Selection screen as in MD02 in a custom program

Hi everyone.
I need to create a program for which the selection screen should contain all of the MD02 tcode select options except the material and plant.
Please let me know how I can achieve this.
I dont know what fields I need to describe in the parameters.
Thanks,
Lakshmi

I dont want to create as module pool. I want to actually create as a report.
I will be more clear. I need in the selection screen, the sales order number and all selection screen options of MD02. (Except the material and plant select options).
Then if we enter the sales order number, I need to display the list of sales order nr, item nr, material, material descr, plant. I need a check box in front of each line in the display of this list.
Then I need to select few of these and click a push button and do MRP based on some logic.
Please give me some ideas how I can achieve this.
Thanks,
Lakshmi
Edited by: lakshmi P on Aug 21, 2008 11:46 PM

Similar Messages

How to create selections-screens to display PO using module pool program

All,
I'm new to module pool programming. Can any one please provide me where to create selections screens to display existing purchase orders using the below selection criteria in thr module pool program.,
SELECT-OPTIONS : S_LIFNR FOR EKKO-LIFNR,
                 S_BSART FOR EKKO-BSART,
                 S_BUKRS FOR EKKO-BUKRS,
                 S_WERKS FOR EKPO-WERKS OBLIGATORY,
                 S_BEDAT FOR SY-DATUM,
                 S_EINDT FOR EKET-EINDT,
                 S_EBELN FOR EKKO-EBELN,
                 S_MATNR FOR EKPO-MATNR.
provide me step by step to do this.

Hi,
Thanks for the reply can you please let me know.
How can I create the ranges
like low and high in the selection.
Using se51 i was able to do only one i,e
example I need
purchase order number----
f4 -
f4
Can please tell me how to do this

Change order variable in selection screen of WAD

Hi,
I created a wad with 2 queries.
Selection screen of Query A :
Year
Month
Site
Customer
Activity
Selection screen of Query B :
Year
Site
Customer
I checked the [MELT_VARIABLES] in the WAD because Year, Site and Customer are in both queries
Unfortunately, the result in my wad is :
Year
Site
Customer
Month
Activity
But i would like to have :
Year
Month
Site
Customer
Activity
How could i do it ?
Thanks in advance

@Rakesh,
I'm using WAD 7.0
@Edward,
Yes, i know it's possible to change the ordre in Query Designer.
It's why i set the sequence in Query A and Query B as i showed in my initial post.
Unfortunately, it seems than in WAD the sequence is changed.
First, it show the variable that exist in both queries ( in my case : Year, Site and Customer )
then the variable that exist only in query A ( Month, Activity )
then the variable that exist only in query B ( Nothing )
I wish to change this behavior.
Thanks,
David

How to create the selection screen dynamically

Hi,
I have a requirement to create the selection screen Dynamically. All the fields that should appear on the selection screen will be available in a custom table. So, based on the entries available in the Z tables, the selection screen should be built. Eg. If there are 10 records available in the Z table, the selection screen should consist of 10 fields. If there are 100 entries, the Selection screen should contain 100 fields. and the logic to build this selection screen should be carried out dynamically in the program.
Could anyone of you please share the valuable inputs on this. If anyone has the sample code to do this, please share.
Thanks in advance.
Regards,
Paddu.

Hi,
Kindly go through this sample program below:
DEMO_LIST_FORMAT_INPUT *and
check this function module:
FREE_SELECTIONS_DIALOG *.
Hope it helps
Regards
Mansi

At selection screen output dialog

how i can make
i have customer i want when i click enter to get the description.
the program is dialog , i get always err,and when i put in PBO or PAI.

Hi Little ,
What i understand is that you are working on a report and not a module pool.
If it is a report then you will first have to modify the selection screen , go to SE51 , put in the program name and the screen number ( which is generally 1000) , on the screen add a new I/O box which is for Output only let it be KNA1-NAME1 .
Now you need to write the code in the event AT SELECTION-SCREEN OUTPUT .
Here is the sample code for the same
tables : kna1.
parameter : kunnr type kna1-kunnr.
at selection-screen output.
if not kunnr is initial.
select single name1 into kna1-name1
from kna1
where kunnr = kunnr.
endif.
Hope this helps.
Regards
Arun

Possible to modify Logical Database Selection Screen?

