FlashPlayer 9.0.28 not working on MAC OSX

Downloaded FP 9.0.28.0 to Power PC Mac running OSX 10.4.8.
Now instead of the displays and frames I get merely a QuickTime
logo displayed with a question mark "?" in the center. Popup
blocker is disabled. The download center claims that Safari and
Firefox are supported, which are the browsers I use. I followed
directions. What's going on?
As far as I can tell, there's no way to reach Adobe by any
electronics means and their FAQ does not seem to address this
issue.

We ended up having to create an App on the MAC OS with an "associated" file type and then use the Bookmark Open File Action on files of that type.  This followed what worked for opening Office files on the MAC from the Bookmark Open File Action.
My question was ... on Windows we could use the Bookmark Open File Action to open up "applications" or "bat scripts" directly... but this does not appear to be supported on the MAC.  We could not "start" an app or a script directly from the Bookmark Open File Action.  We had to set the action to open a file and then handle that file in the associated application we created for that filetype on the MAC.
Thank you for your question,
James

Similar Messages

  • Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?

    lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?

    biomecasport,
    Welcome to Apple Discussions.
    1. Insert the Leopard Installation disk into the computer.
    2. The disk will appear on the desktop.
    3. Double click on the "Optional Installs" folder.
    4. Double click on the "Optional Installs.mpkg."
    5. Click on (Continue) in Introduction.
    6. Click on (Continue) in Software License Agreement.
    7. Click on (Agree) to agree to the terms of the software license agreement.
    8. Click on the disclosure arrow ▶ next to Applications.
    9. Select (✓) iCal.
    10. Click (Continue).
    11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version.

  • X11 not working on Mac OSX 10.4.11

    The Mac OS X version is 10.4.11
    X11 opens and then automatically shuts down.
    I tried the following already with no luck:
    Installed x11 from the Mac OSX Tiger DVD.
    Installed using the instructions on [url="http://roundhere.net/journal/install-x11-on-mac-os-x-10-4-tiger-without-d vd/"]this[/url] website.
    Installed the X11 2006 update from [url="http://support.apple.com/downloads/X11Update_2006_1_13"]here[/url].
    None of them worked. X11 still closes automatically after opening it.
    Any thoughts?

    Imperial:
    I have two units running 10.4.11, one of them I downloaded X11 from Apple and the other I checked off install X11 when I upgraded to 10.4.11 not too long ago. I just checked both of them for launching X11, thinking there was something about the window opening and then closing before opening, but they both just opened. Did you run "repair permissions" after you installed the '06 update? or did you restart the computer after installing? Don't know, but something isn't right. Perhaps try to re-install, but run repair permission before and after if you haven't already done that.
    e.e.p.

  • File upload not working on Mac OSX

    I've tried several of the Flex file upload components, in all
    cases they don't work correctly when used on a Mac. I've tested
    both flash player 9 and the latest 10 release. The file uploads to
    the server, but the progress bar doesn't update and the upload
    complete event never fires. To the end user, it looks like the app
    isn't doing anything at all!
    Any advice on how to get this working? If you know of any
    file upload components that are already tested and working on the
    Mac version of flash - that would be a great help as well!
    Thanks!

    If you Google it you will find that this is a known issue, it surprised me since I spent days looking at my code.
    I found possible solutions here, but none worked for me it seems that it worked for many other people.
    http://www.abdulqabiz.com/blog/archives/2006/06/09/workaround-filereference-oncomplete-is- not-fired-on-mac-os/
    Hope Mac and Adobe will have lunch one day and figure it out.
    Ben

  • Logitech C910HD webcam not working in Mac OSX 10.6.6

    I'm currently using Mac OSX 10.6.6 and flash  10.1.102.64. My problem occurs in the most recent versions of Safari, Firefox, and Chrome. I am able to select my cam by exact name in the settings for video and as an unknown usb device for audio with its built in microphone (the volume bar shows activity instantly). Launching the webcam (on the 5-6 sites I attempted) just creates a blank white image. The webcam works fine in all non-flash applications I tried. My lower quality 10 year old firewire cam still works fine in flash. Logitech is telling me this is an Adobe issue. Any ideas?

    Hi, I remember another user having an issue with the C910HD and don't know if it was resolved or not. I just had a note about upgrading to HQ.
    This is a link to Logitech's Forum:
    http://forums.logitech.com/t5/Webcams/bd-p/quickcam_software
    I don't use a webcam so can't be too much help. Hopefully another user will respond to your thread.
    If you can see videos on youtube, than that is an indicator that Flash Player is Installed and working.
    You can also use the Search Forum feature at the top right of the Flash Player forum and perhaps find some threads with the same issue.
    Thanks,
    eidnolb

  • Photo Mechanic 4.6.9 Not Working With Mac OSX

    I have Mac OS 10.4.11, and suddenly Photo Mechanic 4.6.9 stopped opening a few hours ago.  Last night it worked and this morning suddenly the shortcut icon disappeared and when I try to open from applications folder I get message saying this application cannot be used with Mac OSX!  I need to use this application for work so I really need to get this working.  Help!

