Selecting Member Name and also Alias in Web Analysis report

I have made a web analysis report and now i want to show member names as well as alias of the members which i have selected on row side. How can i do that?
Thanks in advance.

in the member properties, you have an option to show alias, member name, or both. Click on both / alias as per the requirement

Similar Messages

Drill Down and Drill UP on Web Analysis Report

Hi all,
I have a question regarding Drill down and Drill up on Web Analysis Report.
The situation is the following:
I've created a report with some account parent elements in row. The dimension account has a multiple hierarchy.
I need to drill down on the child of these elements keeping the parente on top and so i've selected the option "Selected Member First".
The drill down it's ok for the first drill to go on the next level but when i drill down once more to go on the next level of the selected member hierarchy the drill move this level out hierarchy.
Can someone help me on this point?
After that i've drilled just to the last level when i drill up on these elements to return on the previous level i note that in the report happens a strange thing:
The Drill Up works fine but on the report appears another elements which is the same parent with anothe code/alias of another hierarchy instead of the Selected member.
On this i've noted tha this 2 different parente have the same elements...I think that the children of the selected memeber can be shared members....Can be this the problem?
Thanks for the help.
Best Regards
Eugenio Gualtieri

Hi John,
thanks for your answer.
I've trayed to set the report on Smart View to virify tou test your advise.
The situatio is the following:
IS05101010-PUBBLICITA'
702000 - VEND. DI SPAZIO PUBBLICITARIO
702010 - RETTIFICHE VENDITE SPAZIO PUBBLICITARIO
W10004 - RICAVI PUBBL ICITA' ATTIVA (Q.EDIT) INTE
W10007 - RICAVI DA SPAZIO PUBBL. INTERASA
W10029 - RETTIFICA RICAVI PUBBL. INTERASA
ED05101010-PUBBLICITA'
702000 - VEND. DI SPAZIO PUBBLICITARIO
702010 - RETTIFICHE VENDITE SPAZIO PUBBLICITARIO
W10004 - RICAVI PUBBL ICITA' ATTIVA (Q.EDIT) INTE
W10007 - RICAVI DA SPAZIO PUBBL. INTERASA
W10029 - RETTIFICA RICAVI PUBBL. INTERASA
If I take only one parent member the drill up works fine but if i take all 2 memeber as above and i decide to drill up on one of the two element occur that the drill work for the two elements at the same time.
Afetr the drill in this case the situation is:
IS05101010-PUBBLICITA'
ED05101010-PUBBLICITA'
Can be a problem due to shared memebers?
Thanks for your help.
Regards
Eugenio Gualtieri

Web Analysis reports based on Planning application

All,
I have migrated planning application from dev to prod using LCM, planning version 11.1.1.2. everything has been migrated and working fine.
Web Analysis reports, and Database connections are also migrated from DEV to PROD.
User has uploaded some PLAN data for FY10 through smartview on PROD server, but unable to see the data using Database connection migrated from DEVL but he can see the data when he creates new database connection on PROD.
both database connections are from same database but he cannot see any new data uploaded through smartview with old database connection and he have tons of reports based on old database connection.
can I change database connection for old reports with new database connection or do I need to fix something on my planning side.
Please provide some suggestions. I can give more info if required.
Thanks
Ravi S

Hi,
LCM will have created xml exports with the database connection information in them.
If you open one of the xml database connection exports you will see something like
<server-name>localhost</server-name>
<application-name>PLANSAMP</application-name>
<database-name>Consol</database-name>
You would need to update the information such as the servername in the files then import them in again using LCM.
Cheers
John
http://john-goodwin.blogspot.com/

How to display member name and Alias in seperate columns

Hi,
We have a report in HFR which has Employee dimension. We set that member display both Member name and alias. But the report showing both in one column with a - seperator. Is there a way to display them in seperate columns.
Thanks,
DD

Thanks Mehmet. But whenever I try to insert a column, it throws this error: You can't insert a column here.
I have the grid like this.
Account
Children of Employee
I need to display the member name and alias of Employee dimension inseperate columns. Could you Please help me how to do it?
Thanks,
Ram.

HT204053 I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

It's evident that you are using Snow Leopard or earlier (or very early Lion) since you have the now obsolete MobileMe preference pane.
The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.

How to change the Name and/or Alias of a Public Folder Mailbox in Exchange 2013

So when I migrated our servers from 2010 to 2013. I did not plan well and ended up with this.
Name                      Alias
Mailbox1                  PF1
Mailbox2                  Mailbox2
Mailbox3                  Mailbox3
As you can see the first mailbox is named PF1. I want to be able to change both the name and the alias, but have failed to find mechanism for doing so in ecp or powershell. Any assistance is greatly appreciated. I would also like to change the email address
for these as right now they are [email protected], [email protected], [email protected]
Thank you very much

Set-Mailbox -Identity Mailbox1 -PublicFolder -Name NewName1 -Alias NewName1 -PrimarySMTPAddress [email protected]
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

HT5361 Why can't I put a address from my address book in the to: by pressing click in address book ???? I have to select the name, and then go to To: and press to get the name entered....

