Segments E1BPACGL09 and E1BPACTX09 in Idoc type ACC_DOCUMENT03

Hi,
Is it mandatory to use E1BPACGL09 and E1BPACTX09 as the same time for idoc type ACC_DOCUMENT03 and message type ACC_DOCUMENT ?
If we use both the segment at the same time then at the time of posting this idoc through BAPI_ACC_DOCUMENT_POST, this idoc ending up with the error message "FI/CO interface: Line item entered several times".
On further debug i found this error message comes if we use both the segments.
In segment E1BPACGL09 we have value for fields
ITEMNO_ACC
GL_ACCOUNT
TAX_CODE
COSTCENTER
ORDERID
DE_CRE_IND
In segment E1BPACTX09 we have value for fields
ITEMNO_ACC
ACCT_KEY
TAX_CODE.
Thanks,
Asit Purbey.

Hi
I see that you have problems with fields related with taxes. So, check if SAP Note 367175 - No tax calculation function in FI/CO BAPIs is relevant.
I hope this helps you
Regards
Eduardo

Similar Messages

  • Idoc segment for shpmnt notification for idoc type shpmnt02

    Hi gurus,
               I have to find the idoc segment for shipment notification,idoc  type which we are going to use is shpmnt02 or shpmnt01,Can any one of you please tell me the idoc segments for this idoc type with fields and table name?.Thanks in  advance.

    Hi Nagarathinam
    You can use transaction WE60 for documentation on IDOCs
    Best regards,
    Chris

  • Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).

    Hi All,
    1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
    --- Seeburger Workbench
    --- Seeburger Mapping Designer (BIC)
    --- Seeburger Counter and Varaibles
    --- Seeburger AS2 Spoke
    --- Any other Seeburger Component setting required
    I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
    2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
    3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
    Regards

    Hi Rickkk,
    1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
    --- Seeburger Workbench
    --- Seeburger Mapping Designer (BIC)
    --- Seeburger Counter and Varaibles
    --- Seeburger AS2 Spoke
    --- Any other Seeburger Component setting required
    For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
    /people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
    2
    2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
    For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
    3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
      The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
    Thanks,
    Ram.

  • Segments E1EDK04 and E1EDK05 in IDOC ORDERS05 for PO's

    Hi all,
    I am using program RSNASTED and form ALE_PROCESSING to generate IDOC ORDERS05 for purchase orders. This works fine but, eventhough the purchase orders contain tax conditions (NAVS) and several header discounts (e.g. RA01), the relevant segments, E1EDK04 and E1EDK05, are not included in my IDOC.
    Anyone have an idea how to include these segments?
    Thanks and regards, Patrick

    Michal_Krawczyk_PIXI wrote:
    Hi,
    >
    > if your SAP version is <4.6A then you need to do it manually
    > if not then it should work automatically
    >
    > Regards,
    > Michal Krawczyk
    Michal, Sorry it is not working as expected.

  • Include segment in Control record of  idoc type PEXR2002 and PAYEXT

    Gurus
    This is business scenario. We are using four different flavours of payment methods. when exectuing F110 for each payment method,Program RFFOEDI1 generates IDOC. This IDOC are send to EDI team who then sends that as EDI820 to bank.
    The payment method used are populated in Detail record field of IDOC . But EDI team wants that to be in Control record of IDOC .
    We are using PEXR2002 and message type is PAYEXT . this is an outbound IDOC .
    Is it possible to add segement in control record for each payment method?.
    Thanks for your time and consideration
    Auroar

    It may depend on how the IDoc is created.
    From a file.
    Sent via a Remote Call.
    You would then need to code it for this Message type only.
    I would take a copy of the standard Function and change that. You would have greater control then.
    Why is the partner number wrong anyway. Can you not just create another partner profile(s).
    Message was edited by:
            Martin Shinks

  • Adding a segment to a Basic IDOC type

    Hi every one,
    How do i add a segment that I have created to an existing Basic Idoc type ?.
    Can some one give me a solution for this.
    Thanks,
    Arul.

    hi ,
    Idoc extension can be done with 4 steps
    1. creation of new extension type and a new segment
    2. creation of a idoc type
    3. link idoc type to message type
    4. check the idoc type.
    1. creation of new extension type and a new segment
    we30--idoc typesobject name-extension type-create-create new-create-place the cursor on the location
    2. step:
    we30----
    3. we82 or we 30
    4. WEDI
    If you find it useful plz mark the points
    Regards,
    Naveen

  • Adding new segment to IDoc type DELVRY03

    Hello everybody!
    I just got a request to add two new segments to an Idoc (type DELVRY03) under the segment E1EDL24. (E1EDL43 and E1EDL41).
    They told me to use the userexit EXIT_SAPLV55K_004 to add the new segments using the table IDOC_CONTROL since it is standard. But the problem is that the changes are not been saved.
    I realised that by the time that this exit is called the standard already stored the information on EDID4.
    I appreciate any help!
    Thanks in advance!

    Hi Kumar,
    If we change EDBAS table data and modify my idoc type by adding segment.
    after completing process have to move my object to production.
    Hope it ll through an error...   because it will check with table data also for validation.
    could you please justify your answer kumar?
    Thanks for your helpful information.
    Regards,
    BALAJI.

