Select amount field of a table with decimal place of 3rd value grater than 0.

Select all the reord in a table with amount decimal place of 3rd value grater than 0.

Can you show the sample data + desired result?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Similar Messages

How to select and field from an table with similar value

Hi Gurus,
I got an requirement where i need to capture some values from an table whose value start with "vmr*"
could anyone tell me the syntax to be used with this?
My table contains valies like "lrt", "vmr'" nut i need only values starting with "vmr"*
Ravi

Hi,
In where clause, you can write,
where field like 'vmr%'.
Hope this helps.
Reward if helpful.
Regards,
Sipra

Select all fields of a table while designing the layout of a query

Can some one tell me how to select all fields of a table at a single stroke while designing the layout of a query....this would greatly reduce the time spent to select each and every field of a table into the layout....
Thanks in advance

Hi,
Declare your internal table (Say it is itab).
Then :-
Select * from <tablename>.
Eg,.Select * from mara.
Then display it using:-
Loop at itab.
write:/ wa_itab. "Workarea.
endloop.
Thanks and regards,
Prerna

Select max date from a table with multiple records

I need help writing an SQL to select max date from a table with multiple records.
Here's the scenario. There are multiple SA_IDs repeated with various EFFDT (dates). I want to retrieve the most recent effective date so that the SA_ID is unique. Looks simple, but I can't figure this out. Please help.
SA_ID CHAR_TYPE_CD EFFDT CHAR_VAL
0000651005 BASE 15-AUG-07 YES
0000651005 BASE 13-NOV-09 NO
0010973671 BASE 20-MAR-08 YES
0010973671 BASE 18-JUN-10 NO

Hi,
Welcome to the forum!
Whenever you have a question, post a little sample data in a form that people can use to re-create the problem and test their ideas.
For example:
CREATE TABLE     table_x
(     sa_id          NUMBER (10)
,     char_type     VARCHAR2 (10)
,     effdt          DATE
,     char_val     VARCHAR2 (10)
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0000651005, 'BASE',    TO_DATE ('15-AUG-2007', 'DD-MON-YYYY'), 'YES');
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0000651005, 'BASE',    TO_DATE ('13-NOV-2009', 'DD-MON-YYYY'), 'NO');
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0010973671, 'BASE',    TO_DATE ('20-MAR-2008', 'DD-MON-YYYY'), 'YES');
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0010973671, 'BASE',    TO_DATE ('18-JUN-2010', 'DD-MON-YYYY'), 'NO');
COMMIT;Also, post the results that you want from that data. I'm not certain, but I think you want these results:
`    SA_ID LAST_EFFD
    651005 13-NOV-09
10973671 18-JUN-10That is, the latest effdt for each distinct sa_id.
Here's how to get those results:
SELECT    sa_id
,         MAX (effdt)    AS last_effdt
FROM      table_x
GROUP BY sa_id
;

Adding Amount field in BSEG table and display it single line item?

hi experts,
 I am doing credit / debit form now my requirement is
 According to BELNR , GJAHR,BUKRS i want to find credit amount for this selection cretiria.
 so i want to add all the lines of amount filed for a particular BELNR and display it as single line.
so i am getting data from print program like this
SELECTION-SCREEN BEGIN OF BLOCK b0 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP 2.
PARAMETERS: p_belnr LIKE bkpf-belnr OBLIGATORY,
 p_bukrs LIKE bkpf-bukrs OBLIGATORY,
 p_gjahr LIKE bkpf-gjahr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b0.
SELECT SINGLE *
 FROM bkpf
 INTO i_bkpf
 WHERE belnr = p_belnr
 AND ( blart = 'DG' OR blart = 'ZG' )
 AND bukrs = p_bukrs
 AND gjahr = p_gjahr.
IF sy-subrc = 0.
 SELECT *
 FROM bseg
 INTO table it_bseg
 WHERE belnr = i_bkpf-belnr .
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 formname = 'Z_CREDIT_DEBIT' " p_name
VARIANT = ' '
DIRECT_CALL = ' '
 IMPORTING
 fm_name = v_form_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION v_form_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
 i_bkpf = i_bkpf
 i_bseg = i_bseg
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
so my I_BSEG containing all line items of particular BELNR . with the field SHKZG iam getting only credit line items .
now i want to do is add all credited amount and display like this in a table.
against ref# (BSEG-REBZG) ! details (BSEG-SGTXT)! amount
124569 10%discount 950.00(total amount ie sum of all lines amount for a BELNR)
 10.00(total tax amt ie sum of all lines of tax amount for a BELNR)
 960.00