I have been trying since I installed Mountain Lion to get my mail to put my names from my address book into my new messages, but I must select the name and then select To: Box to transfer name, Why????

You cannot mve the songs manually from iphone to your computer.
The way you do this is exactly what you did : File>Transfer Purchases

When using bbbc I player the screen goes black after 30 secs and only get audio. I have latest version of the app and also tried via web browser. Any advice it is so frustrating

When using bbbc I player the screen goes black after 30 secs and only get audio. I have latest version of the app and also tried via web browser. Any advice it is so frustrating

Is this an app bbbc? IF it is I would contact the app developer and see if they can resolve the issue for you.
also take a look at the reviews and see if other users are having the same issue and see if they have a resolution.

How to get selection screen elements and its table reference of a report ?

halo experts
How can I get selection screen elements and its table reference of a report ? . I tried rs_refresh_from_select_options. But I am unable to get the table and field it is referring to
For eg if my selection screen 1000 is
parameters: p_carrid type spfli-carrid,
select-options :s-_connid type sflight-connid.
is there any Fm or method which gives me what are the screen elements( p_carrid and s_connid ) and what table( splfi and sflight ) and field ( carrid and conid )it is referring to ?

The following code is an example of how you might dynamically determine all your PARAMETERS and SELECT-OPTIONS variables at run time. The PARAMETERS and SELECT-OPTIONS only point to a dictionary element--not a specific table. Even though you may say "spfli-carrid" or "sflight-connid", the data type really references the dictionary type and not a specific table/structure.
REPORT ZTEST_PROG.
TABLES sflight.
DATA:
       screen_tab TYPE STANDARD TABLE OF screen,
       wa_screen TYPE screen,
       scrn_nm TYPE string,
       scrn_leftover TYPE string,
       l_type TYPE REF TO cl_abap_typedescr,
       typ_nm TYPE string,
       typ_pre TYPE string.
FIELD-SYMBOLS <fs_data> TYPE ANY.
PARAMETERS p_carrid TYPE spfli-carrid.
SELECT-OPTIONS s_connid FOR sflight-connid.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-group3 = 'PAR'
      OR screen-group3 = 'LOW'.
        APPEND screen TO screen_tab.
    ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT screen_tab INTO wa_screen.
    ASSIGN (wa_screen-name) TO <fs_data>.
    l_type = cl_abap_typedescr=>describe_by_data( <fs_data> ).
    IF wa_screen-group3 = 'LOW'.
      SPLIT wa_screen-name AT '-' INTO scrn_nm scrn_leftover.
      TRANSLATE scrn_nm TO UPPER CASE.
    ELSE.
      scrn_nm = wa_screen-name.
    ENDIF.
    SPLIT l_type->absolute_name AT '=' INTO typ_pre typ_nm.
    WRITE:
             / 'Screen Name: ', scrn_nm,
             / 'DDIC Type:    ', typ_nm.
ENDLOOP.
When you get into defining internal tables you can determine those at run time with cl_abap_structdescr. The following is an example of how you might do that. You can loop through the "components_table" and evaluate each field of the structure in this way.
DATA: structure_reference TYPE REF TO cl_abap_structdescr,
      components_table TYPE abap_compdescr_tab,
      components_structure LIKE LINE OF components_table.
structure_reference ?= cl_abap_structdescr=>describe_by_data( any_structure ).
components_table = structure_reference->components.
I don't know if this answers any of your questions but I hope that some of it is useful.

POV and User POV in Web Analysis 9.3

Hi,
I am a bit confused with POV and User POV in Web Analysis 9.3.1. I have a few web analysis dashboard to be used by several different groups of users. I use the admin to go in and for each of the report, I set whether need to use User POV (in data layout option) and/or use POV (the POV is activated in the database connection).
However, I use the other user id (no the admin) to login and go to each of the dashboard, such settings of using User POV and/or POV are not valid. I wonder which setting I can set so that all the user will inherit the POVs setting from the default one.
Since I have too many users, I can not use each user id and password to do such settings individually.
Any recommendations? Thanks in advance.

