Select-option field in dialog programming

hi guys,
i need to declare field matnr as select-option range in dialog programming..how can i code it in the module program?

This questions has been answered many times (even in february)
- search sdn wiki (2 commented samples at [SELECT-OPTIONS on Dialog programming screen|http://wiki.sdn.sap.com/wiki/display/ABAP/SELECT-OPTIONSonDialogprogrammingscreen] and [Select-Options in Module Pool Programming|http://wiki.sdn.sap.com/wiki/display/ABAP/Select-OptionsinModulePoolProgramming])
- search abap online help ([SELECTION-SCREEN - AS SUBSCREEN |http://help.sap.com/abapdocu_70/en/ABAPSELECTION-SCREEN_SUBSCREEN.htm] with sample at [Selection Screens as Subscreens |http://help.sap.com/abapdocu_70/en/ABENSEL_SCREEN_SUBSCREEN_ABEXA.htm])
Regards,
Raymond

Similar Messages

Dialog programming - How to place a select-option field in a dialog screen

Hi all,
In Dialog Programming, How to place a select-option field in a dialog screen.
Kindly give me some example code...
Thanks,
Jaffer Ali.S

hi Ali,
U can add select-options in ur module pool by using SELECTION-SCREEN BEGIN OF SCREEN <scrn> AS SUBSCREEN command.
check this link for reference.....
http://help.sap.com/saphelp_47x200/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/frameset.htm
Example Code :
DATA : ok_code TYPE sy-ucomm.
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X',
 p_rad2 RADIOBUTTON GROUP grp1,
 p_rad3 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_matnr FOR mara-matnr,
 s_matkl FOR mara-matkl,
 s_mtart FOR mara-mtart.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 1010.
START-OF-SELECTION.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
CALL SCREEN 1010 .
ENDMODULE. "status_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE user_command_0100 INPUT.
CASE ok_code.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
SCREEN 100 ****************
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN sub_1010 INCLUDING sy-repid '1010'.
***** where sub_1010 is name of sub-screen area
PROCESS AFTER INPUT.
CALL SUBSCREEN sub_1010.
MODULE user_command_0100.
<<< REMOVED BY MODERATOR >>>
Harimanjesh AN
Edited by: Marcelo Ramos on Dec 17, 2008 7:54 PM

Freely Programed Help for select-option field

Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM

>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ?

How can we pass the select-option value to modulepool program?

hi,
how can we pass the select-option value to modulepool program ?
Because if i declared select-options in executable program and i used SSCRFIELDS to define push buttons in selection screen.
           My requirement if enter the values to select-options and press UPDATE pussbotton then i want call screen which contains tablecontrol.
           How i get select-option values to PAI of call screen for getting the data from database table to my internal table?

Oh I thought that you have selection-screen and again you are working on dialog programming.
if you want to use select-option directly in module pool then it is not possible.
but you can do other way.
create two varaiables
data : v_kun_low like kna1-kunnr,
         v_kun_high like kna1-kunnr.
use these two variables in layout ,let user knows that he can not give options like gt,lt,eq ,it will be always BT.
and also when you see normal report program,you can use multiple values in either low or high,but here it is not possibel.
use can enter only low value and high value.
when you come to program point of view
declare one range
ranges r_kunnr for kna1-kunnr.
do the coding like
r_kunnr-low = v_kun_low.
r_kunnr-high = v_kun_high.
r_kunnr-options = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
now you can use r_kunnr in select query ,it will work like select-option.
other than this there is no option.
Thanks
Seshu

Select-options in module pool programming

hi,
I need to have four fields as part of my layout that are select-options fields with multiple values entry options. Since layout doesnt have 'select-options" functionality, i defined it from the module pool program, ie: I wrote a selection screen in the PBO module. The problem is if i make any changes to the code, the layout changes back to the previuos format.
Is there any way in which i can combine selection-screen logic with my layout.
Thanks,
Sruthy

HI
GOOD
Selection Screen Version
Only for Executable Programs
If you do not specify a selection screen version, the system automatically creates a selection screen based on the selection criteria of the logical database and the parameters and select-options statements in the program.
If you want to use a different selection screen of the logical database, enter a number in this field. The number must be smaller than 1000 and correspond to an additional selection screen of the logical database. The possible values help displays a list of available selection screens. You can also look in the selection include of the logical database (program DBxxxSEL, where xxx is the name of the logical database).
Tomislav
1. In the top include define the selection screen with
selection-screen begin of screen 9250 as subscreen.
SELECT-OPTIONS analyt FOR ztv_cc02-zd_mumla .
selection-screen end of screen 9250.
2. Using the screen painter create a subscreen area in
the main screen where you want to have this.
3. Then, in the screen flow logic code as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_1000. etc
call subscreen SUB1 including 'PROGRAM NAME' '9250'.
PROCESS AFTER INPUT.
module exit at exit-command. etc.
call subscreen SUB1.
THANKS
MRUTYUN

How to create select-options in module pool program

Hi
i am structed at this point could you please tell me
how to create select-options in module pool program

