Select-options on selection-screen type char100 problem

Hi friends! I created on selection-screen a select-options:
SELECT-OPTIONS: zzcduc FOR equi-ZZCDUC.
The field equi-ZZCDUC is a CHAR100 field. The problem is when I run program, in this field user can't input more of 46 characters. This is a serial number with 100 characters, why I can input 100 characters?
Thanks for any help.

Hi, this is copied from SELECT-OPTION documentation:
The LOW and HIGH fields of a selection option are displayed in a length up to 18 bytes long (scrollable up to 45 bytes). If you define a length longer than 45, fields are truncated on the selection screen after the 45th character. This affects the first line of the SELECT-OPTIONS table. You can, however, use SUBMIT to pass longer selection options to a report if they are specified with the addition NO-DISPLAY and thus do not appear on the selection screen. Without NO-DISPLAY, the fields are then truncated whenever the selection screen is processed in the background ( SUBMIT without VIA SELECTION-SCREEN).
regards,

Similar Messages

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

Output from tables which I mention in select options of the screen as input

Dear All,
I want to fetch the data in the form of output from tables which I will mention in select options of the screen as input.
In selection screen option if I write any table name then how can i select this table in select query of ABAP program ?.
I may select any tables in select options of screen. But In select query I should get that table name automatically.. How ?
e.g. If i put table name as an input i.e. MARA in select option .
In program how to write select query to get records from that table ?
SELECT MTART MATKL from MARA
Every time I should not go to select query of program & replace the tablename.
How to solve this problem ?

Hi,
PARAMETERS p_table(30)." type string.
"This is a Tested code Just Execute and Check
START-OF-SELECTION.
DATA: lt_tmp TYPE REF TO data.
DATA : line TYPE REF TO data.
FIELD-SYMBOLS: <lt_tmp> TYPE STANDARD TABLE, <wa>, <dyn_field>.
CREATE DATA lt_tmp TYPE STANDARD TABLE OF (p_table).
ASSIGN lt_tmp->* TO <lt_tmp> .
CREATE DATA line LIKE LINE OF <lt_tmp>.
ASSIGN line->* TO <wa>.
SELECT * FROM (p_table) INTO TABLE <lt_tmp>.
IF sy-subrc = 0.
    LOOP AT <lt_tmp> ASSIGNING <wa>.
      DO.
        ASSIGN COMPONENT sy-index
           OF STRUCTURE <wa> TO <dyn_field>.
        IF sy-subrc NE 0.
          EXIT.
        ENDIF.
        IF sy-index = 1.
          WRITE:/ <dyn_field>.
        ELSE.
          WRITE: <dyn_field>.
        ENDIF.
      ENDDO.
    ENDLOOP.
ENDIF.
Cheerz
Ram

Length of select-options in selection screen.

Hi,
I was able to give the lemgth of select-options only upto 8 characters.
Select-options :S_Mtrial for mara-matnr.
But my requirement is I want total name which is more than 8 characters.
Select-options:Material_numberl for mara-matnr.
Can any one help how to do.
Thanks in advance.

The Statement...
Select-options :S_Mtrial for mara-matnr
The selection screen length depends on the type that you are assigning to it. Since the length of type
mara-matnr is less, the selection option S_Mtrial will be displayed with short length in the selection screen.
The alternate to do this is...
selection-screen begin of line.
selection-screen comment 2(10) text-001.
select-options : <ur select option name>
selection-screen end of line.
Text element,text-001 contains the select option text to be displayed in the screen
Hope it helps.

