Selection Options in Info Pakcage.

Hello People,
                    I am uploading data from a flat-file into the psa--> Infosource --> Infocube.
the data is loading correctly. all the transfer rules, update rules and communication structure are activated.
in my flat file i have a field: 0fiscper = fiscal period with the following values:
0FISCPER
0012008
0022008
0032008
0042008
0052008
0062008
However, durign the upload, i want only the records bearing 0fiscper 0012008 upto 0032008 to be loaded. that is in this case i want only the first 3 records to be loaded into the PSA and then into the cube.
In the transfer structure i have ticked the checkbox under the column selection. under the data selection tab in info package i have specified the value range.
The problem is that when i do a preview , the restriction does not apply. when i tried to load data into the cube no records were selected.
Kindly explain and advise as appropriate.
Regards,
Izzytech

hi Bhat,
            I have already tried what you said but its not working. its not even selecting records from the flatfile to the psa. My Psa & CUbe remian empty.
the checkbox is checked for the selection column in the transfer structure.
I dnt understand why it is not working.
Regards
Izzytech

Similar Messages

  • Selection option in info package

    Hello Friends,
    While loading data in BW system (3.5 Version).
    I would like to use selection option in info package for one particular field.
    I can see only range options (Selection From and Selection To) which does not satisfy my requriement.
    I need to select nearly 5000records which are in one specific number range, so, how can i select these records in infopackage.
    Thanks
    Tony

    Did you think of InfoPackage routine?
    Try to write a routine under data Selection tab based on your data selection scenarios. I think you can achieve your goal.
    1) Data selection tab - Type column, choose ABAP routine.
    Whendo we use this?
    when we cannot extract data selectively by giving direct conditions in selection tab, eg: "list all the employees who joined on the current date". here current date value changes every day when we run the query. In such cases we cannot give direct condition, we need to write routine to get the current date
    Check this if it helps to proceed:
    ABAP ROUTINE AT INFOPACKAGE FOR DATE RANGE
    InfoPackage Routine

  • Data selection options in info package

    hi,
    I am using filter for current month while loading data into info provider (let us say 0calmonth). I am using below code in info-package after selecting type '6'  (ABAP editor),
    data: l_s_range type rssdlrange,
    l_date type d.
    l_date = sy-datum.
    l_year = l_date+0(4).
    l_mth = l_date+4(2).
    concatenate l_year l_mth into l_month_high.
    concatenate l_year '01' into l_month_low.
    loop at l_t_range into l_s_range where fieldname = 'CALMONTH'.
    if dy-subrc = 0.
    l_s_range-low = l_month_low.
    l_s_range-low = l_month_high.
    modify l_t_range from l_s_range.
    endif.
    endloop.
    But now I would like to use created date as filter instead of calmonth/year (yyyymm). please note that calmonth has only one value but calendar day will have both from and to values. Please give me code to use created date (mm/dd/yyyy).
    please help me with your code.
    thanks,

    I have got the solution by myself (trial and error method). Solutions: there is a SAP delivered variable to calculate current month (Variable name is 0CMONTH).
    Is there any variable to calculate both previous month and current month as filter value? pls reply.

  • Selection Option question in Info Package

    We would like to stop update Master Data if no master data exists for a characteristics. I found there is a selection options in Info Package Update Tab called "Do not update data if no master data exists for a characteristic"
    I added a row in one of the InfoObject which has been used in another InfoObject as an Attribute. I selected this option in the IP and tried to re-load Master Data, and it didn't fail.
    What does this option do?
    Thanks!

    For example:
    InfoObject ITEM and ITMPLN. ITEM is an Attribute in ITMPLN.
    ITEM has
    Item    Description
    001     Test 1
    002     Test 2
    ITMPLN has
    Project No            Item         Description
    A                         001          Test A
    B                         002          Test B
    <b>C                         004          Test C</b>
    After I load the last row to ITMPLN, I would like to see the error message instead of adding <b>004</b> into ITEM InfoObject. Do you know how to do it?
    Thank you!

  • Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Checking against Select-Options with "CP" using "IF value IN select_option"

    Dear experts,
    first of all: I'm sorry, if this question already should have been asked and answered!
    I tried quite a lot of search terms but didn't find anything helpful.
    We are using a statement like "IF value IN select_option" to perform comparisons after the Select-Options have been used in a SELECT statement. This logical expression fails (compared to the results of the DB-SELECT) whenever a select-option line contains the option CP (Contains Pattern). To be more specific: The case sensitivity of the LOW value doesn't seem to play a role any more. A variable with the value 'ABCD' would be positively checked against a select-option with OPTION 'CP' and LOW 'abc*', whereas this value wouldn't have been selected if the select-option had been used in a DB-SELECT.
    Does anybody know a workaround?
    Thanks in advance
    Andreas

    Dear Keshav,
    it's an own field in an own table, defined as CHAR of length 140 (lowercase allowed), reflecting to a line of remittance info of an account statement. A regular Select-Option for this field is provided in a report which works perfectly fine regarding the case sensitivity. For reasons I don't want to point out in detail we need to check a value in this field against the select-option without selecting it from the db again.
    Let's assume that a field remittance_info contains the value 'ABCD'.
    A line of the select-option table looks like this:
    select_option_table-SIGN = 'I'
    select_option_table-OPTION = 'CP'
    select_option_table-LOW = 'abc*'.
    Then an ABAP statement such as
    IF remittance_info IN select_option_table.
    * would be true !!!
    ENDIF.
    but wouldn't deliver a result in a SELECT such as
    SELECT * FROM my_table INTO TABLE my_internal_table WHERE remittance_info IN select_option_table.
    because of the differences in lower/upper case.
    regards
    Andreas

  • Error while using selection option variable in the selection screen

    Hi All,
    I am facing an issue while using selection option variable in the selection screen for one of my reports.
    Scenario: For the field "Region From" we need to have wild card logic () in tes selection screen, for example if we put "BE" in the selection screen for the field Region From then the query should be executed only for those "Region From" values which begin from "BE".
    Approach: For the above requirement I have made a selection option variable for "Region From". This allows use wild card
    But when the report is executed we get the following error:
    "System error in program CL_RSR_REQUEST. Invalid filter on ETVRGNFR".
    (ETVRGNFR is technical name of the info object Region From)
    Though the report is executed it displays all the values for the field "Region From" irrespective of the selection given in the selection screen.
    Please give suggestions / alternate solutions to crack this issue.
    Thanks in advance
    Regards
    Priyanka.

    Hi,
    Try to use a variable of type Customer Exit and do the validation inside the exit to display according to your request.
    This is just my view, i am not sure if u are already using this or Char. Variable.
    Cheers.
    Ranga.

  • How to retrieve data using logical database and custom select options

    Hi all,
    I have a selection screen which is displayed by logical database PSJ and I have two select options of my own. I need to retrieve data based on both selection screen of logical database and my own select options. How can I do it?
    Thanks in advance.

    Hai Gupta
    Check the following Document & Links
    1. A logical database is in fact
    a program only.
    2. This LDB provides two main things :
    a) a pre-defined selection screen
    which handles all user inputs and validations
    b) pre defined set of data
    based upon the user selection.
    3. So we dont have to worry about from
    which tables to fetch data.
    4. Moreover, this LDB Program,
    handles all user-authorisations
    and is efficient in all respects.
    5. tcode is SLDB
    good info about Logical Database. you can check the link.
    http://www.geekinterview.com/question_details/1506
    http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
    Re: How to Create and Use ldb in reports?
    Re: Logical databases
    http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
    Functions for displaying and changing logical databases:
    Call Transaction SE36 or
    Choose ABAP Workbench -> Development -> Programming environ. -> Logical databases
    Interaction between database program and report:
    During program processing, subroutines are performed in the database program and events are executed in the report.
    To read data from a database tables we use logical database.
    A logical database provides read-only access to a group of related tables to an ABAP/4 program.
    advantages:-
    The programmer need not worry about the primary key for each table.Because Logical database knows how the different tables relate to each other,and can issue the SELECT command with proper where clause to retrieve the data.
    i)An easy-to-use standard user interface.
    ii)check functions which check that user input is complete,correct,and plausible.
    iii)meaningful data selection.
    iv)central authorization checks for database accesses.
    v)good read access performance while retaining the hierarchical data view determined by the application logic.
    disadvantages:-
    i)If you donot specify a logical database in the program attributes,the GET events never occur.
    ii)There is no ENDGET command,so the code block associated with an event ends with the next event
    statement (such as another GET or an END-OF-SELECTION).
    1. transaction code SLDB.
    2.enter name z<ldb-name>
    3.create
    4.short text
    5.create
    6. name of root node (here Ekko)
    7. enter short text (f6)
    8.node type -> data base table.
    9.create
    10 change logical DB
    riht click on ekko and insert node
    here node name ekpo
    11.create
    12. click on selections
    13. press no Should the changed structure of Z<ldb name> be saved first.
    14.select tables which you want to join.
    15.transfer
    16 now you have to o to coding part.
    17. save
    activate.
    19.click to src code
    double click on first include and activate
    Regards
    Sreeni

