Sem_init is not working on Mac OSX 10.6.4(Snow Leopard)

I am writing code that will solve readers writers problem but when i use sem_init to initialise unnamed semaphore,
it returns -1 my code is
sem_t sem;
main()
     int ret;
     ret = sem_init(&sem, 0, 1);
     printf("Return %d\n", ret);
Is there any mistake with my code please let me know.If not provide me with suggestions to solve this problem?

@etresoft Thanks. I get my solution by sem_unlink before sem_init or sem_open
But why mac developers had done such unimplemented stuff. It becomes difficult to even get one simple
example to understand the concept or to get started?

Similar Messages

Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?

lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?

biomecasport,
Welcome to Apple Discussions.
1. Insert the Leopard Installation disk into the computer.
2. The disk will appear on the desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version.

X11 not working on Mac OSX 10.4.11

The Mac OS X version is 10.4.11
X11 opens and then automatically shuts down.
I tried the following already with no luck:
Installed x11 from the Mac OSX Tiger DVD.
Installed using the instructions on [url="http://roundhere.net/journal/install-x11-on-mac-os-x-10-4-tiger-without-d vd/"]this[/url] website.
Installed the X11 2006 update from [url="http://support.apple.com/downloads/X11Update_2006_1_13"]here[/url].
None of them worked. X11 still closes automatically after opening it.
Any thoughts?

Imperial:
I have two units running 10.4.11, one of them I downloaded X11 from Apple and the other I checked off install X11 when I upgraded to 10.4.11 not too long ago. I just checked both of them for launching X11, thinking there was something about the window opening and then closing before opening, but they both just opened. Did you run "repair permissions" after you installed the '06 update? or did you restart the computer after installing? Don't know, but something isn't right. Perhaps try to re-install, but run repair permission before and after if you haven't already done that.
e.e.p.

Logitech C910HD webcam not working in Mac OSX 10.6.6

I'm currently using Mac OSX 10.6.6 and flash 10.1.102.64. My problem occurs in the most recent versions of Safari, Firefox, and Chrome. I am able to select my cam by exact name in the settings for video and as an unknown usb device for audio with its built in microphone (the volume bar shows activity instantly). Launching the webcam (on the 5-6 sites I attempted) just creates a blank white image. The webcam works fine in all non-flash applications I tried. My lower quality 10 year old firewire cam still works fine in flash. Logitech is telling me this is an Adobe issue. Any ideas?

Hi, I remember another user having an issue with the C910HD and don't know if it was resolved or not. I just had a note about upgrading to HQ.
This is a link to Logitech's Forum:
http://forums.logitech.com/t5/Webcams/bd-p/quickcam_software
I don't use a webcam so can't be too much help. Hopefully another user will respond to your thread.
If you can see videos on youtube, than that is an indicator that Flash Player is Installed and working.
You can also use the Search Forum feature at the top right of the Flash Player forum and perhaps find some threads with the same issue.
Thanks,
eidnolb

Photo Mechanic 4.6.9 Not Working With Mac OSX

I have Mac OS 10.4.11, and suddenly Photo Mechanic 4.6.9 stopped opening a few hours ago. Last night it worked and this morning suddenly the shortcut icon disappeared and when I try to open from applications folder I get message saying this application cannot be used with Mac OSX! I need to use this application for work so I really need to get this working. Help!

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Also, could it have possibly auto updated to a later version?

File upload not working on Mac OSX

I've tried several of the Flex file upload components, in all
cases they don't work correctly when used on a Mac. I've tested
both flash player 9 and the latest 10 release. The file uploads to
the server, but the progress bar doesn't update and the upload
complete event never fires. To the end user, it looks like the app
isn't doing anything at all!
Any advice on how to get this working? If you know of any
file upload components that are already tested and working on the
Mac version of flash - that would be a great help as well!
Thanks!

