Selection for infoobject with TEXT

Hi All,
I have an infoobject ZCustomer which is having a navigational attribute 'ZROLE' which may have concatenated text value. eg., LOC_INT or INT or LOC_PIC.
Now i have to keep selection/filter to the report where user should have a selection option/drop down with values 'LOC', 'INT' and 'PIC'. If the user select the value 'INT' then i should show the report for only 'LOC_INT' and 'INT'.
To say shortly its like contains pattern in the abap.
so for the above user selection, which ever the customer's attribute value has the string INT only should be dispalyed in the report.
Note: I can use WAD reports if needed. The list of values 'LOC', 'INT' and 'PIC' can be the static list we maintatin for the user to select. bcoz i dont have any particular infoobject with these values.
Thanks in advance
Karthik

Hi Karthik,
You can use the standard selection option variable and ask the users to enter the wild character before and after the input value.
For example, if the user enters 'INT' , then report output would show all values which has 'INT'.
However, the users would be seeing all the values in the master data or posted values in the transaction data ( as per the setting ) and not customised values as per your requirement.
Thanks,
Krishnan R.

Similar Messages

Query variable for InfoObject with texts

Hello experts,
In the BW I have an InfoObject of type NUMC 19 that stores tasks master data and does have texts, we assume that the InfoObject is called Z_TASK. The texts represent the multi lingual task names. I need to build up a query that filters on the task names, e.g. all tasks between A* and C*.
When I use a variable in the query, the variable takes the key field values (NUMC values of the InfoObject Z_TASK).
My questions are:
1. Is there a possibility to solve this problem using query variables?
2. Other solutions?
Thanks in advance.
Marco

Hi Marco,
one possibility would be to create a ods object and post the master data to that ods. Include the text (description) into the datafields of the ods. Enable BEX reporting for the ods. Create a Query on it with a variable selection on the text. Now go back to your other query and create a variable for your task infoobject. Use the prequery on the ods as replacement path for z_task. That should do the job.
kind regards
Siggi

InfoObject with texts problem

System: SAP BW DEV;
Problem: I wanted to make some changes with InfoProvider 0PROD_HIER___T, which is an InfoObject with texts. Finally, 0PROD_HIER___T disappeared, I don't see it in the treelist of InfoProviders (I actually don't think, I could delete it...). In the InfoPackage tab "Data Targets" I still can see data target name 0PROD_HIER___T. I want to bring it back to InfoProviders' list without any damage of system . Or maybe it's already deleted?
any minds for next steps? thnx

Info object change mode ,master data/text tab , assign some Application component . then It will show in the info provider list .
Ravi

SELECT FOR UPDATE with the SKIP LOCK clause

Hi,
I have a query regarding the SELECT FOR UPDATE with the SKIP LOCK clause.
Whether this will be really good for parallel processing.
Also if we are selecting a set of records in a cursor whether the lock will be done at the records level once we fetch the records?
Also do we have any known issues with this one?
We are trying to figure out whether this will fit for business requirement, we are trying to do a implement a threading kind of thing for our stored procedure invocation in background using shell script.
Any suggestion or feedback on this will be helpful for us.
Thanks a lot for the support given....
Regards,
Basil Abraham.

http://www.oracle.com/technology/oramag/oracle/08-mar/o28plsql.html
Please read the above thread for few information...Thanks!

Is the component uiscrollbar for use with text fields only

Is the component uiscrollbar for use with text fields only?

Yeah, it isn't in the library, you need to call it up using code. It is documented in the help files though, so that should help you get it into use.

"InfoObject" with Text data is not showing description/heading/text in IDT...

