Selection Screen search help values based on condition

Hi All,
I am developing this report for HR.And the requirement is in one of the selection screen field the
value's should be appeared(when f4) based on some condition,ie not all values should come.
My field is HRP1001-sobid,here there are many values,they dunt want all that to be shown when user
tries to input the values(F4).And also i need to show the Text for this field(department name) in
search help.
Can anyone please guide...
Thanks in advance.

Hi Salz
You can code your own search help procedure for this. To achieve this, first you should add the block:
<u>e.g.</u>
AT SELECTION-SCREEN ON VALUE REQUEST FOR p_sobid.
Within this block you can use the standard FM "<b>RH_OBJID_REQUEST</b>" to call the standard HR help list for objects conditionally.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Similar Messages

  • Selection screen - search help with dynamic sql query

    hey ,
    is it possible to change the search help of the selection field ?
    when i create the range table i put a data element :
    create a range table that consists of this new data element
      LT_RANGE_TABLE = WD_THIS->M_HANDLER->CREATE_RANGE_TABLE( I_TYPENAME = 'S_CARR_ID' ).
    can i control the search help via the the data element or by other methods ?
    i want that when the user press F4 the values that will show is the result of a sql query that i will write .
    is it possible ?
    thanks
    ASA.

    Hi,
    yes it is possible...
    This is my test code for say personal number select options...
    lt_range_table = wd_this->m_handler->create_range_table(
      i_typename = 'PERSNO' ).
    add a new field to the selection
      wd_this->m_handler->add_selection_field(
      i_id = 'PERSNO'
    I_VALUE_HELP_TYPE = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
    I_VALUE_HELP_ID = 'ZHELP_WDA_PERNR'   "this is the custom search help we need to create
    I_NO_INTERVALS = abap_true
      it_result = lt_range_table
      i_read_only = read_only ).
    do the following:
    1) copy the std function module: F4IF_SHLP_EXIT....to ZF4IF_SHLP_EXIT_pernr (in my case i am testing for pernr so my fm
    name is like that....obviously it can be anything you want...under the recommended naming convention)
    2) look for "STEP SELECT"
    STEP SELECT    (Select values)
    3)write the code as follows:
    "NOTE: this is my testing code...but you can build your logic on it....
    IF CALLCONTROL-STEP = 'SELECT'.
    types: begin of zpri_listing,
    pernr type PERSNO,
    end of zfund_listing.
    DATA: lo_syuname TYPE sy-uname.
    data itab type standard table of Zpri_LISTING.
    data wa type zpri_listing.
        DATA : t_fields LIKE TABLE OF shlp_tab-fielddescr.
        DATA : w_fields LIKE LINE OF shlp_tab-fielddescr.
        DATA : l_fname TYPE dfies-lfieldname.
        IF lo_syuname <> sy-uname.  "means we were here before and ITAB is filled...fm retains its data values...unless refresh happens
    "this if condition make sure that we do not do this select all the time as long as the same user is logged in...
    "a user can press f4 many times...you might want to enhance this logic a little bit more for performance
          lo_syuname = sy-uname.
    ))))))))))))))HERE DO YOUR SELECT(((((((((((((((((((((
    select pernr from "sometable" into table itab.
        ENDIF.
        LOOP AT shlp_tab.
          LOOP AT shlp_tab-fielddescr INTO w_fields.
            l_fname = w_fields-fieldname.
            CALL FUNCTION 'F4UT_PARAMETER_RESULTS_PUT'
              EXPORTING
                parameter               = w_fields-fieldname
              OFF_SOURCE              = 0
              LEN_SOURCE              = 0
              VALUE                   =
               fieldname               = l_fname
              TABLES
                shlp_tab                = shlp_tab
                record_tab              = record_tab
                source_tab              =  itab
              CHANGING
                shlp                    = shlp
                callcontrol             = callcontrol
             EXCEPTIONS
               parameter_unknown       = 1
               OTHERS                  = 2
          ENDLOOP.
        ENDLOOP.
        IF sy-subrc EQ 0.
          callcontrol-step = 'DISP'.
        ELSE.
          callcontrol-step = 'EXIT'.
        ENDIF.
        EXIT. "Don't process STEP DISP additionally in this call.
      ENDIF.
    4) save and activate this function module...
    5) go to se11 and create "Elementary srch hlp"....
    6) fill out all the necessary fields...i am assuming that you already know how to create the search helps...
    look for this field: "Search help exit" and put your function name which you created in the above steps...
    in this example i have: ZF4IF_SHLP_EXIT_pernr....
    7) create and activate the search help....
    hope this helps...i just tested this and it is working for me....
    Thanks..
    AS...