If you Google it you will find that this is a known issue, it surprised me since I spent days looking at my code.
I found possible solutions here, but none worked for me it seems that it worked for many other people.
http://www.abdulqabiz.com/blog/archives/2006/06/09/workaround-filereference-oncomplete-is- not-fired-on-mac-os/
Hope Mac and Adobe will have lunch one day and figure it out.
Ben

Bookmark Open File Action not working on MAC OSX

We are getting the following error when trying to open different files that start find in Finder:
could not find an application to open the file 'xxxxx'
We tried a simple MAC OS Application.app file, a terminal app script and in both cases we get the above error. These same files start up without issue on a click in Finder.
The Open File action "DOES" work on an Microsoft Office File... but does not work for a Mac Application.App file or a AppleScript script file.
Can anyone share how to get Open File to work with some type of script file or application file on the MAC OS with Adobe Reader 11 ?

We ended up having to create an App on the MAC OS with an "associated" file type and then use the Bookmark Open File Action on files of that type. This followed what worked for opening Office files on the MAC from the Bookmark Open File Action.
My question was ... on Windows we could use the Bookmark Open File Action to open up "applications" or "bat scripts" directly... but this does not appear to be supported on the MAC. We could not "start" an app or a script directly from the Bookmark Open File Action. We had to set the action to open a file and then handle that file in the associated application we created for that filetype on the MAC.
Thank you for your question,
James

Why does my DVI to S Video adapter not work on my Macbook Pro since installing Snow Leopard?

The Apple DVI to S Video Adapter worked before installing Snow Leopard. Now I just get a blue screen.

.wpl appears to be a Windows Media Player playlist. I can find no conversion software for that, and Windows Media Player is not available for Mac anymore.
If you can persuade him to download iTunes and create the playlist as mp3 in a iTunes playlist, or even just burn the base mp3 files to CD as a data disc, that's about the only solutions I can suggest.

Latest version that will work with Mac mini Core SOLO under Snow Leopard?

Latest Flash Player 11 versions will work with Snow Leopard, but they say they require a Core Duo or newer processor. What is the last stable version of FP that will work on my mom's Mac mini 1.5Ghz Intel Core Solo (running OS X 10.6.8)?
Have searched archives and web for this and still draw a blank. Thanks!

Fixed it!
I mounted it in target mode again and manually applied the 10.5.4 combo updater ad it now boots again.

Wifi 5ghz and NAS using AFP not working in lion but no problem in snow leopard.

After I upgrade to lion the first thing I discover is my wifi fail to connect to the N 5ghz from my time capsule. It use to be no issue when I'm on snow leopard. Even my iPad connect 5ghz with no problem.
The next problem I found is, I can't connect to my NAS even I using AFN. Same no issue in snow leopard.
Wonder is it due to upgrade rather then fresh installation? Will do a fresh installation in my another Mac this weekend and see if facing the same problem or not.

I know this is an old thread but the problem is 802.11d which disables certain channels based on the first beacon the Wi-Fi sees when you wake up your Mac.
You need to set the 5GHz channel on your Time Capsule to a channel that is supported in all domains like 36 or 40. More info here: http://jeff-with-a-g.blogspot.com.au/2012/04/5ghz-wifi-on-your-mac-got-you-down. html

'Open Recent' Not Working In FCP 6 Since Updating To Snow Leopard

Yes, I new I shouldn't of updated to Snow Leopard until they ironed out some wrinkles first, oh well.....
Anyway, I have noticed since updating the 'Open Recent' doesn't seem to work In my FCP 6, I remember Logic Pro doing the same thing a few years back and the word was to bin some kind of preference file?
Any ideas, Cheers

Instructions for Final Cut Pro 6. This might have changed in FCP 7.
Deleting FCP Preferences:
Open a Finder window. Set the view mode to columns:
Click the house icon that has your name next to it.
Click the folder "Library" in the next column.
Find and click the folder "Preferences" in the next column.
Find and click the folder "Final Cut Pro User Data" in the next column.
Move the files "Final Cut Pro 6.0 Prefs", "Final Cut Pro Obj Cache" and "Final Cut Pro Prof Cache" to the Trash and empty it.
When you have a stable set of preference files, download [Preference Manager|http://www.digitalrebellion.com/pref_man.htm] to back them up. If you have further problems, the backup can be recalled and you can continue working.