hi arun,
 i used collect in smartform my procedure is like this .
 i am getting data into i_BSEG because i declared like this in TABLES parameter
 i created a loop .
 in that i mentioned like I_BSEG into WA_BSEG.
 then i created a program lines here i mentioned like this.
 COLLECT WA_BSEG INTO IT_BSEG.
 but because of BUZEI "Number of Line Item Within Accounting Document .it is not same it is varying for every credited time that means for every line of BELNR. thats why it is not adding it is just appending .
so pls tell me any other chance to find sum .
because i want to sum up all credted amount and display it in single line
ie first column REBZG "Number of the Invoice the Transaction Belongs to(against ref) i want to display once .
And Second column SGTXT "item text(details) for amount once and for tax amount once
And Third column Amount first line consists total amount & second line consists total for tax amount
regards,
satheesh.
[email protected]
any doubts chat me regarding this post.

Trigger to update field on a table with the sum of fields on another table

My experience creating triggers and pl/sql in general can best be described in oracle terms as null. I've been practicing by creating tables and applications on my personal home server to help me with some of my work related tasks. Right now I'm trying to create a trigger that will, after insert, update, delete on the assignment_time_track table update the time_spent field on the assignments table with the sum of the time_spent fields on the assignment_time_track table. Hopefully that run on sentence there is clear to people other than myself. I've attempted to script this on my own using the trigger creation tool for Oracle Database Express Edition but I get the following error:
Trigger create was not successful for the following reason:
ORA-06552: PL/SQL: Compilation unit analysis terminated ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
Here is my attempt at creating the trigger on my own.
create or replace trigger "ASSIGNMENT_TIME_TRACK_T1"
AFTER
insert or update or delete on "ASSIGNMENT_TIME_TRACK"
for each row
begin
update assignments
set time_spent = (select sum(time_spent)
from assignment_time_track
where assignment_time_track.name = assignments.name);
end;
If what I've posted isn't clear or more detail is needed, let me know and I'll respond with a complete description of both tables and my goals for each table. Thanks in advance for any help. I will also gladly accept links to tutorials or lessons that explain how to do this sort of thing.
Edited by: bobonthenet on Mar 9, 2009 2:01 PM

Hi,
If the assignments table has only one row per assignment, why is the primary key the combination of name and time_spent? If you have two two assignments called "Lab Report", isn't it possible that you would spend the same amount of time on each of them? I suggest using a sequence to assign an arbitrary id number to each assignment, and use that as the primary key.
What does each row in assuignment_time_track represent? It sounds like it is a chunk of time spent on one assignment (that is, you want to know that you spent 90 minutes on Tudesday morning working on some assignment, and that you spent another 30 minutes on Tuesday afternoon working on the same assignment). If so, then there should be a foreign key constraint in assignment_time_track referencing the primary key of assignemnt, and not the other way around.
Alex is right; you can get the total time spent on each project in a query or view; there is no need to replicate that data.
If you're new to Oracle and SQL, you should invest your time in getting more experience with the basics: everyday things like queries (using joins and GROUP BY) and views, and not spend much time on things that aren't used that much, like triggers.
If you really did have to copy the data, then you could have a trigger on assignemnt_time_track that kept the total in assignment up to date, like this:
UPDATE assignment
SET     total_time_spent = total_time_spent
                + NVL (:NEW.time_spent, 0)
                         - NVL (:OLD.time_spent, 0);I suggest you name the column in assignment something different than the column in assignment_time_track, to reduce the risk of confusion. Also, since they represent different things, the same name can't be the most descripttive for each of them.
In case you're wondering about the use of NVL, above: It allows the same statement to take care of the situation when you INSERT, UPDATE or DELETE a row in assignment_time_track. That is, if you UPDATE a row in assignment_time_track, and change the time_spent from 60 to 90, then you want to add the new time (90) and subtract the old time (60) fro the total_time_spent in assignment: that is, total_time_spent would increase by 30. If you INSERT a new row into assignment_time_track with time_spent=30, you just need to add the new time_spent (30): there is nothing to subtract. But rather than write an IF statement and a second UPDATE for that situation, you can just rely on hte fact that all :OLD values are NULL iwhen INSERTing, and treat that NULL as a 0. Likewise, when DELETing, all :NEW values are NULL..