  • Can i have html code for date select options (SEARCH HELP)

    Hi frinds,
    I have a BSP Page with input as date.
    Can i have html code for date select options (SEARCH HELP)
    Moosa

    Hi
    Please find the sample code below.
    FROM DATE
          <htmlb:inputField id        = "dd"
                            width     = "45%"
                            type      = "DATE"
                            showHelp  = "X" <- Search help
                            alignment = "CENTER"
                            maxlength = "10"
                            disabled  = "TRUE"
                            value     = "<%= w_FROMDATE %>" />
    TO DATE
          <htmlb:inputField id        = "dd"
                            width     = "45%"
                            type      = "DATE"
                            showHelp  = "X"
                            alignment = "CENTER"
                            maxlength = "10"
                            disabled  = "TRUE"                      
    value     = "<%= w_TODATE %>" />
    Thanks
    kalyan

  • Search Help values to Internal table

    Dear Friends,
    Is it possible to export Search Help values to Internal table?
    On screen, when user click on Search button, the SAP standard search help will call (Customer Search). After entering values, some result get displayed and this result need to export to the internal table.
    Thanks in stack
    Nilesh

    Hi:
    try this:
    DATA : wa_shlp TYPE shlp_descr,
               it_records LIKE ddshretval OCCURS 0 WITH HEADER LINE.
    wa_shlp-SHLPNAME = 'MAT0M'.   "one of elementary search help name from mara-matnr.
    wa_shlp-SHLPTYPE = 'SH'.
    CALL FUNCTION 'F4IF_SELECT_VALUES'
         EXPORTING
           shlp                   = wa_shlp
      MAXROWS                = 0
      SORT                   = ' '
      CALL_SHLP_EXIT         = ' '
    IMPORTING
      MAXROWS_EXCEEDED       =
        TABLES
      RECORD_TAB             =
      RECDESCR_TAB           =
          return_tab            = it_records
    LOOP AT it_records.
      WRITE:/ it_records.
    ENDLOOP.
    Follows is how to get the search help name:
    CALL FUNCTION 'DD_SHLP_GET_HELPMETHOD'
      EXPORTING
        tabname                 = 'MARA'
        fieldname               = 'MATNR'
        langu                   = sy-langu
      NO_CHKTAB_MAPPING       =
      GET_ENTITYTAB           = ' '
       CHANGING
         shlp                    = wa_shlp
      callcontrol             = callcontrol
      EXCEPTIONS
        field_not_found         = 1
        no_help_for_field       = 2
        OTHERS                  = 3
    CALL FUNCTION 'F4IF_EXPAND_SEARCHHELP'
       EXPORTING
         shlp_top = wa_shlp
       IMPORTING
         shlp_tab = shlps.
    好运,
    启明星

  • Date selection and search help component in jsp

    Hi all:
        In sap portal jsp development enviorment, is it possible to easily program the date selection and search help ( just look like search help in webdynpro ) ?

    Hello Jianhong,
    the easiest way to set a value help is using HTMLB component in your JSP.
    To do it, use next code:
    <hbj:inputField
               id="DateInputField"
               type="date"
               showHelp="TRUE"
               ... other attributes
    />
    Before using HTMLB components in your JSP, don't forget to add this line to your page:
    <%@ taglib uri= "tagLib" prefix="hbj" %>
    regards.
    mz

  • Supress 'Further Selection' And 'Search Help' buttons from LDB selection sc

    Hi,
       How to supress/invisible 'Further Selection' And 'Search Help' buttons from LDB selection screen?
    waiting for reply.
    Shweta.

