Select multiple values in report level filters

Hi All,
I have report level filters in my webi report and i would like to seect multiple values from each filters?
is there any work around for this? your help is highly appreciated.
Thanks,
Ann

Edit your Report in WebI. From the left side select the last Input Control Tab.
Click on New. Click on the field for which you need this Filter and select Next.
You will see Input Controls avaialble foir Single Values. Scroll Down. There you will see the Checkbox, List Box etc available for Multiple values. Click on one of them and click Next and Finish.

Similar Messages

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

Selecting multiple values in a prompt for a BI Publisher report

Hi,
I selected multiple values in a prompt for a BI Publisher report and ran the report. The report run fine with single value. But it run to error with mutiliple value. The Oracle Business Intelligence Publisher version is release 11g (11.1.1).
Thanks in advance
Susan

Thanks for your replies !
Is there any other way to achieve this ?
There is 1 InfoObject which has 2 fields Employee and Department.
Employee     Department
001                A
001                B
001                C
In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
Can this be done in the backend through a ABAP code?

How can i select multiple values form select list

Hi ,
I have created few items in a page and all items are Lov items and based on these items stacked charts will display. My requirement is I need to select multiple values form LOV's
Eg: In Interactive report goto filter and select an item and expression as IN and select multiple items and i need to select multiple values like this.
Please anybody help me how to get multiple values.
I have one more doubt Can we have a Print preview option in APEX.
I have to see print preview for stacked charts. is it possible?
Regards
Narender B

HI ,
Thank you for valuable information and looks good.but Here our client need to select multiple values.... for eg: Open IR report and click on Actions button --->select filter
select any column , operator as IN and from expression select multiple items.
I need to select multiple values in that way so, could you please guide me how can i achieve this.
Regards
Narender B

Passing multiple values to report

Hi,
I have a parameter form. One of the field will have at least one value. When it have more than one value, the values will be separate by a comma and pass to the report. Please tell me how separate them and put them in quotation in the report query.
EX: the values are: PO, DR
There will be in the where condition as: where code in ('PO', 'DR');
Thank you in advance.
ps. I am using 10g
Edited by: 945599 on Jul 10, 2012 2:04 PM

Hello,
Forms does not allow user to select multiple values from a list item!
The purpose of the LIST ITEM is to provide a list of values for data entry. Since data entry is for a single row of data, the LIST ITEM allows a single value to be selected. Selecting multiple values in the LIST ITEM for a single value item on a single record is not the function of a LIST ITEM.
So, if you need to select multiple values from a field and pass them through a single parameter to report, i will present you two methods to achieve this!
First Method is the text item Method:
Stept 1:
Create the text item with the values you need to send to reports.
Step 2:
Create 2 visual attributes.One visual attribute is for selected values and the other one is for deselected values
Step 3:
Create a parameter, in forms parameter layouts which will hold the selected value.This parameter will be used to set the report query clause.
Step 4:
Create a trriger for the item which you created at step 1. An example is when-mouse-click trriger.In the body of the trriger,if the item instance is clicked you will modify its visual attribute and the parameter created at step 3 will receive the item instance value.
Step 5:
In reports create a user lexical parameter(which is a large text parameter ex 2000).Ex. P_Clause.The value of this parameter is the value recrived for the form parameter you created at step 3. You report query will be like this: select * from table where &P_Clause!
Second Method is the checkbox Method:
Stept 1:
Create a checkbox item near the text item with the values you need to send to reports.
Step 2:
Create a parameter, in forms parameter layouts which will hold the selected value.This parameter will be used to set the report query clause.
Step 3:
Before you call run_report_object proc, you will need to loop through records and build you parameter with the selected checkbox instances!
Step 4:
In reports create a user lexical parameter(which is a large text parameter ex 2000).Ex. P_Clause.The value of this parameter is the value recrived for the form parameter you created at step 3. You report query will be like this: select * from table where &P_Clause!
Hope this helps.
Regards,
Alex

Selecting multiple values from a search help

Hi Experts
Anyone knows if it is possible to select multiple values from a search help?
Thanks
Gaurav

Hi,
You cannot select mutiple values from search help as it is linked to inputfield and hence it will accept single value only. But at the same time, you may able to pass row of values to different inputfields.
Refer http://help.sap.com/saphelp_dm40/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm
Thanks,
Chandra

How to select multiple values from a listbox

Hi,
I have a list box on my UI which is not allowing me to select multiple values
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
I am working on Jdev 11.1.1.3 and I am using ADF/BC components
How to select multiple values from a listbox ?
Thanks,

Hi,
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
And what is the error ?
Frank

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

Select multiple value in a where clause

hello,
im using developer 2000.
suppose I have several values in a data grid. I want to use all of them in a where clause using IN operator or something. anybody knows how to do that. what I do is always insert all values in the grid into a temporary table and use that table in the where clause. is there any other easy, effective way of doing that?
select *
from table1
where category in (-- I want to select multiple values form a data grid here--)
thanks in advance.
bonny.

