Selection for maintance Veiw v_curc

Hi All,
Kindly help me on the following requirement.
I need to select waers from maitance view v_curc. As it is a maintaince view so we can not go with select statement directly.
We need to selct the table used in the view.
the table are TCURC and TCURT . Kindly let me know how to go about the slection of WAERS using these table.
many thanks,
Anuj.

Dear Anuj,
I've try in IDES using this syntax. May this can help you.
      REPORT ZWIL_SELECT_TCURC_TCURT.
      tables: tcurc,tcurt.
      DATA : xwaers TYPE tcurt-waers,xgdatu type tcurc-GDATU.
      select awaers bgdatu into (xwaers,xgdatu)
           from tcurt as a inner join tcurc as b on awaers = bwaers where a~waers = 'MXP'.
      endselect.
Thanx
Wili

Similar Messages

Error message: "playlists selected for updating no longer exist"

I tried to update my ipod nano and I guess I had deleted a playlist, but since then, I have not been able to update. Every time I try, I get the following message:
"Cannot be updated because all of the playlists selected for updating no longer exist."
I haven't been able to highlight which playlists are selected to begin with.
I read through the manual and thought that maybe rebooting the whole system might work. So I deleted Itunes from my computer and re-installed.
Then I tried re-setting my ipod. So now I have nothing on my ipod.
I also deleted everything from my library, thinking it might help to start from scratch. Nothing has worked.
How do I "select" and "unselect" playlists so I can get up and running again?

Here you go.
http://discussions.apple.com/thread.jspa?messageID=607312&#607312

How can I display "detailStamp" facet selectively for rows in a table ?

Hi,
My JDEV version is Studio Edition Version 11.1.1.5.0
I am trying to display "detailStamp" facet selectively .
If I read api in link below
http://docs.oracle.com/cd/E26098_01/apirefs.1112/e17488/oracle/adf/view/rich/component/rich/data/RichTable.html
Use the "detailStamp" facet on the Table to include a collapsable content area for each table row. Please note that the height of the open detail area will be a set height based on the height of the detailStamp component. Adding a component that changes in height (like showDetail or panelBox) will by default produce strange results when the detailStamp component's height changes.
Detail Stamp can be selectively displayed for rows in the table by EL binding the "rendered" attribute of the "detailStamp" facet to "true" or "false". The EL binding can contain references to the table "var" attribute since during rendering it will be executed in the context of the row. Disclosure icon is displayed only for rows which have rendered="true".
I can see that i can achieve it by setting rendered property for that facet. BUT this property is not available in Studio Edition Version 11.1.1.5.0

Hi Frank.
Thanks for your quick reply .
But I am using Studio Edition Version 11.1.1.5.0 . In this version the property RENDERED of f:facet name="detailStamp" is NOT allowed.
Edited by: user13764942 on Feb 7, 2013 5:48 AM
Put in another way , I want to render the "detailStamp" facet selectively for rows , so for that I need the RENDERED property of "detailStamp" facet. This property is ONLY available in Jdev version 11.2 . I am using Jdev 11.1.1.5.0 so I need some alternative to RENDERED property as this property is NOT available in Jdev 11.1.1.5.0.
Please suggest some way to achieve this behaviour of displaying "detailStamp" facet selectively ....
Thanks!
Edited by: Mangpal Singh on Feb 7, 2013 11:57 PM

Songs cannot be synced: playlists selected for syncing no longer exist

"Songs on the ipod cannot be synced because all of the playlists selected for syncing no longer exist"
I finally filled all of the memory in my nano for the first time, and I got a popup to put all of my playlists in one file so it wouldn't take up as much space. When I saw it, I deleted it, I wasn't aware of what was going on. I tried to fix it by changing the settings to manually sync music but that didn't work. Then I restored my ipod and now it doesn't have any songs on it. So I tried to uninstall everything, itunes and ipod to restore the settings back to normal but that didn't work either. Everytime I connect my nano, all it says it can't sync because the playlists don't exist anymore. I don't know what to do anymore. Can someone help me?
inspiron b130 laptop Windows XP