    Hi,
    1) try to use another version of sel-screen
    2) work with loop at screen:
    LOOP AT SCREEN.
        CASE SCREEN-NAME.
          WHEN 'ANLAGE-LOW' OR 'ANLAGE-HIGH'
          OR '%_ANLAGE_%_APP_%-TEXT'
          OR '%_ANLAGE_%_APP_%-VALU_PUSH'
          OR '%_UNTNR_%_APP_%-TEXT'
           OR 'UNTNR-LOW' OR 'UNTNR-HIGH'
          OR '%_UNTNR_%_APP_%-VALU_PUSH'
           OR 'BEREICH2' OR 'BEREICH3'.
            SCREEN-INVISIBLE = 1.
            SCREEN-INPUT = 0.
            SCREEN-OUTPUT = 0.
          WHEN 'BUKRS-LOW'.
            SCREEN-REQUIRED = 1.
          WHEN OTHERS.
            CONTINUE.
        ENDCASE.
        MODIFY SCREEN.
      ENDLOOP.
    A.

  • Transferring Search Help values from ECC 6.0 to SRM 7.0

    Hi SAP experts,
    I have a requirement to display the search help values for a data element in ECC 6.0 into the custom data element that I created on SRM 7.0.
    Is there a BAPI that I can use to retrieve the values for a search help element (for example SH_ANLKA) from the the ECC into SRM?
    Your advise would be greatly appreciated!
    Regards,
    Andrew

    Hi Andrew,
    I have got a similar requirement to fetch the PO details from ECC search help to a new SRM search help. Please help me with the procedure you used for the above scenario.
    Thanks,
    Santosh.

  • Selection-screen: how to call based on a condition...

    Hello experts,
    can I do this:
    if flag has value, call selection-screen 1 else call selection-screen 2.
    Thanks guys!

    Hi Viraylab,
      Yes u can call the selection-screen based on some condition.
    In this sample of code, if first radio button is chosen then it will call selection-screen 500 and if the second radio button is chosen then it will call selection-screen 1500.
    TABLES : ZOBRENT.
    SELECTION-SCREEN BEGIN OF BLOCK sel1 WITH FRAME TITLE tit1.
    PARAMETERS: R1 RADIOBUTTON GROUP RAD1,
                R2 RADIOBUTTON GROUP RAD1.
    SELECTION-SCREEN END OF BLOCK sel1.
    SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
    SELECTION-SCREEN BEGIN OF BLOCK sel2 WITH FRAME TITLE tit2.
    PARAMETERS: panid like zobrent-zopanid.
    SELECTION-SCREEN END OF BLOCK sel2.
    SELECTION-SCREEN END OF SCREEN 500.
    SELECTION-SCREEN BEGIN OF SCREEN 1500 AS WINDOW.
    SELECTION-SCREEN BEGIN OF BLOCK sel3 WITH FRAME TITLE tit3.
    PARAMETERS: brent LIKE zobrent-zo_brent,
                effdat LIKE zobrent-zo_effdat.
    SELECTION-SCREEN END OF BLOCK sel3.
    SELECTION-SCREEN END OF SCREEN 1500.
    INITIALIZATION.
      tit1 = 'Values'.
    AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD1.
      IF R1 = 'X'.
        CALL SELECTION-SCREEN 500.
      ELSEIF R2 = 'X'.
       CALL SELECTION-SCREEN 1500.
      ENDIF.
    START-OF-SELECTION.
      tit1 = 'Values'.
      tit2 = 'PANID'.
      tit3 = 'BRENT'.
    If found helpful, please do reward.

  • Selection values in query should have help values based on another field

    Hi all,
    I have the following requirement:
    I have a query in which there are the following two filters in the
    selection criteria:
    1. COuntry
    2. State
    Based on the Country selected, the values for the State should come up
    in the Help values in the slection criteria. The user then shall select from these values.
    I plan to use a variable for Country with Replacemetn path as the second query whcih shall have Coutnry and States.
    Is this right or can I do this in a better way? Please suggest.
    Thanks and Regards,
    Srilakshmi B

