SELECT-OPTIONS in table maintenance generator screen

Hi
Is it possible to create SELECT-OPTIONS in table maintenance screen?
My requirement is to allow the user to enter single Company code and Range of G/L Accounts in the Table Maintenance input screen. Please let me know.
Thanks
Abdul Hakim

Hello Tamas,
As a matter of fact we can add a custom selection-screen to the TMG screen & without manually modifying the TMG
You can do so by using the [Event AA: Instead of the Standard Data Read Routine|http://help.sap.com/saphelp_nw04s/helpdata/en/91/ca9f56a9d111d1a5690000e82deaaa/content.htm].
Please check the code snippet:
DATA: gv_fldate TYPE s_date.
* User-defined selection-screen
SELECTION-SCREEN: BEGIN OF SCREEN 9000.
PARAMETERS:     p_carrid TYPE s_carr_id OBLIGATORY.
SELECT-OPTIONS: s_fldate FOR gv_fldate OBLIGATORY.
SELECTION-SCREEN: END OF SCREEN 9000.
*&      Form sub_yvsflight_event_aa
*       text
FORM sub_yvsflight_event_aa.
DATA: ls_temp_data TYPE yvsflight,
        lt_temp_data TYPE STANDARD TABLE OF yvsflight.
* Call the user-defined selection-screen
CALL SELECTION-SCREEN 9000 STARTING AT 25 10.
* Populate the int. table TOTAL
PERFORM get_data_yvsflight.
* Delete the records which are not required
LOOP AT total.
    ls_temp_data = <vim_total_struc>. "Copy to local struct.
    IF ls_temp_data-carrid NE p_carrid OR
       ls_temp_data-fldate NOT IN s_fldate.
      DELETE total. "Remove the record from the TOTAL
    ENDIF.
ENDLOOP.
ENDFORM.                    "sub_yvsflight_event_aa
BR,
Suhas

Similar Messages

Canceling previous table maintenance generator screen

Hi all,
When we create a screen via table maintanence generator to enter data into the table.
However I want to cancel this action, is it possible? That is, I have used table maintenance generator and completed the all process, however now I want to cancel it...
Thanks.

Hi,
There is a delete button in Table Maintenance Generator. Click it. Select all the Options and click Delete.
Awrd points if useful
bhupal

Increasing size of table maintenance generator screen

Hi
normally when we create table maintenance generator for a ztable the size of the maintenance screen will be standard
can any one tell how to increase the size of that screen.
vamsi

Hi
Check the links
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
/message/2831202#2831202 [original link is broken]
Reward points if useful
Regards
Anji

Fields update on Table maintenance generator screen

HI All..
I have a custom table with five fields. I did table maintenance generator on it. It has Screen 1 as overview screen and scree 2 as single screen.
Now of the five fields two fields are user name and date. When i enter data on the other three fields and save it on the second screen - iam able to update the two fields for username and date and display on the screen two itself.
But if iam not saving the data on the screen 2 and going back to screen 1 and then save it - iam not able to update the user name and date and also to display the username and date on the screen.
Any suggestions are helpful..
Thanks and will reward helpful answers.

In this case..
Iam having the functionality of SM30 through table maintenance generator.
On Screen 2- single screen - user name and date is working as i had written the logic in the relevant PBO and PAI module.
But if user is not saving the data in screen screen2 and coming back to screen 1- which is overview screen and then try to save it-- all other fields are getting saved except the username and date..
Thanks.

Add field in table maintenance generator screen of maintenance view

Hi,
I am having a table with field user-id. I want to generate a maintenance view which will have corresponding user name as input disabled field. Since there are two tables USR21 and ADRP I need to access(not a direct check table) I will have to modify the code generated by the table maintenance generator.
Problem is that it is having one internal table EXTRACT at table control loop. That internal table cannot be accessed if you write a module inside the table control loop and try to catch. The error coming as EXTRACT is not object of structure and therefore no component. I tried to capture the value of the Loop but could not be successful. Any suggestion please.
Thanks,
Atanu

Hi,
sample:
      MODULE LISTE_UPDATE_LISTE.
    ENDCHAIN.
*--->begin of your change
    CHAIN.
      FIELD YTAB1-BILKS .
      FIELD YTAB1-BILKH .
       module check_bewar ON CHAIN-input. "your checks
    ENDCHAIN.
*-----> end of your change
ENDLOOP.
MODULE LISTE_AFTER_LOOP.
-> module check_bewar is in an includ z123_INCL
Regards Andreas

