Selecting placeholder in template document

I am trying to delete a placeholder in a brochure I am working on. I didn't notice this one when I deleted the other ones. It will not let me select it. I have tried forever. Does anyone have a hint on how to get rid of it?

Welcome to Apple Discussions
Sorry, more questions than answers to start. Which brochure template are you using & which placeholder? It also helps to know which version of Pages you're using. Knowing which one will help others figure it out. The template designers used many, many different methods that it's impossible to give a generic answer.

Similar Messages

  • Setup a template document in a SharePoint document library

    I created a template for a document library in SharePoint Online.  I configure it so when the user needs to open a new document the template opens.   It works if you go to Files\New Document, but if you click on the New Document link
    in the document library when you select word the default template opens.  How can I get the new document link in the document library to open the template document that I created?
    Thanks
    Judy

    Its simple.. Go to the document library template which you have created. Then go to its library settings. Then go to advanced settings and select allow management of content type to yes. Then try to click ok and scroll down to find the option add from
    existing site content types and then add your template which you have created and click ok. Once you have done that you will be able to see the option of that template when you click new. If you still don't get it then you can open a service ticket from the
    sharepoint portal and post your ticket number here and I will try to reach you as soon as I can to take care of the issue from there. If you find this information useful, then propose this as an answer and vote. Thanks.

  • Error when select posting level in document type

    Hi,
    Did anyone have an experience to face the Abab run time error when select "posting level" in document type?
    The Error is : GETWA_NOT_ASSIGNED
    Short text
    Field symbol has not yet been assigned.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_UC_ITKEY_FACTORY===========CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.

    If you searched the notes, as Dan proposed (and didn't find anything relevant), and the answer to the Greg's question is positive, then I would suggest regeneration data basis and ConsArea due to data model inconsistency.
    If it doesn't not help - open customer message to SAP.
    Edited by: Eugene Khusainov on Jan 26, 2010 10:26 AM

  • How do I add extra pages to template documents in the new version of pages which carry over the same formatting, borders etc?

    Hi,
    Does anyone know how how to add extra pages to template documents in the new version of Pages which carry over the same formatting, borders, styles etc? In iWorks09, all styles, borders etc just used to carry over to the next page. In the new Pages, this doesn't seem to happen. Unless I'm missing something.
    Any help would be appreciated.

    Everything is a matter of degree! (Speaking for myself).
    Review and rate Pages 5 in the App Store and if you are interested check out all the changes here:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
    Peter

  • Urgent - How to add pdf files to template document in multiple sessions?

    Hi, forum!
    VERY new to using Adobe Acrobat 7.0 Professional, so I am reaching out for help.
    We have a "template" document with pre-assigned bookmarks.  I need to add multiple PDF files into it, either by inserting pages, adding the complete PDF, and/or extracting pages, then assigning the locations to each individual bookmark.
    The ending page count will be about 300 pages, and there is no way that I can create the complete document in one day or one session.
    A) What is the best way to add pages from multiple PDF files into this "template" document?
    B)  Is there a way to add pages in one session, save it out, then add additional pages to the same output document on a different day, etc., without having to "re-add" the previous pages and until I am done and ready to finalize the document?
    I would really appreciate a fast response, as my new job kind of depends upon me doing this well...
    Thanks and Merry Christmas!

    Thanks, George!
    I will try your suggestion.
    While waiting for a response, I ran into another problem:
    Some of the PDF documents I am to work from are "protected," meaning I can read them but not extract any pages or click to add them to a list of files to import...but I need to extract some or all pages from it.  Any suggestions on this?
    Thanks!

  • Date Range Selection in Query Templates

    Hi,
    Can someone please tell me how to use <b>Date Range Selection</b> Tab details in SQL Query and TAG Query (Using Examples).
    Thanks in advance
    Muzammil P.T

    >>>>>>>>>>
    Re: Date Range Selection in Query Templates   
    Posted: Feb 15, 2007 6:43 AM    in response to: Muzammil Ahamed       Reply      E-mail this post 
    Hi Muzammil,
    In data range section you can have multiple options like setting start datetime and end datetime.. And you can set the shift (or) time period and also the format of the time periods.
    Primarily we use the start date and end date querying to fetch data between two time labels. I can explain this one with example..
    You have batch production table with columns Production Time, Batch Id, Production Qty. Then you want all the details between the 02/02/2007 to 05/02/2007.
    Solution :
    1.Map 02/02/2007 with Start date.
    2.Map 05/02/2007 with end dare.
    Now these two become the variables [SD] and [ED].
    Now you have mentioned the date range, but you need to mention for which column these things to be applied. For that
    3.In Query tab enter Production Time column name in Date column at the bottom.
    Now you have written query like Select * from batch prodcution where production time > 02/02/2007 and production time < 05/02/2007.
    4. Even those values you mapped (SD and ED) you can change from the front page through Java script.
    Like wise you have so many other advantages also.
    If you have any other specific doubt let me know.
    Thanks,
    Rajesh.
    PS : Please ward points if answer is useful. <<<<<<<<
    Message was edited by:
            David Dreyer

