Send an email from the portal

How do I send an email from the portal?
Is there support for the IMAP protocol?
Thank you for any and all help,
Geoffrey

WLS has support for the JavaMail standard. That's SMTP on the send side and
IMAP (or others like POP3) on the receive side. Portal does not have the end
all, be all IMAP client nor does it have a full featured SMTP client to compose
mail but the sample portlets have a start.
Geoffrey wrote:
How do I send an email from the portal?
Is there support for the IMAP protocol?
scott dunbar
bea systems, inc.
boulder, co, usa

Similar Messages

  • Sending encrypted emails from the iPad is not working

    I can't get sending encrypted emails working on my iPad3 running iOS 8.0.2
    Let me explain what I did:
    1. I created S/MIME certificates for 2 email addresses on my iMac in Keychain Access. One email address exists only on the iMac the other only on the iPad.
    2. I set "When using this certificate" to "Always Trust" in both certificates.
    3. I exported 1 S/MIME certificate (p12) and installed it on the iPad. Then I deleted this certificate and its private&public keys in iMac Keychain Access
    4. I exchanged public certificates between the 2 devices. I installed one certificate in iMac Keychain Access and the other in iPad/Settings/General/Profiles.
    5. On the iMac in the iPad certificate I set "When using this certificate" to "Always Trust"
    6. I tested whether I can send and receive signed and/or encrypted emails
    Results:
    1. From the iMac I can send signed and/or encrypted emails to the iPad.
        On the iPad I can read the encrypted emails. The signature is not trusted
    2. On the iPad I can send signed messages to the iMac. On the iMac the signature is trusted.
        I cannot send encrypted emails from the iPad to the iMac. The iPad doesn't know about the public certificate in iPad/Settings/General/Profiles
    So much for the straight forward part. Now it gets a bit more complicated and confusing.
    1. I deleted the iMac certificate in the iPad/Settings/General/Profiles. Then in iPad Mail I opened the signed mail coming from the iMac.
        I viewed the untrusted certificate in Mail and installed it. From this point on all signed emails from the iMac are trusted.
        Strangely the by this method installed certificate doesn't appear in iPad/Settings/General/Profiles.
        Furthermore I still cannot send encrypted messages to the iMac. This certificate installation seems to be used only to check trust worthiness of the signature.
        Installing on top the iMac public certificate in iPad/Settings/General/Profiles doesn't enable to send encrypted messages from the iPad either.
    To be sure that this problem relates to the iPad certificate management and is not related to an error by me I did the following:
    1. I transferred a p12 file for a certificate that I created in my iMac to a PC running Windows7.
    2. I transferred a p12 file plus its public key (.pem) that I created in my iMac to another iMac into Keychain Access. (I have not tested if the pem is needed).
    3. On the other iMac and the PC I made sure that the certificates are trusted.
        On the PC that means in the Certificate Manager the p12 needs to be in the "Personal" folder and in the "Trusted Root Certification Authorities" folder.
        The public keys need to be in the "Trusted People" folder and the "Other People" folder. One can just copy/paste the certificates.
    4. In both cases I deleted the certificate and public/private keys on my iMac.
    5. I exchanged public certificates between the devices.
    6. I tested exchanging signed and/or encrypted emails between my iMac and the PC and my iMac and the other iMac.
    Result:
    1. I can send signed and/or encrypted emails to the other iMac and the PC
    2. The PC and the other iMac trust the signature from my iMac and can read the encrypted emails
    3. My iMac can read encrypted emails from the PC and the other iMac
    4. My iMac trusts emails with signatures from the PC and the other iMac.
    Everything is working as it should.
    After the above test I wanted to see whether I can set up encrypted email exchange between the iPad and the PC. Strangely iPad Mail recognized the public certificate from the PC installed in iPad/Settings/General/Profiles and allowed me to send an encrypted email to the PC. However, on the PC I was unable to read the encrypted email. And the other way around, encrypted emails send from the PC to the iPad cannot be read on the iPad.
    My conclusion from all this testing is that iPad mail encryption is still "under construction".

    I was able to resolve the above described problem to some degree. Setting up sending and receiving encrypted emails between iOS and OSX I have working.
    What is still not working is reading encrypted emails on the iPad/iOS8 received from Windows 7 PC. And sending encrypted emails to Windows 7 PC.
    The details about how I solved part of the problem are described here.