    Hi,
    See you can achieve this through exit variable.
    Try to create one custom table or try to refer to master data tables may be?
    Custom table need to maintain your master data and need to be referred in below code.
    INCLUDE ZXRSRU01 *
    Enhancement: MultiProvider using InfoProvider Variable
    include YBW_INFOPROVIDER_VARIABLE.
    *& Include YBW_INFOPROVIDER_VARIABLE *
    DATA:
    ls_var TYPE rrs0_s_var_range,
    ls_range TYPE rsr_s_rangesid,
    l_contained TYPE c,
    ls_mapping TYPE ybw_mapping,
    lt_mapping TYPE TABLE OF ybw_mapping.
    Called after variable popup
    IF i_step = 2 AND i_vnam = 'INFOPROV'.
    - 13 -
    Read mapping table
    REFRESH lt_mapping.
    SELECT * FROM ybw_mapping INTO TABLE lt_mapping.
    Process all selection for country variable
    REFRESH e_t_range.
    LOOP AT i_t_var_range INTO ls_var WHERE vnam = 'S_COUNT'.
    Process all mapping rules
    LOOP AT lt_mapping INTO ls_mapping.
    Always fill LOW and HIGH, Otherwise logic below will not work
    IF ls_mapping-high IS INITIAL.
    ls_mapping-high = ls_mapping-low.
    ENDIF.
    Check if selection is contained in the defined InfoProvider
    CLEAR l_contained.
    CASE ls_var-opt.
    WHEN 'EQ'.
    IF ls_var-low BETWEEN ls_mapping-low AND ls_mapping-high.
    l_contained = 'X'.
    ENDIF.
    WHEN 'BT'.
    IF ls_var-low <= ls_mapping-high AND
    ls_var-high => ls_mapping-low.
    l_contained = 'X'.
    ENDIF.
    ENDCASE.
    Add InfoProvider to return table
    Note: Use COLLECT to avoid duplicates
    IF l_contained = 'X'.
    CLEAR ls_range.
    ls_range-sign = 'I'.
    ls_range-opt = 'EQ'.
    ls_range-low = ls_mapping-infoprov.
    COLLECT ls_range INTO e_t_range.
    ENDIF.
    ENDLOOP. " lt_mapping
    ENDLOOP. " i_t_var_range
    EXIT.
    ENDIF.
    Thanks and regards

  • To populate another alv grid's field with value selected from search help

    Hi,
    I have two fields in alv grid, first column holds code and the second one holds code's description. Also I have a search help includes these two fields. The search help is attached to the first column. The requirement is, when I select a code from the search help, second column should be populated with selected code's description.
    Any help will be appreciated. Thanks..

    Hi,
    have a look into Report: BCALV_EDIT_03.
    Regards, Dieter

  • Search Fields value based on the input.

    Hi Experts,
    I was trying to develop a web dynpro with two  input-fields and process the logic based on the input-fields.
    The scenario is,have two Input fields, the value for the first input-field a static search help is assigned and for the second input-field the value are populated on the based of the values selected in the first input-fields.
    so here the values for second input-field depends on the first input-field.
    Please put in your thoughts or suggestion for the scenario.
    Thanks
    Best Regards,
    Lalitkumar.
    Moderator message: wrong forum, please post again in Webdynpro forum.
    Edited by: Thomas Zloch on Jul 9, 2010 1:36 PM

    Please refer the following for achieving the same.
    http://wiki.sdn.sap.com/wiki/display/Snippets/OVSsearchhelp

  • AT SELECTION SCREEN OUTPUT ON VALUE REQUESt problem

    hi I am fetching the values into second field based on first field by reading them like this
    <b>
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR ST_NAME.
      CLEAR: FIELD_VALUE, DYNPRO_VALUES.
      REFRESH DYNPRO_VALUES.
      FIELD_VALUE-FIELDNAME = 'EXCH'.
      APPEND FIELD_VALUE TO DYNPRO_VALUES.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          DYNAME             = SY-CPROG
          DYNUMB             = SY-DYNNR
          TRANSLATE_TO_UPPER = 'X'
        TABLES
          DYNPFIELDS         = DYNPRO_VALUES.
      READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
      IF FIELD_VALUE-FIELDVALUE IS NOT INITIAL.
        IF SY-SUBRC = 0 AND FIELD_VALUE-FIELDVALUE = 1.
          FIELD_VALUE-FIELDVALUE = 'BSE'.
        ELSEIF SY-SUBRC = 0 AND FIELD_VALUE-FIELDVALUE = 2.
          FIELD_VALUE-FIELDVALUE = 'NSE'.
        ENDIF.
        SELECT STOCK ST_NAME
                       FROM
                       ZEXCH
                       INTO TABLE TEMP_ITAB
                       WHERE EXCH = FIELD_VALUE-FIELDVALUE.
        IF SY-SUBRC = 0.
          FLAG = 'X'.
        ENDIF.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            RETFIELD    = 'ST_NAME'
            DYNPPROG    = SY-CPROG
            DYNPNR      = SY-DYNNR
            DYNPROFIELD = 'ST_NAME'
            VALUE_ORG   = 'S'
          TABLES
            VALUE_TAB   = TEMP_ITAB.
      ENDIF.
    </b>
    This is working fine, now my requirement is to fetch a value into 3rd field from database table when the user selects a value through 'F4IF_INT_TABLE_VALUE_REQUEST'
    Please help me with this, hope u got my problem, i want to know how to continue and fill value into third field after filling the field ST_NAME
    points guaranteed