Dear All,
I'm working on SAP NetWeaver 7.3 and I have an InfoCube for QM and recently I had a requirement to add an "InfoObject" which will show text. I added it into InfoCube and after loading my transaction data, I could see the text of newly added InfoObject as well on "LISTCUBE" transaction. I refreshed the "Data Foundation Layer" on BO tool "Information Design Tool" and also inserted Candidate InfoObject (my newly added InfoObject"). But when I tried to show its values for "InfoObject" its showed me its values. But when I tried to show its text (heading) it threw following error:
1. Firstly, I could not find Text Table or table for the newly InfoObject into "Data Foundation Layer" why?
2. Why am I getting able error?
3. Have I missed some step in BW which is causing an issue for not "Generating SID" for this InfoObject "Master Data Text"?
4. How to resolve the above issue as I want to show its text into "InfoSpace" or BusinessObject Explorer?
Many thanks!!!
Tariq Ashraf

Problem with JMS IKM of 10.1.3.5 for Hp-UX.
Step 3 of IKM, where its truncating the schema, the systntax is wrong. The correct syntax will be.
truncate schema < %=odiRef.getInfo("SRC_SCHEMA")%>

Issues in making label selectable when used with text area

I have used the following code (which was given in the thread : Re: Making Labels and other controls with text selectable for copy&paste ]
which shows how to make label selectable with text field. )
public class TrialArea extends Application {
>>public void start(final Stage stage) throws Exception {
>>StackPane layout = new StackPane();
>>layout.setStyle("-fx-background-color: cornsilk; -fx-padding:10; -fx-font-size: 20");
>>
>>Label label1 = (new Label("jqhrjhhhhhhdsfdsfdsfdfdsdsfsdfdsdsdsfsddsdsdfsdfsddsfsfsddsfdsdedsfssdfhhhhhhhhhhhhhhhhhhhhkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\njqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\njqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\njqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n jqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n jqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n jqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n "));
>>
>>label1.setWrapText(true);
>> label1.setPrefWidth(480);
>>label1.setMaxWidth(480);
>>layout.getChildren().add(
makeSelectable(label1)
);>> Scene scene = new Scene(layout);
>>stage.setScene(scene);
stage.show();
/** @return the passed in label made selectable. */
private Label makeSelectable(Label label) {
StackPane textStack = new StackPane();
TextArea textField = new TextArea(label.getText());>>
>> textField.setEditable(false);
textField.setWrapText(true);
textField.setStyle(
" -fx-background-color: transparent; -fx-background-insets: 0; -fx-background-radius: 0;"
);>>
>>
// the invisible label is a hack to get the textField to size like a label.
Label invisibleLabel = new Label();
invisibleLabel.textProperty().bind(label.textProperty());
invisibleLabel.setVisible(false);
>> textStack.getChildren().addAll(invisibleLabel, textField);
label.textProperty().bindBidirectional(textField.textProperty());
label.setGraphic(textStack);
label.setContentDisplay(ContentDisplay.GRAPHIC_ONLY);
return label;
public static void main(String[] args) {>> Application.launch(args);
>> }
}The issue I am facing is that with text area, the scroll bar is visible, which does not go with label. The label is being selected properly, but how to remove the scroll bar?
Edited by: Amrita Dasgupta on Mar 11, 2012 11:38 PM

DVD SP is not Flash or Director and it sounds like you using "hotpots" are thinking more along those lines. If someone puts the DVD in a DVD Player they may get rather frustrated having buttons that do not do anything and the navgation is strange
Also take a look here for some more pitfalls and why another app may be better for you
http://discussions.apple.com/thread.jspa?messageID=1085629

Selection for (InfoObject only date) cannot be uniquely assigned in RRI

Hello,
I have created RRI using 6 queryies. When i do jump from sender to receiver, i found the warning messages for two date fields saying that Selection for ZORAPLIC cannot be uniquely assigned and Selection for ZOR_CREAT cannot be uniquely assigned. ZORAPLIC & ZOR_CREAT are two date fields. I have supressed all messages in RSRT also.
Please help me on this.
Thanks,
Ashok

I do have a user exit to fill in a text variable and even though we modified the ABAP code for it, it still doesn't work
But if you tell me that the "Selection for [variable] cannot be uniquely assigned" problem comes from the user exit problem, we'll try to fix this one first.
Thanks again

How to SELECT FOR UPDATE with CMP (Oracle)

The most common database (Oracle) by default uses a scheme that does not fit into any of those isolation levels. A SELECT statement selects data at the start of the transactions, whereas a SELECT ... FOR UPDATE does something quite different. It is essential to do SELECT FOR UPDATEs before updating the row as SELECT does no lock. It's a hack that works well in practice.
1. Which isolation level is this?
2. More fundamentally, how an earth is it possible to use this scheme with CMP?! You would have to distinguish load() from loadForUpdate()! Is CMP inconsistent with Oracle?
This is a pretty big whole in the CMP spec!

