Select query is working on oracle 10.1.0 but its not working in 10.2.0
select query is working and retrieving some data from oracle database server 10.1.0.2.0, but same query is not working in 10.2.0.1.0 database server, its throws(ORA-00942: table or view does not exist)
But schema related tables and relevant details are same in 10.2.0.1.0 database server, so don't think that table is missing on that schema.
Note: Query length is upto 480 line
I have validate all the things, everything is fine, i don't why that query is not executing in different version.
I am in helpless in this situation?, anybody faced this issue?
Thanks in advance
Validated means all the tables and and columns are verified, i just running in sqlprompt,
Say for example:
sql> select * from table1;
One thing i observed while executing the query its showed error in one location of select sql. i mean particular word in select sql.
After that i combined some three lines of huge select sql into single then i am getting error in different location i mean different word...
My question is how same query executing in Oracle 10g Release 1, same dump (its exported from Release1) imported into oracle 10g release 2 is not executing. its shows Table or view doesn't exit.
Similar Messages
-
Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.
Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.
-
I want to use a dynamic schema name in the from clause but its not working.
DECLARE
vblQueryName VARCHAR2(20);
vblSchemaName VARCHAR2(20);
BEGIN
SELECT CurrentSchemaName INTO vblSchemaName FROM HR_989_SCHEMA;
vblQueryName:='060_525_020';
INSERT /*+ APPEND(HP_ELIGIBILITIES,4) */ INTO HP_ELIGIBILITIES
LVL1ID,
LVL1Desc,
LVL2ID,
LVL2Desc,
LVL3ID,
LVL3Desc,
LVL4ID,
LVL4Desc
SELECT /*+ PARALLEL(a,4) */
LVL1ID,
LVL1Desc,
LVL2ID,
LVL2Desc,
LVL3ID,
LVL3Desc,
LVL4ID,
LVL4Desc
FROM
bold vblSchemaName.HP_ELIGIBILITIES a
WHERE
UPPER(LVL2ID) = 'XX' ;
COMMIT;
DBMS_OUTPUT.PUT_LINE( 'Query Executed: ' || vblqueryName);
INSERT INTO HP_QUERYEXECLOG(QueryName) VALUES(vblQueryName);
EXCEPTION WHEN NO_DATA_FOUND THEN NULL;
END;
I want to create a rules table so that the schema name in front of the table name in the from clause can be controlled by a separate table that is maintained but its not working . Help and your valuable inputs needed for this issueI want to use a dynamic schema name in the from clauseyou can alternatively set the current schema as e.g. in:
declare
vblqueryname varchar2 (20);
vblschemaname varchar2 (20);
begin
select currentschemaname into vblschemaname from hr_989_schema;
vblqueryname := '060_525_020';
execute immediate 'alter session set current_schema=' || vblschemaname;
insert /*+ APPEND(HP_ELIGIBILITIES,4) */
into hp_eligibilities (lvl1id,
lvl1desc,
lvl2id,
lvl2desc,
lvl3id,
lvl3desc,
lvl4id,
lvl4desc
select /*+ PARALLEL(a,4) */
lvl1id,
lvl1desc,
lvl2id,
lvl2desc,
lvl3id,
lvl3desc,
lvl4id,
lvl4desc
from hp_eligibilities a
where upper (lvl2id) = 'XX';
commit;
dbms_output.put_line ('Query Executed: ' || vblqueryname);
insert into hp_queryexeclog (queryname)
values (vblqueryname);
exception
when no_data_found
then
null;
end; -
I forget my password to my ipod and i have try to rerstart it but its not working what should i do?
i forget my password to my ipod and i have try to restart it but its not working. i have done i could think of please help!!
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
4. What to Do If You've Forgotten Your iPhone's Passcode
5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the
Back Up option. If you have just backed up the device, it is not necessary
to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
Ive tried to reset my iclouds password but its not working
i need to activate iphone 4s, ive tried on my laptop to re-set it but its not working, ive been trying for the pass 3hours?
i just want to use my phone again?
i cant remember setting a password?
I aslo cant remember if i created two different passwords for iclouds and appleID.
NEED HELP?Contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.
-
Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice
Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock -
i bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working.
I saw cidya aap so i m not sure if it was jailbroken or not before but it is back to normal settings.
My problem started when I tried to sync my music files. I pressed 'sync' all it says is waiting for sync start, preparing to sync and then waiting for the changes to be applied. but it does not sync at all.
I found a way to sync my music files through autofill but I really wanted to sync ringtones but its not syncing and I really wanted to put ringtones in my phone please help.If you see the cidya app, your iPhone is hacked with the cutsie term for this being jailbroken. This also means all the built in security has been removed making the iPhone as insecure as an android device.
Restore the iPhone with iTunes as a new iPhone or not from the backup to get rid of that hacking garbage. If the iPhone has hacked to be unlocked, the iPhone will no longer be unlocked when doing so. -
my iPhone was working properly n suddenly started vibrating for 5 mins with any display n then it turned off...i charged it overnight but its not turning on??? please help??ip
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
Have tried to verify my icloud account, but its not working, the Verifying screen has been scrolling for ages now, it seems stuck, but it wont let me do anything, please help
" I ordered the Snow Leopard software and tried installing it, but it stopped and said to clean the disk."
First off, your installation disc is in all likelihood faulty.
This has been a known issue in the past:
Faulty Snow Leopard install discs - Apple has no timeline on ...
http://store.apple.com/us/help/returns_refund#policy:
*You can return software, provided that it has not been installed on any computer. Software that contains a printed software license may not be returned if the seal or sticker on the software media packaging is broken. -
My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?
How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.
-
my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
i just got a new i pod and cant connect to wi fi im putting in the right passcode but its not working what should i do?
Try:
- A reset. Nothing will be lost
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on the router.
- Resetting network settings: Settings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
Im trying to reedem my card but its not working
im trying to reedem my card but its not working
Go here and select iTunes Cards and Codes:
http://www.apple.com/support/itunes/ -
i just buy operativesystem onlocker from 3 webshop i got the mail and it says i need to but it on itunes i do the all steps but its not working its lockt to 3!
sorry my english is very cash I think we got the paper on the lock operator and we have done all the steps but it will not play if it is unlocked, bought locked to three paid 350kr
-
i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
Calling stored procedure in Oracle forms
I have a stored procedure in Oracle which is declared as follows in the package SFCS1.Company_Selection(O_Cursor IN OUT T_Cursor, cls IN Varchar2); Where T_Cursor is defined as a Ref Cursor From the Oracle forms I'm using the following code SFCS1.Com
-
Runtime Error in JTable with JTableModel Implementation
Hi, I tried to do a JTable (named "table) in my program, with an implementation of JTableModel, called DataContent (obj named "dc"). Now if I try to change dc's data and refresh the table in the window by doing a "table.setModel(dc);", my programm gi
-
A window that keeps poping up ( Java Script Application) uninstal set.
This happends everytime I use FireFox. It dosen't when I use Internet Explorer but; it's slow. I have windows XPSP3
-
Spark List Itemrenderer items outside of List
I have a spark list and i want some of the items in it to appear out side of the list depending on the users interaction. Is there a way to make items of an item renderer appear outsid of the LIst container? When i use basic layout on the lsit and ex
-
BI 4.0 WebI desginer shaky with BEx query as source
Hi All, I am working WebI on BI 4.0 with both WebI Rich client and launching WebI through BI launch pad. In both cases when drilling down query output after refresh, the output blurred or shaky. Previously I was on old Java version now I have updated