Select into internal table

Hello abap-gurus,
I have a small problem when doing a select into an internal table. As i select and append into an internal table, the program dumps as there is not enough memory for the internal table. The SAP-table i'm selecting from is simply too big. So I'm wondering if there is a way to stop or set the max lines in the internal table to say 10000 rows? I would appreciate any example.. the statement looks like this:
SELECT * INTO l_bdcpv
FROM bdcpv
WHERE not process = 'X'
AND mestype = 'ISM_MATMAS'.
APPEND l_bdcpv TO i_bdcpv.
ENDSELECT.
Best regards Ballo

HI,
DATA: I_BDPCV LIKE BDPCV OCCURS 0 WITH HEADER LINE.
SELECT * FROM BDPCV INTO I_BDPCV UP TO 100 ROWS WHERE PROCESS NE 'X' AND MESTYPE = 'ISM_MATMAS'.
APPEND I_BDPCV.
ENDSELECT.
Regards
CNU

Similar Messages

How to join THREE different tables into internal table using one select statement .

How to join THREE different tables into internal table using one select statement .
Hi experts,
I would like to request your guidance in solving the problem of joining the data from three different database tables into one internal table
Scenario:
Database tables:
SPFLI
SFLIGHT
SBOOK.
Table Fields:
SPFLI - CARRID CONNID COUNTRYFR CITYFRM COUNTRYTO CITYTO
SFLIGHT - CARRID CONNID FLDATE SEATSMAX SEATSOCC SEATSMAX_C
SEATSOCC_C SEATSMAX_F SEATSOCC_F
SBOOK - CARRID CONNID CLASS
MY INTERNAL TABLE IS IT_XX.
Your help much appreciated.
Thanks in advance.
Pawan.

Hi Pawan,
please check below codes. hope it can help you.
TYPES: BEGIN OF ty_xx,
        carrid     TYPE spfli-carrid   ,
        connid     TYPE spfli-connid   ,
        countryfr TYPE spfli-countryfr,
        cityfrom   TYPE spfli-cityfrom ,
        countryto TYPE spfli-countryto,
        cityto     TYPE spfli-cityto   ,
        fldate     TYPE sflight-fldate ,
        seatsmax   TYPE sflight-seatsmax ,
        seatsocc   TYPE sflight-seatsocc ,
        seatsmax_b TYPE sflight-seatsmax_b,
        seatsocc_b TYPE sflight-seatsocc_b,
        seatsmax_f TYPE sflight-seatsmax_f,
        seatsocc_f TYPE sflight-seatsocc_f,
        class      TYPE sbook-class,
      END OF ty_xx,
      t_xx TYPE STANDARD TABLE OF ty_xx.
DATA: it_xx TYPE t_xx.
SELECT spfli~carrid
       spfli~connid
       spfli~countryfr
       spfli~cityfrom
       spfli~countryto
       spfli~cityto
       sflight~fldate
       sflight~seatsmax
       sflight~seatsocc
       sflight~seatsmax_b
       sflight~seatsocc_b
       sflight~seatsmax_f
       sflight~seatsocc_f
       sbook~class
INTO TABLE it_xx
FROM spfli INNER JOIN sflight
ON spfli~carrid = sflight~carrid
AND spfli~connid = sflight~connid
INNER JOIN sbook
ON spfli~carrid = sbook~carrid
AND spfli~connid = sbook~connid.
Thanks,
Yawa

Insert into internal table

Hi Experts,
I am new comer to ABAP, have some very important task to be done, need help from all of you. I have a program which displays the results(inform about the infocubes). I want to insert the output of this prgm into an internal table, I am looking lot into the documentation, but so far not much help and i am not able to execute it. And one more task, I want to join this internal table and one database table and get the result, my question is , Is it possible to join this internal table and database table based on some common field.
Any help will be of grt help
Thanks,
Hem.

Hi,
For joining internal table with database table,you need to write the logic as below.
This is the pseudo code.
select * from database into table itab2 where condition.
loop at itab1 into wa1.
   move-corresponding wa1 to wa3.
   loop at itab2 into wa2 where field = wa1-field.
    move-corresponding wa2 to wa3.
   endloop.
   append wa3 to itab3.
endloop.
1. select the required data from database table into internal table.
2. loop the first internal table which you already have.
3. Based on the key fields in these two internal tables[database],place the condition in READ or LOOP statement for the second internal table inside the loop of the first internal table.
4. If there are more records in second internal table for a single record in first internal table,then use LOOP the second internal table within the first internal table.Otherwise, read the second internal table within the first internal table.
5.Then move the corresponding fields from both the internal tables inside the loop to third internal table.Append the record to the third internal table.
Hope it helps.
Regards,
J.Jayanthi