We have added a custom field to an HR database and need for it to appear in the selection screen for logical database PNP. The program DBPNPSEL is this selection screen -- has anyone modified this or is there a better way to get this result?

Hi,
Check this link.It contains code sample.
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9c2e35c111d1829f0000e829fbfe/content.htm
Regards,
J.Jayanthi

Include a dialog screen in tabstrip of selection-screen

Hi All,
Could anyone please tell me how to include a dialog screen into selection-screen? We have a normal selection screen for a report but now we need to add some more function and this requires to key in material number in first column and quantity in second column in a tabstrip subscreen(eg. screen 2000) and put current select-options(screen 1000) in another tabstrip to make user easily switch between new filters and previous filters. I've no idea if it's possible to have a dialog screen included in a tabstrip in the selection-screen. So please give me some suggestion. Thanks.
Best Regards,
Jeff

Hi Jeff,
In the selection screen you need to call a custom tab strip that would have two sub-screens 1000 and 2000. It is completely designing of tab strip and its code manipulation.
Did you search for TAB STRIP IN SELECTION-SCREEN ?
This will help you in from start-up designing of tab-strip. It's not possible here in forum to explain all the steps in details.
For your help you can refer the link
[Sub-screen in Tab strip|Tabstrip and Subscreen;
This link gives you a complete idea on Tab strip
[Creating a Tab Strip Control|http://help.sap.com/saphelp_nw04/helpdata/en/04/10f2469e0811d1b4700000e8a52bed/frameset.htm]
Still you can search and find more as per your requirement.

PNP and Selection Screen 900 and Authorization

We have used the combination of logical db PNP with selection screen 900 to write a few custom payroll reports. We noticed right away that this combination seems to ignore HR authorizations. Meaning, someone could read payroll results for employees they are not authorized to see. We had to add our own authorization checks.
Am I missing something or is something wrong with the 900 selection screen?

Hi Kenneth,
The 900 selection screen is for evaluation of Payroll Results. The system checks whether the user who started the evaluation has the correct authorization for this evaluation. Since the data retrieval is from the Payroll Results and not Master data the regular Authorization checks might not be relevant here. Even if the User has no authorization to view the Employee's Master data, he/she might still be able to view the Payroll results via this selection screen if he /she has the evaluation authorization. You are probably right in having to put in your own authorization checks. I hope I am not wrong.
Regards,
Suresh Datti
Message was edited by: Suresh Datti

FBL5N - Logical databases - Dyanamic selection screen fields

I am trying to insert "Profit center" from BSEG table of Logical database DDF into the dynamic selection screen of FBL5N.
Procedure I followed:
Program -> Attributes -> Logical database -> Extras -> Selection views.
Interestingly when I add "Profit center" from BSID table instead of BSEG, it appears on dynamic selection screen. But this is not working for BSEG. I have no clue why this is so? If someone can help me in this regard, that would be great.
P.S: I can not insert Profit center from BSID table as BSEG contains profit center values and BSID is not storing the same info.

Rob,
Below is the BSEG contents:
Company code Document Number Customer     Profit Center
1000         1800001111      0000100006
1000         1800001111                   0000000401
BSID contents:
Company code Customer     Document Number Profit Center
1000         0000100006   1800001111
As BSID stores customer info, I believe only line item that has customer info is stored here.
I guess, that is the reason.
I will try the option told by prev post. Will keep you guys posted.
Thanks,
Phani

Transaction Variant for Selection Screen

Hi, experts!
A question regarding transaction variants: Is it possible to create screen variants and transaction variants via SHD0 for selection screens? I' ve created a customer report with one selection screen including parameters and select options and would like to provide the users with a variant transaction for this.
Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported. And trying to create a transaction variant via SHD0 fails because values entered in the selection screen parameters and select options help screens are not saved and presented.
Any hints are more than welcome!
Regards,
Thomas