    Hi,
    If you have two parameters, you want to display values(f4) in parameter 2 
    depending on the values entered in parameter 1.
    REPORT Z_SRI_HELP_VALUE_FOR_TABLES .
    tables tcurt.
    DATA   DYFIELDS LIKE DYNPREAD OCCURS 1 WITH HEADER LINE.
    PARAMETERS: P_WAERS LIKE TCURT-WAERS,        "Currency
                P_LTEXT LIKE TCURT-LTEXT,        "Long Text
                P_KTEXT LIKE TCURT-KTEXT.        "Short Text
    *--- Example of updating value of another field on the screen -
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_WAERS.
      CLEAR: DYFIELDS[], DYFIELDS.
    *--- select currency
      CALL FUNCTION 'HELP_VALUES_GET'
           EXPORTING
                fieldname        =  'WAERS'
                tabname          =  'TCURT'
           IMPORTING
                SELECT_VALUE     =   P_WAERS.
    *--- get long text for the selected currency
      SELECT SINGLE LTEXT FROM TCURT
        INTO DYFIELDS-FIELDVALUE
        WHERE SPRAS = SY-LANGU
        AND   WAERS = P_WAERS.
      IF SY-SUBRC <> 0.
        CLEAR DYFIELDS-FIELDVALUE.
      ENDIF.
    *--- update another field
      DYFIELDS-FIELDNAME = 'P_LTEXT'.
      APPEND DYFIELDS.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
           EXPORTING
                DYNAME               = SY-CPROG
                DYNUMB               = SY-DYNNR
           tables
                dynpfields           = DYFIELDS .
    *--- Example of reading value of another field -
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_KTEXT.
    *--- read another field
      CLEAR: DYFIELDS[], DYFIELDS.
      DYFIELDS-FIELDNAME = 'P_WAERS'.
      APPEND DYFIELDS.
      CALL FUNCTION 'DYNP_VALUES_READ'
           EXPORTING
                DYNAME                   = SY-CPROG
                DYNUMB                   = SY-DYNNR
           TABLES
                DYNPFIELDS               = DYFIELDS .
      READ TABLE DYFIELDS INDEX 1.
    *--- get short text and update current field
      SELECT SINGLE KTEXT FROM TCURT
        INTO P_KTEXT
        WHERE SPRAS EQ SY-LANGU
        AND   WAERS EQ DYFIELDS-FIELDVALUE.
    How to add F4 functionality to a paramter variable?  Say P_name ie Parameters: P_name like dbtab-fieldname
    in At selection-screen on value-request for p_name.  How should I add the values john, abraham, linga etc so that these values appear when f4 is pressed on the field in the selection screen?
    PARAMETERS: p_name(10).
    DATA: BEGIN OF value_tab OCCURS 0,
                   name(10),
                 END OF value_tab.
    DATA :field_tab LIKE dfies  OCCURS 0 WITH HEADER LINE.
    DATA : return_tab LIKE ddshretval OCCURS 0 WITH HEADER LINE. DATA : x TYPE string.
      AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_name.
      REFRESH value_tab[].
      REFRESH field_tab[].
      REFRESH return_tab[].
        field_tab-fieldname = 'ERNAM'.
      field_tab-tabname = 'VBAK'.
      APPEND field_tab.
        value_tab-name = 'John'.
      APPEND value_tab.
      value_tab-name = 'Abraham'.
      APPEND value_tab.
      value_tab-name = 'Lingam'.
      APPEND value_tab.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = field_tab-fieldname
        TABLES
          value_tab       = value_tab
          field_tab       = field_tab
          return_tab      = return_tab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc = 0.
        p_name = return_tab-fieldval.
      ENDIF.
    Regards
    Sudheer

  • (Urgent) Sorting search help values in Web Report

    Hello Friends,
    We have a web report which uses a variable made on 0CALMONTH. The order of display of values for this variable search help is 02/2004, 03/2004, 01/2005, 07/2006, 08/2006, 05/2007. In this order we have the latest date (05/2007) displayed at the end of the list. What we want is that the values in the search help of 0CALMONTH should be displayed in the reverse order i.e. latest date first (05/2007, 08/2006, 07/2006... etc).
    Thanks in advance for your assistance.
    Regards,
    Prem.