Collect message into internal table

Hi,
does any one knows how BAPIs or CALL TRANSACTIONs collect messages into internal table.
My problem is that some BI with CALL TRANSACTION doesn't collect right message into return table and I would like to collect this last message after CALL TRANSACTION and therefore be sure that everything went OK.....
thx
mario

hi
good
check this
Call Transaction p_trans using ZBDC_Table
                               Mode p_mode
                             Update p_update
                      Messages into p_messages.
     Move sy-subrc to w__subrc.
   Scan the messages in YDCRAISES to see if we need to
   change the message class.
     Loop at p_messages.
          Select single msgtyp
            into w__msgtp
            from zdcraise
           where tcode = p_messages-tcode and
                 msgid = p_messages-msgid and
                 msgnr = p_messages-msgnr.
          If sy-subrc = 0.
             Move w__msgtp to p_messages-msgtyp.
             Modify p_messages.
          EndIf.
     EndLoop.
   Dump the message table ?
     If w__ydcset-dumpmsg = True.
thanks
mrutyun^

How to transfer data of RFC into Internal Table inside a WD4A program?

Hi Experts,
I have created WD4A program. This program calls RFC. The output of RFC has to populate a UI table. THe different cells of the table should have different color based on data.
I have gone through following link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/707fb792-c181-2d10-61bd-ce15d58b5cf1
The above link fetches data from directly from table. Then it passes the data into internal table.
If I am using RFC, then how I can insert data of RFC into a internal table in WD4A program (se80 In drop down Web Dynpro Comp / Intf)
My motto is to have table ouput whose different cells should have different color based on data.
Please help.
Regards,
Gary
Edited by: Jason Lax on Dec 28, 2011 2:52 PM (Fixed broken link)

Hi Experts,
I have resolved the issue. I have created WD4A program. This WD4A program calls the RFC.
The RFC has a structure as export parameters called 'RESULT_FINAL'. I have altered the associated type of this table export parameter. I added Component 'Color' of component type 'WDUI_TABLE_CELL_DESIGN'.
In the RFC I have added some code. The code is as below:
loop at it_t1.
      select pernr from pa0000 into table it_t2 where pernr = it_t1-pernr and stat2 ='3'
      and begda <= sy-datum AND endda >= sy-datum.
      if sy-subrc = 0.
        result_final-org_unit = result_objec-objid.
        result_final-pernr = it_t1-pernr.
        result_final-name = it_t1-name.
        result_final-color = '02'.       append result_final.
      endif.
    endloop.
The line   result_final-color = '02'.
code returns Color.
In the WD4A program, I have changed the Cell Design property of selected table coloumn to Color.
This resolved the issue.
Thanks every one for the reply.
I have added above information for other SDN users.
I am closing this thread,
Regards,
Gary

Passing select options internal table to BAPI attributes...

Hello Web Dynpro Gurus,
When I get the values from select options into interna table, how can I pass the same to the attribtues of the importing/exporting nodes of the BAPI by reading the context.
Please help .
Regards,
Jainam.

Hello,
The code in bold below sets attributes of my node one by one for the select option node atttributes i.e. SIGN, OPTION, LOW and HIGH.
Instead of that how can I set all attributes of node which is of type select-options in one shot.
method ONACTIONSEARCH .
DATA: S_WAERS TYPE REF TO DATA.
FIELD-SYMBOLS: <FS_WAERS> TYPE TABLE.
Retrieve the data from the select option
S_WAERS = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'WAERS' ).
Assign it to a field symbol
   ASSIGN S_WAERS->* TO <FS_WAERS>.
   data:
    Node_Rep_Curr                       type ref to If_Wd_Context_Node,
    Elem_Rep_Curr                       type ref to If_Wd_Context_Element,
    Stru_Rep_Curr                       type If_Select_View=>Element_Rep_Curr .
navigate from <CONTEXT> to <REP_CURR> via lead selection
Node_Rep_Curr = wd_Context->get_Child_Node( Name = IF_SELECT_VIEW=>wdctx_Rep_Curr ).
get element via lead selection
Elem_Rep_Curr = Node_Rep_Curr->get_Element( ).
get all declared attributes
Elem_Rep_Curr->get_Static_Attributes(
    importing
      Static_Attributes = Stru_Rep_Curr ).
    Node_Rep_Curr->set_attribute(
    Exporting
      name = 'SIGN'
      value = 'I' ).{code}
endmethod.
Edited by: Jainam Shah on Feb 5, 2010 2:55 PM

How to get data from maintaince view into internal table

Hi,
I want to get the all data from v_t179 (maintanence view) into intrenal table.
if i write select stmt , it is giving error.
I want all data into internal table.
regards,
Ajay

I think this is what you want:
TABLES: t179, t179t.
DATA: v_t179_int TYPE TABLE OF v_t179.
SELECT * FROM t179
JOIN t179t ON
t179~prodh = t179t~prodh
INTO CORRESPONDING FIELDS OF TABLE v_t179_int.
Rob

Download database table content into internal table using Function Module?