  • Is there a way to send an email from the web gallery module

    Hi all,
    does anyone know if there is a way to send an email from the webmodule, for example to send the link where the gallery was posted?
    Thanks for any help.
    Bart

    I'm certainly not aware of any way, thus my post here (please cast a vote):
    http://feedback.photoshop.com/photoshop_family/topics/lightroom_sdk_email_support
    I don't know if you could get away with using LrHttp to open a mailto link.
    The only other option I know is to send data to your web server and have it send SMTP.

  • Sending an Email from the app along with table data

    Hi All,
    I would like to send an email from my app. I tried to put in the field attachment SQL this query: select * from Table_Name where id = (select max(id) from Table_Name) but it did not work. It showed me this error:
    1 error has occurred
    Wrong number of columns selected in the SQL query. See Help of attribute for details.
    I would like to send an email every time the user insert a row with that row in the email... How can I do that?
    Thank You.

    What I would suggest is the following:
    Build an After Insert Trigger on the table in question. In this trigger build a string with ALL the columns that are being inserted into the table. Then you will need to build some local variable to submit your mail. You will send your e-mail via UTIL_SMTP mail, since you may NOT always being in an APEX application when the table is updated..
    Ask away if you have more questions..
    Thank you,
    Tony Miller
    Webster, TX
    I am a Ranger! We walk in the dark places no others will enter! We stand on the bridge and no one may pass! We live for the One, we die for the One!
    If this question is answered, please mark the thread as closed and assign points where earned..

  • Cannot send some emails from the address book. Comcast says it is not a server problem.

    Keep getting this message when trying to send a group email from the address book -"The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent, try to reduce the message size or wait some time and try again. The server responded: 4.1.1... temporary failure."
    Comcast has checked it - the issue is not the server they say. This problem just started 4 days ago. It appears other people have this problem on the thunderbird forum and it has not been resolved yet.

    The Comcast server is issuing the error message. Have them explain how this is not their problem.

  • How to send an email from the database

    i have create a post insert trigger at the database level for the emp table and that trigger call a procedure and that procedure send a email to the new employee, i the trigger send the firt name , second name , last name and the email address to the procedure .so my questions is about the command that will send the email to the new employee ,and the send email will look like this
    Dear "fist name "second name" "last name"
    welocme to..........................................................

    This thread could help answer some of your questions:
    http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:2391265038428
    C.

  • I deleted my old Email account because I wanted to create a new one, and I did. However, when ever I send an Email from the Mail app on my laptop it says the Email was sent from my old Email and I just can not get rid of it.

    I deleted my old Email and only used my new Email to set up the Mail app on my laptop. And the old Email is completely dead, hotmail.com says the Email no longer excists when I try to sign back in to it however my Emails remain saying 'Sent from Jordan [*old Email*].
    I can't find a solution!!

    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • Sending  a  Email  from the  webdynpro application

    Hi Guys,
                 I   am having  one requirement in my application .ie. Email  to the  specified  Id .
    As  per   my reqirement  i am having  4  fields  in my  UI page.
    Task Id              : T001 
    Assigned to       : ratnakar   
    Mail id               : [email protected]
    Task Description : Test Area
    Submit : Save(Button)
    when i  click  the  Save button the    Email has to reach the  specified id with the  task description.
    could  any  body  please help  how to proceed .........
    Thanks  and Regards
    Ratnakar reddy

    Hi  Guys,
         Some body  sugested me  to use the  javaMail  api .. i donot  exactly how to use  it in the  webdynpro application. some where i got the  below  code ...
    InitialContext ctx = new InitialContext();
    Properties props = new Properties();
    props.put("mail.smtp.host","Message server");
    Session sess = Session.getInstance(props);
    Message message = new MimeMessage(sess);
         message.setFrom(new InternetAddress(wdContext.currentContextElement().getFrom()));
         String recepient = wdContext.currentContextElement().getTo();
         message.setRecipient(Message.RecipientType.TO, new InternetAddress(recepient));
         String subject = wdContext.currentContextElement().getSubject();
         message.setSubject(subject);
         String content = wdContext.currentContextElement().getMessage();
         message.setContent(content,"text/plain");
    //       Send the message
         Transport.send(message);
    if i use the above same code  i am not able resolve  some errors with  the  session and   internetAddress. becuse  there are  no   supporting Imports  to  handle them even if used the  Organise imports.
            i am  very new  to  this  mailing concept  can any body  give me a    step by step process  ...to  send the mail to the  specified in the  user interface.
    Thanks and regards
    Ratnakar

  • I can't send pop email from the iPad.