If your chart's selections and therefore it's colors are basically static, try creating the legend by hand.
Our users requested that the Legends be different than what we could get it to display so I turned off the Legend and created my own. Since the colors on my graph don't change I was able to hard-code the legend. Place a new, small panel inside your chart where you want the Legend to be. Then create colored squares using MS Paint (fill a square then Colors | Edit Colors to specify the exact RGB) that match the colors of each bar/pie slice and insert them as Images on the panel. Re-size so they're small. Then create a text box next to each color for your Legend text.
Then enable a Line Border on the panel & that should do it. Right click on your chart and choose Send To Back so the Legend is on top.
My legend is in a panel beneath the chart (not inside it) but the above steps should work for what you need.
Be sure when you view this on whatever your standard resolution is such as 1024 X 768 that the legend & titles appear where you want them, otherwise move things around until it's satisfactory.
Good Luck,
Karen Smejkal

Disable Save and Save As in Web Analysis

I have some standard Web Analysis reports that I want to share amongst users. I've created a common folder in Workspace and saved the reports (each is just a simple grid) to the folder.
If my users are provisioned as Viewers they can drill up and down on the grid but not navigate the dimensions (no pivoting).
But, and this is the question, how do I stop Web Analysis from prompting them to save the report if they have drilled down? If the user does click on Save the file is not saved. The same goes for Save As -- the user can type anything he likes -- regardless of location (personal folder or originating folder) or name (same value or a different one) the file is not saved.
Thanks,
Cameron Lackpour
Edited by: CL on Oct 3, 2008 10:50 AM
Whoops, I forgot to add that this is Web Analysis 9.3.1

Iain,
Thank you for your answer -- that did the trick.
Bizarrely (I use that word a lot wrt Web Analysis), I cannot see this setting for Viewer provisioned users but I can for users provisioned as Analysts/Report Designers. In my case that's fine as I need to move users to that level of provisioning to allow them to swap dimensions and save the reports to their custom folders when desired.
Thanks again.
Regards,
Cameron Lackpour
P.S. Yes, having each user change it manually/separately is a pain but that can be addressed in training.

Migrating HFR and Web Analysis Reports and Documents

Dear All,
Is there any way I can migrate HFR and Web Analysis Reports and Documents from test environments to production instead of re-creating reports?
Thanks,
ioGGo.

For HFR reports,
- If you want to do a bulk export, then choose File->Export & select multiple reports & save to a .zip file when prompted. In this case, reports' folder hierarchy is maintained the same as in source.
- If you want to do a selective export, select the folder(where your report is present) from the (left)navigation pane. Then choose File->Export, select the report & save to a .des file when prompted.
For WAS reports,
you may export each report definition from File -> Export. I believe- it'd let you save as .apt file.
However, for both type of reports, you need to ensure the respective database connection file(s) are already present before you import the reports/documents in your prod. environment.
- Natesh

What are the names and the parameters of the SSIS reports

what are the names and the parameters of the SSIS reports
(delivered with and included in the SSMS)
to navigate from my reports to the build in reports
it's necessary to know the reportname and the parameters.
I want to "combine" respectively want to navigate
from custom reports (works excellent) to the 5 build in reports
please have a look at the attached picture and in particular
to the blue arrow.SSIS_ReportsNavigation
thank you for providing an answer or a hint.

to navigate from my reports to the build in reports
Those integrated reports in SSMS are not hosted in SSRS, so there is no URL available where you can navigate to.
The reports run in client side rendering mode = RDLC.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Need assistance in Hyperion Web Analysis Report

Hi All,
I am using HFM with Oracle database as the data source for reports and using Hyperion 931 components.
I have a requirement in Key Performance Indicators reports (KPI)
1) Need to have a custom column of current year Actuals Vs Plan data
2) Need to have a custom column of current year Actuals Vs prior year Actuals data
3) Need to indicate Font colours based on the values derived in columns (1) and (2) - if positive data - green colour
if negative data - red colour
I am trying to replicate this in Web Analysis report, but facing issues on
1)Making this year value dynamic (shd change based on current year or atleast should prompt when we run report)
2) Since i have fixed the report with 2008 and 2007 year, all the formattig made whiel creating the Report goes away, if i try to run the report with different year values like in 2010 and 2009 year (as current and prior year)
3) Also, i have hided some coulumns based on our requirement which also no longer exists if i change the year values (available in coulmns)
Please suggest any comments to resolve these issues, Moreover i am new to Web Analysis reporting tool ,so kindly suggest, if i am not using any of the existing WebAnalysis features to derive my requirement.
Expecting your earliest response.
Thanks,
Siva

Hi Siva,
If you are using the Essbase as a data source then you can achieve these things from using the substitution variable in WA report.
Assume you have a substitution variable in Essbase cube for current year. In WA report in Dimension Browse, right-click a dimension member and select "Substitution Variable”. The Substitution Variable dialog box is displayed. Here select a substitution variable from the list of Essbase substitution variables.
To get the Prior year, again in Dimension Browse, right-click a dimension member and select the "Also select Previous". Here define the prior year that you want to use in your report.
Sorry, I have no idea about the substitution variables in the HFM (It might be that we call the substitution variable with another name in HFM).
Hope it will help you.
Thanks & Regards,
Mohit Jain

Selecting Member Name and also Alias in Web Analysis report

Similar Messages

Maybe you are looking for