  • Using select-option in webdynpro for ABAP where I have two separate pages

    Hi Experts,
             I have a requirement where I have two pages. The first page is a selection screen that contains 2 select-options to select carrid and connid. There is also a button 'Submit'. The second page contains a ALV grid output based on the selection screen criteria.
    Second page is opened on the clicking the 'Submit' button in first page.
    How to design a ABAP webdynpro component for this scenario?
    How to pass select-option values to the next page?
    What nodes/attributes should I have to create in component controller?
    Please provide me the step by step info.
    I have seen the weblog by Rich Heilman at /people/rich.heilman2/blog/2005/12/20/using-select-options-in-a-web-dynproabap-application
    But it has only one page. So I am not able to recreate my scenario based on this.
    Thanks
    Gopal

    Hi Experts,
             I have a requirement where I have two pages. The first page is a selection screen that contains 2 select-options to select carrid and connid. There is also a button 'Submit'. The second page contains a ALV grid output based on the selection screen criteria.
    Second page is opened on the clicking the 'Submit' button in first page.
    How to design a ABAP webdynpro component for this scenario?
    How to pass select-option values to the next page?
    What nodes/attributes should I have to create in component controller?
    Please provide me the step by step info.
    I have seen the weblog by Rich Heilman at /people/rich.heilman2/blog/2005/12/20/using-select-options-in-a-web-dynproabap-application
    But it has only one page. So I am not able to recreate my scenario based on this.
    Thanks
    Gopal

  • Select option in modular programming...?

    Hi Abapers,
                     I have a problem where in i want to use select options in modullar programming.....
    and one more thing that when ever i  am using an EXECUTE button which has been defined manually by me..
    the report show the output but wen i am coming back to the screen and again i am using EXECUTE  butto
    the value are repeated..
    so can anyone answer to both of my questions pls......

    for answer to ur first Question
    Best option is to go for a report program
    If still you need to go for module pool there is one solution.
    1. Define a subscreen on ur screen.
    2. Define The screen as we do in report program but with addition 'AS SUBSCREEN' .
    3.call the subscreen in ur flow logic of main screen.
    Following code may help.
    define this in ur top include.
    SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
    SELECT-OPTIONS:
                    s_vkorg1  FOR zadvhead-vkorg  NO-EXTENSION NO INTERVALS,
    SELECTION-SCREEN END OF SCREEN 200.
    in screen flow logic
    PROCESS BEFORE OUTPUT.
    CALL SUBSCREEN subscr_is1 INCLUDING sy-repid dynnr_is1.
    "dynnr_is1 = 0200 & subscr_is1 = subscreen area name
    PROCESS AFTER INPUT.
    CALL SUBSCREEN subscr_is1.
    for more info
    Re: Module Pool Program
    Edited by: mrugesh phatak on Oct 1, 2008 12:23 PM

  • ECC6.0 t-code COOIS - how to get the "Profile" select-option list

    Hi  PP Gurus
    We are implementing ECC6.0
    We upgraded one of the systems from 4.7 to ECC6.0 (and also kept data: documents, users profiles, variants,u2026etc).
    My question is regarding standard transaction COOIS.
    I do comparison in current 4.7 and ECC6.0 systems (I have SAP_ALL and SAP_NEW in both systems).
    The thing is that in our ECC6.0 system the transaction COOIS doesnu2019t display Profile on select-options screen.
    There are only the following items (select-option screen of COOIS in ECC6.0):
    -LIST
    -LAYOUT
    -Prod.orders checkbox
    -Planned orders checkbox
    u2026And u2018Selectionu2019 tab with other fields
    In the current Enterprise 4.7 system the transaction COOIS displays the following select-option screen:
    -LIST
    -PROFILE
    -LAYOUT
    -Prod.orders checkbox
    -Planned orders checkbox
    u2026And u2018Selectionu2019 tab with other fields
    Questions:
    1.     Is that possible to maintain / see and select a PROFILE in COOIS of ECC6 (or due to new functionality it no more available on that screen ?) How to do that?
    2.     Looking at layouts (I ran COOIS in two systems and compared the results) I canu2019s see in ECC6.0 some icons like u2018Refreshu2019, u2018Order logu2019, u2018Display order componentsu2019, u2018Long textu2019 , u2026.) But all of them are in 4.7 layout. How to get them in ECC6.0 ?
    What I have already explored:
    u2022     ECC6.0 has a new config. t-code COISN (4.7 has only COIS) . I created my new overall profile there, set my own layout, but running COOIS still canu2019t see/use the PROFILE;
    u2022     I have compared the standard structure PPIO_ENTRY_SC1100 in 4.7 and ECC6.0 and found the new component COIS_LISTTYP in ECC6.0. In this situation I ran a new t-code u201CDefine New List Typesu201D (it doesnu2019t exist in 4.7) and created my new entry, but still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
    u2022     I also tried situation when both config. transaction COIS (in 4.7 and ECC6.0) had the SAME overall profiles u2013 still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
    u2022     I found a new icon u201CNavigation profileu201D in result layout of COOIS ECC6.0 Is that right place where I can maintain the icons I need (see my second question) ?
    THANK YOU.