But then it says it can't read or write to my nano.
is that the message discussed in the following document?
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod

Lost music on ipod because "playlists selected for updating no longer exist

Not sure what I've done. I recently downloaded newer version of itunes. Then when synching, I had too much music in my library for the ipod to handle so it told me about doing the smart playlist. I erased a couple of playlists on the itunes menu I no longer wanted and then when I went to synch, this error came up "songs on the ipod cannot be updated because all of the playlists selected for updating no longer exist."
Please help.....

Check this out.
iPod cannot sync because one or more playlist....

Songs on iPod cant be synced cuz all of the playlists selected for...

all songs in my nano was gone so i tried to load songs again to it,
but iTune kept saying this message below, even there are songs in my iTune (but not in my nano).
"songs on iPod cannot be synced because all of the playlists selected for syncing no longer exist."
how do i load my songs back to my nano??
mine is 2nd gereneration.
Plz help me!!
Message was edited by: shan1211

See this user tip.
The iPod cannot be updated because one or more playlists no longer exist.
For versions of iTunes from 7 onwards, the option to "update selected playlists" is now under the "music" tab in the summary screen.

"All of the Playlists Selected for Updating No Longer Exist"

My family has 2 ipod shuffles. After purchasing a Nano recently, I inserted the cd that came with it. Apparently the existing iTunes software was removed and reinstalled. At any rate, the library still shows all the original songs, but when the Nano is plugged in, iTunes immediately gives a prompt stating "Songs on the iPod *** cannot be updated because all of the playlists selected for updating no longer exist." The library is there, the playlists that were there are there, and I can play the songs on my cpu. Is there anything I can do besides completely uninstalling everything and starting over?
iPod Nano Windows XP Pro

This user tip should help you sort out your missing playlist problem: Hudgie - iPod cannot sync because one or more playlists are missing

Have a 3rd gen nano, when I plug in I get "Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist." I have no podcasts in my IPOD or queued in library. Help pls. Thx

Wnen I plug in my IPOD, I gret the error message " Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist. I have no podcasts in my IPOD or queued in I tunes at pfresent. When I did try to sync a current podcast, nothing happened although the podcasts did show in my library. I did play around with podcasts several months ago, but just listened to them on the computer, the IPOD was plugged in at times though, although not set up...thx

Click here and follow the instructions.
(27971)

"...(ipod) cannot be updated because all of the playlists selected for

Please help! I get the error message, "Songs on the iPod
cannot be updated because all of the playlists selected for updating no longer exist." So it seems that I erased the playlists from my iPod. I have done the "Five Rs."
Doing the iPod Updater took 2 1/2 hrs. It did not help.
How can I get my iPod to work?

See this.
iPod cannot sync because one or more playlist is missing.

Playsists selected for syncing no longer exist? ipod won't update

My new ipod won't update because it says that playlists I've selected for syncing no longer exist. For this reason I can't get any of my music onto my ipod and I don't understand what I am supposed to do to fix this
dell inspiron Windows XP

Hi guys, I've been having the same problem. Specifically, when I try to transfer songs from iTunes to my iPod I get the following error message: "Songs in the iPod "My iPod" cannot be updated because all the playlists selected for syncing no longer exist". I did some searching around at this site, and found that one possible problem is that my library is larger than my iPod's capacity, so I have to eliminate some songs. I did this, but I still get the same error message.

"Playlists selected for updating no longer exist"?!

everytime i plug my ipod mini into the computer, a pop up appears saying that the playlists selected for updating no longer exist!!! it's done this before, so i completely restored the setting and made a whole new library. now it's doing it again. i have all the playlists and songs on my computer in a folder. all the songs that were on my ipod, got deleted when i plugged it into the computer. so my ipod is blank, but i have the songs in my library still. they just wont upload. any help would be greatly appreciated....

