Send button not working when text message

When I was texting message with my friends, all of sudden I can't type the respond message unless I have to quit and try to text my friend again. The problem is the box where you typed your message is gray out and "Send" button is inactive or gray out. This problem occurs when I upgraded my iphone 4s to iOS 6.1
Please help.

After Update today, SEND button no longer activates keyboard. I tapped message window area and that activated the keyboard. SEND button worked to send message. (Not sure how to describe that "message window area", but its the area where your message shows as you type.)

Similar Messages

  • Delete prior and Mypin does not work in text messages

    So as the subject line states delete prior and typing mypin to generate....wait for it...... my pin, both do not work in the text messaging platform.  Anyone else experience this and anyway to fix this?  My provider will swap my phone on monday but if there is a fix I wont need to make the trek.  Thanks

    Autotext and delete prior is not working in SMS messages. These are known issues and will hopefully be fixed in a future OS update.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Layered menu buttons not working when built.

    I have a project that has one menu and one track. The menu has 7 buttons linked to 7 different markers in the track. When I run the simulation in DVD SP, the buttons link fine, and play as they should...but when I build the project and run it in DVD player or burn it to a disk, the buttons do not work.
    If I create a non-layered menu, the buttons will work when built...
    I feel like i'm just missing one little setting on the layered menu
    Thanks
      Mac OS X (10.4.8)  

    Don't forget that a layered menu will normally need two presses to get anything to happen, one to select the button and the second to activate it.
    That said, are you sure that you have got the psd file set up correctly? I would recommend using a background layer with everything on it that you want to appear when not selected, then only adding layers with the changes necessary to show the button selection/activation.

  • SP2013: OK button not working when editing Settings on List app

    Hi, all!  Currently running Sharepoint 2013 under Server 2008 R2.  My client is Win7 Pro/64-bit running lastest Firefox, Chrome & IE11.  I am currently a Domain Admin for our corp domain.
    Long story short, I've created a test List app.  When I attempt to add a column to the layout of the custom list app, nothing happens when I click the OK button to save the app.  No access spinning, no errors on-screen (also none visible when I view
    the source of the SP page or header), no nothing.  The highlight of the button changes as expected, but nothing else.  The Cancel button will Cancel as expected, but OK does nothing whatsoever.
    My current permissions include member of Domain Admins, Site Owners (Full Control), and Visitors (Read).  A Check Permissions on myself yield the following:
    Full Control   | Given through the "~site~ Owners" group.  
    Read   | Given through the "~site~ Visitors" group.  
    Edit   | Given through the "~site~ Members" group.  
    (Note: "~site~" is replacing the actual SP2013 site name above)
    I'm thinking it has something to do with effective permissions.  I just added myself to the Owners group this morning with no effect.  I've also tried both Compatibility mode on and off in IE, and Firefox and Chrome don't work, either.  Suggestions
    are most welcome as I'm at the point where I'm not sure if IE11 is causing a problem or if it's actually an effective permissions problem that's preventing me from saving any column changes to the List app above.
    Thanks, guys!
    Steve

    Hi Steve,
    From your description, my understanding is that OK button does not work when you create a new column.
    Please check if you get any JS error after you click OK button by pressing F12 to OP developer tool.
    Besides, please try to create a new column with steps below:
    1.      
    Click LIST tab in the Ribbon.
    2.      
    Click Create Column in Mange Views section.
    3.      
    Create your column in the dialog.
    4.      
    Click OK button.
    In addition, please confirm these points below:
    1.      
    Test your issue in another list.
    2.      
    Test your issue with another computer.
    3.      
    Test your issue with another account.
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Exit button not working when entering wrong date

    how do I get the message not to appear by day Invalid (Frm-50004) in forms

    dear Shrikant,
    i have one item start_date whose data type is Date and format mask is DD/MM/RRRR ,
    when i m entering worng date it is showing below message which i kept on ON-ERROR trigger of start_date item with an error code 50004 ;
    "FRM-50004: Day must be between 1 and last of month."
    as i m entering wrong date i want to exit my form but my exit button is not working properly.
    The message appears several times, about 3 or 4 times, because the focus is on the text item to the date, and is firing the trigger ON-ERROR, debugging the code, you notice that after the message back running the line "IF", because the error frm-50004 can not be erased, is giving this error all the time because the focus is on her text item!
    i have kept my push buttons mouse and keyboard navigation property to "NO".
    then also it is not working tell me if any solution is there.