Multiple select-options in a screen But no screen space

Dear Experts,
I have mutiple select options in a screen, i am finding it a problem to display them all in one screen.
it should be done with out any vertical scroll nor horizontol scroll.
Awaiting to hear from you all.
Regards,
Karthik

Hi,
You can include more than one selct options or parameters in a single line..that might be favourable as u do not want to have scrolls..
the syntax goes like this
SELECTION-SCREEN BEGIN OF LINE.
<declare your parameters and select options>
SELECTION-SCREEN end OF LINE.
whatever u have written between begin of line and end of line will appear in a line..in this way you can reduce the page size..Hope the information was useful.
Regards
Vasavi
Edited by: Vasavi Kotha on Jan 6, 2009 5:29 PM

How to hide a select option on slelection screen??

Hi all,
I wanna hide a screen field (select option) on selection-screen. I looped the screen in AT SELECTION-SCREEN OUTPUT and found the name of screen to hide. But the <option_name>_low and <option_name>_high are always show here.
Who can give me a way to do that???
In fact, i wanna hide or display the select option after choosing a radiobutton.Who can give me a way??

Hi,
Check the below code.
tables: pa0000, pa0001.
parameters: p_rad1 radiobutton group rad1 default 'X' user-command rusr,
p_rad2 radiobutton group rad1,
p_rad3 radiobutton group rad1,
p_rad4 radiobutton group rad1,
p_rad5 radiobutton group rad1.
selection-screen: begin of block blk1 with frame.
select-options: s_pernr for pa0000-pernr modif id ABC,
s_stat2 for pa0000-stat2 modif id DEF,
s_werks for pa0001-werks modif id GHI,
s_persg for pa0001-persg modif id JKL,
s_persk for pa0001-persk modif id MNO.
selection-screen: end of block blk1.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'ABC'.
IF p_rad1 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'DEF'.
IF p_rad2 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'GHI'.
IF p_rad3 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'JKL'.
IF p_rad4 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'MNO'.
IF p_rad5 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
*Note
*Titles for Rado buttons and parameters.
*P_RAD1 Personal Number
*P_RAD2 Employment Status
*P_RAD3 Personnel Area
*P_RAD4 Employee Group
*P_RAD5 Employee Sub group
*S_PERNR Personal Number
*S_PERSG Employee Group
*S_PERSK Employee Sub group
*S_STAT2 Employment Status
*S_WERKS Personnel Area

Create a select option in a screen

Is it possible to create a select option in a screen?
I can easily create the 2 input boxes, but not with the little button on the right like when we create a select option in a report.
Is the any other simple way to create a select option without creating a report? (the reason is because I want to have everything in the same module pool)

Hi,
Please refer to SAP's documentation here: http://help.sap.com/saphelp_nw70/helpdata/en/e4/2adbec449911d1949c0000e8353423/frameset.htm.
Especially Part 'Subscreens and Tabstrips for Selection Screens', there go to 'Selection Screens as Subscreens'.
HTH, Gerd Rother

How to create the select option in the screen

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Try RANGES.
The RANGES has same structure as that of select-options.

Side by side select options in selection screen

Hai Gurus,
In a report, I need to place Period From and Period To date select-options in selection screen.
In one line (i.e side by side).
Appreciate your immediate response.
Thanks and Regards,
Kiran.

Thanks to all,
I got it.
my code here.
SELECTION-SCREEN: BEGIN OF BLOCK sel1 WITH FRAME TITLE text-sel.
PARAMETERS: SUMMARY AS CHECKBOX USER-COMMAND SUMMARY.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) text-pfr.
SELECT-OPTIONS: VALID_FR FOR ZZUTIL_RATE-VALID_FR MODIF ID RAM no intervals NO-EXTENSION. "changed
SELECTION-SCREEN COMMENT 30(13) text-pto.
SELECT-OPTIONS: VALID_TO FOR ZZUTIL_RATE-VALID_TO no intervals NO-EXTENSION. "changed
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK SEL1.

Select-options/range in screen

Hi all,
I just wanted to display select-options in the screen numbered 1000,
by putting which control can i do this ??........
regards
Jose

if u want to pass values in the selection screen use
Ex:
         selection-screen begin of block b1
           select-options : p_matnr for mara-matnr.
         selection-screen end of block b1.
else if u want to pass while execution of program
use Ranges
Ex: ranges: p_matnr for mara-matnr.
         Pass variables
         p_matnr-low, p_matnr-high....................
Regards,
Ajay

PS:Copy of MBBS report with Date(GR) selection option in selection screen.