Check this out.
iPod cannot sync because one or more playlist....

Advance select for source file in Sender File Adapter

Hi
I am trying to utilise the parameter 'Advance Selection for source file' on a sender file adapter to pick the file from multiple folders
My problem is that this parameter that is listed on the SAP help is not getting in File accessing Parameters.
I am running PI 7.02 (NW702_07_Rel)
Service pack 07
Has anyone come across this before?
any suggestions on how to do this?

Hi,
In PI7.0 the property exists. I have used it previously. I think SP was 13.
Regards,
Nutan
Edited by: nutan champia on Nov 24, 2011 10:42 AM

SRM 7.0 company code selection for manual PO

Dear All,
We use SRM 7.0 and I have created a purchasing group under a central purchasing organization. This purchasing group is responsible from procurement of two different Company Codes. I did all the assignments in responsibility tab and attributes tab under PPOMA_BBP.
When i try to create a manual PO, I don't see any option to select the company code, either in "Overview" tab , nor in "Header" tab.
Does anybody know or help me how to select/enable company code selection for manual PO creation ?
Thanks in advance,
Best regards,

Dear Kumar,
Thanks for the info. In my organization, there are two company codes and apart from them there is a Purchasing Org.
All the attribute settings are done for these company codes. While creating a PO, as there is no field for Company code, system determines the company code automatically in background. (let's say Company code X). But I'm trying to create a PO for company code Y. When I enter the cost center, I got the error "Cannot purchase between company codes".
So how am i going to select company code Y ? How the system will determine company code Y ? Can you please give in details what must i do ??
Thanks in advance,
Best regards,

Difference in select for update of - in Oracle Database 10g and 11g

Hi, I found out that Oracle Database 10g and 11g treat the following PL/SQL block differently (I am using scott schema for convenience):
DECLARE
  v_ename bonus.ename%TYPE;
BEGIN
  SELECT b.ename
    INTO v_ename
    FROM bonus b
    JOIN emp e ON b.ename = e.ename
    JOIN dept d ON d.deptno = e.deptno
   WHERE b.ename = 'Scott'
     FOR UPDATE OF b.ename;
END;
/While in 10g (10.2) this code ends successfully (well NO_DATA_FOUND exception is raised but that is expected), in 11g (11.2) it raises exception "column ambiguously defined". And that is definitely not expected. It seems like it does not take into account table alias because I found out that when I change the column in FOR UPDATE OF e.empno (also does not work) to e.mgr (which is unique) it starts working. So is this some error in 11g? Any thoughts?
Edited by: Libor Nenadál on 29.4.2010 21:46
It seems that my question was answered here - http://stackoverflow.com/questions/2736426/difference-in-select-for-update-of-in-oracle-database-10g-and-11g

The behaviour seems like it really is a bug and can be avoided using non-ANSI syntax. (It makes me wonder why Oracle maintains two query languages while dumb me thinks that this is just a preprocessor matter and query engine could be the same).

PSE 8.0 (Mac) Trial Version, no selection for Slideshow.

I select photos in Bridge then click on Create, there appears to be selections for Web Photo Gallery and for PDF Slideshow but no selection for plain ordinary Slideshow. Did Adobe eliminate the plain jane Slideshow from this version?
Regards,
Bob

Thanks Barbara, I will go to the Hands On Training Room at the Green Valley Camera Club and use one of the Vista machines to build my lesson plan. Hopefully that version will have a basic Slideshow selection. When I saw the new PSE Version 8.0 for the Mac I thought it would be the one to use to teach the new class next week, so I installed the Trial version.
Our club is very active and has just installed PSE ver 8.0 on all six of the Vista machines and the instructors console. In case you want to have a look at us, our web site is: www.gvcameraclub.org
Our membership oscillates between 1,000 and 1,200 members. Right now we have 120 signed up for our 10-week Photography Basics Course.
Thank you again for your prompt reply,
Bob

Selection for maintance Veiw v_curc

Similar Messages

Maybe you are looking for