HT204053 I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

It's evident that you are using Snow Leopard or earlier (or very early Lion) since you have the now obsolete MobileMe preference pane.
The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.

Similar Messages

The hard drive on my MacBook died and I had it replaced. I can't locate my website files and every time I try to open my idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name or password?

The hard drive on my MacBook died and I had it replaced. Now I can't locate my website files and every time I try to open my finder/idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name or password? Any suggestions out there

Arty ~ Welcome to the Support Communities. iWeb can't import/open published HTML/media files on your iDisk. iWeb can only open its key Domain file which contains your site data — it's usually located here:
...If you don't have a backup of your Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWeb_Backup_retrieve.html
Also this thread may help:
Hard Drive replacement causes new/unknown user password?

When I try to install flash player on my mac, I get to the panel that asks for my name and password, and it will not take my password. tried changing to a new password and same result

When I try to install flash player on my Mac, I get to the panel that asks for my name and password, but it will not take my password. Tried changing the password, but same result. Suggestions??

This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.

Firefox asks for user name and password even though the proxy auto detection

After upgrading Firefox to ver. 6.01 and next to 6.02 Firefox asks for user name and password of proxy server even though proxy settings are set to Automatic detect proxy settings.

Sorry can't do anything more than offer support. We have been having this problem for months and support is clueless. Do you also have the migrating homepage issue? We can have 3 or 4 different homepage set-ups throughout the day. Between Verizon and FIOS, there isn't an employee in the corporation who cares about customer service. Since the failed email migrations dating back to Spring of 2011, we have had this login situation constantly. Our normal login count for a day is 12. We figure they are regulating traffic by having customers constantly login.

HELP! my mac has logged me out and now asking for a name and password?

I was logged on shopping on top-shop online and suddenly the mac shut down.
It seems it has reset its self! My icon has disappeared and its now asking for a name and password.
i have tried my log in but it is not working.
Is there another way to reset the password?
can i reset it to log back in what can i do?
I have rebooted the computer several times but i dont know what to do!

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination command-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

My HP office jet 6500 printer is stuck on pause. I do not have an admin name or password as it is a wireless printer and I never had to set one up. It keeps asking me for admin name and password...

My HP office jet 6500 printer is stuck on pause. I do not have an admin name or password that it keeps prompting me to give, as it is a wireless printer and that info was not required when we set up the printer. I have checked all diagnostics and connections and they are all good/passed. I am so frustrated!!! This has never happened in the past.

What is asking you for an admin name and password? What does the dialog say, exactly?
What model iMac are you using, and which OS version?
If it is earlier than Lion or Snow Leopard, try deleting the printer and adding it again as explained in this document
http://support.apple.com/kb/TS3140
Otherwise you can "reset the printing system" as explained here
http://support.apple.com/kb/HT1341
and here
http://support.apple.com/kb/TS3147
Download the latest drivers here (Lion, Snow Leopard)
http://support.apple.com/kb/DL907

When I try installing Firefox 6.0 from the binary file, a box with "Run As" in the type field appears, which asks me for user name and password. Please advise about the course of action that I should take.

Trying to run it as the current user, or as one from a different account(administrator in this case) also doesn't work.

I think the client is not able to do a HTTP POST
to the WLS server but it can do a HTTP GET.
I dont know why.
http://manojc.com
"Ganesh" <[email protected]> wrote in message
news:3eba91bc$[email protected]..
>
Hi,
I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
invoke the web service through my browser (IE 6.0) using the web servicesurl,
it brings my service method correctly. From there, if I click the invokebutton
it asks me for a network user name and password under "weblogic" realm???If I
provide the admin user credentials (which I supplied while creating mydomain)
it is not accepting that it keeps popping up this network user passwordwindow
over and over. Not sure which username/password I have to provide here tosee
the result of my service.
If I try to invoke the web service through my client (static) I am gettinga connection
refused exception. I guess either way, I am not able to access my webservice.
In the attached file, I have cut and pasted the client stack trace as wellas
the server log trace from weblogic.
Any ideas would be highly appreciated.
Thanks,
Ganesh

On my macbook pro under dashboard, you can go to a page to order more widgets, it asks for ur name and password, but I can't get in under any thing I enter. What procedure must you go thru to order more widgets?

Trying to download a new widget for my dashboard, it wants a name and password. I tried the main one I log into with, I am the administrator, tried my email account and also my cloud account. nothing seems to work. I wanted to dowm load webcams that show Hong Kong senery's. Can anyone help with this?

Create a New User Account, and as that New User try to set up this one account -- as it is POP, set to leave messages on the server after download. If not familiar with setting up a New User Account, see:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
This will be a useful test, and is not meant to suggest a permanent switch to the New User Account, but rather a test of the Mail application outside of your normal User Account.
Also in System Preferences/Networks click on Advanced, then Proxies and make sure no proxy selections have been checked.
Ernie
Message was edited by: Ernie Stamper

IPad 4 asks for User Name and Password to access home wi-fi network

I have the iPad 4, which occasionally fails to connect to my home network and will ask me for both an User Name and Password to access my home wireless network. I have no idea what would constitute an User Name and I have tried the name of the network and other options to no avail. When I close down the iPad and take it closer to my Wi-Fi Router (BT Home Hub 3) then switch back on it asks for the password only as normal and all is well. What concerns me is this only happens on the occasional basis, but I am trying to access the router from exactly the same place.
Is there a fault with the wireless function on the iPad? I have contacted Apple Support by telephone and they were very helpful to be fair, but they had not come across this issue before.
Has anyone experienced anything like this and could advise me? My other option would be to email Apple Support, but I cannot find an email address for Apple Technical Support UK.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT1362 I got a 2000 iMac from a friend. I do not have anything with it. No disk or anything. When I turn it on it goes to a welcome to Mac OS screen. It says hello Hilda then it's asking for a name and password . Can anyone help me.