You wrote
Utilizing the "Save as variant" option from the selection screen itself works out perfectly, but this variant cannot be transported.
But, give the variant a name beginning with "CUS&" and this variant will be transported. Variant beginning with "CUS&" or "SAP&" are so-called "system variant" and are transported automatically. You can then copy the transaction code and use this new variant in the new transaction.
Regards,
Raymond

Selection screen modification in case of SAP Query

Hi All,
I want to modify the selection screen in a standard progam.
This program is getting generated through SAP QUERY.
i want to modify some fields and also delete some fields in the
selection screen. All these fields which i want to modify or delete
are the logical database fields.So i can't do it through the t-code SQ01
and SQ02. Also this is a program generated through the SAP QUERY,
so i can't modify the generated code. Request if any one of you can suggest me to solve this.
Waiting for a prompt reply!!
Thanks,
Rupesh

Go to SQ02
Select your Infoset-->Change
On next Screen.
Select GoTo->Code->Initialization.
Write there code
LOOP AT SCREEN.
IF screen-name EQ 'SP$00004'.
screen-required = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.

Selection screen data validation problem

Hello all,
Transaction FBL3N has an authority check on company. If the user enters a company for which they have no authority, a message displays and they can then exclude that company. The following steps can be repeated as many times as are required to ensure that all selection-screen values can be used. The program, RFITEMGL, is doing all of the authorization using the code of the logical database that is part of the program.
I added the following logic in my program, which works fine, except when the entered values fail the authority check, I can't get off of screen 1000 and get to the sub-screen to exclude the unauthorized values unless I first change the range on screen 1000.
For an example:
If I enter range '100 ' through '900 ', and there is an unauthorized company, '200' in that range, I can't add '200' as an excluded value without first changing the range to '100 ' to ' 199 ' on screen 1000.
Any thoughts on a solution? I tried looking at the logical database code without much success.
at selection-screen on s_bukrs.
check if person entering company has authority
data: i_t001 type table of t001.
data: w_t001 type          t001.
select * from t001
           into table i_t001
           where bukrs in s_bukrs.
loop at i_t001 into w_t001.
    authority-check object 'F_BKPF_BUK'
                id 'BUKRS' field w_t001-bukrs
                id 'ACTVT' field '03'.
    if sy-subrc ne 0.
      message e000(zf) with 'Company'
                          w_t001-bukrs
                          'not authorized'.
    endif.
endloop.
Thanks
Bruce

Hi,
Yes this is normal way as you entered wrong value in s_bukrs unless and until you change that you cannot proceed further.
instead of at selection-screen on s_bukrs.
use at selection-screen.
if s_bukrs is not initial.
do processing .,
and display info message'
endif.
or ., instead of error message use dispaly like 'E'
like.,
at selection-screen on s_bukrs.
check authority.,
MESSAGE 'You are not Authorized to use the Company Code' type 'S' display like 'E'.
hope this helps you,
Thanks & Regards.

Long Text box in Selection Screen

Hi,
How to create a long text box in the selection screen.
Is there any example/demo program in standard??
Regards
Jiku.

erm, what do you want to achieve with this?
should your users be able to search for long texts?
That will probably fail since there are differences between the input and the long text you are searching for.
Or do you have users making no faults?