Max nos of fields in table maintenance generator screen

Hello,
Is there any restriction on the number of colums(fields) to be displayed in the screen of table maintenance?
Actually, I am having a Ztable with some 100 fields and when I generate the table maintenance using Single Screen, it give me error for dynpro creation. But it works with 68 or less fields.
Can anyone help me out in this?
Thank You.
reg,
Pankaj

Hi,
you can change your table:
if your table is like glt0 or lfc1,
you can assign month to key of the table :
FIELD     KEYFLAG
MANDT     X
BUKRS     X
GSBER     X
GJAHR     X
WAERS     X
MONAT     X "<-
WRBTR
Andreas

Purpose of table maintenance generator

wht is the purpose of table maintenance generator

Hi Pavan,
The purpose of table maintainence generator is to enable the table maintenance through SM30, and to implement and validation etc on table field inputs.
SE11->Utillities->table maintainence generator
You need to enter the values of following fields:
1. Table name
2. Authorization group , and authorization object (select the suitable one )
3. Function group and package
4. Maintainence type : single or double screen maintainence view depending on the option selected.
5. Maintain screen number : you may specify a value or let the system generate one for you.
The validation code for the table entry is written in the flow logic of this screen. Even some of the fields may be made display only , by adding suitable code in the logic or directly disabling the input in table control in the layout.
Table maintanance is for creating,adding datas to an existing table.
it is for adding muiltiple records at a time in the table
A table can be manipulated by a program or manually.
When creating table, you will find a check box 'Table maintenance allowed'. If we
check that option, we can manually enter entries using SE16 or table
maintenance generator screen.
SE16 is for data browser.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table
maintenance generator.
In the table maintenance generator screen, we should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually we will create with one
step. we should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table
entries by choosing Maintain.
In the production system, end-users will not be having access to transaction
codes like SE11 and SE16. Developers will not be having access to many
transaction codes including the above two.
To view the contents of the database table, we will use SE16n in Production
system. Please find out the difference between SE16 and SE16n.
All these authorizations will be maintained by BASIS team, by creating access
profiles.
So in order to edit or create the contents of a database table, we should go for
table maintenance generator. In real time, authorizations will be maintained in
production system. (even in development and Test systems to some extent).
There is an audit like Sarbanes-Oxley Act for American clients, where every thing
will be audited by government agency. To know more about SOX, use the links on
the right hand side of this page.
The second reason is, we can edit or create multiple entries at a time, using table
maintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance
screen SM30. Please try to find out the use of those, by creating an example.
Table Maintenance generator: Difference between one step and two steps.
While creating table maintenance generator, we find below options:
When we choose one step, we have to give the screen number in Overview Screen field.
When we choose two step, we have to give both overview screen number and single screen number.
You can give any number for screen. Dont give 1000 screen number. As this
number is reserved for selection screen.
When we choose two step, two screens will be created for table maintenance. For
single step only one screen will be created.
When we choose two step, table maintenance will work as follows
Go to SM30, give the table name for which you have created table maintenance-
Overview screen will be displayed. To create entries, when you click on new
entries. Another screen will be displayed, where you give input and save. You can
enter one record at a time.
Go to SM30; give table name for which you have created table maintenance-
Overview screen will be displayed; To create entries click on new entries, you can
enter the records on the same screen. You can enter multiple records at a time.
We use single step generally, as it is user friendly.
To completely understand the difference and above points please do exercise by
creating table maintenance generator in both ways (using single step and two
step).
Link: [http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm]
Link: [http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm]
Link: [/message/2831202#2831202 [original link is broken];
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.