    I can receive but not send email through a POP account on the iPad.

    Great.  thanks for sharing.  Now do you have a question or are you just blurting out random sentences?

  • Can I send an email from the text message app?

    Can a text message be addressed to an e-mail address and sent there? (IPhone 5, ios7)

    OK....
    Problem is, the message goes through as a text message to the recipients phone. It doesn't appear that it actually goes to their email account? Am I missing something?

  • Couldnt send an email from europe

    First time ipad user in europe on vacation and using at&t could not get an email to to senders.

    WLS has support for the JavaMail standard. That's SMTP on the send side and
    IMAP (or others like POP3) on the receive side. Portal does not have the end
    all, be all IMAP client nor does it have a full featured SMTP client to compose
    mail but the sample portlets have a start.
    Geoffrey wrote:
    How do I send an email from the portal?
    Is there support for the IMAP protocol?
    scott dunbar
    bea systems, inc.
    boulder, co, usa

  • On my iPad I have installed the update ios 7.0.4 and now I can't send emails from the mail app is it just me or a problem with the update?

    On my iPad I have updated the software to iOS 7.0.4 and now I can't send any emails from the mail app.  Is this me or the update?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Is it possible to read , send emails from the database in oracle8.

    Hi,
    My present project needs me to send emails from the database through procedures. There is an oracle package UTL_HTTP in oracle8 which could be used to read emails from database. So kindly tell how to go about sending an email from the database. Is this feature available in Oracle8i.
    Thank you.

    Okay , Here's my Javascript wgich is in an onload process.
    Javascript variable addr_str displays the correct result.
    My hidden field is called P101_CHECKVAL.
    <html>
    <title>CodeAve.com(JavaScript: Display All URL Variables)</title>
    <body bgcolor="#FFFFFF">
    <script language="JavaScript">
    <!--
    // Create variable is_input to see if there is a ? in the url
    var is_input = document.URL.indexOf('P101_CHECKVAL:');
    // Check the position of the ? in the url
    if (is_input != -1)
    // Create variable from ? in the url to the end of the string
    addr_str = document.URL.substring(is_input+1, document.URL.length);
    // Loop through the url and write out values found
    // or a line break to seperate values by the &
    for (count = 0; count < addr_str.length; count++)
    if (addr_str.charAt(count) == "&")
    // Write a line break for each & found
    {document.write ("<br>");}
    else
    // Write the part of the url
    {document.write (addr_str.charAt(count));}
    // If there is no ? in the url state no values found
    else
    {document.write("No values detected");}
    -->
    </script>
    </body>
    </html>
    Everytime I put the HTML_get code into the javascript, it basically tells me I have an error on the page. So what exactly do I put that sets P101_CHECKVAL equal to the value of addr_str?

  • Can i send a email from application without using exchange server?

    Hello
    I am developing a 3 tier application using EJB, JSP....and i want to incorporate the mail sending facility.
    Can i send a email from the application without using exchange server?
    plzz help!!!!
    Pavan

    You will require some kind of SMTP server to be able to send mail from your app (not necessarily M$ exchange.) Just look for mail servers for the platform of your choice.
    Vijayan

  • Cannot send email from the Mail App?

    I've had an izymail subscription for 1 year and just renewed it last week. I could never send an email from my Mail App without a window popping up stating "izymail cannot connect to the server" and the sending bar (along the bottom of the screen) just freezes and will not send.
    I've a Hotmail account linked up to izymail. Anyone know how to fix this problem?

    I fixed my problem - I deleted my email account on my iPhone, then tried to setup a new account. I had a few problems setting it up. It wouldn't recognize the incoming or outgoing servers and I lost my email altogether for a few hours. Then I changed every setting possible and finally figured out that I had 2-3 "Other SMTP Servers" as well as my "Primary Server". Once I deleted the Other SMTP Servers, my email worked and i'm able to send emails now!
    I also think changing the "Server Port" number helped solve my problem also, and making sure "Use SSL" was turned off.

Maybe you are looking for