Problem inserting a gif into a blob field in a table with sqldev / forms6i

Problem solved - For those that might be interested, the errors don't make much sense - the problem was with the gif. Seems that these 28 gifs plus the new scans were saved from the scanner with
GIF - LZW, Transparent color: 255
Converting them to Black and white allowed them to be loaded.
If anyone understands why, I'd like to know
glenn
I was previously having a problem deleting a row with a blob and it was suggested that I create the table using rowdependencies - which I did as follows.
CREATE TABLE "MDD"."MDD_FIGURE2"
(     "FG_FIGURENAME" VARCHAR2(18 BYTE),
     "FG_FIGURE" BLOB,
     CONSTRAINT "FG_FIGURENAME_NN" CHECK ("FG_FIGURENAME" IS NOT NULL) ENABLE
) ROWDEPENDENCIES;
Then I copied my data from my previous table with the following - and everything came across
INSERT INTO MDD_FIGURE2 (fg_figurename, fg_figure)
SELECT FIG_FIGNAME, FIG_FIGURE FROM MDD_FIGURE;
mdd_figure2 was then renamed to mdd_figure
The table, Mdd_Figure, already contains some 2000+ .gifs that were successfully loaded with Forms 6i (yes, I know it is old, but I am stuck with having to use it). All the .gifs I am loading are from scans and all are less than 64k. However, 28 .gifs would not load. When I insert the .gif into the field and committed the form, the status message tells me a record was written but when I check it, the blob is empty.
So, when I try to insert one of these problem .gifs in SqlDeveloper, I open the new mdd_figure table, select the blob field, open the edit dialog, set it to figure, select the .gif that I want to load and then save it. The blob field changes from NULL to BLOB, but it is empty. When I try to commit, I get the following error from SqlDev.
UPDATE "MDD"."MDD_FIGURE" SET WHERE ROWID = 'AAAOeWAAEAAABAlAAz' AND ORA_ROWSCN = '358136842'
One error saving changes to table "MDD"."MDD_FIGURE":
Row 14: ORA-01410: invalid ROWID
I use rollback to restore the record to it's previous state.
If I load one of the successfully loaded .gifs into the same field, it loads perfectly as follows.
UPDATE "MDD"."MDD_FIGURE" SET WHERE ROWID = 'AAAOeWAAEAAABAoAAp' AND ORA_ROWSCN = '358136522'
Commit Successful
It appears the 28 gifs have a problem. I've re-scanned them, with the same results. They are just small scanned line map images from our earlier publications. They view properly in several different graphics programs and I can't find anything wrong with them.
I notice that the ROWID's are different while the ORA_ROWSCN's are the same - but what is the significance of that?
Any suggestions as to what is happening and what I can do about it?
Thanks for any help you can give me.
glenn
(Database is 10R2 and sqldev is the most recent one)
Edited by: gconley on Sep 25, 2008 9:51 PM

solved it myself - problem was with the gif

How to select one row in a table with radio button

Hi all.
I have a VO where there is an attribute (isDefault [String]) that identifies the default record in the view. The possible values are 'Y' for yes and 'N' for no. Obviously only one record can have the 'Y' value.
In my page I have created an ADF Table (with the usual data control drag & drop). I would to transform the default inputText of "isDefault" field with a selectOneRadio component in order to permit the user to select (and save contextually in the DB) the default row of this table.
Can you explain me how? I'm using JDeveloper 11.1.1.4.
Thanks in advance.
Baduel