I got a 2000 iMac with OS 9.1. I do not have the disks for it. The person who gave it to me could not remember the name and password they gave it. When it comes on it goes to the welcome to Mac OS screen. It has hello Hilda and under that it wants a name and password. What can I do. I tried shutdown and restarting holding down the command and s key but that does nt do anything. Please help

You'll need some installer discs for it to do anything. But as old as that is it may not be worth the trouble. You may find some retail copies of OS 9.1 on eBay or Google. You can install OS X on those old machines, but the maximum version is 10.3.9 (Panther) which may be getting difficult to find.

CIC0 - asks for user name and password on CRM

Hi folks,
I am a BASIS gui am facing a peculiar problem with our production CRM system. It is a CRM 5.0 system and we have no java stack . The customer service users have reported on a daily basis when they are logged into CRM system and working with CIC0 transaction for several hours, suddenly a pop up comes up stating
"The server <CRM server server name> is requesting that a user name and password be sent in an insecure manner (basic authentication without a secure connection) "
This is happening when a user logged on the CRM system itself. There is no java stack on this system, pure ABAP system. When this popup comes up, the user then puts his/her user name and password and hits ok and is able to continue with work only to be interrupted the next day in the middle of work. So they are able to login , keep doing their for hours and suddenly are asked to revalidate their user name and password.
1. If the user is logged in for several hours and is working fine, what happens suddenly that the user name, password is forgotten and requires to be re-inputted?
2. Is this related to the browser? But the users only work on CIC0 abap system, they do not open a browser , and this is not via portal or a web-ic link...this is all pure abap login via a sapgui.
3. I have copied the same user and am testing to see if the pop up pops up on me...but so far this pop up is not comming up for me....can this be related to user's local desktop windows or browser settingis there any password cache setting ..if so does it mean every time user tries CIC0, a cached password is sent to the server ......I am confounded ...where is the issue, what settings is this related to...
Thanks for any help...
regards, Vikram

Hello Vikram,
Apparently CIC0 makes use of WAS which requires separate authentication. This can possibly explain this issue. Just check if you have maintained the local SSL certificate. Also ensure SSO is also in place. Check STRUSTSSO2 for this.
Regards.
Ruchit.

WLAN network always prompts for user name and password...

Hi,
Everytime Airport detects the WLAN of my institution, it prompts "Authenticating to network" and I have to put in my user name and password. Is there any way to store this information (probably in the keychain) so that an automatic login to the WLAN [as in my home network] is possible? The problem is that I can not find any button like "save this password in the keychain" [you can only put in user name and password]. Is it possible that my institution prevents automatic login?
I also tried to create an item in the keychain directly - does not work.
Cheers

Hi,
I agree in that there has to be a prompt for WLAN access. Otherwise just everyone could step by and use the access. But if I have to authenticate once, why should the institution prevent an automatic login for me in the future? Well, okay, if someone steals my notebook and knows my master password... hmm, so there is no way to locally (on my notebook) use some software that automatically puts in my user name and password so that I - maybe - only have to push the "Go/Enter/Access" button?
For example, some institutions use browsers to authenticate and 1Password, but also Safari natively, can automatically fill in the information.
Cheers

Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

Every time I send an email, OSX sends a request for admin name and password. How can I stop this?

OS X want to make changes. Type an administrator's name and password to allow this. OS X wants to use the "System" keychain."

Hello rosern,
Thanks for using Apple Support Communities.
If you're continuously being prompted to enter the administrator password to unlock your Keychain when you're using Mail, then I'd like you to please follow the directions outlined below.
If you entered the correct password in the password dialog in Mail, but continue to be asked for your password, try these suggestions.
In Keychain Access, locate and delete the email account password item.
In Disk Utility, select the volume (for your hard disk or disks) in the list, click First Aid, then Verify Disk. After you’ve verified (and repaired, if necessary) the disk, try sending yourself a message.
Mail (Yosemite): If Mail keeps asking for your password
Take care,
Alex H.

Adobe Reader 9 keeps asking for admin name and password

I just installed Reader 9. Every time I open the app it asks for an admin username and password. I can click "cancel" instead of entering the name and password and the program continues to open, but this is very annoying. To clarify: I am not referring to password protected documents. The Reader 9 app itself is throwing up this dialogue each time I launch it.

Aha! Montana... I hope you catch this. I just had Adobe Reader do the same thing... I realized it was just an udpater so I ran Spotlight to see where the critter was on my drive. Check out Applications/Utilities/Adobe. It should be lurking in there. Just delete it. Then if you want, you can update your Adobe Reader from their site at your leisure.
Carolyn

HT204053 I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

Similar Messages

Maybe you are looking for