Hi,
We are developing a report, which is Copy of MBBS report, addition as Date(GR) selection option in selection screen to view historical data {i.e.Project Stock(Q) on back dates}.
MBBS is showing Project Stock w.r.t. WBS. So pls suggest Table, which can fulfill the requirement to show the Project Stock from GR w.r.t. Purchase and Production order in back date w.r.t. that WBS.
Pls do the needful.
Thanks,
Amit Jain.

Hi Amit ,
The Project Stock Table is MSPR , and the Project stock history table is MSPRH .
Though not through with your actual requirement , There is a standard Report MB5B -- Stock on Posting Date . In the selection screen , we can have the Special Stock Q (Project Stock ) .
If you can develop copying this report instead of MBBS , it would take care of receipts as well as issues ,and from the material Document you can build a relation to the account assignment WBS/Network Activity through MSEG Table .
Hope it helps .
thanks and regards
Kish

Problem with table-indexes when using select-options in select

Hello experts,
is it right that table-indexes will not be used if you take select-options to select data from the database?
in detail:
i have build up an table-index for one of our db-tables and test it via an test-programm. The first test with '=' comparisons worked fine. Every key of the index was used; checked via ST05!
e.g.:    SELECT * FROM TABLEA INTO ITAB WHERE keya = '1' AND keyb = '2' AND keyc = '3'.
Now i startet the test with select-options
e.g.:   SELECT * FROM TABLEA INTO ITAB WHERE keya IN seltabA AND keyb IN seltabB AND keyc IN seltabC.
First of all i just filled the seltabs with only 1 value:    eg: seltabA=      SIGN = 'I'   OPTION = 'EQ'   LOW = '1'     etc.
Everything worked fine. Every key of the index was used.
But now, I putted more than one entries in the seltabs e.g.
seltabA:      SIGN = 'I'   OPTION = 'EQ'   LOW = '1'
                   SIGN = 'I'   OPTION = 'EQ'   LOW = '2'
                   SIGN = 'I'   OPTION = 'EQ'   LOW = '3'
From now on, the indexed was not used completely (with all keys).
Isn't that strange? How can i use select-options or sel-ranges with using the complete table-indexes?
Thanks a lot,
Marcel

Hi Hermann,
i hope this helps:
this is the first one, which uses the complete index:
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" = ? AND "ORGID" = ? AND "KOART_BASIS" = ? AND
"STATUS" = ? AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR "STATUS" = ? OR
"STATUS" = ? ) WITH UR
RESULT: 5 IXSCAN /dbcon/01_con05 #key columns: 4
And the second one, which does not use the complete index! The 3 ranges are filled each with 2 values. Remember; when i fill them each with only one value, the result is the same as you can see above(/dbcon/01_con05 #key columns: 4):
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" IN ( ? , ? ) AND "ORGID" IN ( ? , ? ) AND
"KOART_BASIS" IN ( ? , ? ) AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR
"STATUS" = ? OR "STATUS" = ? ) WITH UR
and here the access-plan
   0 SELECT STATEMENT ( Estimated Costs = 5,139E+01 [timerons] )
5     1 RETURN
5     2 NLJOIN
5     3 [O] TBSCAN
5     4 SORT
5 TBSCAN GENROW
5     6 <i> FETCH /dbcon/01_con
7 IXSCAN /dbcon/01_con05 #key columns: 2
As you can see, only 2 keys were taken for indexed selection!
Any idea?
Kind regards,
MArcel
Edited by: Marcel Ebert on Jul 28, 2009 5:25 PM