Baduel wrote:
Cvele,
thanks for your responses. Yes, it's easier to use af:selectBooleanCheckbox but I need that the selection is mutually exclusive (only one row can be selected). >If this is possible also with the boolean checkbox please tell me how.- Let's try with CheckBox :
1. At the ViewObjectImpl level (for example, YourViewObjectImpl), add the following code:
private oracle.jbo.Key currSelectedRowKey = null;
public void doRowSelection(Key newKey) {
      // de-select old one
      if (currSelectedRowKey != null) {
          Row[] rows = findByKey(currSelectedRowKey, 1);
          if (rows != null && rows.length > 0)
               rows[0].setStatusAsBoolean(Boolean.FALSE); // cast to the appropriate row Impl class if need !
     // remember a new selected row key:
    currSelectedRowKey = newKey;
}In the ViewRowImpl, in the transient attr settter, do as follows:
public void setStatusAsBoolean(Boolean value) {
     setStatus(value.booleanValue() ? ONE : ZERO);
     if (value.booleanValue()) {
         YourViewObjectImpl vo = (YourViewObjectImpl)getViewObject();
         vo.doRowSelection(getKey());
   }   P.S. The above was not tested at all, but should give you an idea

Select query for 6 different tables with vbeln as same selction criteria

Hi,
I have a query..
I am using 6 differnet tables with vbeln being the same primary key on the basis of which i have to match the data.
I have assign vbeln with different name but in the select query it gives me the error that vbeln2 is not the correct field.
Can anyone please suggest how can i use the different field name and read the data from the table.

hi,
Use alias name for fields / tables in select query, problem will solve
Regards,
Praveen Savanth.N

Urgent...... how to select few fields, from database table, (dynamic ita.)

Dear all experts,
I am able to populate all fields data from database table, using dynamic table creation.
eg,
SELECT * FROM (w_tabname) INTO TABLE <t_itab>.
where w_tabname is the table name given by the user, and t_itab is field symbol.
but some requirement is like that i need to pick up only few fields, which user will give at the runtime.
I can take those fields from file into any internal table,
but the problem is that instead of select *, i need to put selected the fields given by user.
i have tried with field symbol, it is not working (as per my knowledge.)
do i need to create any structures dynamically ?
Can anybody please help in this regards ?
Your help will be surely rewarded with points.
Waiting for reply..
Regards
Vinay

Hi Vinay ,
Adding to the below code , you can use some more fields in the select stmt as below:-
REPORT ychatest.
PARAMETERS : p_field1 LIKE dd03l-fieldname,
 P_field2 LIKE dd03l-fieldname,
 p_table LIKE dd03l-tabname.
FIELD-SYMBOLS : <fs> TYPE STANDARD TABLE.
SELECT (p_field1) (p_field2) ( FROM (p_table) INTO TABLE <fs>.
Now p_field1 & p_field2 belong to the same table since you have give the user to enter only one table name.
This should work fine.
please try & let me know .
Thanks & Regards,
Daniel

Problem with update of BLOB field in a table with compound primary key

Hi,
I've been developing an application in Application Express 3.1.2.00.02 that includes processing of BLOB data in one of the tables (ZPRAVA). Unfortunately, I've come across a strange behaviour when I tried to update value in a BLOB field for an existing record via a DML form process. Insert of a new record including the BLOB value is OK (the binary file uploads upon submiting the form without any problems). I haven't changed the DML process in any way. The form update process used to work perfectly before I'd included the BLOB field. Since than, I keep on getting this error when trying to update the BLOB field:
ORA-20505: Error in DML: p_rowid=3, p_alt_rowid=ID, p_rowid2=CZ000001, p_alt_rowid2=PR_ID. ORA-01008: not all variables bound
Unable to process row of table ZPRAVA.
OK
Some time ago, I've already created another application where I used similar form that operated on a BLOB field without problems. The only, but maybe very important, difference between both the cases is that the first sucessfull one is based on a table with a standard one-column primary key whereas the second (problematic one) uses a table with compound (composite) two-column PK (two varchar2 fields: ID, PR_ID).
In both cases, I've followed this tutorial: [http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm]).
Can anybody confirm my suspicion that Automatic Row Processing (DML) can be used for updating BLOB fields within tables with only single-column primary keys?
Thanks in advance.
Zdenek

Is there a chance that the bug will be included in the next patch?No, this fix will be in the next full version, 3.2.
Scott

Select count from large fact tables with bitmap indexes on them

Hi..
I have several large fact tables with bitmap indexes on them, and when I do a select count from these tables, I get a different result than when I do a select count, column one from the table, group by column one. I don't have any null values in these columns. Is there a patch or a one-off that can rectify this.
Thx

You may have corruption in the index if the queries ...
Select /*+ full(t) */ count(*) from my_table t
... and ...
Select /*+ index_combine(t my_index) */ count(*) from my_table t;
... give different results.
Look at metalink for patches, and in the meantime drop-and-recreate the indexes or make them unusable then rebuild them.