Hello Bonny,
You might consider the use of PL/SQL Collection Types
The first step in the process is to create a type and a table of that type.
CREATE OR REPLACE TYPE DateType IS OBJECT ( Arg1 DATE );
CREATE OR REPLACE TYPE TableList IS TABLE OF DateType;
DECLARE
list1 tablelist;
BEGIN
SELECT datetype (arg1)
BULK COLLECT INTO list1
FROM table1;
FOR c1 IN (SELECT arg1
FROM TABLE (CAST (list1 AS tablelist)))
LOOP
---- Your code -----;
END LOOP;
END;
For further insight please refer: http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/05_colls.htm
Regards.

After selecting multiple values, immediately it will placed in Table contro

hello experts,
I m using select-option for multiple value selection.
I want:-after selecting multiple values, immediately it will placed in
Table control columns which is on same screen of select-option and that columns are grayed out.
I'm using this table control for input purpose.
I tried multiple value selection for input in table control but it is not possible.
Please Help.

There should be some user action to trigger the filling in of the table control with values from the select options.
Typically it is a click of Enter from the User s side. This would automatically trigger the PAI of the Module Pool program. So i feel the FM that is mentioned in the above post is not required to read the values because in the PAI , the value from the Select Options would have already flown from the Screen to the Program.
It is important that you use Subscreen for Select options and write your code in the PAI between loop endloop.
LOOP at Itab.
MODULE fill_itab.
Endloop.
I hope everyone agrees with me on this .
Regards,
Arun

Select Multiple Values in Form 6i

I'm developing an application for internal audit division
there is a field called "root cause" i created a button ,,once open it shows all fields inside a seperate table called roots
I want the user to be able to choose multiple values and once he commit ,,all values he chooses inserted in the main table..
Is LOV feature can do it???

hello,
Please read this trend.
Select multiple values from an LOV
charles.

Select multiple values from the parameters in BI Publisher report Error

In the database, I wrote a function to retrieve data to report:
FUNCTION FN_TL002(cBDSID nvarchar2)
RETURN SYS_REFCURSOR as
TYPE t_cursor is REF CURSOR;
v_cursor t_cursor;
begin
OPEN v_cursor FOR
select Brach, txmonth, txdate, total from tl001
where brach in (cBDSID)
order by brach;
RETURN v_cursor;
end fn_tl002;
In Bi Publisher:
- I have a type parameter Option select multiple ( pBranch), LOV get data from database.
* In Data model : TL001 name
+ SQL query : select FN_TL002(:pBranch) from dual
if select a value not error, and then select two values of an error: ORA-06553: PLS-306: wrong number or types of arguments in call to 'FN_TL002'
please help me!
Thanks all!

See my response in the thread Re: Multi selecting drop down in BI publisher 11g report
The LOV is a Java array and your function needs to accept that array. To do this the data data type has to be a VARRAY Type.

Selecting Multiples Values from Multiselect Box

Hi
Here is my requirement ,
Multiselect List Box should display Simulator_Type Values
Simulator_Type Values           Values to search for in the column simulator type
AC - small signal                              AC
HB - Carrier                                    HB
SP - Linear Noise                            SP - L
SP - s parameters                           SP - s
TR - Transient                               TR
DC - operational point                     DC
ET - Envelope Transient                  ET
SSNA                                           SSNA
[nothing]                                      nilDepending on the values selected in the multiselect values the data has to be dipayed where the value is in the simulator type column
For Eg : AC - small signal is selected in the :p1_simulator_type multiselect box, The data where the word AC is in simulator_type column should display
Examples of data in the simulator_Type column:
SIMULATOR_TYPE
ac, dcOp, Periodic Steady-pss
AC - small signal
AC Small Signal, Operating Point, Periodic Steady
AC - small signal, SSNA
DC - operational point
ET - Envelope Transient
So , here if i select AC - small signal from the multiselect list box , then the data where "AC" is there in simulator_type has to be displayed , in this case the data associated with
ac, dcOp, Periodic Steady-pss
AC - small signal
AC Small Signal, Operating Point, Periodic Steady
AC - small signal, SSNA
has to be displayed...
currently i have the report query below which is working but only when one simulator type is selected ....
select
* from   DW_RFA_JOBDATA
where RFA_SUBMIT_TIME >= :P1_START_DATE
and RFA_SUBMIT_TIME < :P1_END_DATE
AND RFA_SIMULATOR_TYPE like '%'||:P1_SIMULATOR_TYPE||'%'Could any body please let me know how do i get data when multiple values are selected...
Please let me know any further explanation is needed for the question
Thank you
Edited by: priyapinky on May 5, 2010 9:26 PM
Edited by: priyapinky on May 5, 2010 9:54 PM
Edited by: priyapinky on May 6, 2010 8:48 AM

