Cannot select different print template without closing and restarting Lightroom 4
If I select an image in the library grid and then open the print module then I can select any of the templates eg 2x2 cells or (1) 8x10 as normal. However, once I've selected that template, if I decide to see what any other template might look like then although the small preview window at the top left previews the cell layout of each different template, the main viewing window does not update. The only way I am able to change the template is by closing Lightroom, restarting and once again selecting a different template - which I then cannot change without closing Lightroom and restarting. Very frustrating. I am using an iMac with Lion 10.7.3 and 12 gb RAM - everything else is working fine. The issue sounds similar to that reported on the beta on http://forums.adobe.com/message/4200783 where a reinstall seems to have helped. I have done a fresh download and re-install of LR4 but this makes no difference.
Can anyone help please?
Hi Jeff
Thanks for responding. When the layout window does not operate then the layout styles sliders will still work and these will update the layout window. Late last night I found a post on
http://feedback.photoshop.com/photoshop_family/topics/lighroom_4_edit_in_print_presets_not _working_properly
which suggests that the problem lies with the imported LR3 user templates and that I should delete all of those, (of which I have many), and re-create them. In investigating this suggestion I have learned that once the layout window has frozen, it does not matter whether I try and select a Lightroom template or a user template, the screen remains frozen - I think that helps with your second question. Even closing and restarting Lightroom generally leaves the layout window frozen.
Thanks
Similar Messages
-
How to make Random questions work without closing and restarting?
I have a quiz using random question slides and random pools.
The random slides display random questions when I run the CP4 file, let it close then relaunch it. I'm using an LMS.
I would like to be able to repeat the quiz again without closing and relaunching, but my method does not work.
I tried using a button (retake) on the last slide to 'jump to' slide 1 when clicked. The quiz does repeat, but show the exact same questions.
I thought there might be a variable that would reset the quiz, but could not find one.
Does anyone have method to do this?
Thanks,
DaveI don't know of a way. My experience is the same as yours. The quiz questions are selected and shuffled when the lesson is launched. When 'retake' is clicked, the quiz repearts the same questions. The only way to get a new set of questions is to close and relaunch it.
I suppose there's be some function to invoke or array to manipulate via AS, but I've no idea what that may be...
So no help here, just backing what you're seeing.
Erik -
CD won't work without closing and relaunching itunes
I've found that cannot rip CDs without closing itunes, loading the CD, and closing the CD player. Once that happens, itunes will launch and the CD information will come up and I can rip the CD. If I load the CD without closing and relaunching itunes, the CD player will run, but itunes will never recognize it. I can see the CD is in the player if I look in My Computer and Windows Media will play it, but not itunes. When I'm ripping an audio book with 20-some CDs, going through this process for every disc gets to be painful and annoying. Any advice or help is greatly appreciated. (Diagnostics indicate that the CD player is functioning correctly.)
OK. I'm signing up on there now and will let you know once I have my stuff there. In the meantime, you think you could go through the following article and see if anything's missing - http://www.inside-oracle-apex.com/oracle-apex-4-0-cascading-lovsselect-lists/? I've followed that article to implement my stuff. I was having the same issue with my Apex 3.1 application. It wasn't working with the Select List option. I had to choose the Select List with Submit option. That's the main reason I decided to get to the latest version so that I get it done with Select List.
Thanks -
I will try to print from word to the Adobe printer. Sometimes it just freezes. I cannot select another printer. It’s like all my printers are gone. Sometimes I get an “Unable to Connect” error and sometimes I get “1 document in printer queue”. No matter what printer I choose after I try to go to Adobe, I cannot connect to a printer. The only solution I have come up with is a clean reboot which I can't afford to do 4-5 times a day.
Currently on Acrobat XI Pro 11.0.09Hi Tymuls,
The first step I would try is delete the Adobe pdf printer and then repair Acrobat.
Repairing Acrobat will bring back the pdf printer. We released an update yesterday i.e. 11.0.10. try updating to the latest version and check.
Have you tried uninstalling the software and reinstalling it.
You might also want to check the performance in a new admin user account.
Regards,
Rave -
My computer as failed to start twice without unplugging and restarting. What is the issue here and do I need to address it. My mac is approximately five years old and I recently added Snow Leopard. Love computer and don't want to change
I recently had a PC which had similar issues. When it was cold, it took couple attemps for it boot and after that it worked without any problems. Problem was capacitors, when they fail or are near total failure they might still work when they warm little bit (same thing sometimes applies to solder connections under chipsas they expand in heat and might form connection again) and this was the case with that PC. After replacing them all was back to normal.