  • Error in Printer Selection while print the document

    Dear All,
    Error in Printer Selection,  while print the document in Quotation.
    Also both side Printing is not happening.
    My Report is in Crystal Report format.
    Suggest any solution on this as earlier as possible.
    Regards,
    Sumeet Vaity

    hi,
    are you printing locally or shared printer?
    pls check the ff.
    1. make sure your printer is on and Online (For local and shared)
    2. make sure the host PC is connected in the network., ping the host PC to make sure your host PC is Connected (Shared)
    3. make it as your default printer.
    regards,
    Fidel

  • How do I select to print a document without margins?

    How do I select to print a document without margins?

    fieldhockey,
    The printer driver is the software that drives the printer.
    You can File>Print Setup, then select the printer (driver) by its name in the dropdown list. Note that there may be different drivers for one and the same printer (such as PostScript and non PostScript, borderless and non borderless).
    Choosing a borderless printer (driver) the printable area should be identical to the Artboard (with no dotted line inside to show the boundary between printable area and paper edge).

  • The problem is that I select as a pdf document does not open completely but leaves the mail. Also I can not open more even Ibook other documents already saved

    the problem is that I select as a pdf document does not open completely but leaves the mail. Also I can not open more even Ibook other documents already saved

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • Error message when checking WWI report template document in CG42.

    Hi Gurus.
    I'm facing troubles to check MSDS report template document  after upgrading the version 4.7 to ECC 6.0. When I try to Check the template I receive many msgs warnings like shown below:
    For Example One type of template warninfg from report document:
    Template Texts: (From the  UNDERLINED LINE i am getting the warnings)
    <01G1023001RP(C;1)>:<01G1023001RP(P;1)>:
    <13BNG034(+0101G1023001RP(C;2-),01G1023001RP(P;2-)>
    <11BRG023(D;2-*)>
    <01G1023001RP(C;2-)>:<01G1023001RP(P;2-)>:
    <11ERG023>
    WARNINGS from above template symbols:
    Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
    Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
    *Similar type of other warnings:*
    Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
    Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
    Symbol ZSUPNAM1: Range to be overwritten by that of discrete repeating group
    Symbol ZSUPNAM2: Range to be overwritten by that of discrete repeating group
    Symbol ZSUPSTR: Range to be overwritten by that of discrete repeating group
    Symbol ZSUPCTY: Range to be overwritten by that of discrete repeating group
    I realy don't know what is going on. Before in SAP 4.7 version When i check the template document i didnt receive any warnings like i listed above but i am receiving now. For your reference I am using the same WWI report template in ECC 6.0 also.
    Can anyone help me?
    Thanks in advance.
    Edited by: sunil29 on Aug 1, 2011 3:26 PM

    See note 920317.  That warning won't affect the result based on this example.  You are using (2-*) on both the Discrete repeating group and the symbol itself.  In your new system, the area you use discrete repeating group overrides the area on the symbol.  The note gives some examples.

  • Cannot select different print template without closing and restarting Lightroom 4

    If I select an image in the library grid and then open the print module then I can select any of the templates eg 2x2 cells or (1) 8x10 as normal.  However, once I've selected that template, if I decide to see what any other template might look like then although the small preview window at the top left previews the cell layout of each different template, the main viewing window does not update.  The only way I am able to change the template is by closing Lightroom, restarting and once again selecting a different template - which I then cannot change without closing Lightroom and restarting. Very frustrating.  I am using an iMac with Lion 10.7.3 and 12 gb RAM - everything else is working fine.  The issue sounds similar to that reported on the beta on http://forums.adobe.com/message/4200783 where a reinstall seems to have helped.  I have done a fresh download and re-install of LR4 but this makes no difference. 
    Can anyone help please?

    Hi Jeff
    Thanks for responding.  When the layout window does not operate then the layout styles sliders will still work and these will update the layout window.  Late last night I found a post on
      http://feedback.photoshop.com/photoshop_family/topics/lighroom_4_edit_in_print_presets_not _working_properly
    which suggests that the problem lies with the imported LR3 user templates and that I should delete all of those, (of which I have many), and re-create them.  In investigating this suggestion I have learned that once the layout window has frozen, it does not matter whether I try and select a Lightroom template or a user template, the screen remains frozen - I think that helps with your second question.  Even closing and restarting Lightroom generally leaves the layout window frozen.
    Thanks

  • HT5824 Can I use only one (selected) folder from my documents in iCloud?

    Can I use only one (selected) folder from my documents in iCloud for MAC and PC?

