Select part of hier and deselect sub set.

Hi.
When I select a hierarchy node for inclusion and the select a node below it and mark it as 'exclude from selection' it does not have any effect. The subtree is not excluded in the report.
The same is with intervals if I deactivate my hierarchy. I can select an interval and one of the values in the interval which I mark as 'exclude from selection' but this value is still included in the result.
Any idea why this is the case?
/Christian Frier

In future Swing related questions should be posted into the Swing forum.
http://forum.java.sun.com/thread.jspa?threadID=728988&messageID=4197699

Similar Messages

Select all and deselect all in table control

Hi experts,
I want to make the select all and deselect all options in my table control.
But i can't able to do that one. Kindly suggest me how to do that one.
one more thing, if i select some rows in the table control, and press save it should be saved in some other table. how can i implement that one.
Waiting for ur reply.
Regards...
Arun.

Hi Arun,
In the context node that you bind to the table, set the cardinality as 0..n and selection as 0..n. In the UI element Table, set the property selectionMode as 'multi'. Then a toggle button for select/deselect all will appear automatically in your table. You can see it in the top left corner.
For your second question, after selecting the elemets and pressing 'save', in your event handler, do a get_selected_elements( ) on your node. This will return you a set of context elements. Loop through each element and do a get_static_attributes to get the rows. Then you can append these rows to another internal table and bind it to the context. Bind your second table to this node. If the two tables are in different views, the context nodes need to be present in the component controller and mapped to the views.
Hope this helps.
Regards
Nithya

HT3349 How do you select a sub-set of cells from the entire document so you can print only those specific cells?

How do you select a sub-set of cells from the entire document so you can print only those specific cells?

There is no analog to MS Excels print range. So the next best thing is to plan your data so that you don't need to use print range. The next best thing after that is to select the range of cells you want to print, then copy, the switch to the application Preview, and create a new document from the clipboard (select the menu item "File > New from Clibboard") then select all, copy then paste to the destination (maybe an email) .
You can also paste that portion of the table into another table (or a new table) by pasting values only

I am having trouble burning a gapless album that is a mixed compilation. I have selected part of compilation album on the options tab and I did select gap between songs as zero. When I play the cd, it is sticking between songs? Please help!

I am having trouble burning a gapless album that is a mixed compilation. I have selected part of compilation album on the options tab and I did select gap between songs as zero. When I play the cd back after burning, it is sticking between songs? Please help!

sheldz46 wrote:
Thanks Chris but according to Pioneer, is was possible with the itunes in 2010.
It wasn't. (at least as far as setting Part of Gapless album goes. See next para.)
They claim that itunes will work if you select gapless album, part of a compilation
Selecting Gapless album does not make it gapless. (which is likely that now this option is removed - to not confuse people)
The ONLY thing that option did was tell iTunes to NOT crossfade consecutive songs from same gapless album IF you had crossfade enabled.
-> http://support.apple.com/kb/ht1797
Setting the gap to 0 is what made it "seem" gapless.
Perhaps it is not working as it used to.
Try a slower burn speed.
and used itunes to convert them to mp3
Dont know why they suggest this.
Simply use the WAV file. Then there will be no loss (as there is when converted to MP3).

JList Select and Deselect

well, i set my JList to be multiple selection mode,
say i made two selection on my jlist
and how could i deselect of them !
thx in advance!
Sam

You can use CTRL+click with your mouse in the interface to select and deselect things in multi-mode.
If you want to select/deselect things from inside your code, try using the setSelectedIndices(int[] indices) method which you can find in JList. It should remove whatever selections were made and instead select those items that you specified in the array.

If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it !

If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it ! It wont activate. I just recentely got AT&T. When I had verizon before and my phone got disconnected it allowed me to still iMessage off my number.

If your phone service is disconnected, it's not your number any more.
If you "just got AT&T", how can it be disconnected?

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

Selecting and deselecting desktop background images

Can I select which Apple photos to use when setting desktop background to Change Picture? Put another way, can I deselect pictures I don't want to see? I hoped the "-" box at the bottom of the list would let me deselect folders or even specific images within folders, but it doesn't. I would like to have only the nature pictures in the Change Picture rotation.

You would have to create your own folder or album with select photos for this type control.
Use the + sign to add your album.

Fcpx - after selecting part of a clip, marking in and out, pressing the e key does not add it to the timeline. what do I do?

At the Mac store they showed me how to select part of the clip, Mark in an out, and then use the key board shortcut, the E, to move back down to the end of the timeline. At home it refuses to do that. I can't even drag it down. I am using Snow Leopard, not lion. Can anybody tell me why I can't get the material down to the timeline except as an entire clip?

I was stuck in this exact same position yesterday, and wow was it ever frustrating. I can't remember the exact steps I stumbled upon to figure it out, but basically you need to create a "project" (not a "sequence" like you'd think - there is no "new sequence" command in FCP X) and that "project" will in fact be the sequence you are able to add your selections to.
The same real estate the sequence lives in is also where the "project library" lives, which will overtake your sequence if invoked - look to make sure the film reel icon at the bottom left of the screen is not active (blue). If it is active, click it to make the project libary go away.
I'm still struggling with FCP X as a long time professional FCP 7 user, and from what I've read this isn't uncommon. Best of luck getting past these fisrt few awkward hurdles and onto the actual editing (which, I have to say, so far I am having a hard time being precise or creative with).