Map Lookup Fields of a Table with Portal Iview

Hello,
I am creating a MDM Results Set Iview on Portal which is referencing an MDM Table with some fields. One of these fields initself is a Second Table with 3 more fields. I am able to map the Second Table as a Column for Display in the iView as it is there as an Available Column.
But I want to map just one of the individual field in the Second Table to a Column of iView for Display so that it does not display the other 2 fields of the Second Table. How can I achieve the same in the iview ?
Any help would be highly appreciated.
Thanks.

HI,
These elements you are talking about can be Tuples or Qualified tables.
Please follow these SAP Notes 1325508 (MDM 7.1SP02) and 1364188 (MDM7.1SP03).
And working with Tuples here:
http://help.sap.com/saphelp_mdm71/helpdata/en/49/db9b2a175c58c1e10000000a421937/frameset.htm
Thanks,
Ravi

Please Help. How to access to an input field in a table with javascript

Hi
i�m trying to access to the content of an input field that is in an table with a javascript function in this way
function Valida_Tabla()
var centro = document.getElementById("form1:idcentro").value;
alert("Centro es ["+centro+"]")
var des = document.getElementById("form1:table1:0:textField2").value;
alert("des ["+des+"]")
The fisrt alert is ok and displays the value of a field that is in a table.
The second alert is not displayed.
Is the syntax wrong?
what i�m doing wrong
Please help

The best bet is to look at the source of the generated HTML and then use the exactly generated ID in the HTML source. When I looked at the HTML source I see the ID of a textfied inside a table as
form1:table1:tableRowGroup1:0:tableColumn1:textField1
- Winston
http://blogs.sun.com/roller/page/winston?catname=Creator

Select count(x) on a table with many column numbers?

Hi all,
i have a table with physical data with 850 (!!) colums and
~1 Million rows.
The select count(cycle)from test_table Statement is very, very slow
WHY?
The select count(cycle)from test_table is very fast by e.g 10 Colums. WHY?
What has the number of columns, to do with the SELECT count(cyle).... statement?
create test_table(
cycle number primary key,
stamp date,
sensor 1 number,
sensor 2 number,
sensor_849 number,
sensor_850 number);
on W2K Oracle 9i Enterprise Edition Release 9.2.0.4.0 Production
Can anybody help me?
Many Thanks
Achim

hi lennert, hi all,
many thanks for all the answers. I�m not an Oracle expert.
Sorry for my english.
Hi Lennert,
you are right, what must i do to use the index in the
query? Can you give me a pointer of direction, please?
Many greetings
Achim
select count(*) from w4t.v_tfmc_3_blocktime;
COUNT(*) ==> Table with 3 columns (very fast)
306057
Ausf�hrungsplan
0 SELECT STATEMENT Optimizer=CHOOSE
1 0 SORT (AGGREGATE)
2 1 TABLE ACCESS (FULL) OF 'V_TFMC_3 _BLOCKTIME'
Statistiken
0 recursive calls
0 db block gets
801 consistent gets
794 physical reads
0 redo size
388 bytes sent via SQL*Net to client
499 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed
select count(*) from w4t.v_tfmc_3_value;
COUNT(*)==> Table with 850 columns (very slow)
64000
Ausf�hrungsplan
0 SELECT STATEMENT Optimizer=CHOOSE
1 0 SORT (AGGREGATE)
2 1 TABLE ACCESS (FULL) OF 'V_TFMC_3 _VALUE'
Statistiken
1 recursive calls
1 db block gets
48410 consistent gets
38791 physical reads
13068 redo size
387 bytes sent via SQL*Net to client
499 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed

Select amount field of a table with decimal place of 3rd value grater than 0.

Similar Messages

Maybe you are looking for