No. thats no goes well.
Transaction serializable in Oracle uses a optimistic
concurrency system. And for update is a
pessimistic concurrency.
With optimistic: the system is faster but it can fail
With pessimistic: if doesnt fail (usually;)
You can solve the proble with many differents systems:
1. Edit the .xml descriptor files ans change the sql sentences.
And my prefer one.
2. Make a new jdbc driver that inherits from the original
oracledriver.
The new driver give u in "getConnection()" a new connection class that inherits from the original connection.
The executestatement and preparestatement adds the
string "for update" if the stattement was starting by select.
Configure your container to use the new driver.

Selecting for use with slide tool

Got FCE on Friday and decided to work through the manual (in the apparent absence of any video tutorials), got to the section about using the slide tool and am starting to scratch my head.
Can use the slide tool to grab and slide clips but am now trying to do so using numerical edits. The manual (page 486) says:
+If you need to slide a clip just two or three frames, using the mouse may be difficult. For precision edits, it is much less cumbersome to slide a clip numerically.To slide a clip in the Timeline using timecode:+
+1Select the Slide tool in the Tool palette (or press the S key twice).+
+2Select a clip in the Timeline, or hold down the Shift key to select multiple clips. You can also select noncontiguous clips using the Command key.+
I'm actually struggling to select a clip, if I click on a clip with the slide tool it's momentarily highlighted with a coloured outline but when I let go it doesn't stay selected, I can shift click on the clip and it will get selected but the timecode doesn't appear at the top of the time line window.
I feel a bit daft asking this, but after 20 minutes trying all sorts of things I'd rather look daft than waste anymore time. Anyone know what I'm doing wrong.

OK forget it, got it, sorry about that.

XSL Stylesheet for Form with TEXT AREA not responding to DATASRC or DATAFLD

I have a stylesheet for Form which displays data in the input boxes for edit and re submit.
While all input text boxes show data from the database, TextArea box does not display the value for edit
<div align="left">
<table border="0" cellpadding="0" cellspacing="0"
width="600">
<tr>
<td width="600" height="1">
<font face="Arial" size="2">17. Describe how
the accident or exposure
happened</font>
<textarea rows="3"
name="P_ACCD_TXT"
datafld="{ACCD_TXT}"
onblur="javascript:while(''+this.value.charAt(0)==' ')this.value=this.value.substring(1,this.value.length);"
cols="72">
</textarea>
</td>
</tr>
</table>
</div>
In other input boxes value="{column_name}" works, but value attribute is not available for textarea. both datasrc="{ACCD_TXT}" and datafld="{ACCD_TXT}" do not work.
Is it because datsrc and datafld are not supported. Would very much appreciate if some one can clarify on tthis and advise how to go about retreiving data into textarea box
Thanks

datasrc and datafld are Microsoft IE specific "data binding" attributes that are supported in the MS IE5 implementation of HTML.
What you likely want is just the standard HTML way of putting data into a <textarea> that you would do in XSLT like this:
<textarea>
<xsl:value-of select="ACCD_TXT"/>
</textarea>assuming that the current node has a child element named <ACCD_TXT> in the source document.

Does iOS 5 support the Bluetooth Message Access Profile (MAP) for interacting with text messages in Ford Sync?