Steps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O

Default Current year in select option field on selection Screen

Dear Experts,
I want to set current year as default value in fiscal year select-options field on selection screen.
for this, i hv written following code
DATA:VAR_DATE TYPE SY-DATUM.
DATA VAR(4) TYPE C.
VAR_DATE = SY-DATUM.
VAR = VAR_DATE+0(4).
this retrieves current year .
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT VAR TO VAR..                            "Fiscal Year
SELECTION-SCREEN END OF BLOCK B1.
Now when i am executing program pop-up is raised describing "Specify the range Limits". Please help.
Regards,
Apoorv Sharma

>
Ganga Bhavani R wrote:
> Use below lines.
>
> SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
> SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT SY-DATUM+0(4). "Fiscal Year
> SELECTION-SCREEN END OF BLOCK B1.
Hi, Ganga,
I think it will not working properly that way, Please test the bellow Sample Code.
TABLES: anlc.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS i11 FOR anlc-gjahr .
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
IF i11[] IS INITIAL.
    i11-low = sy-datum+0(4).
    APPEND i11.
ENDIF.
Thanks and Regards,
Faisal

Add selection screen field in standard program

Hi Friends,
I have a requirement to add a language selection screen field in standard programs (RFSUSA00, RFITEMGL, RFIDPL11, RFBELJ10_NACC, RFIDPL06, RAGITT_ALV01 , RFASLD15 , S_PL0_86000028 , RFCASH00 , RFIDPL18).
This is such that when I select the appropriate language the output should get printed in that paticular language. Can someone help me with how to do this?
Regards,
Dikshitha

Hi Dixitha,
Use implicit enhancement option.
Desplay the report in se38.
In Menu, go to Edit > Enhancement Operations > Show Implicit Enhancement Options.
The system will show you lines (in color) where you can add your enhancement.
This function will allow you to add business rules, substitute fields, do extra calculations, and other unique, non-standard requirements.
Reddy

How to provide select-option in module pool programming

Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheer

Hi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish

Any limitations on select-option field size

I am trying to define a select options (NO INTERVALS) for a field which is 80 characters in length.
Program cuts it off to 45 characters in execution mode.
Could you please let me know if there is any other way to achieve this.
Regards
Kasi

Hi Kasi,
It looks like you've hit a hard limit of the system, the generated selection screen has the selection option field defined as 45 chars, even though the field defined in the program is longer.
I think the only way around this is to create your own selection screen and assign this to your report.
Regards,
Nick

Select-option field on module pool screen

hi all,
Can anyone pls let me know, how to design and use a field like a select-option field on a Module-pool screen i.e. how can i get that multiple selections tab after the high field of the select-options.
thanks in advance,
vinny

All you need to do is define your selection screen and then embed it in a subscreen area of your dynpro(screen). Here is a sample program.
report zrich_0006 .
tables: mara.
* Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
 p_rad2 radiobutton group grp1,
 p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
 s_matkl for mara-matkl,
 s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*& Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
* Screen screen 100 with a subscreen area called "subscreen_1010"
* Screen Flow Logic follows
*process before output.
* module status_0100.
* call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
* call subscreen subscreen_1010 .
* module user_command_0100.
Regards,
Rich Heilman

Call Transaction and fill a select-options field with more than one value?

Hello everybody,
how can I fill a select-options field with more than one value.
Here is the code example:
CLEAR: GT_BDCDATA, GS_BDCDATA.
GS_BDCDATA-program = 'RHALEINI'.
GS_BDCDATA-DYNPRO = '1000'.
GS_BDCDATA-DYNBEGIN = 'X'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
GS_BDCDATA-FNAM = 'PCHOTYPE'.
GS_BDCDATA-FVAL = 'P'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
LOOP AT gt_hrobjinfty INTO gs_hrobjinfty.
    GS_BDCDATA-FNAM = 'PCHOBJID-LOW'.
    GS_BDCDATA-FVAL = gs_hrobjinfty-objid.
    APPEND GS_BDCDATA TO GT_BDCDATA.
    CLEAR: GS_BDCDATA.
ENDLOOP.
CALL TRANSACTION 'PFAL' USING GT_BDCDATA MODE 'A'
                   MESSAGES INTO GT_MESSAGES.
THX.

Hi,
Please refer the code below:
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
* load each personnel number accessed from the structure into
* parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
Thanks,
Sriram Ponna.

Re : select-options in abap-objects program

Dear friends,
                  I want to give select-options in abap-objects program. How to give that.
                             Thanking You
with regards,
Mani

In the transaction SE24, enter your class name, click modify.
in the tab named "Types" you have to declare two types. By example, if you want to receive one select-options that in your program that uses this class is declared like:
" P_SAKNR FOR SKAT-SAKNR".
you've got to declare two types in the class:
a- TYPES: begin of E_S_SAKNR,
                      sign(1),
                      option(2),
                      low(10),
                      high(10),
                  end of E_S_SAKNR.
b - TYPES E_T_SAKNR type standard table of E_S_SAKNR.
so, in the class method that you want to receive P_SAKNR as importing parameter. You got to do this:
method TEST importing ET_SAKNR type E_T_SAKNR.
now, in the implementation of this method you should be able to use ET_SAKNR as the same way as you usually use a parameter or a select-option. You could use it in a select with the operator IN by example..

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

How to use a parameter of a report program from selection screen in a dialog program

how to use a parameter value(entered ) of a report program from a selection screen in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog program

Hi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro

Select-option field in dialog programming

Similar Messages

Maybe you are looking for