    Hi,
    The reports are modified if am right as of ECC 5.0. Refer to note - 747469 which gives a list of all reports modified.
    If am right by profile you mean navigation profile, this is now in the display screen. The content remains, only thing is the layout is modified & more structured. So i would suggest you to have a look around in COOIS report & you will find the info.
    The navigation profile is adjacent to the icon called Environment (its a drop down list).
    Revert if you face any issues.
    Regards,
    Vivek

  • Need to write ABAP Routine at infopackage Selection Options

    Hi All,
    I need to write ABAP Routine at Info Package Selection Options.
    Requiremnet i need to bring  some Sales Document Types (Sales Orders Types) only from R/3.
    Ex I need OrderTypes ZQT,ZSIV etc
    Can any body help to resolve this.
    Regards,
    P.C.V.

    Hi P.C.V,
    If the order type field is already available in the Data Selection Tab of the InfoPackage, then you just need to place your selections there (e.g. order type = ZQT, ZSIV) without the need to use ABAP routines.
    If ever you really need an ABAP routine, here is an example ABAP routine. The most important concept is to modify the range table l_t_range so that the selection reflect what you need.
    data: l_idx like sy-tabix.
    data: w_startdate like sy-datum,
          w_startweek like scal-week,
          w_maxdate like sy-datum,
          w_maxweek like scal-week.
      w_startdate = sy-datum.
      w_maxdate = w_startdate + 104 * 7.
    * Calculate horizon for extraction
      CALL FUNCTION 'DATE_GET_WEEK'
        EXPORTING
          DATE         = w_startdate
        IMPORTING
          WEEK         = w_startweek
        EXCEPTIONS
          DATE_INVALID = 1
          OTHERS       = 2.
      CALL FUNCTION 'DATE_GET_WEEK'
        EXPORTING
          DATE         = w_maxdate
        IMPORTING
          WEEK         = w_maxweek
        EXCEPTIONS
          DATE_INVALID = 1
          OTHERS       = 2.
              read table l_t_range with key
                   fieldname = 'CALWEEK'.
              l_idx = sy-tabix.
              l_t_range-sign = 'I'.
              l_t_range-option = 'BT'.
              l_t_range-low = w_startweek.
              l_t_range-high = w_maxweek.
              modify l_t_range index l_idx.

  • Dynamic F4 for Select Options

    Hi,
    I have two Select-Options for Kunnr and Bukrs.
    My requirement is that,
    when I select a particualar Kunnr in the Select Option the Corresponding Bukrs must appear in the F4 for the S_BUKRS.
    Can someone help please.
    Thanks,
    Supriya Manik.

    You might have to code a search help exit to achieve this purpose.
    In the KUNNR search help, have the exit export the selected value to parameter ID KUN.
    Then, from the BUKRS search help, read this value and pass it to the KUNNR field in the F4.
    You can find more info on search help exits at:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee52446011d189700000e8322d00/frameset.htm
    Hope this helps.
    Sudha

  • Add new select option for VT04 variants

    Hi Experts,
    Want to know the process of how we add a new select option (say sold-to/KUNAG) to the existing set of selection criteria in the variants in VT04 apart from implicit enhancements.
    Even if we create a new implicit enhancement in LV56LSCR, the new field (sold-to/KUNAG) has to be further added to the select statements also. The select statement in the subroutine INDEX_SELEKTIEREN in LV56LF01 has to be enhanced for the same.
    Also should this new field has to be added to the EXPORT TO and IMPORT FROM MEMORY ID MEMORY_LFSL statements in the other includes of SAPLV56L ?
    Is there a better/recommended way to do this? Any pointers are much appreciated. Thank You.
    Regards,
    Narendra.

    Hi Ravi,
    This is infact the program for the txn VT04, would you be able to shed any other info? Thanks.
    Regards,
    Narendra.
    Edited by: Narendra Daka on Dec 7, 2011 9:00 AM

  • I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

    I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

    Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
    Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
    Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
    When you're done, turn TM back ON and close its preference pane.

Maybe you are looking for