  • Difference between message type and idoc type

    Hi
    difference between message type and idoc type
    Regards
    Rama

    Hi,
    Message Type:
    A message type represents the application message exchanged between R/3 systems and R/3 and an external system. A message type characterises the data sent across systems and relates to the structure of the data called an IDOC type.
    Diff. with IDOC type
    An IDoc type specifies the structure of the data.
    A message type specifies the meaning of the data
    Diff. b/w IDOC type and IDOC
    An IDoc type is the definition of a specific data structure.
    An IDoc is an actual instance of data based on an IDoc type. Therefore, there can be many IDocs created from a single IDoc type.
    Example:
    MATMAS is the message type and MATMAS05 is IDoc type for Material Master.
    Thanks,
    Shankar

  • Query on idoc type creation

    hi,
    1.How can we rectify the warning messages thrown out during the process of creating a new idoc type-for extending a new segment?
    2.If a idoc type is created and released with warning messages-how to delete that?
    With Regards,
    Srividya

    Hi,
    You can use transaction  <b>BD87</b> to reprocess errorneous IDOC.
    You can also use transaction <b>WE19</b> to generate/regenerate the IDOC.
    Let me know following so i can help you finding the solution.
    - IDOC is inbound or outbound?
    - Which document triggers the idoc OR which document is being posted thru IDOC
    - What is the IDOC type?
    - What is tje Extension type and where have you added extension segments?
    - What message type and process code you are using?
    - How are you populating the extension segments? Which user-exit?
    - What error are you getting?
    Let me know these things so i can help you.
    Regards,
    RS

  • Restructuring the basic IDoc type DELVRY03

    Hi experts,
    My rek  is to restructure the Basic Idoc type DELVRY03 for outbound delivery.
    I am using IDOC_OUTPUT_DELVRY.
    Is there any exit or badi for this.
    Thanks

    we31:
    Create your new segment.
    Save and remember release (edit-set release)
    we30:
    Create your new idoc type. Create like extension.
    In your linked idoc type fill your standard idoc type.
    Press create new sement button for add segments and put your Z segment created in we31 with min and max quantity.
    Save and release the idoc type
    Regards

  • IDoc type

    Hi
    I am a middleware ETL developer and new to SAP. I need to create an iDoc through datastage iDoc load stage to populate the following tables
    PSFC_DISP
    MEPO_TOPLINE
    MEREQ_TOPLINE
    AUFK custom appends.
    I wanted to know which iDoc type would be most suitable for the job ?
    Thanks
    S. J. C

    Hi Chanda,
    go for custom idoc..
    use the following steps to create..
    Define segments: WE31
    Create new basic idoc type: WE30
    Create message type: WE81
    Link message type to IDOC basis type: WE82
    Create RDC destination: SM59
    Create logical system: SALE
    Create port: WE21
    Create partner profile: WE20
    Set up distribution model (If necessary): BD64
    Regards,
    Prabhudas

  • IDoc types supported by ECC 6

    Hi Friends,
    Could you please let me know what are all IDoc types are supported by ECC 6.0?
    Any documents or link would be more helpful.
    Regards,
    Krish

    Hi Krish,
    Go to Tcode: WE30 and do a F4 on the Obj. Name field this will list all the IDOC Types supported by SAP, to get more information go to WE60(you could do a F4 here too - against Basic Type) and use the IDOC Type to read the documentation for the same.
    Regards,
    Chen
    Edited by: Chen K V on Jun 15, 2011 10:51 AM

  • Incorrect IDoc type ZSBB010 in the ALE defintion of the source system.

    Hi,
    We have done client copy of BW production system into BW test system.
    I am getting following error while checking Test R/3 system in BW Administrator workbench.
    Diagnosis
    Incorrect IDoc type ZSBB010 in the ALE defintion of the source system.
    System response
    Error when sending data to BW.
    Procedure
    Enter IDoc type ZSBB017 .
    Ring any bell.. Thank you for Ur time..
    Cheers
    Senthil

    Hello Senthil,
    Please check WE20 transaction and look for idoc type there.Most likely you need to make some corrections in there.  Also check BD64.
    Regards.
    Ruchit.

  • How  can create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version

    Hi All,
                Can any one help, how  to create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version.This is my task.
    Given BADI name was----VENDOR_ADD_DATA_BI .
    Thanks

    Anil,
    look at this thread ..may be this helps you.
    Re: 824 IDOC and BADI/User Exit
    sateesh.

  • IDOC type and segment's BasisRelease number

    Dear expert,
    May i know is there a way to change the IDOC type and segment's BasisRelease number when i try releasing IDOC. Any special TCode?
    Please comment.
    Thanks in advance.

    FYI, I'm CRM5.0, SAP_BASIS release 700.

Maybe you are looking for

  • How to pass input field value from one region to another ?

    What I am trying to do : I have one page with 1 region with one text field and an apply button and a report region. I want to be able to enter a value in the text field, click on apply and exploit this value in the source of the report region. Of cou

  • What should i do? i do not know what happened with my external hard after connected with mac OS...

    hello...I am new user of mac OS...I connected my external hard with my laptop...After that my hard detected but there is no space and no files, everything. It has only one .exe file but it is giving error...even it is same on Windows...i have some ve

  • No thumbnails for images?

    Hello, I downloaded some images from the Web. Some of them do have thumbnails, but some of them don't, and just show up with a paper sheet icon. It's very inconvenient. How to make thumbnails appear? Thank you.

  • HT4623 My early iPad has ios5.  How can I upgrade to ios6

    I find that some apps will not load onto my ipad with ios5.1.1.  How can I upgrade to ios6?

  • Array as Instance Variable

    Friends, Hope you can get me on the right track with this. I have an array (that must be an instance variable of type double) : private double[] myArray; that stores two values at each index: double length char unitOfMeasure We have to develop a meth