What is the purpose of TABLE MAINTENANCE GENERATOR IN ABAP DDIC

CAN ANY EXPLAIN ME
1.what is the purpose of TABLE MAINTENANCE GENERATOR IN ABAP DDIC?
2. AND THE CONTENTS IN ITS TABS.
KINDLY LET ME KNOW.IT IS URGENT
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 28, 2008 11:42 AM

Go to SE11, give the table name and click on change. Then Go to utilities--> Table maintenance generator.
In the table maintenance generator screen, we should give Authorization Group, Function Group name (Function Group name can be same as table name), Maintenance type can be one step or two step, usually we will create with one step. we should give maintenance screen number. After clicking on create button, a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table entries by choosing Maintain.
Why we have to go for Table maintenance generator, when we can edit the table by SE16 or SE11, utilities->create entries?
In the production system, end-users will not be having access to transaction codes like SE11 and SE16. Developers will not be having access to many transaction codes including the above two.
To view the contents of the database table, we will use SE16n in Production system. Please find out the difference between SE16 and SE16n.All these authorizations will be maintained by BASIS team, by creating access profiles.
So in order to edit or create the contents of a database table, we should go for table maintenance generator. In real time, authorizations will be maintained in production system. (even in development and Test systems to some extent).
There is an audit like Sarbanes-Oxley Act for American clients, where every thing will be audited by government agency. To know more about SOX, use the links on the right hand side of this page.
The second reason is, we can edit or create multiple entries at a time, using table maintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance screen SM30. Please try to find out the use of those, by creating an example.Table Maintenance generator: Difference between one step and two steps.
While creating table maintenance generator, we find below options:
1. When we choose one step, we have to give the screen number in Overview Screen field.
2. When we choose two step, we have to give both overview screen number and single screen number.
You can give any number for screen. Dont give 1000 screen number. As this number is reserved for selection screen.
When we choose two step, two screens will be created for table maintenance. For single step only one screen will be created.
When we choose two step, table maintenance will work as follows:
Go to SM30, give the table name for which you have created table maintenance-
Overview screen will be displayed. To create entries, when you click on new entries.
Another screen will be displayed, where you give input and save.
You can enter one record at a time.
We use single step generally, as it is user friendly.
To completely understand the difference and above points please do exercise by creating table maintenance generator in both ways (using single step and two step).
<REMOVED BY MODERATOR>
regards,
Balaji
Edited by: Alvaro Tejada Galindo on Feb 28, 2008 11:42 AM

Addition of a new column in Table Maintenance Generator

Hi All,
I have a requirement in which I have to include a new field in Table Maintenance Generator . This field is not present in the table but its data will be fetched from another table . Pls help me in this regard.
I have little idea of Table control .
Regards,
Nibha

Hi Nibha,
Table maintenance generator screen is an automatically generated screen. You cannot to any changes in that and neither can you do the changes in the PBO and/or PAI.
You can do it but it will ask you for SAP key etc. So there's not need to do it that way.
What you could do is;
1. Go to the table maintenence generator from SE11, in Change Mode.
2. Click on change icon. The system will show the 'Change Generation Elements' screen where it sill ask you the resson
    for change.
3. Click on the New Field/Sec. table in struction (or whichever is appropriate/applicable in your case)
4. Press Ok (Tick sign).
5. Then it will show you the ''Change Generation Elements: Detail' screen.Here;
       => You will select the maintenance screen that you wish to change( Overview/Single).
       =>   And the Field Type. Whether it is a key field or normal field.
              Select which ever is applicable.
6. The system will then re-generate the screen for you and - You'll Smile! - that you got the answer!
Cheers!
Sanjiv

Table maintenance generator for a custom table

Hi All,
I have a requirement.
I had created a custom table with 5 fields with partner_id as the key field.
I had generated the table maintenance for this.
But, when i maintain via sm30, the maintenance screen should display 7 fields, i.e
for the partnerid, the firstname and the lastname has to be display as the second and third column.
So, in the maintnenace screen sm30, i should have 7 fields display... but actually in real custom table, there will be only five fields (except firstname and lastname of partner).
Please guide me how to do this development.
Do i need to change the code generated via table maintenance and add these two fields in the table control and code to retreive the values for the firstname and lastname.
Please help me.
Thanks,
Jaffer ali.S

it is not a wise idea to add your custom fields in standard sap table maintenance generator screens..
each time you do a re - generate, (in case you added a new field in the table, or changed a data element, ) you will have to regenerate your tabe maintenance generator, and you will lose your code...
in this case, it will be better to create a custom screen with these fields and write code to populate the table..
or to make it easy, create a maintenance view with all fields required,

Problem with table maintenance generator overview screen

I added a field in a custom table and then used table maintenance generator to regenerate the table maintenance screen.
I used 2 step to generate. The problem that I have is the field not displayed in the overview screen though it is visible in the single screen ( ie the second screen).
I am not sure where the problem is as the field is not visible at all in the table control of overview screen.
Please help me on this as to what could be the problem.