I'd sure love to take advantage of Ford Sync's ability to read aloud and let me interact with bluetooth text messages by voice. I had heard rumours that iOS 5 was going to support the Bluetooth Message Access Profile (MAP) like other phone manufacturers, but in my latest update I received while testing and reading other non-Apple sites, that appears not to be the case.
Is this something I'd have to upgrade to the iPhone 4S to otherwise get?
It's not Siri I'm interested in, just this particular feature to allow the phone to interact with my vehicle. If there's a 3rd party app out there that helps I'm open to that idea too. Thinking about what my next smart phone's going to be with LTE, and this is weighing in on my decision, lots of enterprise users out there with Ford as their company fleet vehicle too (hint hint!). A nice way to save lives too for those who refuse to not read/reply to texts while driving (I'm not in that club, but many are).
Kind Regards,
Brian

For the public record, here's the feedback I submitted based on Allan's suggestion. Thank you both, guess I'll just cross my fingers and hope others share their feedback in a positive way to Apple too.
I'd sure love to take advantage of Ford Sync's ability to read aloud and let me interact with bluetooth text messages by voice. However it requires phones to support the Bluetooth Message Access Profile (MAP) like Android and other phone manufacturers.
Humbly requesting this is something that gets added to a future iOS update.
It's not Siri I'm interested in, just this particular feature to allow the phone to interact with my vehicle by using the vehicles embedded voice and heads-up display commands.
Advantages:
(1) Gives one less reason for Apple people to stray to Google
(2) Saves lives too for those who refuse to not read/reply to texts while driving
(3) Keeps drivers behaving legally (outside of common sense, many provinces and states have enacted laws to try and protect people against themselves)
(4) A critical enterprise feature if Apple is attempting to continue to break into that market, most fortune 500 companies that have employees using fleet vehicles use Ford, but frankly other manufacturers coming to market with these features too.
Thanks for consideration around this feature. If you'd like to understand the use-case more or be pointed to threads in the discussion forum and 3rd party websites begging for this feature, happy to discuss.
Kind Regards,
Brian R. Kneebone

Using Calc Manager to update values for Members with Text Data Type

Hi All,
In my outline I have a member of text data type. The purpose is to allow users to be able to enter comments.
Each line item is created through a business rule and I am prompting the user to enter the key values at the launch of the calc manager rules. I want to be able to prompt the user for the comments in the calc manager rule because I know that it supports variables of type string. However I am unable to assign this string variable directly to the member.
I appreciate that essbase only stores numeric data and that all text data type members really store numeric values which are basically the id's of the text string stored in a relational table by planning. however I cannot update the database table through calc manager and then bring in the generated id. Is there any way I can do this?
I don't want to skip this field in the calc manager rule and expect the user to enter the comments AFTER the line item has been created because the users want this to be a mandatory field and insist that a new line item not be created unless comments are specified.
Many thanks in advance for any help I can get.
Shehzad

If the comments are a set definition you could you smart lists in your planning forms.
create this in your smart list
xxxx = 1
yyyy = 2

Query variable for characteristic with texts

Hello experts,
I need some help on the following issue:
I want to do master data reporting on a characteristic of type numc that has texts.
I need to filter on a certain text range of the characteristic by using a variable, e.g. select all records between E* and F*.
The problem is that I can only access the numeric ranges of the characteristics and not the texts directly.
Any ideas?
Thanks in advance.

hi ,
create a variable using texts and then try .
regards .. Kumar Sarvepalli .. /// Honor points

Ringtones Selected for Sync with iPhone does not showup in iPhone

In iTunes library under ringtones I can see few files and I can play them as well (They are of type m4r format). However when I chose to Sync All Ringtones (or even specifically this) iPhone does not show this in its Custom tone list.
This is happening for a specific ringtone. Other ringtones I am able to sync and see it in iPhone.
Please help.

Plug the iPhone and go to files/Transfer purchases...
The apps should start transferring to your pc...
You'll see them in iTunes, in the applications list...
Click right in any of these apps and you'll find in which folder these files are located...
If its not transferring the apps, it means the appleid with which the apps have been bought is not authorized to be used on the iTunes and on this pc...
Go to AppStore, sign out from the appleid you're signed in to, and sign in to the appleid used to download the apps...
After you sign in, download any free app...
That should take care of authorizing your account on your pc and therefore allow transferring the apps to your pc...

Selection for infoobject with TEXT

Similar Messages

Maybe you are looking for