    If the folders were created in the Photos app on the iPad, they don't really contain copies of the photos. They contain pointers to those photos that allow them to appear in the albums that you create. Consequently, they cannot be imported to the computer. Those albums are for local organization on the iPad only And cannot be imported.
    You should be able to select the indicidual phots that you want to import, as far as I know. I can do it on a Mac using iPhoto or Image Capture, so I assume that Windows will allow you to pick and choose which photos you want to import.
    Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

  • I keep losing my Selection arrow functionalities on documents I've converted from CS2 to CS6. I reinstall preferences and it works for a few minutes but all is lost again. What to do?

    I keep losing my Selection arrow functionalities on documents I've converted from CS2 to CS6. I reinstall preferences and it works for a few minutes but all is lost again. What to do?

    What OS?
    Id you still have CS2 installed someplace, export the original files as .inx (InDesign Interchange) and convert that instead of the .indd.

  • Can't select placeholder image in template

    Hello there,
    perhaps I'm too stupid and the solution is such easy. But today I wanted to use the template "You're invisited" to style an invitation for a friends birthday party. In iWork '06, I could select the images on the left side on page 1 and 2 to insert an own image. Now, in iWork '08 it seems to be a text box including image and text - I can't select the image only. Consulting the manual did not solve this, so I'm looking here for help. Thanks a lot in advance
    Klaus

    I can't duplicate the problem you're having. When I open that "festive invitation" template in Pages 3 I can select either the picture or the text box, they are not grouped or otherwise linked. The picture is a "media" placeholder, same thing as image placeholder in Pages 1 & 2. This one does have a mask applied, but none of that prevented me from inserting a picture of my own choosing.

  • How to apply a Character Style that's already been made in a template document?

    First of all I'd like to thank everyone that helps. I'm a complete beginner at scripting and appreciate all your help.
    I'm basically using GREP expressions to find patterns in a document and apply a Character Style which has already been made. This Character style was not made using script, but just in InDesign when making and setting up the template.
    var myDoc = app.activeDocument;
    //Clear the find/change grep preferences.
    app.findGrepPreferences = NothingEnum.nothing;
    app.changeGrepPreferences = NothingEnum.nothing;
    //Set the find options.
    app.findChangeGrepOptions.includeFootnotes = false;
    app.findChangeGrepOptions.includeHiddenLayers = false;
    app.findChangeGrepOptions.includeLockedLayersForFind = false;
    app.findChangeGrepOptions.includeLockedStoriesForFind = false;
    app.findChangeGrepOptions.includeMasterPages = false;
    //GREP Expression for finding all HEADERS
    app.findGrepPreferences.findWhat = ".+\n";
    //Applying formatting changes to put into All Caps, Bold and changing the font size to 12 pt.
    app.changeGrepPreferences.capitalization = Capitalization.allCaps;
    app.changeGrepPreferences.fontStyle = "Bold";
    app.changeGrepPreferences.pointSize = "12";
    myDoc.changeGrep();
    //Clear the find/change preferences after the search.
    app.findGrepPreferences = NothingEnum.nothing;
    app.changeGrepPreferences = NothingEnum.nothing;
    This is how I currently have it. I will manually define the changes to the text. The problem is, each template uses a different set of fonts and not all of them use Bold e.g. Sabon can use CE Bold.
    I would like to learn how to apply a Character Style and have tried looking around but nothing seems to work.
    Any help would be much appreciated.
    Thanks.

    select the text where u went  and run below  script after change group as per ur template.
    var myDoc = app.activeDocument;
    var mySel = app.selection[0];
    //Clear the find/change grep preferences.
    app.findGrepPreferences = NothingEnum.nothing;
    app.changeGrepPreferences = NothingEnum.nothing;
    //Set the find options.
    app.findChangeGrepOptions.includeFootnotes = false;
    app.findChangeGrepOptions.includeHiddenLayers = false;
    app.findChangeGrepOptions.includeLockedLayersForFind = false;
    app.findChangeGrepOptions.includeLockedStoriesForFind = false;
    app.findChangeGrepOptions.includeMasterPages = false;
    //GREP Expression for finding all HEADERS
    app.findGrepPreferences.findWhat = "role";
    //Applying formatting changes to put into All Caps, Bold and changing the font size to 12 pt.
    //app.changeGrepPreferences.capitalization = Capitalization.allCaps;
    //~ app.changeGrepPreferences.fontStyle = "Bold";
    //~ app.changeGrepPreferences.pointSize = "12";
    app.changeGrepPreferences.appliedCharacterStyle=myDoc.characterStyleGroups.item("Style Group 1").characterStyleGroups.item("Style Group 2").characterStyles.item("Header")// Header is name of character name
    mySel.changeGrep();
    //Clear the find/change preferences after the search.
    app.findGrepPreferences = NothingEnum.nothing;
    app.changeGrepPreferences = NothingEnum.nothing;
    If it's help then click yes
    Mi_D

Maybe you are looking for