    Hi Premanand,
    If u display the report in Internet Explorer there you can see differnet buttons like
    Save View, Book mark, Variable Screen etc...There click Save View give tech name and descryption. After Sorting use this in WAD instead selecting query , select this view and execute.
    Assign Points Pls...
    Best Regards,
    SG

  • Selection-screen: Input help for VTWEG

    Hello!
    Can anybody help me with the following problem:
    I have two select-options (VKORG and VTWEG) on my selection screen. Now there should be the possibility to restrict the values shown as input help for VTWEG after having selected a value for VKORG.
    I've already tried to do this by using a matchcode object but for VKORG and VTWEG I was not able to find suitable search helps.
    In my opinion this should be possible without using the "AT SELECTION-SCREEN ON VALUE-REQUEST FOR ...". If not, it would be interesting to getting to know your approaches to this task.
    Thank you in advance!

    you can refer to the following code
    and you can write the code in the same way as per your requirement
    *& Report  ZRKTEST5                                                    *
    REPORT  ZRKTEST5                                .
    DATA: PROGNAME TYPE SY-REPID,
          DYNNUM   TYPE SY-DYNNR,
          DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
          FIELD_VALUE LIKE LINE OF DYNPRO_VALUES.
    DATA: BEGIN OF T_T001L OCCURS 0,
            WERKS TYPE WERKS_D,
            LGORT TYPE LGORT_D,
          END OF T_T001L.
    DATA: V_WERKS TYPE WERKS_D,
          V_LGORT TYPE LGORT_D.
    SELECTION-SCREEN BEGIN OF BLOCK B1.
      PARAMETERS: P_PLANT LIKE MSEG-WERKS,
                  P_STOLOC LIKE MSEG-LGORT.
    SELECTION-SCREEN END OF BLOCK B1.
    INITIALIZATION.
      PROGNAME = SY-REPID.
      DYNNUM = SY-DYNNR.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_STOLOC.
      CLEAR: FIELD_VALUE, DYNPRO_VALUES. REFRESH DYNPRO_VALUES.
      FIELD_VALUE-FIELDNAME = 'P_PLANT'.
      APPEND FIELD_VALUE TO DYNPRO_VALUES.
      CALL FUNCTION 'DYNP_VALUES_READ'
           EXPORTING
                DYNAME             = PROGNAME
                DYNUMB             = DYNNUM
                TRANSLATE_TO_UPPER = 'X'
           TABLES
                DYNPFIELDS         = DYNPRO_VALUES.
      READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
      SELECT WERKS LGORT INTO TABLE T_T001L FROM T001L WHERE WERKS = FIELD_Value-fieldvalue.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
                RETFIELD    = 'P_STOLOC'
                DYNPPROG    = PROGNAME
                DYNPNR      = DYNNUM
                DYNPROFIELD = 'P_STOLOC'
                VALUE_ORG   = 'S'
           TABLES
                VALUE_TAB   = T_T001L.
    START-OF-SELECTION.
      WRITE:/ 'TEST F4 PROGRAM'.
    END-OF-SELECTION.
    <b></b>
    reward points if helpfull
    Regards
    Vikure

  • Select-Options search help with where

    Hi Experts,
    I need to have a search help in my selection screen with a Where clause.
    I've tried to search it but I cant find answers.
    The logic is like this, wherein the search help for my selection screen should just have the value PM001 and ZMIS.
    SELECT-OPTIONS stsma estat tj30 FOR  s_eqpstt FOR tj30t-estat WHERE stsma = 'PM001' and stsma = ZMIS.
    Thanks

    Sorry, a little more detail... create a view, of search help type, with the columns you present and restrict those two values. Then create the search help with that view. Then add the search help to the select-option.
    Regards,
    Edgar

Maybe you are looking for