Usually it is enough to regenerate both screens and the modules, but sometimes it doesn't pick up all the changes. In that case just delete the maintenance dialog and recreate it. That should do it.
Regards,
Michael

Table Maintenance Generator giving Error in PRD.

Hello Experts,
I am receiving below error in PRD for a Table Maintenance generator for Z-Table. PFA Screen Shot.
My Query is that though the information icon narrates to goto T-code SE54 & Re-generate TMG for the specified Function group. Which Option should 1 select after i had selection the option for Edit Function group->Re-generate group specific program.
The info icon in the first pic says to do the following.
Choose 'Edit Function Group' in the transaction SE54, enter the function group name 'ZOTMTRDPROFITSEG' and choose 'Regenerate Group-Specific Programs'. Choose 'Refresh Structure-Spec. Data Declarations' in the next selection window.
Would like to add a point that this Function grp also contains TMG for other tables as well, will it impact other TMG's.
Best Regards
Priyesh Shah

regenerate the TM object via SE11 - Table maintenance.
normally should do the trick.
However, keep the func groups & tables 1:1 saves a lot of this kind of problem.
Don't mix them up i.e. more than 1 tab maint for a func group - never ending hassle you will get!!!
go into Expert mode and regen it again. Remove the maint from this func group and create new func group for the table.

EVENTS in table maintenance Generator

Hi, can u people help me while using EVENTS in Table Maintenance Generator. Means how can I perform different task using events.

Hi,
Using events in table maintenace generator, you can validate the fields, update the fields etc..There are events(01-New Entry), (02-Before Save); (03-After Save) etc... The respective events trigger on the action performed.
To create events : Goto table maintenace generator screen->Enviorement->Modifications->Events.
Select the from the list of events and peform based on ur requirement
Regards
Shiva

How to create table maintenance generator?

Dear Sir/Madam,
when i am creating table maintenance generator , it asks for function group
i give 0MB8 , it says u r going to change function group which does not belongs to u,
then i created a function group yfg9 and given , it then says yfg9 cannot be processed.
please telll me how to create the table maintenance generator for maintenance view yv_mmim_rep_cust.
Thanks in advance,
Dastagiri

Hi ,
Table Maintenance generator is used to maintain data in table , instead of giving access to se11 , we create a tcode for this table maintenance generator and we will give this tcode to end-user to maintain data
To generate table Maintenance generator :
click on UTILITIES in menu bar
-> table maintenance generator
-> enter Authorization Group as : &NC&
-> Enter Function Group : name of your table ( so it will create a function group , to check this function group go to tcode se80 : then select function and enter your Table name )
-> Then click on find screen numbers in Application tool bar.
-> Then click on create button in Application tool bar
if it is created successfully , then you will get a status message like table maintained generator is created successfully.

Table maintenance generator is not saving entries.

Hi All,
I am facing problem in table maintenance generator.
I created a table maintenance for Z-Table.
In my table last 2 fields are a checkbox.
When we go to Sm30 and check/uncheck the boxes then save , message comes tht data saved , but when we come out and go back to maintenance generator , it's not saved.
while table maintenance in 2 step , then on detail screen it is working perfectly but on primary screen it's not.
when TM is single step , it's show entries saved but not saving in data.
I tried to delete and regenerate table maintenance but still not working .
Please guide me to ractify this.
Thanks in advance,
Ashish Gautam

Hello Friend,
Check with th etechnical settings of the ztable:
see if your buffereing is allowed, and log data chnages is checked.
If so :
Then select buffereing is not allowed and uncheck the Log Data Changes:
Also go to TMG:
Check if standard recording routine is selected, then select the no, or user recording routine.
After making these changes, delete the TMG and create a new one once again. You can check it will work fine now.
Thanks and regards,
Uttam Agrawal
[http://uttambpt.blogspot.com|http://uttambpt.blogspot.com]
Edited by: uttamagrawal on Jan 31, 2011 12:42 PM

SELECT-OPTIONS in table maintenance generator screen

Similar Messages

Maybe you are looking for