  • "Send" button not working in Mail

    Picked up Leopard on an iMac two days ago. Some of the time when I compose a new email, Mail works fine--I click "send" once I'm through typing and out it goes.
    Other times--like this morning--I try to send an email and the "send" button is transparent and does not click. This is not a server issue. I tried adding the recipients to my address book in case there was some weird thing where that had to be done first. But to no avail--the "send" button won't click, nor will the "send" command within the toolbar or drop-down menus--and so I have no clue how I'm supposed to send this email if the button to do it is not working. Help!

    Unfortunately, the SMTP and outgoing mail settings aren't the issue. The issue is that the "send" button is visible but un-clickable. I tested sending mail from all of my accounts and it works just fine--sometimes. Other times, I try to reply to an email or send out a new one and the "send" button does not allow me to send anything at all.

  • Buttons not working when implimented using Adobe Configurator

    Hi there, i recently learned about a new program called Adobe Configurator, which allows you to build your own custom panels for Photoshop. The program is brilliant, a brilliant idea, and all seems to work perfectly. However, its connection to Photoshop in only two buttons that i have tried to use, seems to fail.
    I set up two of my custom buttons to follow the path of "File > Share My Screen...", and the other to follow the path of "File > Device Central...". However, weather i have a document opened or not, these buttons never work. I get the error message saying "The command "Select" is not currently avalible.". It says this with other buttons, but only when there is nothing open, so it is understandable. So do these buttons just not work, or am i doing it wrong?
    Thanks.

    That's a limitation of many PDF readers on the iPad. They don't support interactivity well. There are a few that do. Here's a posting on InDesignSecrets.com that I did on the subject of differences between PDF readers:
    http://indesignsecrets.com/finding-the-best-tablet-pdf-reader.php
    My favorite is PDF Expert. However, I later found I had to outline the type if I used them in an InDesign-created button.

  • In MSS PCR Send button not working

    Hi,
    We are trying to implement ESS/MSS 1.0 SP 8 on EP 7.0 SP 11 and ECC 6.0. We are using the application on https. SSL has been configured and is working fine. We are using PCR under MSS, which also runs on https. SSL for ADS has been configured and we are able to see the PCR pdf forms. Now when we try to edit the form, and click Send button (Review Form and Save phase) its going on to the Completed page, rather remains in an un ending state. The Completed page is not showing up. We tried to use the application on http and everything is working fine.
    Please help.
    Regards,
    Piyush.

    Solution:
    When you configure HTTPS make sure you dont get a popup window of the certificate and even if you get all the three items (like trusted name, expiry etc) should be green and no warning.
    Regards,
    Piyush.

  • TS3274 Send button not working

    I'm trying to send a message but send button is not working. It's always either light blue or gray. Help!

    Make sure both parties have enabled iMessage
    Settings>Messages>iMessage>On

  • Powershell Script Send-zip not working when running in cmd

    I found there is powershell send-zip script available in technet.  I tested it and found that it works when the script is running under powershell env, but when it is calling in cmd env, I can see the zip file, but there is nothing in it.  If
    I add the "-noexit" switch it runs normally.  Anyone have ideas what might be happening?
    The orig codes is as following:
    function global:SEND-ZIP ($zipfilename, $filename) { 
    # The $zipHeader variable contains all the data that needs to sit on the top of the 
    # Binary file for a standard .ZIP file
    $zipHeader=[char]80 + [char]75 + [char]5 + [char]6 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0
    # Check to see if the Zip file exists, if not create a blank one
    If ( (TEST-PATH $zipfilename) -eq $FALSE ) { Add-Content $zipfilename -value $zipHeader }
    # Create an instance to Windows Explorer's Shell comObject
    $ExplorerShell=NEW-OBJECT -comobject 'Shell.Application'
    # Send whatever file / Folder is specified in $filename to the Zipped folder $zipfilename
    $SendToZip=$ExplorerShell.Namespace($zipfilename.tostring()).CopyHere($filename.ToString())
    SEND-ZIP C:\abc\a.ZIP C:\a\a.bak