HI,
Experts,
I need a function module which can download ddic table content into internal table.
Thank u ,
Shabeer Ahmed.

>
shabeer ahmed wrote:
> HI,
> Experts,
>
> I need a function module which can download ddic table content into internal table.
>
> Thank u ,
> Shabeer Ahmed.
Hi Shabeer,
We don't require a function module to download ddic table content to an internal table. We can use the SELECT statement for the same. Example would be:-
DATA: <INTERNAL TABLE> type table of <DATABASE>.
SELECT * FROM <DATABASE> into corresponding fields of <INTERNAL TABLE>.
Also, function module might be required when you need the data from a remote system, but then it is the developer's task create this function module and the function module should be remote enabled function module.
This remote enable function module should have the above SELECT query as its code.
Many Regards,
Ravi.

How to get editable data into internal table

Hi ABAPers,
I am displaying REUSE_ALV_GRID_DISPLAY report with one editable field and i have post button in report. Once i select post button i need to get editable data to internal table which i passed to REUSE_ALV_GRID_DISPLAY.
actually i am writing below code but data is not coming to internal table.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                          = sy-repid
     i_callback_pf_status_set                  = 'PF-STATUS'
     i_callback_user_command               = 'USER_COMMAND '
     it_fieldcat                                        = t_field[]
     i_default                                          = 'X'
    TABLES
      t_outtab                          =   <fs_display1>.       "t_display
FORM user_command USING g_ucomm LIKE sy-ucomm
               rs_selfield TYPE slis_selfield.
g_test1 = g_ucomm.
CASE g_ucomm.
    WHEN 'POST'.
      READ TABLE <fs_display1> ASSIGNING <fsw_display1> INDEX 1.    "Just for testing index 1
      IF sy-subrc = 0.
        w_display = <fsw_display1>.
        APPEND w_display TO t_display.
        CLEAR : w_display.
      ENDIF.
      PERFORM v1.
      PERFORM bapi_call.
ENDCASE.
ENDFORM.                    "USER_COMMAND
Please help me how to get.
Regards,
Raju.

Hi,
Try the following:
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_pf_status_set = 'PF-STATUS'
i_callback_user_command = 'USER_COMMAND '
it_fieldcat = t_field[]
i_default = 'X'
TABLES
t_outtab = <fs_display1>. "t_display
FORM user_command USING g_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
g_test1 = g_ucomm.
CASE g_ucomm.
WHEN 'POST'.
* to reflect the data changed into internal table
      DATA : ref_grid TYPE REF TO cl_gui_alv_grid. "new
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF NOT ref_grid IS INITIAL.
        CALL METHOD ref_grid->check_changed_data.
      ENDIF.
READ TABLE <fs_display1> ASSIGNING <fsw_display1> INDEX 1. "Just for testing index 1
IF sy-subrc = 0.
w_display = <fsw_display1>.
APPEND w_display TO t_display.
CLEAR : w_display.
ENDIF.
PERFORM v1.
PERFORM bapi_call.
ENDCASE.
ENDFORM. "USER_COMMAND
Hope it helps.
Regards,
Gilberto Li

Loading Text data into internal table

I have a text file to load txt data into internal table. So how to read text data with validation and to load all text data into the internal table?
Say this is the text file:
IO_NAME, IO_TYPE, IO_SHTXT, IO_LONGTEXT, DATATYPE, DATA LENGTH
ZIO_TEST1, CHA, IO TEST1, IO TEST 1, CHAR, 20
ZIO_TEST2, CHA, IO TEST2, IO TEST 2, CHAR, 20
Regards,
Mau