Dynamic text in selection screen

Hi all,
I have one requirement in selection screen. I have a parameter and one pushbutton in selection screen .
To the right side of the parameter, i need to display the text based on some manipulation in a internal in the program.
If I click on the pushbutton in selection screen , manipulations will be done in the program in a internal table. if the result is ok i need to display the text in the right side of the parameter otherwise no need to display.
How can I achieve this.
Urgent
Thanks
Saravana

Hi
Write the code in the
AT selection-screen ON PARAMETER of the Button.
So when pressed on button, that code will do some process and the result will be displayed.
check it, whether it displays the text or not on selection screen.
see the doc
AT SELECTION-SCREEN - selscreen_event
Syntax
| { ON {para|selcrit} }
| { ON END OF selcrit }
| { ON BLOCK block }
| { ON RADIOBUTTON GROUP radi }
| { }
| { ON {HELP-REQUEST|VALUE-REQUEST}
|   FOR {para|selcrit-low|selcrit-high} }
| { ON EXIT-COMMAND }.
Alternatives:
1. ... OUTPUT
2. ... ON {para|selcrit}
3. ... ON END OF selcrit
4. ... ON BLOCK block
5. ... ON RADIOBUTTON GROUP radi
6. ... { }
7. ... ON {HELP-REQUEST|VALUE-REQUEST} FOR
      {para|selcrit-low|selcrit-high} }
8. ... ON EXIT-COMMAND
Effect
These additions allow individual evaluation of specific elements of the selection screens of the program. The information as to which selection has triggered the event is contained in the system field sy-dynnr.
Alternative 1
... OUTPUT
Effect
This event is triggered at the screen event PBO of a selection screen. In the event block, the selection screen can be prepared through assignments to the data objects of parameters and selection criteria and through dynamic screen modifications.
Note
The assignments to input fields in the event block AT SELECTION-SCREEN OUTPUT always affect the selection screen and overwrite the user inputs from previous displays of the same selection screen. Assignments in the event blocks LOAD-OF-PROGRAM oder INITIALIZATION, on the other hand, only have an effect at first program start.
Alternative 2
... ON {para|selcrit}
Effect
This event is triggered at the screen event PAI of a selection screen if the content of the input field of a parameter para or a line of a selection criterion selcrit was passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or an error message in the event block makes the fields para and selcrit ready for input again.
No parameter that is defined as a radio button can be specified. For this purpose, the addition ON RADIOBUTTON GROUP is provided.
Note
If a user action takes place in the dialog box for the multiple selection of a selection criterion selcrit, the entries of the selection table are passed to the program, line by line. For each line, the event AT SELECTION-SCREEN ON selcrit is triggered.
Alternative 3
... ON END OF selcrit
Effect
This event is triggered after the selection table selcrit has been fully passed to the program after a user action in the dialog box for the multiple selection has taken place. In the event block, the entire selection table can be checked.
Alternative 4
... ON BLOCK block
Effect
This event is triggered at the screen event PAI of a selection screen if all the input fields of a block block of the selection screen were passed to the ABAP program. In the event block, the user inputs can be checked. Sending a warning or an error message in the event block makes all the fields of the block block ready for input again.
Alternative 5
... ON RADIOBUTTON GROUP radi
Effect
This event is triggered at the screen event PAI of a selection screen if all the fields of a radio button group radi of the selection screen were passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or error message in the event block makes all the radion buttons of the block radi ready for input again.
Note
The individual fields of a radio button group are not passed individually and do not trigger the event AT SELECTION-SCREEN ON par.
Alternative 6
Effect
The event AT SELECTION-SCREEN itself is triggered as the last event of selection screen processing if all the input values were passed to the program. In this event block, all the user inputs can be checked. Sending a warning or an error message in the event block makes all the screen fields ready for input once again.
Alternative 7
... ON { HELP-REQUEST | VALUE-REQUEST } FOR
    {para|selcrit-low|selcrit-high} }
Effect
The two events ON HELP-REQUEST and ON VALUE-REQUEST are triggered at the screen events POH and POV of a selection screen if - for the input field of a parameter para or one of the input fields of a selection criterion selcrit - the field help F1 or the input help F4 was called. Other selection events are not triggered.
In the event blocks, a self-defined field or input field can be programmed, which overrides any helps possibly defined in the ABAP Dictionary.
Notes
These event blocks can only be implemented for fields of the selection screen that are defined in the same ABAP program and not in a possibly linked logical database.
With the events for the field and input help, no data is transported between the selection screen and the ABAP program. As with general screens, suitable function modules must be used for these. The parameters and selection criteria changed for the input help are transported to the selection screen.
Alternative 8
... ON EXIT-COMMAND
Effect
This event is triggered if the user has called one of the functions Back, Exit or Cancel. In the event block, possible clean-up actions can be executed.
Example
In these executable programs, a standard selection screen and a further selection screen are defined. In the event blocks AT SELECTION-SCREEN, the inputs in the selection screens can be specially handled using the name p_carrid and the screen number in sy-dynnr.
REPORT demo_at_selection_screen.
Global data
DATA: sflight_tab TYPE TABLE OF sflight,
      sflight_wa LIKE LINE OF sflight_tab.
Selection screens
PARAMETERS p_carrid TYPE spfli-carrid.
SELECTION-SCREEN BEGIN OF SCREEN 500.
SELECT-OPTIONS s_conn FOR sflight_wa-connid.
DATA s_conn_wa LIKE LINE OF s_conn.
SELECTION-SCREEN END OF SCREEN 500.
Handling selection screen events
AT SELECTION-SCREEN ON p_carrid.
IF p_carrid IS INITIAL.
    MESSAGE 'Please enter a value' TYPE 'E'.
ENDIF.
AUTHORITY-CHECK OBJECT 'S_CARRID'
                      ID 'CARRID' FIELD p_carrid
                      ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
    MESSAGE 'No authorization for carrier' TYPE 'E'.
ELSEIF sy-subrc <> 0.
    MESSAGE 'Error in authority check' TYPE 'A'.
ELSE.
    IF sy-ucomm = 'ONLI'.
      CALL SELECTION-SCREEN '0500'.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF sy-dynnr = '0500'.
    IF s_conn IS INITIAL.
      MESSAGE 'Please enter values' TYPE 'W'.
    ELSE.
      SELECT *
             FROM sflight
             INTO TABLE sflight_tab
             WHERE carrid = p_carrid AND
                   connid IN s_conn.
      IF sy-subrc <> 0.
        MESSAGE 'No flights found' TYPE 'E'.
      ENDIF.
    ENDIF.
ENDIF.
Main program
START-OF-SELECTION.
Reward points if useful
Regards
Anji
Message was edited by:
        Anji Reddy Vangala