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Also, could it have possibly auto updated to a later version?

  • Bookmark Open File Action not working on MAC OSX

    We are getting the following error when trying to open different files that start find in Finder:
    could not find an application to open the file 'xxxxx'
    We tried a simple MAC OS Application.app file, a terminal app script and in both cases we get the above error.  These same files start up without issue on a click in Finder.
    The Open File action "DOES" work on an Microsoft Office File... but does not work for a Mac Application.App file or a AppleScript script file.
    Can anyone share how to get Open File to work with some type of script file or application file on the MAC OS with Adobe Reader 11 ?

    We ended up having to create an App on the MAC OS with an "associated" file type and then use the Bookmark Open File Action on files of that type.  This followed what worked for opening Office files on the MAC from the Bookmark Open File Action.
    My question was ... on Windows we could use the Bookmark Open File Action to open up "applications" or "bat scripts" directly... but this does not appear to be supported on the MAC.  We could not "start" an app or a script directly from the Bookmark Open File Action.  We had to set the action to open a file and then handle that file in the associated application we created for that filetype on the MAC.
    Thank you for your question,
    James

  • HP LASERJET SERIES 1200 ( EXTRA FEATURES NOT WORKING WITH MAC OSX 10.10)

    I presently have  a HP LASERJET PRINTER 1200 SERIES that I had been using my  APPLE  MAC.
    The MAC OS was upgraded recently to  Yosmite  MAC 10.10
    I can still print.... however the  extra features as  double sided printing  is lost.
    I have tried reloading the drivers - no luck.
    Is it possible to post the exact steps that I should follow on my MAC - in order to load the full   HP 1200 series features.
    My partner is using  Windows 7 PC and his driver is able to work with the full features.
    HP Laserjet printer 1200 series PLC 5 driver.
    Extra information:
    I am access my printer over home wireless network - using my Apple Air device.

    This printer supports basic functionality out of the box with Mac OS X 10.10 Yosemite.  It's possible you can get more features for your device by installing the 3rd party Gutenprint drivers for Mac OS X.  You can download this free driver here: http://gimp-print.sourceforge.net/MacOSX.php.
    I am an HP employee.
    Opinions expressed are mine and do not necessarily reflect the opinions of HP.
    Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

  • Hp laserjet 100 color mfp m175nw not working anymore – MAC OSX YOSEMITE

    After installing the YOSEMITE update my hp laserjet 100 color mfp m175nw not printing anymore. Connection is USB. And OSX Drivers are all up-to-dae. Also i heared similar problems with other printers than HP.
    Any help? Thanks alot.

    Hi @Ankanb ,
    I understand that you are having issues since the Apple Security Update was done on the computer, after  uninstalling and reinstalling the software, you can't find the printer now.  I would be happy to help you.
    I have provided some steps to try, to see if we get the printer working again over the network.
    Print a Configuration page to see if the printer still has a valid IPv4 address.
    Printing a Configuration Report.
    If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
    Type the IP address into your web browser's address bar. (Safari)
    Did it load the webpage?
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
    If you are having network issues, then add the printer through the IP Protocol.
    After clicking the + button, select the IP icon across the top, type in the printer's IP address, select jet direct below and then Apply. (you won't be able to scan but you will be able to print, this way we will know if it is a Multicasting issue, if the Mac sees the printer)
    If the Multicasting is turned off on the router, you won't be able to add the printer as a bonjour device.
    Test the printer.
    How is the printer connected?  (Ethernet/Wireless)
    If there is anything else I can help you with, just let me know.
    Have a nice weekend!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Canon pixma mp500 scanner not working with mac osx 10.6.8

    I'm having difficulty using my scanner. I've updated the Canon driver with the most recent version. It recoginises the printer/scanner but won't import image. Has anyone had a similar issue and successfully resolved it?

    duncan, I've got an MX 880 series all in one printer, and have the same issue.  A work around that I use is to select "e-mail" the scanned item. The scanned item is then inserted into an e-mail format where I can choose to download/save the scanned document into whatever folder I want.  This was the only expedient method I could find.  The Canon software capability between some of their newer printers and Mac operating systems is not totally compatible. For example, sometimes the top half of a line of text gets printed on one page, and the bottom half of the line gets printed on the ensuing page.  Doesn't happen often, but it is annoying.
    Wuz

  • Why are the adjustment layers in my actions not working? (mac osx)

    I've just 'upgraded' to CC, and noticed that actions that alter Curves or levels adjustment layers do not play back correctly.
    The Action itself contains the right steps but nothing happens to the adjustment or the image. I use this a lot for my work and I really need some help
    I have a mac 10.7

    Are these actions you recorded in a previous version of photoshop?
    Did you try recording the action(s) in photoshop cc?
    Have you installed the 14.1.1 update for photoshop cc?
    Does it make any difference if you disable the Generator plugin under Photoshop>Preferences>Plug-Ins>Enable Generator?