hi Mau,
look this code, maybe it's help u.
<b>REPORT ZTXTTOTABLE.</b>
DATA: p_file   TYPE string value 'C:\teste.txt',
      BEGIN OF TI_table OCCURS 0,
        COD(5) TYPE C,
        NAME(40),
      END OF TI_table,
      a(2).
PARAMETERS: sel_file(128) TYPE c
            default 'C:\teste.txt' OBLIGATORY LOWER CASE.
p_file = sel_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename = p_file
TABLES
    data_tab = ti_table[].
format color COL_TOTAL INTENSIFIED ON.
loop at ti_table.
write: / sy-vline, ti_table-cod, at 10 sy-vline, ti_table-name,
         at 60 sy-vline.
endloop.
write: / sy-uline(60).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_filename     = ''
      def_path         = 'C:\'
      mask             = ',Documentos de texto (*.txt), *.txt.'
      mode             = ''
    IMPORTING
      filename         = p_file
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
    concatenate p_file '.txt' into sel_file.
else.
    sel_file = p_file.
endif.
top-of-page.
format color COL_HEADING INTENSIFIED ON.
uline (60).
write: / sy-vline, 'COD', at 10 sy-vline, 'NAME', at 60 sy-vline.
write: / sy-uline(60).
good luck!
Regards
Allan Cristian

Fetch data into internal table

Hi all,
I want to fetch all the opbel records from erdk table into an intrnal table.
Only opbel records.There are 100000000 records in erdk table.
How can I fetch into internal table ? what statement can I use to fetch the data faster keepin performance into consideration ?
Many thanks

Hi,
As far as data fetch is concerned you do the same as follows:
Select * from erdk into table itab
where..... < Your Where Condition if any>.
But as the number of records are very high, first try to put all the primary keys in the where clause and also if possible, try to narrow down the selection criteria by fetching data from some other table or widening the conditions in where clause.
Also try to fetch only thode fields which you actually need.
else your program will give performance problems.
Hope this helps!
Regards,
Lalit

Extract the classification data into internal table

Hi all,
I having requirement to extract classification data for material number.
1) Provide the selection option for material number (MATNR).
2) Based on the material number, then extract all that data into internal table as below layout. My problem is how to retrieve the following data from different table based on the MATNR (material number).
Please provide the sample code for select the following data. Thanks.
Classification table
OBJEK (from AUSP table)
MAFID (from AUSP table)
KLART (from AUSP table)
CLASS (from KLAH table)
ATWRT (from AUSP table)
MSEHI (from CABN table)
OBTAB (check if class type=002, set it as MARA)
STDCL (from KSSK table)

Hi,
if I understand, you´re trying to get information from the classification system for the material. You can use the following code:
DATA: clases LIKE TABLE OF sclass WITH HEADER LINE,
      datos LIKE TABLE OF clobjdat WITH HEADER LINE.
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
     EXPORTING
          class              = 'DESK'               "clase a buscar
          classtype          = '001'                "tipo de la clase
          features           = 'X'
          language           = sy-langu
          object             = 'PM00A000C055'       "Material
          objecttable        = 'MARA'
          key_date           = sy-datum
          initial_charact    = 'X'
          change_service_clf = 'X'
     TABLES
          t_class            = clases
          t_objectdata       = datos
     EXCEPTIONS
          no_classification = 1
          no_classtypes      = 2
          invalid_class_type = 3
          OTHERS             = 4.
loop at datos.
endloop.

Problem to upload the data into internal table record length more than 6000

Hi all
I stuck with this problem from past 3 days. I have to upload the data from excel sheet. iam making it tab delimited and trying to upload from gui_upload. but in the structure of file, we have, one field of 4000 characters, and other fields of 255 characters.
how can i upload this into internal table . From excel sheet or from tab delimeted or any other format? or any special function module is there? while iam doing this its truncating the datat 255 characters and not uploading the other fields also...
can any one of you help me out. ASAP
thnks in advance

from one of the forum iam just pasting code which it is used in lsmw, try the same logic in ur code hope it can work.
you have to create multiple lines with do...enddo loop., like this:
(assuming excel_long_text-text is 924 characters long, 7 lines X 132 char)
__GLOBAL_DATA__
data: offset type i,
text_132(132) type c.
__BEGIN_OF_RECORD__ Before Using Conversion Rules
Rule : Default Settings Modified
Code: /sapdmc/ltxtl = init_/sapdmc/ltxtl.
CLEAR offset.
DO 7 TIMES.
text_132 = excel_long_text-text+offset(132).
offset = offset + 132.
__END_OF_RECORD__ After Using Conversion Rules
Rule : Default Settings Modified
Code: transfer_record.
ENDDO.
also check this
COMMIT_TEXT
To load long text into SAP
READ_TEXT
To load long text into SAP