Hello,
It seems to me like you don’t really understand how multi select items work in APEX. This type of items (we are talking about multi-select list, checkbox and the shuttle item) don’t really returned multiple values. They returned a single value that contains multiple segments, each include one valid option. By default, each segment is delimited with a colon (:). In your case it means that if you chose two values from your static LOV, the returned value will look similar to “HB:DC” (or any other combination of options). Now you need to work with this value.
The way your RFA_SIMULATOR_TYPE column build, you can’t really work with the multi-select value, as you’ll never find a match to it, as this is actually an artificial value that only exist as a result of your multi-select.
Regarding the new query you are trying, you wrote yourself that “i am getting the data with all the simulator_type select”, and that is correct. Where in this query you are using your filter (:P1_SIMULATOR_TYPE)? This is not the way to go.
You need to break the compound value returned by your multi-select items, and work individually with each segment. You can do that in two ways. The simple one, as I already suggested, is to add another column that will contain only the code describing the simulator (similar to the returned value of the static LOV). In this case, using the instr() function you are checking if the column value is included in your filter (it’s a revered angle – you are actually checking if the single column value is included in your filter and not if the filter included in your column).
The second option is a bit more complicated and it involves slicing the filter itself and dynamically build your query, using the “SQL Query (PL/SQL function body returning SQL query)” report option. In this case we are going to use the APEX built-in function APEX_UTIL.STRING_TO_TABLE(). The following is a very simple code example that you’ll need to adapt to your scenario:
declare
q      varchar2(4000);
filter APEX_APPLICATION_GLOBAL.VC_ARR2;
begin
q := 'select * from emp where ';
filter := apex_util.string_to_table('10:20');
for i in 1..filter.count loop
    if i = 1 then
      q := q || 'deptno = ' || filter(i);
    else
      q := q || 'or deptno = ' || filter(i);
    end if;
end loop;
return q;
end;In your case the parameter for the string_to_table is your filter item, and you can use LIKE as your comparison operator.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Forthcoming book about APEX: Oracle Application Express 3.2 – The Essentials and More

Check boxes to select multiple documents on report list in 4,6C......

Hello,
I am working on 46C. When I execute FB03 List option, I get list of Document numbers. I am in the process of developing a custom report, so when I do that, along with the document numbers, I also get small checkbox besides it, so that I can select multiple documents.
I then I have a button on application toolbar when pressed should execute cetain logic.
Regards,
Jainam.

Hi,
Try this way.
REPORT ztest_notepad.
TYPE-POOLS:icon.
DATA: BEGIN OF it_mara OCCURS 0,
       check TYPE char4,
       matnr TYPE mara-matnr,
       ersda TYPE mara-ersda,
     END OF it_mara.
DATA:str TYPE string.
START-OF-SELECTION.
SELECT * FROM mara INTO CORRESPONDING FIELDS OF TABLE it_mara UP TO 100 ROWS.
LOOP AT it_mara.
   it_mara-check = '@T9@'. "code for empty checkbox
   WRITE:/ it_mara-check HOTSPOT ON,
           it_mara-matnr,
           it_mara-ersda.
   HIDE:it_mara-check,
        it_mara-matnr,
        it_mara-ersda.
ENDLOOP.
AT LINE-SELECTION.
it_mara-check = '@R7@'."Code for checked checkbox.
MODIFY LINE sy-lilli FIELD VALUE it_mara-check.
READ TABLE it_mara INDEX sy-lilli.
IF sy-subrc EQ 0.
   str = sy-lilli.
   CONCATENATE 'Row no' str 'selected' INTO str SEPARATED BY space.
   MESSAGE str TYPE 'I'.
ENDIF.
Thanks
Venkat.O

Problem with constant selection of keyfigure ar reporting level

I have created a multiprovider on top of a DSO and a Cube ,there is one characteristic which is not common in the DSO and Cube ,while i make constant selection on a partcular key figure at reporting level, that uncommon characterisitic data is displayed as not assigned.
Please help me in this regard.
Thanks in advance
Vikas Arya

Hi,Vikas Araya,
Try to use filter on that characteristic which is not common in the DSO and Cube.
because constant selection on key fig allows u r key fig value to become independent of all filter values.
Hope it may help u....
regards
kalyan

Select multiple values in report level filters

Similar Messages

Maybe you are looking for