attempted to open too many cursors.
The initialization parameter OPEN_CURSORS determines the
maximum number of cursors per user.
Action: Modify the program to use fewer cursors. If this error occurs
often, shut down Oracle, increase the value of OPEN_CURSORS,
and then restart Oracle. -
How to check the row level security in TOAD for oracle
Hi ,
for ex, i have 2 types of users
normal user and super user
super user can see the group set (some column name) created by normal user
but normal user can not see the set created by super user
this set crestion aslso has 3 types "U','P',S'
P & S can be viewed by even normal user
but U should not
so here we are having some row level security for the normal user .....
So, in TOAD for oracle how to check that......
Let me know if i'm not clearLike
I'm the super user....
And some records are inserted to a table by different users ('a' , 'b', etc....)
So,if user 'a' logins then he can be able to see only the records inserted by 'a' only...
how to see in TOAD where such type of scripts (filter conditions) are written..... -
MBRC and SYSTEM STATISTICS in Oracle 10g database.
Hi All,
I am performing database upgrade from Oracle 8i Solaris to Oracle 10g HP-UX using exp/imp method.
But i do have some doubts regarding MBRC and System statistics.
MBRC in Oracle 10g is automatically adjusted if MBRC parameter is not set, but i found value 128 as shown below.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for HPUX: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> sho parameter multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 128Also i performed one simple full table scan to test it...but db file scattered read is performing on 128 blocks. So i dont think 128 is suitable and is automatic, i mean MBRC is not set accrodingly it always uses 128.
Does this MBRC value affects whole database performance?
Regarding SYSTEM STATISTICS i found below result:
SQL> select * from AUX_STATS$
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 11-09-2009 04:59
SYSSTATS_INFO DSTOP 11-09-2009 04:59
SYSSTATS_INFO FLAGS 1
SYSSTATS_MAIN CPUSPEEDNW 128.239557
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHRNow whether NOWORKLOAD or WORKLOAD is better, and this server is still under building process....so how can i collect WORKLOAD stats as high load on this server can't be performed?? Is it really require to gather system statistics, what will happen with NOWORLOAD stats?
I have not seen single database where system stats are gathered in our organisation having more than 2000 databases.
-YasserMaybe this article written by Tom Kite helps:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:499197100346264909 -
Can we create wallet at User Level to implement TDE in Oracle 10g
Hi
I am going to use a Oracle 10g TDE security feature for data security.I have gone through with lots document.Everywhere there is mention to open or close a Wallet at system level.I mean ALTER SYSTEM..that means except DBA no one can see the encrypted column.
But my requirement is bit different,I want to encrypt the column based on user.
lets take example- Suppose we have one table TEST with C1,C2,C3,C4,C5,C6 column and there is U1,U2,U3 user.I want to encrypt C1 and C3 for U1 , C2 and C5 for U2 , C4 and C6 for U3 and U1,U2 and U3 can see only all columns except encrypted column.
My question is Can we apply TDE at User level rather than system level.
Any ideas or thought would be appreciable.
Thanks in advance.
ANwarThe idea of TDE is to provide data protection on storage media, so when your backup tapes drop from the truck or the hard disk of a stolen laptop is sold online, encrypted data remains encrypted and can't be read by anyone.
It seems to me as if you try to achieve access control by encryption, which you don't need: If users have sufficient privileges or the business need to see data, then they should be granted access and see the data de-crypted. Otherwise, access control mechanisms (roles, views, VPD, OLS) should kick in and hide the rows from them.
So, for day-to-day business of your database, the wallet needs to be open, so that the database can de-crypt data for users who have been granted to see credit card numbers etc., but then limit access to credit card numbers they are not allowed to see with other measures. There is a little hands-on for TDE and VPD here:
http://www.oracle.com/technology/obe/10gr2_db_vmware/security/tde/tde.htm
Hope this helps,
Peter
Maybe you are looking for
-
Is there a way to delete the elements on the stage that start with / Stage_
I'm not sure when it happened, but I noticed that in edge some of my stage elements have dupes below the list of regular elements. When hovered over they say <div> "NAME_OF_DIV" (static) (NAME_OF_DIV is just meaning that it can have many different na
-
How do I install and use Photoshop actions
I downloaded a zipped file with actions. I've left the file zipped until I learn how to install the actions in Photoshop CC. Any help will be appreciated.
-
Hi I copied our entire music folder from our old pc on to the new imac, and all the apps, music etc is there, but no individual libarys, we had 5 very different ones, when pressing and holding the alt key on opeing itunes, nothing happens it just ope
-
Hi all, I have a problem with hierarchy derivation . I can't use standard derivation (type H) because I should use two different hierarchies (on 0ACCOUNT) in the 'Characteristic Rels' folder of the Planning Area. Since I'm allowed to use only one in
-
Hyperlinks in Adobe Flash Player 11
I created a document in indesign that's meant to be emailed to clients. To make it interactive I exported it as Shockwave Flash Object. After seeing that the hyperlinks were not working, I searched the forums and found the answer to allow them, but u