Issue with uploading XML file from application server into internal table

i Need to fetch the XML file from the application server and place into internal table and i am getting error message while using the functional module   SMUM_XML_PARSE and the error message is "line   1 col   1-unexpected symbol; expected '<', '</', entity reference, character data, CDATA section, processing instruction or comment" and could you please let me know how to resolve this issue?
    TYPES: BEGIN OF T_XML,
             raw(2000) TYPE C,
           END OF T_XML.
DATA:GW_XML_TAB TYPE T_XML.
DATA: GI_XML_TAB TYPE TABLE OF T_XML INITIAL SIZE 0.
DATA:GI_STR TYPE STRING.
data: GV_XML_STRING TYPE XSTRING.
DATA: GI_XML_DATA TYPE TABLE OF SMUM_XMLTB INITIAL SIZE 0.
data:GI_RETURN TYPE STANDARD TABLE OF BAPIRET2.
    OPEN DATASET LV_FILE1 FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF SY-SUBRC NE 0.
      MESSAGE 'File does not exist' TYPE 'E'.
    ELSE.
      DO.
* Transfer the contents from the file to the work area of the internal table
        READ DATASET LV_FILE1 INTO GW_XML_TAB.
        IF SY-SUBRC EQ 0.
          CONDENSE GW_XML_TAB.
*       Append the contents of the work area to the internal table
          APPEND GW_XML_TAB TO GI_XML_TAB.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
    ENDIF.
* Close the file after reading the data
    CLOSE DATASET LV_FILE1.
    IF NOT GI_XML_TAB IS INITIAL.
      CONCATENATE LINES OF GI_XML_TAB INTO GI_STR SEPARATED BY SPACE.
    ENDIF.
* The function module is used to convert string to xstring
    CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
      EXPORTING
        TEXT   = GI_STR
      IMPORTING
        BUFFER = GV_XML_STRING
      EXCEPTIONS
        FAILED = 1
        OTHERS = 2.
    IF SY-SUBRC <> 0.
      MESSAGE 'Error in the XML file' TYPE 'E'.
    ENDIF.
ENDIF.
IF GV_SUBRC = 0.
* Convert XML to internal table
    CALL FUNCTION 'SMUM_XML_PARSE'
      EXPORTING
        XML_INPUT = GV_XML_STRING
      TABLES
        XML_TABLE = GI_XML_DATA
        RETURN    = GI_RETURN.
ENDIF.
READ TABLE GI_RETURN TRANSPORTING NO FIELDS WITH KEY TYPE = 'E'.
IF SY-SUBRC EQ 0.
    MESSAGE 'Error converting the input XML file' TYPE 'E'.
ELSE.
    DELETE GI_XML_DATA WHERE TYPE <> 'V'.
    REFRESH GI_RETURN.
ENDIF.

Could you please tel me why the first 8 lines were removed, till <Soap:Body and also added the line <?xml version="1.0" encoding="UTF-8"?> in the beggining .
Becuase there will be lot of XML files will be coming from the Vendor daily and that should be uploaded in the application server and should update in the SAP tables based on the data in the XML file.
what information i need to give to vendor that do not add the first 8 lines in the XML file and add the line in the beggining <?xml version="1.0" encoding="UTF-8"?>   ??????
Is there any other way we can do with out removing the lines?

Error while reading excel file from application server into internal table.

Hi experts,
My requirement is to read an excel file from application server into internal table.
Hence I have created an excel file fm_test_excel.xls in desktop and uploaded to app server using CG3Z tcode (as BIN file type).
Now in my program I have used :
OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
DO.
READ DATASET v_filename INTO wa_tab.
The statement OPEN DATASET works fine but I get a dump (conversion code page error) at READ DATASET statement.
Error details:
A character set conversion is not possible.
At the conversion of a text from codepage '4110' to codepage '4103':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'Y_READ_FILE' had to be terminated as the conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 445. If this number is 0, the second error case, as
mentioned above, has occurred.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
Characters are always displayed in only a certain codepage. Many
codepages only define a limited set of characters. If a text from a
codepage should be converted into another codepage, and if this text
contains characters that are not defined in one of the two codepages, a
conversion error occurs.
Moreover, a conversion error can occur if one of the needed codepages
'4110' or '4103' is not known to the system.
If the conversion error occurred at read or write of screen, the file
name was '/usr/sap/read_files/fm_test_excel.xls'. (further information about
the file: "X 549 16896rw-rw----201105170908082011051707480320110517074803")
Also let me know whether this is the proper way of reading excel file from app server, if not please suggest an alternative .
Regards,
Karthik

Hi,
Try to use OPEN DATASET v_filename FOR INPUT IN BINARY mode encoding default. instead of OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
As I think you are uploading the file in BIN format to Application server and trying to open text file.
Regards,
Umang Mehta

Select into internal table

Similar Messages

Maybe you are looking for