Enforcing event AT-SELECTION-SCREEN OUTPUT

Hi Gurus
Does anybody know how to force event AT-SELECTION-SCREEN OUTPUT ?
What I'm aiming for is changing screen somewere outside of this event. For example.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_param.
IF p_param = 'change'.
    changes_in_screen = 'X'.
    *???*   "forcing AT-SELECTION-SCREEN OUTPUT event
ENDIF.
AT-SELECTION-SCREEN OUTPUT.
IF changes_in_screen = 'X'.
    LOOP AT SCREEN.
      "do something
    ENDLOOP.
ENDIF.
I would be grateful for any hints.

One alternative to define two selection screens. First selection screen (default selection screen of report #1000) having Client_type. After user hits execute (F8) then show the second selection screen with corresponding parameters.
PARAMETERS: p_client(1).
SELECTION-SCREEN BEGIN OF SCREEN 9000 AS WINDOW.
PARAMETERS: p_name(20),
            p_lname(20),
            p_cname(20),
            p_oname(20).
SELECTION-SCREEN END OF SCREEN 9000.
AT SELECTION-SCREEN OUTPUT.
CHECK sy-dynnr = '9000'.
* Hide corresponding fields on second selection screen
* based on values of P_CLIENT.
* Also should make key parameters obligatory!
START-OF-SELECTION.
CALL SELECTION-SCREEN 9000 STARTING AT 5 5.
Another alternative is to use a dialog/module pool program to handle this. Such screen field controlling can easily be done in dialog programs because you have full PAI/PBO control, unlike report program selection screen 1000. Unfortunately in a dialog program it is not easy to reproduce the functionality of a select-option.

Selection screen as in MD02 in a custom program

Similar Messages

Maybe you are looking for