I would check capacitors. -
I can print an entire e-mail when I log into Hotmail using Firefox, but if I select part of the e-mail and tell the printer to print the selected part, all I get is a blank page coming from the printer.
I can print the selected text if I use Internet Exlporer as a browser to log into Hotmail.Hi,
My dad told me he had this 'no selection' problem when he wanted to print out a selection in Hotmail, so I had a hunt around, but didn't find a definitive solution.
So, I have done some playing around, and have come up with this solution which works if you want to print out a selection in Hotmail (using firefox), but it is now greyed out.
It seems to be connected with the way that Hotmail handles frames.
(Thought I would post it as posts like this have helped me a ton in the past :0))
'''To print a selection in hotmail you need to do this.'''
1/ On the email you want to print click the small Printer icon in the hotmail menu.
There is no need to highlight a selection at this stage because the email is in a frame, so it will do no good anyway.
2/ A new page will open up and the printer dialog box will open up.
Close the printer dialog box.
3/ Highlight the text selection that you want to print on that page.
4/ Press Ctrl-P on the keyboard.
5/ The printer dialog box will now pop up again and you will be able to choose 'Selection'
Your selection will now print. -
HP Officejet Pro 8600 - Cannot select color printing in settings
I selected grayscale printing. Now I want to print in color and cannot find how to print in color. Option not found.
Here's an answer - it might not match your setup though:
OS: Windows 8.1
Print Driver: HP Officejet Pro Full Feature Software and Driver, 2012-10-22 , Version28.8
Bring up the HP Officejet Pro 8600 software and select Set Preferences under Print:
Then on the Printing Prefrences dialog, press the Advanced button:
And then on the Advanced Options dialog, turn off the option under Printer Features for Print in Grayscale:
Hopefully that helps.
-Seth -
Printing emails without headers and footers
I just purchased a new printer HP Deskjet 2510 series and use it with Microsoft XP. Have also used HP color lazer CP2025 and HP lazer P2055DN.
I am trying to figure out how to print emails without the header and footer showing. I have been able to do it with other printing jobs for example when printing a copy of PDF, but it does not work for emails. Can this be done for emails as well?Hello,
You can print any section you want on the email. You will need to highlight the section you want printed, press down Ctrl+P, and then select print using system dialog, which will look like this:
Then select the option that says "selection", and then select print. -
Cannot select different values from a table in a view object
Hi everyone,
I have two tables, Employee : ID, NAME, SALARY, NO_ROLE and role : ROLE_ID, ROLE_EMP. I join them with NO_ROLE and ROLE_ID. I created a view object with these two tables in JDeveloper, I made a LOV with ROLE_EMP and I want to be ale to create an employee with his ID, NAME, SALARY and by choosing a value in the ROLE_EMP list. The problem is that when I choose a ROLE_EMP, I cannot commit because the link between ROLE_EMP and ROLE_ID is not made correctly in ADF.
In SQL, that's what I'm trying to do: INSERT INTO Employee VALUES (ID, NAME, SALARY, NO_ROLE) WHERE NO_ROLE = ROLE_ID of the ROLE_EMP I have selected.
Thanks for your help ;)
PS: I followed this tutorial to do this, but it is not exactly what I want to do: http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_55/jdtut_11r2_55_2.htmlTo be more generic, when I create an employee and select his role_emp (the name of the role) I want that the role_id of the role_emp to commit.
-
Firefox is up to date but is unresponsive even after closing and restarting. How can I recover?
Firefox is totally unresponsive. I cannot select any of the several open tabs. I can open a new tab from an email link only. I have restarted Firefox and my MacBook Pro and all previously open windows appear in tabs but are inoperative.
Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile -
Once I open a book in my library there is no option to close it and return to the library. I must leave the app, stop the app and then restart it. How do I exit an opened book to return to my library without having to exit, stop, and restart the app?
Assuming you are talking about "iBooks", then just
tap the center of the screen
and you should see a "Library" in the upper left corner of the screen.
tap the center of the screen again,
and you should return to full screen mode.
if this is NOT iBooks, then I do not know what controls that app -
HP Officejet Pro 8500A fails to print until powered down and restarted.
This problem has arisen after about a year of giving good service. Although it says "Now Printing," it does not print until powered down or disconnected and restarted or reconnected for each print job. I will be most grateful for any suggestions for fixing this.
Hi @jmuravchik
Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
Also, running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Safari 5.1 will not change my privacy settings without quitting and restarting the browser.
I have installed Safari 5.1. When I attempt to change the block cookies setting in the privacy preferences, the browser will not change the settings until I quit and restart the browser.
Quit Safari. Open a Finder window. Select your Home folder in the Sidebar on the left.