Issue with Select options in select statement - ABAP Question

Hi
I am facing an issue with select options. Select statement is returning sy-subrc as 4.
I wrote the program as below:
SELECT-OPTIONS:
s_kunnr FOR bsad-kunnr,
s_lifnr FOR bsak-lifnr,
s_gjahr FOR bsad-gjahr,
s_bukrs FOR bsad-bukrs,
s_saknr FOR bsad-saknr,
s_budat FOR bsak-budat.
In start of selection I have written the select statement as
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs AND lifnr = s_lifnr AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
In selection screen I have not entered any values and executed the program. I am not getting any result. When I debug that, sy-subrc is 4 at above select statement. But table has records.
If am removing the "lifnr = s_lifnr " condition in select then select is returning values.
I am not getting where I made the mistake. Please suggest.
Thank you
Hanu

Hi,
The problem here with where condition select option lifnr = s_lifnr.
Use below select query.
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs
    AND lifnr     IN s_lifnr
    AND gjahr   IN s_gjahr
    AND budat IN s_budat
    AND saknr IN s_saknr.
s_lifnr is a select option and you are passing it as parameter lifnr = s_lifnr.
if you want to pass this s_lifnr as single vale then pass in below mentioned way.
lifnr = s_lifnr-low
BR,
Vijay

Problem in passing select-options to class meathods , type any table

<h1>how to pass type any table to class meathod</h1>
<h3>hi all
       i'm trying to build class to validate the selection screen , like select-options and parameters
       while writing meathod to validate the select-options
       its throwing parameter mismath error</h3>
<h4>i tried like made import parameter in class meathod as 'TYPE ANY TABLE' and tried to pass select-options from my program it is saying type mismatch , how to overcome this problem </h4>
<h4>and i want to pass any select option , either of type lfa1-lifnr or mara-matnr or any other</h4>
Moderator message : Don't shout, use proper font size for explaining the question. This has been discussed in ABAP forums before. Search for available information. Thread locked.
Edited by: Vinod Kumar on Sep 14, 2011 11:20 AM

hI
Triggering and Handling events
At the moment of implementation, a class defines its:
         Instance events (using the EVENTS statement)
        Static events (using the CLASS-EVENTS statement)
Classes or their instances that receive a message when an event is triggered at runtime and want to react to this event define event handler methods. Statement: METHODS
CLASS IC1_VEICHLE DEFINATION.
PUBLIC SECTION.
METHOD CONSTRUCTOR IMPORTING
EVENTS VEICHEL_CREATION.
ENDCLASS
CLASS LC1_VEICHLE IMPLIMENTATION.
METHOD CONSTRUCTOR
RAISE EVENT VEICHLE_CREATION.
REWARD IF USEFULL

SELECT-OPTIONS on custom screen problem

Hi all,
I have a screen added on the standard transaction IW21 (with selection screen definition and called like subscreen). On this screen I have some SELECT-OPTIONS and when I press the button of selecting multiple values, I get the following message: "Requested function & is not available here" (V0 104), where & is long number starting with %..No matter the error message, the values are transferred correctly from the multiple selection screen to my screen. I have added entries to the tables T185F and T185 with the transaction VFBS, but I dont know how to assign the Function codes to SELECT-OPTIONS..
Thanks in advance for feedback!
Anna

Hi, this is copied from SELECT-OPTION documentation:
The LOW and HIGH fields of a selection option are displayed in a length up to 18 bytes long (scrollable up to 45 bytes). If you define a length longer than 45, fields are truncated on the selection screen after the 45th character. This affects the first line of the SELECT-OPTIONS table. You can, however, use SUBMIT to pass longer selection options to a report if they are specified with the addition NO-DISPLAY and thus do not appear on the selection screen. Without NO-DISPLAY, the fields are then truncated whenever the selection screen is processed in the background ( SUBMIT without VIA SELECTION-SCREEN).
regards,

Select-options on selection-screen type char100 problem

Similar Messages

Maybe you are looking for