    I've had the same problem with similar code found on another web site.
    The reason the zip file ends up being empty is that the temporary $ExplorerShell object you created is deleted when the send-zip function returns,
    and any incomplete copy operation that may still be ongoing at that time is aborted. (The copy operation is asynchronous, and continues after the CopyHere() function returns.)
    To work around this, you need to add a delay loop before you return, waiting for the copied object to appear in the zip.
    (Note that adding a fixed delay, like I've seen on other web sites, does not work: Small files appear almost immediately, whereas large file or worse still large subdirectory trees can take a long time to appear.)
    Try changing the end of your routine to something like...
    # Create an instance to Windows Explorer's Shell comObject 
    $ExplorerShell=NEW-OBJECT -comobject 'Shell.Application' 
    # Open the zip file object
    $zipFile = $ExplorerShell.Namespace($zipfilename.tostring())
    # Count how many objects were in the zip file initially
    $count = $zipFile.Items().Count
    # Send whatever file / Folder is specified in $filename to the Zipped folder $zipfilename 
    $SendToZip=$zipFile.CopyHere($filename.ToString())
    # Wait until the file / folder appears in the zip file
    $count += 1 # We expect one more object to be there eventually
    while ($zipFile.Items().Count -lt $count) {
        Write-Debug "$filename not in the zip file yet. Sleeping 100ms"
        Start-Sleep -milliseconds 100
    # Return deletes the $zipFile object, and aborts incomplete copy operations.

  • HT204387 I have a new Iphone 5 and my bluetooth capabilty with my Mercedes E550 is not working for text messaging.  Mercedes says it's a phone issue.  Has anyone else experienced this and did you find a solution?

    Iphone 5 bluetooth texting is not working in my Mercedes E550; Mercedes says it's a phone issue.  Any ideas or suggestions?

    If your question regards the ability of your Mercedes to access the text messages in your phone, the most likely answer is that your vehicle's audio system does not support the Message Access Profile. This Bluetooth profile was adopted in June of 2009, which means that Mercedes Benz wasn't implementing this capability mid-year.
    Your Merc simply will not be able to access those messages.
    If the dealer can do an update of the Firmware, it might improve the capability. But the expense of that might outweigh the ability to gain access to your texts. This is to say that there is even an upgrade possible. This is a major addition to the Bluetooth capabilities.
    FWIW, up until recently, most cars havn't had this capability. The earliest adopters were Ford and BMW.
    -D

  • Send button not working on sms after upgrade

    My send is no longer working on sms after i upgraded. I have done factory setting and still not working . Any ideas of anything else i can try ? frustrated

    I have same problem. Can open message. As if keyboard is frozen.
    Unable to type then send. Also, tried shutting off preview.

  • Send button not working on Droid

    I have a customer trying to sign a document using a Droid. They can fill in the signature but the Send button is not working.

    Hi,
    Please can you contact support , https://echosign.zendesk.com/hc/requests, and provide them with as much detail on the issue as possible including any screenshots. They can then investigate this for you.
    Thanks,
    Jat

  • Send button not working in imessages

    I'm trying to send a test message to myself in imessages.  I type the message but the 'send' button never gets enabled

    Try here:
    iOS: Troubleshooting Messages
    Also, I am not sure you can send one to yourelf.

  • XML Data Button Not working when Exported onto BusinessObjectEnterprise

    I have an XML data button on a dashboard. It works fine in preview and on web. It does not work if it is exported onto Business Object server using XCelsius' Export to  BusinessObjectEnterprise.
    In the InfoView, I double click on the flash file, the flash files opens as expected, but when XML Data button is clicked, no new data seem to come in...
    If I export as Adobe file, and then post it onto the server, and view it using Info View, the XML data button works just fine.
    Please advise.

    Hi All,
    Even I have similar requirement.
    Any work around is appreciable.
    Thanks
    Vinod

Maybe you are looking for