Selecting and Deselecting Images in Aperture

Is there anyway to select images in Aperture and keep them selected until you deselect them? For example if I close Aperture I would like to be able to comeback and the images are still selected.

No, Aperture won't remember your selection after quitting.
You can get around this by creating a new album from selection, or a assigning a temporary keyword 'selected' which you can then filter for when relaunching aperture to select the same images again.

Data types used in a sub VI - selecting the correct input and output types?

data types used in a sub VI - selecting the correct input and output types?
I can never work out how to choose an input or output format for Subvi's.
I want to create a SubVI for the code in red. I needs an VI Server Reference compatible input and an output that goes to a waveform.
Thanks in advance.
Attachments:
data types.PNG ‏11 KB

GerdW,
I realise now I have taken us in the wrong direction. apologies for that.
History, this is not my code and I do not own the process and NOT my preferred method of using it. I was looking for a simple way to make subtle changes.
What we do - We use these programs to collect data from typically 6 pressures and 6 temperature probes and capture RS232 / USB VISA strings from sensors.
So every few weeks / months or up to a year we rearrange each sensor location to suit the new process. I did not write the code. I cannot change the procedure too much without resistance.
So headers in the CSV file have the DaqMX string passed through the code. Great.
Other data to the CSV file comes from calculations or extracted from the VISA string. Hence why we have headers with "Untitled 1 ()". These values also go to a History Chart.
So I was looking for a simple way to read the the local variable label as it is always linked to the front page indicator. People can cope with editing the indicator label, save the VI and hit run.
TL;DR - GerdW is now a psychologist.
Attachments:
data to csv and history chart.png ‏1043 KB

Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

Thanks. Beforehand, I was double clicking on the multicam clip and forced to make a marker on either the Cam A or B. I realize now that I can do it in the Event Browser. THANK YOU.
Considering I may create >20 markers per clips for around 10 different interviews, I wish there was a way to bring the Event Brower to the bottom half of the FCPX windows, to resemble the screen orientation when I'm working in an actual project (one could do this in iMovie), and this way the markers could be listed to the left without having all the other event clips around it. Is that clear? Is that possible?

I used bootcamp assistant to partition my hard drive to install windows. When I got to the part to install windows, I selected the bootcamp partition and then choose format as instructed but it would not continue stating that the partition was in GPT par

Please help!! I partitioned my macbook pro hard drive in bootcamp so that I could install windows. Everything appeared fine until I got to the install part. I selected the BOOTCAMP partition and then selected format as instucted. That was it. The install could not proceed because it says the partion is in the GPT format instead of NTSF. At this point it erased the "BOOTCAMP" name from the partion but the partion still exists.
I tried to reform by going back on the OS side, in disk utitly, erase and format. It will not allow me to select NSTF format.
What do I do to fix this??
Thanks for you comments.
Kristina

In Boot Camp Assistant when you select the format option the Boot Camp partition it automatically formats the Boot Camp partition as NTFS since this is what Windows requires. There is no option to select NTFS or any other format type.

Hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim c

hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim card it says that simcard not recognized. I tried all the solutions in the net but nothing seemed to work. What should I do? I'm located here in the Philippines. I hope you could help. Thanks!

I know. I was with my brother when we did this. He didnt clearly understood the question that poped-up. Regarding the simcard, after successfully restoring it on itunes my simcard won't work. I'm not able to send and receive calls and messages.
hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim c

When I log into hotmail, I cannot select part of an e-mail and print just the selection. This will work with other borowsers.

I can print an entire e-mail when I log into Hotmail using Firefox, but if I select part of the e-mail and tell the printer to print the selected part, all I get is a blank page coming from the printer.
I can print the selected text if I use Internet Exlporer as a browser to log into Hotmail.

Hi,
My dad told me he had this 'no selection' problem when he wanted to print out a selection in Hotmail, so I had a hunt around, but didn't find a definitive solution.
So, I have done some playing around, and have come up with this solution which works if you want to print out a selection in Hotmail (using firefox), but it is now greyed out.
It seems to be connected with the way that Hotmail handles frames.
(Thought I would post it as posts like this have helped me a ton in the past :0))
'''To print a selection in hotmail you need to do this.'''
1/ On the email you want to print click the small Printer icon in the hotmail menu.
There is no need to highlight a selection at this stage because the email is in a frame, so it will do no good anyway.
2/ A new page will open up and the printer dialog box will open up.
Close the printer dialog box.
3/ Highlight the text selection that you want to print on that page.
4/ Press Ctrl-P on the keyboard.
5/ The printer dialog box will now pop up again and you will be able to choose 'Selection'
Your selection will now print.

Select part of hier and deselect sub set.

Similar Messages

Maybe you are looking for