Open the Library folder then the Cookies folder.
Move the Cookies.plist file from the Cookies folder to the Trash.
Restart your Mac.
If that didn't help, quit Safari. Open a Finder window select your Home folder in the Sidebar on the left. Then open the Library folder, then the Caches folder, then the com.apple.Safari folder. Move the cache.db file from the com.apple.Safari folder to the Trash. Relaunch Safari. -
Different between Reboot Role Instance and Restart role
Can anybody tell the different between
Reboot Role Instance
http://msdn.microsoft.com/library/azure/gg441298.aspx
and
Restart Role
http://msdn.microsoft.com/library/azure/jj157197.aspx
are they redundant?
Even one is put under virtual machine operations, but virtual machine is also a role instance in a cloud service anyway.When you reboot a role instance, the instance is taken offline, the underlying operating system is restarted for that instance, and the instance is brought back online. Any data that is written to the local disk is persisted across reboots. Any data that is
in-memory is lost.
Ref - http://msdn.microsoft.com/en-us/library/azure/gg441298.aspx
In particular to cloud services, - customizations done on the role instances e.g. manually installed software, deployed files (either through RDP or through web deploy) will be lost and the instance will be brought back to the initial state.
Bhushan | Blog |
LinkedIn | Twitter -
Selecting Different Printer With Apple Script.
Hi,
I am currently in the process of making a script to be able to print off labels without the need of much user input (read from a document or e-mail) and I want to be able to set the printer when it goes to the print screen.
this is the final apple script step in the application cmd+p brings up the 1st print menu the return takes it to the second print menu cmd+v pastes predifind by the user the ammount of copys they want
on run {input, parameters}
tell application "Labels & Addresses"
activate
tell application "System Events"
keystroke "p" using command down
delay 1
keystroke return
delay 1
keystroke "v" using command down
delay 1
tell application "System Events"
tell process "Labels & Addresses"
click (menu item whose description is "Printer")
click (menu item "Zebra Technologies ZTC GK420t" whose description is "Printer")
end tell
end tell
return input
end tell
end tell
end run
now there is chance to change the printer selection twice once in the 1st print screen and once in the 2nd print screen the only problem is im not sure how to apple script to select the right printer from the drop down menu, I got the code from a forum but I think it was old code as when I tested it it was returning errors so I modified it a bit and now it just struggles finding the menu item with description of printer.
Does anyone know what I would have to use for it to select the right printer? (The Zebra Technologies ZTC GK420t)
Help would be greatly appricited!
Thanks,
Bruce
P.S. sorry the code is a bit messy!Im NOT sure if you have just made this a little over complicated… This works just fine for me. Tested with about a dozen psd layers…
tell application "Adobe InDesign CS2"
tell active document
tell rectangle 1
tell graphic 1
tell graphic layer options
set GLC to count of graphic layers
repeat with i from 1 to GLC
if name of graphic layer i ≠ "Blue" then
set current visibility of graphic layer i to false
else
set current visibility of graphic layer i to true
end if
end repeat
end tell
end tell
end tell
end tell
end tell
This variant also works as I would have expected too… Retaining visibility from a list…
tell application "Adobe InDesign CS2"
tell active document
tell rectangle 1
tell graphic 1
tell graphic layer options
set On_List to {"Red", "Aqua", "Orange"}
set GLC to count of graphic layers
repeat with i from 1 to GLC
if name of graphic layer i is not in On_List then
set current visibility of graphic layer i to false
else
set current visibility of graphic layer i to true
end if
end repeat
end tell
end tell
end tell
end tell
end tell
Maybe you are looking for
-
Why did my ipod touch 3.1.3 shutdown & will not come back on, though it's been on charger for days.
-
Leap year without date objects
I need to check to see how many leap years are between two user-inputted years and I can't use date objects. I figure I need to start with a for loop, but I get lost when to by the mod 4, mod 100, or mod 400. Any help? for(int l=cYear; l <= eYear; l+
-
Why does OWB 9.2 generate UK's on higher levels of a dimension?
When you specify levels in a dimension, OWB 9.2 generates unique key constraints in the table properties for every level, but only the UK on the lowest level is visible in the configuration properties. Why then are these higher level UK's generated?
-
HT204266 I purchased an app and found out it cannot be used, how do I get refund and remove that app
I purchase a 7notes and found out it is Japanese version which I can not use. How can I cancel it?
-
For 3 rd pary service provider - what material type could be used??
I am a third pary service provider warehouse. I receive materials from different customers in loose units . After receiving i palletize the material the material. Since i do not have any idea what materials i receive i am planning to use material typ