  • Android File Transfer not working with MAC OSX 10.9.5

    I have a Kurio Extreme for my child, and I have downloaded and used Android File Transfer in the past. Recently two things have changed. My OS, and the Kurio tablet. I attempted to use it today, and the device is not recognized.
    I reached out to the Kurio Helpdesk and they state that the issue is either with the OS software or AFT. I have removed AFT, rebooted the computer, downloaded it again, all to no avail.
    Any ideas on how to fix this issue?

    This problem could arise if you have installed Kies. What it does is, it installs drivers which is not compatible with android file transfer app.
    Now the solution for this problem is properly uninstall kids from your mac, to do this follow the steps:
    1. Check the security and privacy settings in your system preference whether the settings for "Allow apps download from" to "Anywhere" (to set this first click the lock button on the left of your screen by entering your password, this will enable the option to be changed)
    2. After you are done with the first step open the kies installation file (file that is used to install kies, if you have deleted the file, download it again) open the file there you will find an option "uninstall". Click and follow the instruction.
    3. When you have successfully deleted the app, restart your mac.
    4. Install Android file transfer app if you haven't done it yet.
    5. Connect your android device
    6. BANG! It will work just fine. Hope it helps!!

  • App store not working on mac osx 10.9

    my mac pro is running on osx 10.9. it has app store version is 1.3.  Am not getting updates on app store. it simply showing loading animation & stops it. what to do with this?

    Quit Appstore by clicking on App Store from the top Menu Bar and then Quit. Click any where on your Desktop and you should see Finder next to the Apple Logo on the Top Menu Bar, From the Menu Bar click on Go and select the option Go To Folder and Write or Copy the following in the box that appears, without brackets ( ~/Library/Preferences/ ). Look for the File Named "com.apple.storeagent.plist" and "com.apple.appstore.plist" and drag them on the Desktop and try to open App Store and see if it works.

  • Finder is not working properly mac osx 10.8.4

    Hello,
    Just recently Finder has stopped behaving as it normally would. Clicking the icon doesn't seem to launch the finder window. I have to right click the finder icon and then click New Finder Window. Sometimes there is no response for sometime and then finally it does open a window.
    Can anybody please help me out?
    thanks
    Sonny

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Optimum app not working in Mac OSX 10.8

    I just downloaded the Optimum app which uses Sliverlight. It does not open or let me log in. Whenever i open the Optimum app for streaming live tv it just opens up on a blank screen. When I quit it I get this error message:
    I have installed latest version sliverlight and have rebooted my computer. I have called Optimum and they said that there is something wrong with my computer. Please let me know how I can fix this issue. Thanks
    Process:         Silverlight [1653]
    Path:            /Applications/Optimum.app/Contents/MacOS/Silverlight
    Identifier:      914208894.optimumapp.iptv.optimum.net
    Version:         1.0
    Code Type:       X86 (Native)
    Parent Process:  launchd [194]
    User ID:         501
    Date/Time:       2013-05-19 23:06:09.897 -0400
    OS Version:      Mac OS X 10.8.3 (12D78)
    Report Version:  10
    Interval Since Last Report:          22228 sec
    Crashes Since Last Report:           19
    Per-App Crashes Since Last Report:   18
    Anonymous UUID:                      77A805F2-80D2-B70F-9D69-FBDA50B7FEB6
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000013
    VM Regions Near 0x13:
    --> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL  /Applications/Optimum.app/Contents/MacOS/Silverlight
        __TEXT                 0000000000001000-0000000000009000 [   32K] r-x/rwx SM=COW  /Applications/Optimum.app/Contents/MacOS/Silverlight
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   914208894.optimumapp.iptv.optimum.net          0x000032ae -[SLLauncherWindow fireClosingEvent:] + 58
    Logical CPU: 2
    8-E87E-3511

    Ok so I called up Optimum and they told me that they will have the engineers look at the issue.
    Yesterday, I got a call back from Optimum.  Apparently, a number of Mac users were affected by the new update.  They have fixed the issue and will be updating the app soon.  Below is an updated version of the app that was emailed to me by Optimum (make sure to uninstall the previous version before installing this):
    https://www.yousendit.com/dl?phi_action=app/orchestrateDownload&rurl=https%253A% 252F%252Fwww.yousendit.com%252Ftransfer.php%253Faction%253Dbatch_download%2526se nd_id%253D2165329944%2526email%253D74180eefa3f469865d476c1088951734&s=19104&cid= tx-02002207350200000000
    Nonetheless, you should still call up Optimum just to make sure in case your issue differs from the issue I had.

Maybe you are looking for