Hp laserjet 100 color mfp m175nw not working anymore – MAC OSX YOSEMITE

After installing the YOSEMITE update my hp laserjet 100 color mfp m175nw not printing anymore. Connection is USB. And OSX Drivers are all up-to-dae. Also i heared similar problems with other printers than HP.
Any help? Thanks alot.

Hi @Ankanb ,
I understand that you are having issues since the Apple Security Update was done on the computer, after uninstalling and reinstalling the software, you can't find the printer now. I would be happy to help you.
I have provided some steps to try, to see if we get the printer working again over the network.
Print a Configuration page to see if the printer still has a valid IPv4 address.
Printing a Configuration Report.
If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Safari)
Did it load the webpage?
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
If you are having network issues, then add the printer through the IP Protocol.
After clicking the + button, select the IP icon across the top, type in the printer's IP address, select jet direct below and then Apply. (you won't be able to scan but you will be able to print, this way we will know if it is a Multicasting issue, if the Mac sees the printer)
If the Multicasting is turned off on the router, you won't be able to add the printer as a bonjour device.
Test the printer.
How is the printer connected? (Ethernet/Wireless)
If there is anything else I can help you with, just let me know.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

App store not working on mac osx 10.9

my mac pro is running on osx 10.9. it has app store version is 1.3. Am not getting updates on app store. it simply showing loading animation & stops it. what to do with this?

Quit Appstore by clicking on App Store from the top Menu Bar and then Quit. Click any where on your Desktop and you should see Finder next to the Apple Logo on the Top Menu Bar, From the Menu Bar click on Go and select the option Go To Folder and Write or Copy the following in the box that appears, without brackets ( ~/Library/Preferences/ ). Look for the File Named "com.apple.storeagent.plist" and "com.apple.appstore.plist" and drag them on the Desktop and try to open App Store and see if it works.

FlashPlayer 9.0.28 not working on MAC OSX

Downloaded FP 9.0.28.0 to Power PC Mac running OSX 10.4.8.
Now instead of the displays and frames I get merely a QuickTime
logo displayed with a question mark "?" in the center. Popup
blocker is disabled. The download center claims that Safari and
Firefox are supported, which are the browsers I use. I followed
directions. What's going on?
As far as I can tell, there's no way to reach Adobe by any
electronics means and their FAQ does not seem to address this
issue.

We ended up having to create an App on the MAC OS with an "associated" file type and then use the Bookmark Open File Action on files of that type. This followed what worked for opening Office files on the MAC from the Bookmark Open File Action.
My question was ... on Windows we could use the Bookmark Open File Action to open up "applications" or "bat scripts" directly... but this does not appear to be supported on the MAC. We could not "start" an app or a script directly from the Bookmark Open File Action. We had to set the action to open a file and then handle that file in the associated application we created for that filetype on the MAC.
Thank you for your question,
James

HP LASERJET SERIES 1200 ( EXTRA FEATURES NOT WORKING WITH MAC OSX 10.10)

I presently have a HP LASERJET PRINTER 1200 SERIES that I had been using my APPLE MAC.
The MAC OS was upgraded recently to Yosmite MAC 10.10
I can still print.... however the extra features as double sided printing is lost.
I have tried reloading the drivers - no luck.
Is it possible to post the exact steps that I should follow on my MAC - in order to load the full HP 1200 series features.
My partner is using Windows 7 PC and his driver is able to work with the full features.
HP Laserjet printer 1200 series PLC 5 driver.
Extra information:
I am access my printer over home wireless network - using my Apple Air device.

This printer supports basic functionality out of the box with Mac OS X 10.10 Yosemite. It's possible you can get more features for your device by installing the 3rd party Gutenprint drivers for Mac OS X. You can download this free driver here: http://gimp-print.sourceforge.net/MacOSX.php.
I am an HP employee.
Opinions expressed are mine and do not necessarily reflect the opinions of HP.
Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

Sem_init is not working on Mac OSX 10.6.4(Snow Leopard)

Similar Messages

Maybe you are looking for